Labour Saving Devices
Labour Saving Devices Labor
saving devices are things that reduce the amount of effort required by people to accomplish a task.
Also called deskilling devices. In Mr.Pawan Godiawala’swords
”A Cgrade operator can do sewing operations like a A- Grade (highly skilled) operator with the
USES To improve productivity Improve or maintain quality standards Reduce training time of operator Reduce fatigue of operator
Needle Coolers
Shoots a blast of frigid air onto needles at temperatures as low as 10°F below zero.
Produces these low temperatures using inplant air supply.
Ends downtime caused by broken thread, dye-clogged needle eyes and skipping.
Increases uninterrupted sewing production time, when used along with siliconetreated thread for special high-speed applications.
Engineered for use with all models of machines.
Thread & Ribbon Sensors
Used on all Automatic Machines.
Normally Thread guides are made of ceramic material.
A thread break detector for a thread in a sewing machine comprising a sensor device having a signal path cross section for scanning .
Tension guide
Used for stretching elastics and strip rubber in elasticized items or for retarding tapes and laces in order to create shirring or fullness. generally used in conjunction with some form of folding attachment (foot or guide). Double spring construction for equalized tension. Table type fastens to either top, front or underside of the machine table.
Back Tackers
Overlock chain is cut and held by back tacker at the end of each seam. When operator starts the next seam the chain is sewn into the stitch eliminating trimming and the need for tacking. Presser foot must be grooved to guide chain.
Backlatchers Ply
sensors
Magnet Guides Used for distance masurements Place this on the bed of your non
computerized sewing machine to help align your fabric for perfect seams Magnetic Seam Guide. Guide attaches to the metal throat plate on your sewing machine to insure uniform seam width. The guide adjusts to any width and removes easily. NOTE: Not suggested for use
Under Bed Thread Runners Removes
thread visible on the wrong side of the fabric at the end of the operation.
Pressure Foots Terret Pressure Foot Teflon Pressure Foot Compensating Pressure
Foot
Profile Sticher
Needle Coolers Thread & Ribbon Sensors Label Dispensers
Binding Reels Top Universal Binding Reel Tape Binding Reel Universal Tape Binding Reel Universal Binding Stand
Tension Guides Top Elastic Tape Tension Guide
Discs
Turners Top Belt Tie Turner Collar Turner
Spring Collars Top Spring Collar For Tape Racks
Cone Bearings Top Cone Bearings
Rod Clamps Top Deluxe Rod Clamps
Rods Top Steel Rods (Black Oxide)
Clamps Top Heavy-Duty Clamps
Bases Top Stand Bases
Rollers
Couplings Top Lovejoy Couplings
Collars Top Shaft Collars
Unwinders Top Universal Motorized Tension-less Unwinders
Pullers Top Standard Puller Universal Variable Speed Cloth Puller Zero Max Variable Speed Controls
Tape Feeders Top Upper Tape Feeder
Cloth Pullers Top Single Needle Synchronized Cloth Puller Double Needle Synchronized Cloth Puller
Cutters Top Universal Air Operated Impact Cutters Universal Hand Cutter
Thread Cutter
Fits on most sewing machines having a slide plate Its own spring tension will hold it in place. At completion of sewing, operator draws thread under lip of cutter and onto "V" slot. Thread is cut and secured under lip by spring tension, thus preventing needle from becoming unthreaded. Easily sharpened. One or two strokes of a stone gives it a "like new" cutting edge.
Grip Snip Thread Cutter
No matter what the operator is sewing (dresses, collars, pockets, shirts, shorts, etc.), this device will catch and cut the thread and hold it for the next operation. Simply attach the presser foot bar with same screw that holds presser foot. It will not interfere with normal sewing; but can be used when needed.
Spring holds thread, preventing the needle from becoming unthreaded. Sharp blade mounted above spring cuts thread instantly.
Eliminates needle rethreading, picking up scissors to cut thread and bunching of thread at next operation
Binders
Hemmers Used
for hemming straight runs
Attachments and Folders Generally used in situations where fabric must be folded prior to sewing Can be used for folds ranging from simple to complex
Generally used in situations where fabric must be folded prior to sewing Can be used for folds ranging from simple to complex Mostly separate devices attached to machine Enable Great increase in productivity High standard of control over quality of finish obtained
Attachments used in Formal Shirt1.Hem Collar Band
2.Set Sleeve - Single Needle
3. Shoulder / Yoke
4.Side seam / Close Sleeve
5.Double Needle Imitation Sleeve Setting
6.Bellows Pocket
7.Hem Cuffs
8.Sleeve Placket / Facing
9.Hem Shirt Tail
Attachments used in Formal Shirt No.
