Power Supply Tester Manual 3i1t4w
This document was ed by and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this report form. Report r6l17
Overview 4q3b3c
& View Power Supply Tester Manual as PDF for free.
More details 26j3b
- Words: 267
- Pages: 2
DIGITAL POWER SUPPLY TESTER 101530 MANUAL
www.manhattan-products.com
Description The Manhattan™ Digital Power Supply Tester is a robust voltage tester for PC-power supply. ATX Power supplies can be tested. The device shows on one display all supply voltage with one decimal place. Errors will be announced by a warm signal. Specification: • Voltage source: 20/24 pol. (ATX connector) • Voltage test: +12V, -12V, +5V, +3,3V 5V Stand By (SB) 12V Power Good (PG) • Connectors: Floppy, HDD, CDROM, SATA, 4 pin (P4), 8 pin (Dual-U), 6 pin (PCIExpress) Package content:* • Manhattan™ Digital Power Supply Tester • manual *Make sure that the product package contains all items before operation. If any item is missing or damaged, then please your dealer immediately.
NOTICE: Do not connect the powers supply to your PC while testing! Plug-in 20/24 pin connector to the Power Tester. Switch on your power supply. Check the voltage in the display. Connect P4 connector to the P4 female connector of the Power Tester. Check the voltage in the display. Plug-in the HDD cable. The LED’s +12V and +5V should light up. 7. Remove the HDD cable. 8. Plug-in a Floppy cable. 9. The LED’s +12V and +5V should light up. 10. Remove the Floppy cable. 11. Plug-in a SATA cable. 12. The LED’s +12V, +3,3V and +5V sholud light up. 13. Remove the SATA cable. 14. Plug-in 6 pin and 8 pin connector one after the Rother. 15. Check the voltage in the display. 16. If the LED’s are not lightning, than the power suppply is damaged. 1. 2. 3. 4. 5. 6.
www.manhattan-products.com
www.manhattan-products.com
Description The Manhattan™ Digital Power Supply Tester is a robust voltage tester for PC-power supply. ATX Power supplies can be tested. The device shows on one display all supply voltage with one decimal place. Errors will be announced by a warm signal. Specification: • Voltage source: 20/24 pol. (ATX connector) • Voltage test: +12V, -12V, +5V, +3,3V 5V Stand By (SB) 12V Power Good (PG) • Connectors: Floppy, HDD, CDROM, SATA, 4 pin (P4), 8 pin (Dual-U), 6 pin (PCIExpress) Package content:* • Manhattan™ Digital Power Supply Tester • manual *Make sure that the product package contains all items before operation. If any item is missing or damaged, then please your dealer immediately.
NOTICE: Do not connect the powers supply to your PC while testing! Plug-in 20/24 pin connector to the Power Tester. Switch on your power supply. Check the voltage in the display. Connect P4 connector to the P4 female connector of the Power Tester. Check the voltage in the display. Plug-in the HDD cable. The LED’s +12V and +5V should light up. 7. Remove the HDD cable. 8. Plug-in a Floppy cable. 9. The LED’s +12V and +5V should light up. 10. Remove the Floppy cable. 11. Plug-in a SATA cable. 12. The LED’s +12V, +3,3V and +5V sholud light up. 13. Remove the SATA cable. 14. Plug-in 6 pin and 8 pin connector one after the Rother. 15. Check the voltage in the display. 16. If the LED’s are not lightning, than the power suppply is damaged. 1. 2. 3. 4. 5. 6.
www.manhattan-products.com
Related Documents 171j1w
Power Supply Tester Manual 3i1t4w
April 2022 0
Rexus Power Supply Tester Manual 4e6u3v
December 2019 19
Tyco Power Supply Manual 5a4067
November 2022 0
Booster Power Supply Manual 3o2t50
December 2019 44
Kepco Power Supply Manual 4ka2
July 2022 0