Radio Degen De1103 6l4l39
This document was ed by and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this report form. Report r6l17
Overview 4q3b3c
& View Radio Degen De1103 as PDF for free.
More details 26j3b
- Words: 4,053
- Pages: 15
DE1103
PLL FM STEREO/SW.MW.LW DUAL CONVERSION SYNTHESIZED WORLD RECEIVER
PLL FM STEREO/SW.MW.LW DUAL CONVERSION SYNTHESIZED WORLD RECEIVER
DE1103 OPERATION MANUAL
POWER SUPPLY
INDEX POWER SUPPLY ..........................................................1 POWER INDICATION ....................................................3 BATTERY CHARGER ....................................................4 BEFORE OPERATION.. .................................................6 SET THE CLOCK ..........................................................7 TURN ON OFF THE UNIT ...........................................8 VOLUME CONTROL & LOCAL / DX SWITCH ...................9 BAND
METER BAND CONVERSION............................10 SET SLEEP TIME .........................................................11 SET ALARM ON OFF ................................................. 12 TUNING INTO A STATION............................................. 14 PRESET STATIONS ..................................................... 18 DELETE STATIONS. .................................................... 19 HOLD & BACKLIGHT ................. .................................. 20 TONE SELECTION & NARROW/WIDE BAND ..................................21 RESET & LINE OUT ..................................................... 22 EARPHONES & FOLDING STAND ................................. 23 RECEIVING SSB / CW ................................................. 24 USING ANTENNA ........................................................ 25 SPECIFICATIONS........................................................ 27
OPERATING ON BATTERY BATTERY INSTALLATION 1. Slide the battery lid. 2. Insert four AA batteries with correct polarity as shown in the compartment. 3. Close the lid of compartment.
Disconnect the AC adaptor plug with the unit while using batteries to supply power. Do not try to recharge no-rechargeable batteries. Do not mix old batteries with new ones. When the unit is not being used for a long period of time, remove batteries to avoid damage from battery leakage and corrosion. If battery leakage occurs, wipe the battery compartment with a soft cloth before inserting new batteries.
BATTERY REPLACEMENT 1. When the sound becomes weak and distorted, battery power indicates , replace batteries or charge the batteries immediately, otherwise the unit will shut off automatically. 2. All memories are permanently stored. However, when the power supply is broken off, the clock reverts to the default setting 0:00, it needs to be reset. 3. The clock time will not lose if you replace new batteries in 3 minutes.
1
POWER INDICATION
POWER SUPPLY OPERATING ON AC
Left side
Lower
Medium
More
Full
6V
LO
DX
AM ANT
Power indicator is a trapeze pattern, it is hidden when receiving programme. can check power level by press VOL .
1. Plug the adaptor into a 220V AC power outlet. 2. Insert the adaptor s small connector plug into the DC JACK 25 . If use AC adaptor to supply power, adaptor surface may a little heat. If the AC adaptor is connected, the unit automatically switches to the AC adaptor power, and installed batteries are no longer in use. Disconnect the AC adaptor with the outlet,if the AC adaptor is not being used. The backlight will keep on illuminated when using AC adaptor. Remove the batteries if you want to use AC adaptor for a long period of time. Only Supplied AC adaptor should be used for this unit.
2
If the power is exhausted, the unit will turn off automatically. When using rechargeable batteries, if to be recharged.
3
appears, batteries need
BATTERY CHARGE
BATTERY CHARGE
Install four AA rechargeable batteries with correct polarity. 2. Plug the adaptor into an 220V AC power outlet, connect the other side securely to DC Jack 25 . 3. In power off mode, hold down button VOL , in the meantime turn jog dial wheel TUNE to set charging time from 1~23 hours, then release button VOL , charging starts. Or press number button to input charging hours directly, then quickly press button VOL to confirm. 4. Indicator flashes during battery charging. 5. When preset charging time reaches, the unit stops charging automatically.
CAUTIONS If constantly displays, the unit is in charging process. Please select high-quality rechargeable batteries. When using new rechargeable batteries or those which have not been used for a long time, charge them fully, then use them until they have completely run down. Repeat this cycle two more times, then those batteries can be used normally. Do not leave fully charged batteries unused for a long time. Do not mix old batteries with new ones.
Notes: 1. Charging time should be set in power off mode, but you can turn on the unit and listen programme during charging process.
!
Do not try to charge dry batteries, avoid batteries leakage or explosion
2. There is no effect on battery charge if the unit is alarm on during charging. 3. Charging time can be calculated as: Charging hours = Battery Power (mAH) / 100mA ( charging current). 4. In power off mode, hold down VOL to check rest charging hours. 5. Battery charge will be terminated once the setting charging hours reaches. 6. Do not charge the batteries with fully power.
4
5
BEFORE OPERATING
SET THE CLOCK
Check Batteries/AC Adaptor
Display Time
Check if batteries are inserted with correct polarity. Check if AC adaptor is connected in correct way. Please use supplied AC adaptor only.
1. When the unit is off, current time indicates in the display. 2. When the unit is on, press to display current time 5 seconds. TIME
Set The Clock Check Hold Button If appears in the display, the unit is locked. All buttons except HOLD button become inoperative. Unlock it to resume operation(Details refer page 20).
The default time of this unit is 0:00, time has to be set in power off mode. 1. Hold down button for 2 seconds to set hour, hour number flashes for 30 seconds. 2. While hour number is flashing, turn the jog dial TUNE to set current hour. 3. After hour setting, press to set minute, minute number flashes. 4. Turn jog dial wheel to adjust minutes. 5. After setting, press to confirm. TIME
TIME
Check Local/DX Button Normally, set Local / DX button to DX position
23
.
TIME
M/F
STORE
VOL
AL1
AL2
CHG
DEGEN
SSB/268MEMORIES
2. /4. 1
2
PLL FM STEREO/SW.MW.LW DUAL CONVERSION DE1103 SYNTHESIZED WORLD RECEIVER
3
4 HOLD
SLEEP
RESET
5
6
7
TIME
SSB
DEL
ST/MO
8
9
0 BAND+
FM
SCAN
AM
1. /3./5. Please go to next step within 30 seconds, or the time setting will be invalid.
6
7
TURN ON OFF THE UNIT
VOLUME CONTROL & LOCAL/DX SWITCH
Volume Control
Power On / Off the unit to turn on the unit manually, press again to turn it off. Each time turn on the unit, it will receive the last station you ever heard. SLEEP
SLEEP
The volume is divided to 64 levels 0~63 , default level after reset the unit is level 40. When adjusting volume, corresponding level number appears in the display. Method 1
Turn on the unit, press VOL , VOL flashes for 3 seconds, turn jog dial wheel to adjust volume.
Alarm On / Off Two groups of alarm on /off time can be set in 24 hours. Station, volume can be set as well. The unit will turn on at preset time and will turn off after preset off time reaches. After setting, indicator AlARM 1 AlARM 2 constantly appears (Details refer to Page 12
VOL
MEM
STORE
CHG
AL1
AL2
DEGEN
SSB/268MEMORIES
+
VOL
Method 2
-
Press number button to input volume level directly, then press to confirm. For example: set volume to level 30 1
2
PLL FM STEREO/SW.MW.LW DUAL CONVERSION VOL DE1103 SYNTHESIZED WORLD RECEIVER
Sleep Timer
3
4
5
HOLD
SLEEP
Sleep time can be select from 1-99 minutes. After setting, indicator SLEEP constantly appears, when preset sleep time reaches, the unit will turn off automatically.(Details refer to Page 11).
+
RESET
6
7
TIME
SSB
DEL
ST/MO
3
8
9
0
BAND+
FM
SCAN
AM
0
VOL
Please go to next step within 3 seconds.
DX
Local /Dx Switch ALARM1
LO
ALARM2
M/F
STORE
VOL
AL1
AL2
CHG
In SW or MW band, set LOCAL/DX switch a proper position will increase reception.
23
to
DEGEN
SSB/268MEMORIES
SLEEP ALARM1 ALARM2
Generally, set the switch to DX position, unless there is a strong interference or when you are listening to local stations.
SLEEP
NOTE 1
2
PLL FM STEREO/SW.MW.LW DUAL CONVERSION DE1103 SYNTHESIZED WORLD RECEIVER
3
4 HOLD
SLEEP
RESET
5
6
7
TIME
SSB
DEL
ST/MO
8
9
0 BAND+
FM
8
SCAN
AM
If LOCAL/DX switch is set to LOCAL position, some strong signal stations may receive clearly, but most weak signal stations can not be received.
9
BAND
METER BAND CONVERSION
Band Conversion After turn on the unit, press or repeatedly to select your desired band, band indicator shows corresponding band in the display.
SET SLEEP TIME can set sleep time from 1~99 minutes with the unit on or off either.
BAND+
FM
75 90
MW
M
49M
60M
41M
Method 1 1. Press number button to input sleep time, the input number appears for 3 seconds. 2. Press to confirm within 3 seconds. 3. Indicator SLEEP constantly appears in the display, sleep function works, when the setting sleep time reaches, the unit will shut off automatically. SLEEP
13M
M/F
STORE
VOL
AL1
AL2
CHG
16M
19M
22M
25M
31M
3.
DEGEN
SSB/268MEMORIES
FM
MW
75 90
M 60M 49M 41M 31M 25M 22M 19M 16M 13M
108 1710 106 1600 4.0
12.4 14.4 15.9 18.0 21.9 5.4
6.4
7.4
9.9
3.9
5.3
6.3
7.3
9.8
3.8
5.2
6.2
7.2
9.7
100 1240 3.7
5.1
6.1
7.1
9.6
104
1510
98
1330 1150
94 92
970 880 790
76
1
610 520
2
PLL FM STEREO/SW.MW.LW DUAL CONVERSION DE1103 SYNTHESIZED WORLD RECEIVER RESET
CHG
DEGEN
SSB/268MEMORIES
SLEEP
12.0 14.0 15.5 17.6 21.5 3.6
5.0
6.0
7.0
9.5
3.5
4.9
5.9
6.9
9.4
3.4
4.8
5.8
6.8
9.3
3.3
4.7
5.7
6.7
9.2
3.2
4.6
5.6
6.6
9.1
11.9 13.9 15.4 17.5 21.4 11.8 13.8 15.3 17.4 21.3 11.7 13.7 15.2 17.3 21.2 11.6 13.6 15.1 17.2 21.1 11.5 13.5 15.0 17.1 21.0
3
4 HOLD
SLEEP
VOL
AL2
12.1 14.1 15.6 17.7 21.6
700 90
STORE
12.2 14.2 15.7 17.8 21.7
1060 96
M/F AL1
12.3 14.3 15.8 17.9 21.8
1420 102
5
6
7
TIME
SSB
DEL
ST/MO
8
9
0 BAND+
FM
SCAN
AM
1
2
1
2
PLL FM STEREO/SW.MW.LW DUAL CONVERSION DE1103 SYNTHESIZED WORLD RECEIVER
3
4 HOLD
SLEEP
RESET
5
6
7
TIME
SSB
DEL
ST/MO
8
9
0
1.
BAND+
FM
SCAN
AM
2. Method 2 1. Hold down , turn jog dial as well to select sleep time. Indicator SLEEP constantly appears in the display. SLEEP
Indicator SLEEP will constantly display after sleep time is set. You have to go to next step within 3 seconds, otherwise, the unit will exit from sleep time setting.
10
11
SET ALARM ON
SET ALARM ON
OFF
In power off mode, two groups of alarm on/off time can be set in 24 hours. Station volume can be set as well.
Set Alarm 1 1. In power off mode, hold down button M/F for 3 seconds, hour number flashes. 2. Turn jog dial TUNE to set hour, then press M/F to set minutes. 3. Turn TUNE to set minutes, then press M/F to go into station number setting. 4. Turn TUNE to select stored station number, then press M/F to go into volume setting. 5. Turn TUNE to adjust volume, then press M/F to set auto off time(from 5~99 minutes). 6. Turn TUNE to set auto off time. 7. Press M/F to confirm setting. AlARM 1 constantly appears, when preset on / off time reaches, the unit will on / of automatically.
M/F
STORE
VOL
AL2
CHG
DEGEN
SSB/268MEMORIES
ALARM1
M/F
STORE
VOL
AL1
AL2
CHG
DEGEN 2./3./4. /5./6.
SSB/268MEMORIES
1./7. 1
2
PLL FM STEREO/SW.MW.LW DUAL CONVERSION DE1103 SYNTHESIZED WORLD RECEIVER
3
4 HOLD
SLEEP
RESET
5
6
7
TIME
SSB
DEL
ST/MO
8
9
0 BAND+
FM
SCAN
Set Alarm 2 In power off mode, hold down button STORE for 3 seconds, hour number flashes. Other operations are same as Alarm 1 setting. 2. Finally, press STORE to confirm, ALARM2 constantly appears, when preset on / off time reaches, the unit will on / off automatically. If alarm 2 time is followed alarm 1, the setting of station and volume will supersede alarm 1. Alarm on/ off is valid when you are listening radio programme. If you do not change the alarm setting, it is still valid on next day.
Cancel Alarm On
Off
Cancel Alarm 1 In power off mode, press button M/F , the unit defaults last Alarm 1 setting. Press M/F again to cancel, indicator AlARM 1 disappears from the display.
ALARM 1
AL1
AM
Cancel Alarm In power off mode, press button STORE , the unit defaults last Alarm 2 setting. Press STORE again to cancel, indicator AlARM 2 disappears from the display.
Note Press
M/F
or
STORE
to skip one step or confirm last setting. 1
12
2
PLL FM STEREO/SW.MW.LW DUAL CONVERSION DE1103 SYNTHESIZED WORLD RECEIVER
3
4 HOLD
SLEEP
RESET
5
6
7
TIME
SSB
DEL
ST/MO
8
9
0 BAND+
FM
SCAN
OFF
AM
13
TUNING INTO A STATION
TUNING INTO A STATION You can use below 4 methods to find a desired station, when tuning into a AM station, appears to indicate signal strength. The more steps appear, the stronger signal it is.
JOG DIAL TUNING
DIRECT FREQUENCY ENTRY Direct frequency entry makes it extremely easy to tune into a station that you know its exact frequency. Frequency can be input without selecting band first. 1. Turn on the unit, press button 0~9 to enter frequency. 2. Press corresponding button to confirm: Press to confirm a FM band station, press to confirm a AM band station. BAND+
1. Turn on the unit, select desired band. 2. Press and turn the centre of the jog dial TUNE with one finger to quickly go to a desired station, watch the change of the frequency. 3. When near a station, you can use two fingers to turn the jog dial wheel slowly to find the exact frequency.
Sample 1 FM 89.80MHz 8
8
(FM band decimal point and last digitals of ignored.)
0
can be
Sample 2 AM 810KHz 8
DEGEN
9
1
0
BAND+
TUNE
+
Sample 3 AM 120KHz 1
2
0
BAND+
Sample 4 AM 10000KHz
SSB
DEL
ST/MO
WIDE
MUSIC NEWS
FINE
6
TIME
BAND+
FM
SCAN
AM
ON
5
LIGHT
4 HOLD
When use jog dial tuning, the frequency step for FM is 25K 7for 8 AM 9 is 0 1K. The highest turning speed is 80 step/circle.
OFF
3
NAR.
-
1
0
0
0
0
Next number has to be entered within 3 seconds after the fore number is entered. If an invalid frequency is entered, Err will appear in the display. The frequency step for direct entry is 1KHz for AM and 100KHz for FM.
LINE OUT
14
BAND+
15
TUNING INTO A STATION
TUNING INTO A STATION AUTO SCAN TUNING
MEMORY SCAN TUNING
1. Turn on the unit, change to your desired band. 2. Hold down or for more than 2 seconds, release when the frequency changes, the unit starts tuning into stations from current frequency. When a station is tuned in, scanning pauses for 3 seconds and the tuned station is heard. The scanning will continue if no further operation. 3. If a station is tuned in, you can use jog dial to fine tune. 4. Press any button to stop auto scan tuning.
Turn on the unit, press M/F to go into memory scan tuning mode, MEM appears in the display. 2.Turn the jog dial to tune into preset stations. 3. If you the preset number clearly, you can enter number button directly, and press M/F within 3 seconds to une into the station.
BAND+
M/F
STORE
VOL
AL1
AL2
CHG
DEGEN
SSB/268MEMORIES
ALARM1
M/F
STORE
VOL
AL1
AL2
CHG
DEGEN
SSB/268MEMORIES
M/F
STORE
VOL
AL1
AL2
CHG
DEGEN 2.
SSB/268MEMORIES
ALARM1
1. 3.
1
1
2
3
4 HOLD
SLEEP
RESET
5
6
7
TIME
SSB
DEL
ST/MO
8
9
SCAN
4
RESET
5
6
7
TIME
SSB
DEL
ST/MO
8
9
3.
0 BAND+
FM
SCAN
AM
0 BAND+
FM
3
HOLD
SLEEP
PLL FM STEREO/SW.MW.LW DUAL CONVERSION DE1103 SYNTHESIZED WORLD RECEIVER
2
PLL FM STEREO/SW.MW.LW DUAL CONVERSION DE1103 SYNTHESIZED WORLD RECEIVER
AM
2. Empty station number will be skipped automatically. If a empty station number is entered, indicator Err 1 2 3 4 5 6 7 8 will appear in the display.
1.
PLL FM STEREO/SW.MW.LW DUAL CONVERSION DE1103 SYNTHESIZED WORLD RECEIVER
HOLD
SLEEP
In auto scan tuning, the frequency step is 100K for FM 1K for MW and 5K for SW. The unit will scan within the frequency range of chosen band or meter band.
16
17
RESET
TIME
SSB
DEL
ST/MO
9
0 BAND+
FM
SCAN
AM
DELETE STATIONS
PRESET STATIONS There are total 255 stations can be preset in two area: convenience area or hidden area. All memories are permanently stored.
1. Turn on the unit hold down STORE . 2. At the same time, turn jog dial wheel, MEM flashes and frequency changes, find the station you want to delete. 3. Continue hold down STORE , and press button TIME , current station is empty, indicator MEM changes to VOL .
1. Turn on the unit, tune into a desired station by jog dial tuning, scan tuning or direct entry. 2. Hold down STORE , indicator MEM flashes. 3. Turn jog dial wheel to find a desired number. 4. Press STORE to store current frequency.
M/F
STORE
VOL
AL1
AL2
CHG
M/F
STORE
VOL
AL2
CHG
M/F
STORE
VOL
AL1
AL2
CHG
DEGEN
SSB/268MEMORIES
DEGEN
SSB/268MEMORIES
AL1
DELETE A SINGLE STATION
DEGEN
SSB/268MEMORIES
M/F
STORE
VOL
AL1
AL2
CHG
2.
1./3.
2./4.
1. 1
1
2
3
4
5
6
7
8
9
DE1103 SYNTHESIZED WORLD RECEIVER
HOLD
SLEEP
RESET
TIME
SSB
DEL
ST/MO
2
PLL FM STEREO/SW.MW.LW DUAL CONVERSION DE1103 SYNTHESIZED WORLD RECEIVER
0
3
4
5
HOLD
SLEEP
PLL FM STEREO/SW.MW.LW DUAL CONVERSION
DEGEN
SSB/268MEMORIES
RESET
6
7
TIME
SSB
DEL
ST/MO
8
9
0 BAND+
FM
SCAN
AM
BAND+
FM
SCAN
AM
3. Up to 100 stations can be preset in convenience area, from 0~99. 2 3 4 5 6 7 8 9 Total 156 stations can be preset in 1hidden area, from DE1103 0A~0F F0~FE. For short wave (SW) broadcasts, the frequence may different even for the same station at different time and period. Presetting different frequencies for the same station in the same area will let you tune into that station easily. If a preset number is already occupied, the new frequency with sam e preset number replaces the old one. PLL FM STEREO/SW.MW.LW DUAL CONVERSION SYNTHESIZED WORLD RECEIVER
HOLD
SLEEP
18
RESET
TIME
SSB
DEL
ST/MO
FM
SCAN
1 0
2
PLL FM STEREO/SW.MW.LW DUAL CONVERSION
4 HOLD
SYNTHESIZED WORLD RECEIVER
SLEEP
BAND+
AM
3
DELETE ALL PRESET STATIONS DE1103 RESET
5
6
7
TIME
SSB
DEL
ST/MO
8
9
0 BAND+
FM
SCAN
AM
Hold down and at the same time, then press RESET, all preset stations will be delete. HOLD
TIME
SLEEP
19
HOLD & BACKLIGHT
TONE SELECTION & NARROW / WIDE BAND
HOLD FUNCTION The hold function can be used to avoid any accidental operation when the unit is being carried or used. 1. Press button, indicator appears, hold function is activated, all buttons except HOLD button become inoperative. If the unit is on, press can turn off the unit. 2. Hold down button for 1 second to cancel hold function, disappears from the display.
3. Back light off Push the back light switch to OFF position, the backlight will off, push the switch to ON to resume back light function.
HOLD
TONE SELECTION
SLEEP
STEREO /MONO
HOLD
Stereo is suitable for strong signal music broadcast, mono is suitable for weak signal and voice program. Press button to convert between stereo and mono, the LCD will on when choosing stereo. SSB
HOLD M/F
STORE
VOL
AL1
AL2
CHG
DEGEN
SSB/268MEMORIES
NEWS/MUSIC Push the switch news or music.
1
2
PLL FM STEREO/SW.MW.LW DUAL CONVERSION DE1103 SYNTHESIZED WORLD RECEIVER
3
4 HOLD
SLEEP
RESET
5
6
7
TIME
SSB
DEL
ST/MO
8
9
14
to corresponding position when listen
0 BAND+
FM
SCAN
AM
NAR./WIDE 1./2.
BACK LIGHT FUNCTION There are 3 kinds of back light mode to select: normal always-on and back light off. 1. Normal press any button will start up the orange back light of the display and buttons. The back light will be off automatically if no further operation in 15 seconds. 2. Always-on If the power is supplied by AC adaptor, the back light will always on.
20
When listening AM band program, push NAR./WIDE switch to proper position will increase reception result. For this unit, the ist IF is 55.845MHz, 2nd IF is 450KHz. In AM band, push the NAR./WIDE switch 14 up to select WIDE , push the switch down to select Narrow Wide band has a better tone reception than narrow band, but it is noisier than narrow band reception.
21
EARPHONES & FOLDING STAND
RESET & LINE OUT
LISTENING WITH EARPHONES
FINE
When listening to stereo reception, normally use earphones, and the speaker will stop work automatically.
MUSIC LINE OUT
Notes On Earphones
LINE OUT You can output the radio broadcasting by connecting the unit to external appliance with a connecting cable inserted into LINE OUT jack. Volume adjustment and news/ music selection will not effect output.
MUSIC NEWS
WIDE
Pull out the folding stand in rear , extending the telescopic antenna straight upward.
OFF
ON
FINE
NAR.
Avoid using earphones at high volume, if you experience a ringing in your ears, reduce volume or stop using it. Set sleep time when listening radio before sleeping. Do not use earphones while driving or cycling, it can also be potentially dangerous to play your earphones at high volume while walking ,especially at pedestrian crossing.
USING FOLDING STAND
TUNE
LIGHT
EARPOHNE JACK
NEWS
Speaker has MONO effect only.
P9
If the unit operates erratically, press RESET to resume normal operation. Reset function will not erase all of the memories except the clock time.
SSB
RESET
LINE OUT
Line out jack
Connect external appliance
22
23
USING ANTENNA
RECEIVING SSB/CW 1. Turn on the unit, SSB signal can be received att the frequency range of 100~29999KHz. 2. Tune into a AM station with medium strong signal. 3. Press SSB button, turn jog dial to tune into a SSB frequency. 4. When find a SSB signal, tune the SSB FINE Knob to have the best reception.
FM Reception Telescopic antenna functions as FM antenna, keep it extended and change its length and direction to find the position which gives the best reception. FM
M/F
STORE
VOL
AL1
AL2
CHG
DEGEN
SSB/268MEMORIES
MW Reception
2.
4. 1
2
PLL FM STEREO/SW.MW.LW DUAL CONVERSION DE1103 SYNTHESIZED WORLD RECEIVER
3
4 HOLD
SLEEP
RESET
1.
5
6
7
TIME
SSB
DEL
ST/MO
8
9
0 BAND+
FM
SCAN
AM
3.
Ferrite antenna inside the unit functions as MW antenna, it is strongly effected by the reception direction. Therefore, when listening to MW broadcast, rotate the unit to find the position which gives the best reception.
MW
24
25
USING ANTENNA
SPECIFICATIONS Frequency Range
SW Reception Telescopic antenna functions as SW antenna. Extending the antenna straight upward to get the best reception. Normally, set the LOCAL/DX switch 23 to DX position when listening SW programme.
DEGEN
1
2
3
4
5
6
7
8
9
0
(SW)
External Antenna If FM or SW reception is too weak, use supplied extra- long external antenna to improve reception.
Keep the external antenna straight, insert one side to the ext. Jack 22 of the unit, another side outdoors.
Outdoors
FM
76.00 - 108.00 MHz
AM
100 - 29999 KHz
90m 75m 60m 49m 41m 31m
3.160 3.860 4.710 5.910 7.010 9.170
-
Do not use external antenna during a thunder storm day.
MHz MHz MHz MHz MHz MHz
25m 22m 19m 16m 13m 11m
. AM 2nd IF Wide band
6KHz
Narrow band
4KHz
5. Power Supply: Battery: 4 AA batteries External power: DC in 8v 300mA Recharging time: 1~23 hours 6. Speaker: 7. External Earphones:
D77mm D3.5mm Approx. Approx.
If the signal is too strong when using external antenna, set the Local/DX switch to Local position.
26
11.510 - 12.155 13.510 - 13.905 15.010 - 15.705 17.260 - 18.105 21.410 - 21.955 25.610 - 26.100
2. Noise Limit Sensitivity FM 10 V MW 1mv/m SW 20 V
8. Dimensions: 9. Weight:
!
3.455 4.055 5.105 6.255 7.405 9.995
27
165*105*29mm 300g (excl.batteries)
MHz MHz MHz MHz MHz MHz
PLL FM STEREO/SW.MW.LW DUAL CONVERSION SYNTHESIZED WORLD RECEIVER
PLL FM STEREO/SW.MW.LW DUAL CONVERSION SYNTHESIZED WORLD RECEIVER
DE1103 OPERATION MANUAL
POWER SUPPLY
INDEX POWER SUPPLY ..........................................................1 POWER INDICATION ....................................................3 BATTERY CHARGER ....................................................4 BEFORE OPERATION.. .................................................6 SET THE CLOCK ..........................................................7 TURN ON OFF THE UNIT ...........................................8 VOLUME CONTROL & LOCAL / DX SWITCH ...................9 BAND
METER BAND CONVERSION............................10 SET SLEEP TIME .........................................................11 SET ALARM ON OFF ................................................. 12 TUNING INTO A STATION............................................. 14 PRESET STATIONS ..................................................... 18 DELETE STATIONS. .................................................... 19 HOLD & BACKLIGHT ................. .................................. 20 TONE SELECTION & NARROW/WIDE BAND ..................................21 RESET & LINE OUT ..................................................... 22 EARPHONES & FOLDING STAND ................................. 23 RECEIVING SSB / CW ................................................. 24 USING ANTENNA ........................................................ 25 SPECIFICATIONS........................................................ 27
OPERATING ON BATTERY BATTERY INSTALLATION 1. Slide the battery lid. 2. Insert four AA batteries with correct polarity as shown in the compartment. 3. Close the lid of compartment.
Disconnect the AC adaptor plug with the unit while using batteries to supply power. Do not try to recharge no-rechargeable batteries. Do not mix old batteries with new ones. When the unit is not being used for a long period of time, remove batteries to avoid damage from battery leakage and corrosion. If battery leakage occurs, wipe the battery compartment with a soft cloth before inserting new batteries.
BATTERY REPLACEMENT 1. When the sound becomes weak and distorted, battery power indicates , replace batteries or charge the batteries immediately, otherwise the unit will shut off automatically. 2. All memories are permanently stored. However, when the power supply is broken off, the clock reverts to the default setting 0:00, it needs to be reset. 3. The clock time will not lose if you replace new batteries in 3 minutes.
1
POWER INDICATION
POWER SUPPLY OPERATING ON AC
Left side
Lower
Medium
More
Full
6V
LO
DX
AM ANT
Power indicator is a trapeze pattern, it is hidden when receiving programme. can check power level by press VOL .
1. Plug the adaptor into a 220V AC power outlet. 2. Insert the adaptor s small connector plug into the DC JACK 25 . If use AC adaptor to supply power, adaptor surface may a little heat. If the AC adaptor is connected, the unit automatically switches to the AC adaptor power, and installed batteries are no longer in use. Disconnect the AC adaptor with the outlet,if the AC adaptor is not being used. The backlight will keep on illuminated when using AC adaptor. Remove the batteries if you want to use AC adaptor for a long period of time. Only Supplied AC adaptor should be used for this unit.
2
If the power is exhausted, the unit will turn off automatically. When using rechargeable batteries, if to be recharged.
3
appears, batteries need
BATTERY CHARGE
BATTERY CHARGE
Install four AA rechargeable batteries with correct polarity. 2. Plug the adaptor into an 220V AC power outlet, connect the other side securely to DC Jack 25 . 3. In power off mode, hold down button VOL , in the meantime turn jog dial wheel TUNE to set charging time from 1~23 hours, then release button VOL , charging starts. Or press number button to input charging hours directly, then quickly press button VOL to confirm. 4. Indicator flashes during battery charging. 5. When preset charging time reaches, the unit stops charging automatically.
CAUTIONS If constantly displays, the unit is in charging process. Please select high-quality rechargeable batteries. When using new rechargeable batteries or those which have not been used for a long time, charge them fully, then use them until they have completely run down. Repeat this cycle two more times, then those batteries can be used normally. Do not leave fully charged batteries unused for a long time. Do not mix old batteries with new ones.
Notes: 1. Charging time should be set in power off mode, but you can turn on the unit and listen programme during charging process.
!
Do not try to charge dry batteries, avoid batteries leakage or explosion
2. There is no effect on battery charge if the unit is alarm on during charging. 3. Charging time can be calculated as: Charging hours = Battery Power (mAH) / 100mA ( charging current). 4. In power off mode, hold down VOL to check rest charging hours. 5. Battery charge will be terminated once the setting charging hours reaches. 6. Do not charge the batteries with fully power.
4
5
BEFORE OPERATING
SET THE CLOCK
Check Batteries/AC Adaptor
Display Time
Check if batteries are inserted with correct polarity. Check if AC adaptor is connected in correct way. Please use supplied AC adaptor only.
1. When the unit is off, current time indicates in the display. 2. When the unit is on, press to display current time 5 seconds. TIME
Set The Clock Check Hold Button If appears in the display, the unit is locked. All buttons except HOLD button become inoperative. Unlock it to resume operation(Details refer page 20).
The default time of this unit is 0:00, time has to be set in power off mode. 1. Hold down button for 2 seconds to set hour, hour number flashes for 30 seconds. 2. While hour number is flashing, turn the jog dial TUNE to set current hour. 3. After hour setting, press to set minute, minute number flashes. 4. Turn jog dial wheel to adjust minutes. 5. After setting, press to confirm. TIME
TIME
Check Local/DX Button Normally, set Local / DX button to DX position
23
.
TIME
M/F
STORE
VOL
AL1
AL2
CHG
DEGEN
SSB/268MEMORIES
2. /4. 1
2
PLL FM STEREO/SW.MW.LW DUAL CONVERSION DE1103 SYNTHESIZED WORLD RECEIVER
3
4 HOLD
SLEEP
RESET
5
6
7
TIME
SSB
DEL
ST/MO
8
9
0 BAND+
FM
SCAN
AM
1. /3./5. Please go to next step within 30 seconds, or the time setting will be invalid.
6
7
TURN ON OFF THE UNIT
VOLUME CONTROL & LOCAL/DX SWITCH
Volume Control
Power On / Off the unit to turn on the unit manually, press again to turn it off. Each time turn on the unit, it will receive the last station you ever heard. SLEEP
SLEEP
The volume is divided to 64 levels 0~63 , default level after reset the unit is level 40. When adjusting volume, corresponding level number appears in the display. Method 1
Turn on the unit, press VOL , VOL flashes for 3 seconds, turn jog dial wheel to adjust volume.
Alarm On / Off Two groups of alarm on /off time can be set in 24 hours. Station, volume can be set as well. The unit will turn on at preset time and will turn off after preset off time reaches. After setting, indicator AlARM 1 AlARM 2 constantly appears (Details refer to Page 12
VOL
MEM
STORE
CHG
AL1
AL2
DEGEN
SSB/268MEMORIES
+
VOL
Method 2
-
Press number button to input volume level directly, then press to confirm. For example: set volume to level 30 1
2
PLL FM STEREO/SW.MW.LW DUAL CONVERSION VOL DE1103 SYNTHESIZED WORLD RECEIVER
Sleep Timer
3
4
5
HOLD
SLEEP
Sleep time can be select from 1-99 minutes. After setting, indicator SLEEP constantly appears, when preset sleep time reaches, the unit will turn off automatically.(Details refer to Page 11).
+
RESET
6
7
TIME
SSB
DEL
ST/MO
3
8
9
0
BAND+
FM
SCAN
AM
0
VOL
Please go to next step within 3 seconds.
DX
Local /Dx Switch ALARM1
LO
ALARM2
M/F
STORE
VOL
AL1
AL2
CHG
In SW or MW band, set LOCAL/DX switch a proper position will increase reception.
23
to
DEGEN
SSB/268MEMORIES
SLEEP ALARM1 ALARM2
Generally, set the switch to DX position, unless there is a strong interference or when you are listening to local stations.
SLEEP
NOTE 1
2
PLL FM STEREO/SW.MW.LW DUAL CONVERSION DE1103 SYNTHESIZED WORLD RECEIVER
3
4 HOLD
SLEEP
RESET
5
6
7
TIME
SSB
DEL
ST/MO
8
9
0 BAND+
FM
8
SCAN
AM
If LOCAL/DX switch is set to LOCAL position, some strong signal stations may receive clearly, but most weak signal stations can not be received.
9
BAND
METER BAND CONVERSION
Band Conversion After turn on the unit, press or repeatedly to select your desired band, band indicator shows corresponding band in the display.
SET SLEEP TIME can set sleep time from 1~99 minutes with the unit on or off either.
BAND+
FM
75 90
MW
M
49M
60M
41M
Method 1 1. Press number button to input sleep time, the input number appears for 3 seconds. 2. Press to confirm within 3 seconds. 3. Indicator SLEEP constantly appears in the display, sleep function works, when the setting sleep time reaches, the unit will shut off automatically. SLEEP
13M
M/F
STORE
VOL
AL1
AL2
CHG
16M
19M
22M
25M
31M
3.
DEGEN
SSB/268MEMORIES
FM
MW
75 90
M 60M 49M 41M 31M 25M 22M 19M 16M 13M
108 1710 106 1600 4.0
12.4 14.4 15.9 18.0 21.9 5.4
6.4
7.4
9.9
3.9
5.3
6.3
7.3
9.8
3.8
5.2
6.2
7.2
9.7
100 1240 3.7
5.1
6.1
7.1
9.6
104
1510
98
1330 1150
94 92
970 880 790
76
1
610 520
2
PLL FM STEREO/SW.MW.LW DUAL CONVERSION DE1103 SYNTHESIZED WORLD RECEIVER RESET
CHG
DEGEN
SSB/268MEMORIES
SLEEP
12.0 14.0 15.5 17.6 21.5 3.6
5.0
6.0
7.0
9.5
3.5
4.9
5.9
6.9
9.4
3.4
4.8
5.8
6.8
9.3
3.3
4.7
5.7
6.7
9.2
3.2
4.6
5.6
6.6
9.1
11.9 13.9 15.4 17.5 21.4 11.8 13.8 15.3 17.4 21.3 11.7 13.7 15.2 17.3 21.2 11.6 13.6 15.1 17.2 21.1 11.5 13.5 15.0 17.1 21.0
3
4 HOLD
SLEEP
VOL
AL2
12.1 14.1 15.6 17.7 21.6
700 90
STORE
12.2 14.2 15.7 17.8 21.7
1060 96
M/F AL1
12.3 14.3 15.8 17.9 21.8
1420 102
5
6
7
TIME
SSB
DEL
ST/MO
8
9
0 BAND+
FM
SCAN
AM
1
2
1
2
PLL FM STEREO/SW.MW.LW DUAL CONVERSION DE1103 SYNTHESIZED WORLD RECEIVER
3
4 HOLD
SLEEP
RESET
5
6
7
TIME
SSB
DEL
ST/MO
8
9
0
1.
BAND+
FM
SCAN
AM
2. Method 2 1. Hold down , turn jog dial as well to select sleep time. Indicator SLEEP constantly appears in the display. SLEEP
Indicator SLEEP will constantly display after sleep time is set. You have to go to next step within 3 seconds, otherwise, the unit will exit from sleep time setting.
10
11
SET ALARM ON
SET ALARM ON
OFF
In power off mode, two groups of alarm on/off time can be set in 24 hours. Station volume can be set as well.
Set Alarm 1 1. In power off mode, hold down button M/F for 3 seconds, hour number flashes. 2. Turn jog dial TUNE to set hour, then press M/F to set minutes. 3. Turn TUNE to set minutes, then press M/F to go into station number setting. 4. Turn TUNE to select stored station number, then press M/F to go into volume setting. 5. Turn TUNE to adjust volume, then press M/F to set auto off time(from 5~99 minutes). 6. Turn TUNE to set auto off time. 7. Press M/F to confirm setting. AlARM 1 constantly appears, when preset on / off time reaches, the unit will on / of automatically.
M/F
STORE
VOL
AL2
CHG
DEGEN
SSB/268MEMORIES
ALARM1
M/F
STORE
VOL
AL1
AL2
CHG
DEGEN 2./3./4. /5./6.
SSB/268MEMORIES
1./7. 1
2
PLL FM STEREO/SW.MW.LW DUAL CONVERSION DE1103 SYNTHESIZED WORLD RECEIVER
3
4 HOLD
SLEEP
RESET
5
6
7
TIME
SSB
DEL
ST/MO
8
9
0 BAND+
FM
SCAN
Set Alarm 2 In power off mode, hold down button STORE for 3 seconds, hour number flashes. Other operations are same as Alarm 1 setting. 2. Finally, press STORE to confirm, ALARM2 constantly appears, when preset on / off time reaches, the unit will on / off automatically. If alarm 2 time is followed alarm 1, the setting of station and volume will supersede alarm 1. Alarm on/ off is valid when you are listening radio programme. If you do not change the alarm setting, it is still valid on next day.
Cancel Alarm On
Off
Cancel Alarm 1 In power off mode, press button M/F , the unit defaults last Alarm 1 setting. Press M/F again to cancel, indicator AlARM 1 disappears from the display.
ALARM 1
AL1
AM
Cancel Alarm In power off mode, press button STORE , the unit defaults last Alarm 2 setting. Press STORE again to cancel, indicator AlARM 2 disappears from the display.
Note Press
M/F
or
STORE
to skip one step or confirm last setting. 1
12
2
PLL FM STEREO/SW.MW.LW DUAL CONVERSION DE1103 SYNTHESIZED WORLD RECEIVER
3
4 HOLD
SLEEP
RESET
5
6
7
TIME
SSB
DEL
ST/MO
8
9
0 BAND+
FM
SCAN
OFF
AM
13
TUNING INTO A STATION
TUNING INTO A STATION You can use below 4 methods to find a desired station, when tuning into a AM station, appears to indicate signal strength. The more steps appear, the stronger signal it is.
JOG DIAL TUNING
DIRECT FREQUENCY ENTRY Direct frequency entry makes it extremely easy to tune into a station that you know its exact frequency. Frequency can be input without selecting band first. 1. Turn on the unit, press button 0~9 to enter frequency. 2. Press corresponding button to confirm: Press to confirm a FM band station, press to confirm a AM band station. BAND+
1. Turn on the unit, select desired band. 2. Press and turn the centre of the jog dial TUNE with one finger to quickly go to a desired station, watch the change of the frequency. 3. When near a station, you can use two fingers to turn the jog dial wheel slowly to find the exact frequency.
Sample 1 FM 89.80MHz 8
8
(FM band decimal point and last digitals of ignored.)
0
can be
Sample 2 AM 810KHz 8
DEGEN
9
1
0
BAND+
TUNE
+
Sample 3 AM 120KHz 1
2
0
BAND+
Sample 4 AM 10000KHz
SSB
DEL
ST/MO
WIDE
MUSIC NEWS
FINE
6
TIME
BAND+
FM
SCAN
AM
ON
5
LIGHT
4 HOLD
When use jog dial tuning, the frequency step for FM is 25K 7for 8 AM 9 is 0 1K. The highest turning speed is 80 step/circle.
OFF
3
NAR.
-
1
0
0
0
0
Next number has to be entered within 3 seconds after the fore number is entered. If an invalid frequency is entered, Err will appear in the display. The frequency step for direct entry is 1KHz for AM and 100KHz for FM.
LINE OUT
14
BAND+
15
TUNING INTO A STATION
TUNING INTO A STATION AUTO SCAN TUNING
MEMORY SCAN TUNING
1. Turn on the unit, change to your desired band. 2. Hold down or for more than 2 seconds, release when the frequency changes, the unit starts tuning into stations from current frequency. When a station is tuned in, scanning pauses for 3 seconds and the tuned station is heard. The scanning will continue if no further operation. 3. If a station is tuned in, you can use jog dial to fine tune. 4. Press any button to stop auto scan tuning.
Turn on the unit, press M/F to go into memory scan tuning mode, MEM appears in the display. 2.Turn the jog dial to tune into preset stations. 3. If you the preset number clearly, you can enter number button directly, and press M/F within 3 seconds to une into the station.
BAND+
M/F
STORE
VOL
AL1
AL2
CHG
DEGEN
SSB/268MEMORIES
ALARM1
M/F
STORE
VOL
AL1
AL2
CHG
DEGEN
SSB/268MEMORIES
M/F
STORE
VOL
AL1
AL2
CHG
DEGEN 2.
SSB/268MEMORIES
ALARM1
1. 3.
1
1
2
3
4 HOLD
SLEEP
RESET
5
6
7
TIME
SSB
DEL
ST/MO
8
9
SCAN
4
RESET
5
6
7
TIME
SSB
DEL
ST/MO
8
9
3.
0 BAND+
FM
SCAN
AM
0 BAND+
FM
3
HOLD
SLEEP
PLL FM STEREO/SW.MW.LW DUAL CONVERSION DE1103 SYNTHESIZED WORLD RECEIVER
2
PLL FM STEREO/SW.MW.LW DUAL CONVERSION DE1103 SYNTHESIZED WORLD RECEIVER
AM
2. Empty station number will be skipped automatically. If a empty station number is entered, indicator Err 1 2 3 4 5 6 7 8 will appear in the display.
1.
PLL FM STEREO/SW.MW.LW DUAL CONVERSION DE1103 SYNTHESIZED WORLD RECEIVER
HOLD
SLEEP
In auto scan tuning, the frequency step is 100K for FM 1K for MW and 5K for SW. The unit will scan within the frequency range of chosen band or meter band.
16
17
RESET
TIME
SSB
DEL
ST/MO
9
0 BAND+
FM
SCAN
AM
DELETE STATIONS
PRESET STATIONS There are total 255 stations can be preset in two area: convenience area or hidden area. All memories are permanently stored.
1. Turn on the unit hold down STORE . 2. At the same time, turn jog dial wheel, MEM flashes and frequency changes, find the station you want to delete. 3. Continue hold down STORE , and press button TIME , current station is empty, indicator MEM changes to VOL .
1. Turn on the unit, tune into a desired station by jog dial tuning, scan tuning or direct entry. 2. Hold down STORE , indicator MEM flashes. 3. Turn jog dial wheel to find a desired number. 4. Press STORE to store current frequency.
M/F
STORE
VOL
AL1
AL2
CHG
M/F
STORE
VOL
AL2
CHG
M/F
STORE
VOL
AL1
AL2
CHG
DEGEN
SSB/268MEMORIES
DEGEN
SSB/268MEMORIES
AL1
DELETE A SINGLE STATION
DEGEN
SSB/268MEMORIES
M/F
STORE
VOL
AL1
AL2
CHG
2.
1./3.
2./4.
1. 1
1
2
3
4
5
6
7
8
9
DE1103 SYNTHESIZED WORLD RECEIVER
HOLD
SLEEP
RESET
TIME
SSB
DEL
ST/MO
2
PLL FM STEREO/SW.MW.LW DUAL CONVERSION DE1103 SYNTHESIZED WORLD RECEIVER
0
3
4
5
HOLD
SLEEP
PLL FM STEREO/SW.MW.LW DUAL CONVERSION
DEGEN
SSB/268MEMORIES
RESET
6
7
TIME
SSB
DEL
ST/MO
8
9
0 BAND+
FM
SCAN
AM
BAND+
FM
SCAN
AM
3. Up to 100 stations can be preset in convenience area, from 0~99. 2 3 4 5 6 7 8 9 Total 156 stations can be preset in 1hidden area, from DE1103 0A~0F F0~FE. For short wave (SW) broadcasts, the frequence may different even for the same station at different time and period. Presetting different frequencies for the same station in the same area will let you tune into that station easily. If a preset number is already occupied, the new frequency with sam e preset number replaces the old one. PLL FM STEREO/SW.MW.LW DUAL CONVERSION SYNTHESIZED WORLD RECEIVER
HOLD
SLEEP
18
RESET
TIME
SSB
DEL
ST/MO
FM
SCAN
1 0
2
PLL FM STEREO/SW.MW.LW DUAL CONVERSION
4 HOLD
SYNTHESIZED WORLD RECEIVER
SLEEP
BAND+
AM
3
DELETE ALL PRESET STATIONS DE1103 RESET
5
6
7
TIME
SSB
DEL
ST/MO
8
9
0 BAND+
FM
SCAN
AM
Hold down and at the same time, then press RESET, all preset stations will be delete. HOLD
TIME
SLEEP
19
HOLD & BACKLIGHT
TONE SELECTION & NARROW / WIDE BAND
HOLD FUNCTION The hold function can be used to avoid any accidental operation when the unit is being carried or used. 1. Press button, indicator appears, hold function is activated, all buttons except HOLD button become inoperative. If the unit is on, press can turn off the unit. 2. Hold down button for 1 second to cancel hold function, disappears from the display.
3. Back light off Push the back light switch to OFF position, the backlight will off, push the switch to ON to resume back light function.
HOLD
TONE SELECTION
SLEEP
STEREO /MONO
HOLD
Stereo is suitable for strong signal music broadcast, mono is suitable for weak signal and voice program. Press button to convert between stereo and mono, the LCD will on when choosing stereo. SSB
HOLD M/F
STORE
VOL
AL1
AL2
CHG
DEGEN
SSB/268MEMORIES
NEWS/MUSIC Push the switch news or music.
1
2
PLL FM STEREO/SW.MW.LW DUAL CONVERSION DE1103 SYNTHESIZED WORLD RECEIVER
3
4 HOLD
SLEEP
RESET
5
6
7
TIME
SSB
DEL
ST/MO
8
9
14
to corresponding position when listen
0 BAND+
FM
SCAN
AM
NAR./WIDE 1./2.
BACK LIGHT FUNCTION There are 3 kinds of back light mode to select: normal always-on and back light off. 1. Normal press any button will start up the orange back light of the display and buttons. The back light will be off automatically if no further operation in 15 seconds. 2. Always-on If the power is supplied by AC adaptor, the back light will always on.
20
When listening AM band program, push NAR./WIDE switch to proper position will increase reception result. For this unit, the ist IF is 55.845MHz, 2nd IF is 450KHz. In AM band, push the NAR./WIDE switch 14 up to select WIDE , push the switch down to select Narrow Wide band has a better tone reception than narrow band, but it is noisier than narrow band reception.
21
EARPHONES & FOLDING STAND
RESET & LINE OUT
LISTENING WITH EARPHONES
FINE
When listening to stereo reception, normally use earphones, and the speaker will stop work automatically.
MUSIC LINE OUT
Notes On Earphones
LINE OUT You can output the radio broadcasting by connecting the unit to external appliance with a connecting cable inserted into LINE OUT jack. Volume adjustment and news/ music selection will not effect output.
MUSIC NEWS
WIDE
Pull out the folding stand in rear , extending the telescopic antenna straight upward.
OFF
ON
FINE
NAR.
Avoid using earphones at high volume, if you experience a ringing in your ears, reduce volume or stop using it. Set sleep time when listening radio before sleeping. Do not use earphones while driving or cycling, it can also be potentially dangerous to play your earphones at high volume while walking ,especially at pedestrian crossing.
USING FOLDING STAND
TUNE
LIGHT
EARPOHNE JACK
NEWS
Speaker has MONO effect only.
P9
If the unit operates erratically, press RESET to resume normal operation. Reset function will not erase all of the memories except the clock time.
SSB
RESET
LINE OUT
Line out jack
Connect external appliance
22
23
USING ANTENNA
RECEIVING SSB/CW 1. Turn on the unit, SSB signal can be received att the frequency range of 100~29999KHz. 2. Tune into a AM station with medium strong signal. 3. Press SSB button, turn jog dial to tune into a SSB frequency. 4. When find a SSB signal, tune the SSB FINE Knob to have the best reception.
FM Reception Telescopic antenna functions as FM antenna, keep it extended and change its length and direction to find the position which gives the best reception. FM
M/F
STORE
VOL
AL1
AL2
CHG
DEGEN
SSB/268MEMORIES
MW Reception
2.
4. 1
2
PLL FM STEREO/SW.MW.LW DUAL CONVERSION DE1103 SYNTHESIZED WORLD RECEIVER
3
4 HOLD
SLEEP
RESET
1.
5
6
7
TIME
SSB
DEL
ST/MO
8
9
0 BAND+
FM
SCAN
AM
3.
Ferrite antenna inside the unit functions as MW antenna, it is strongly effected by the reception direction. Therefore, when listening to MW broadcast, rotate the unit to find the position which gives the best reception.
MW
24
25
USING ANTENNA
SPECIFICATIONS Frequency Range
SW Reception Telescopic antenna functions as SW antenna. Extending the antenna straight upward to get the best reception. Normally, set the LOCAL/DX switch 23 to DX position when listening SW programme.
DEGEN
1
2
3
4
5
6
7
8
9
0
(SW)
External Antenna If FM or SW reception is too weak, use supplied extra- long external antenna to improve reception.
Keep the external antenna straight, insert one side to the ext. Jack 22 of the unit, another side outdoors.
Outdoors
FM
76.00 - 108.00 MHz
AM
100 - 29999 KHz
90m 75m 60m 49m 41m 31m
3.160 3.860 4.710 5.910 7.010 9.170
-
Do not use external antenna during a thunder storm day.
MHz MHz MHz MHz MHz MHz
25m 22m 19m 16m 13m 11m
. AM 2nd IF Wide band
6KHz
Narrow band
4KHz
5. Power Supply: Battery: 4 AA batteries External power: DC in 8v 300mA Recharging time: 1~23 hours 6. Speaker: 7. External Earphones:
D77mm D3.5mm Approx. Approx.
If the signal is too strong when using external antenna, set the Local/DX switch to Local position.
26
11.510 - 12.155 13.510 - 13.905 15.010 - 15.705 17.260 - 18.105 21.410 - 21.955 25.610 - 26.100
2. Noise Limit Sensitivity FM 10 V MW 1mv/m SW 20 V
8. Dimensions: 9. Weight:
!
3.455 4.055 5.105 6.255 7.405 9.995
27
165*105*29mm 300g (excl.batteries)
MHz MHz MHz MHz MHz MHz
Related Documents 171j1w
Radio Degen De1103 6l4l39
November 2019 60
Degen De1103 Modifications 4o5g1q
October 2019 46
Degen De1121 2g4a5b
November 2019 29
Chibo C300 Vs Degen De 1102 Radio Review 571d4u
December 2019 39
Degen De-105 262r2v
November 2019 63
Radio 5h363d
December 2019 72More Documents from "John G." 4v2k14
Radio Degen De1103 6l4l39
November 2019 60
Garmin Forerunner 205 Manual 3h6u1m
November 2019 74
2c82t
November 2019 209
Taller Resuelto Mov Ondulatorio (2) 6b3m4
May 2020 15
Silvercrest Espresso Machine Sem 1100 A2 66926 1ls3c
March 2023 0