Description
Equipment
Attachment
Folder
1
Hem Collar Band 314-A-4, 284
FOLDER
2
Set Sleeve - Single Needle
316D 1st Operation, 316E 2nd Operation
FOLDER
3
Shoulder / Yoke
284, 316, 656A, 656B, 656C, 656D, 656E, 657A, 657B
FOLDER
4
Side seam / Close Sleeve
746 thru 753
FOLDER
5
Double Needle Imitation Sleeve Setting
316F
FOLDER
6
Bellows Pocket 519 thru 519-5
FOLDER
7
Hem Cuffs 266, 267, 268-B-1, 275, 284
FOLDER
8
Sleeve Placket / Facing
252, 254,420, 420-8, 420-C-8
FOLDER
9
Hem Shirt Tail 309, 309-1
FOLDER
10
Front Placket 321, 320, 402, 402-3, 402-B, 402L, 403-2, 421, 410, 410-1, 410-2
FOLDER
10L, 411, 411L, 411-2, 411-4L, 412, 412A, 412L, 412-3
FOLDER
11
Button Stay 302-1, 300C1, 300D, 303, 305D, 305D-1, 305D-2, 305DL, 305DR, 371,
FOLDER
12 Hem Sleeve / Pocket
FOLDE R
13 Set Sleeve
FOLDE R
300C, 300D, 300C1, 422, 422A, 320, 321
269-2
1 . Hem Collar Band Single
Upturn Hemmer
For hemming shirt yokes, collar bands, etc.
Can be used with SNLS Seam Type: Seam Number:EFb
Set sleeve Single needle sleeving attachment First operation of attaching sleeve to shirt on plain sewer.
Available in left & right-hand
Set sleeve
Single needle sleeving attachment Second operation in top stitching sleeve. Available in left & righthand. Compensating presser foot available for all machines. Advise top-stitching margin desired.
Shoulder Yoke
Special felling attachment For hemming shirt yokes, Top Stitch er For yoking and other top stitch ing operations. Available for single or double needle, lockstitch or chainstitch machines.
Tu rn s d o w n th e to p p ly a n d jo in s it to a d d itio n a lp ly
The bottom ply is then turned back to form the yoke
Jo in S h o u ld e r Y o k e
Double Yoking Attachment Designed to attach double front or back yokes to shirts or blouse Compensating presser foot available for all machines.
Left
Right
Shoulder Yoke
Top Stitch er Left For yoking and other top stitch ing operations. Folders are adjustable. Available for single or double needle, lockstitch or chainstitch machines.
657-A
Raw Edge Lap Seam Guide Available for all multineedle machines. Specify needle gauge and machine class.
Side seam / Close Sleeve 753-B 753-A
Double Needle Imitation Sleeve Setting
Double needle imitation sleeving attachment for 2-needle machine For all two-needle lockstitch machines. Simulates single sleeving in one operation. Special presser feet required.
Bellows Pocket Folder Home|Previous Next
Folder Home|Previous Next
519-5 & 519-6 Two-tone Tucking Attachment Special presser feet 519 available. Imitation Lap Seam Attachment Avalilable for all multi needle machines. Produces an imitation lap seam for special effects. Contrasting tape may be added to any model. Available for single or double needle, lockstitch Poroduces a bellows or chainstitch machines. effect on pockets, yokes and more.
Left or right hand.
519
519-5 Upturn
Hem Cuffs
Downturn adjustable cuff hemmer Completely adjustable. Cuffs and linings of different widths can be run. Shorter guide length allows easy loading of small cuffs. Lining is roll fed from bottom.
Sleeve Placket/Facing
Sleeve Facing Folder Strip Load Available for all single needle machines. 5-row feed and plate recommended for finishes over 1/2". Strip-loading to eliminate shading paroblems. Edge guide foot available for all machines. Special presser feet available.
420-A
Hem Shirt Tail
Shirt tail spring hemmer Contour shirt tails Furnished complete with foot feed and needle plate for plain sewers. Designed for fish tail shirts and blouses. Spring allows seam to freely. For sharp hem curves,
Shirt
tail spring hemmer Straight bottoms Furnished complete with foot feed and needle plate for plain sewers. Designed for straight shirt or blouse tail. Spring allows seam to freely.
Front Placket
3-way Hemmer Full Turn-back Hemmer has full turnback for lighter materials to eliminate shadow of turn-back on operations such as drapes. