Msds Ept060 Epoxy Thinner 6a2r60

MATERIAL SAFETY DATA SHEET 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Product name Code Chemical description

: EPOXY THINNER : EPT-060 MK : This product is epoxy thinner

Supplier

: PT. GYUNG DO INDONESIA Ngoro Industri Persada Blok H – 03 A, Ngoro Mojokerto 61385 - Indonesia

Emergency number

: Tel. 0321 – 6819444 - 6819445 Fax. 0321 – 6819446

2. COMPOSITION / INFORMATION ON INGREDIENTS Composition

: *Solvents

3. PHYSICAL AND CHEMICAL PROPERTIES Physical state % Solid Density (sp.gr) (30℃) PH Flash point VOC *)

: Clear : .. : 0,8~0,9 g/cm3 : not applicable : About 27℃ : ..

Derived from the Solvent

4. HAZARDS IDENTIFICATION Harmfull. The vapours are irritating to the eyes, the skin and the respiratory tract. Frequent or continuous skin contract causes irritation and may lead to dermatitis. The product is flammable.

5. HEALTH HAZARD INFORMATION Eye Inhalation Ingestion Skin

: May cause redness,irritaion : May cause dizziness,headache,nausea : May cause nausea,irritation or vomiting : May cause rash,cracking,dryness or defacing of skin

6. FIRST AID MEASURES General Inhalation Skin Eye Ingestion

: In all cases of doubt or when symptoms persists seek medical advice immediately. : Remove immediately to fresh air, avoid exertion. : Wash immediately with plenty of water and soap. : Rinse for at least 15 minutes with plenty of water. : Give plenty of water to drink, do not induce vomiting.

7. FIRE FIGHTING MEASURES Extinguishing media Special risk Protective equipment

: Foam,CO2,Dry chemicals : Nitrous gasses are produced in case of fire. : Apply self contained breathing apparatus.

8. ACCIDENTAL RELEASE MEASURES Personal precautions Environmental precautions Cleaning procedures

: Avoid breathing of vapor. : Do not allow material to enter sewers, the soil and surface water : Absorb with i.e sand, sweep up and put into a container for disposal

9. HANDLING AND STORAGE Apply proper ventilation, possibly combined with a local exhaust. Do not eat,smoke or drink during use. Use only explosion proof equipment. Avoid with strong oxidazers, also avoid with certain plastics like PVC and natural rubber,this material will dissolve. Keep away from sources of ignition – no smoking. Store at a well-ventilated place. Keep original, well-closed packaging. Comply with governmental regulations. Keep at cool, dark place bellow 15℃ special for hardner.

10. EXPOSURE CONTROLS / PERSONAL PROTECTIONS Wear safety goggles againts splicing, at least working clothes and proper gloves. (neoprene or nitril rubber) Work as much as possible in closed systems. If not feasible install proper ventilation, possibly combined with local exhaust. Try to reach the lowest possible exposure. Respect the threshold limit values of dangerous components. Keep away from food, beverages and tobacco. Wash your hands before break or living work. Put the working clothes away separately. Launder contaminated clothing nefore reuse.

11. STABILITY AND REACTIVITY Conditions to avoid Materials to avoid

: Avoid direct sunlight,heat sources : Avoid strong acid,alkali,peroxides

12. TOXICOLOGICAL INFORMATION No experimental data of the product available. Respiratory exposure to the vapors may lead to coughing, dizziness, sickness, drwsiness and vomiting. Long term exposure may lead to effects of the central nervous system. Frequent or continuous skin may leas to irritation and dermatitis.

13. ECOLOGICAL INFORMATION No experimental data of the product available.

14. DISPOSAL CONSIDERATIONS Waste disposal in accordance with the regulations. Controlled incineration is recommended. Contaminated container may be reused after cleaning.

15. TRANSPORT INFORMATION Sipping classification : Flammable liquid, Any transportation pratice must be in compliance with local,states or federal laws and regulations. local or state transportation agency for specific rules.

16. OTHER INFORMATION This information is based on our present knowledge. This shall not constitute aguarantee for any specific product features and shall not establish a legally valid contractual relationship.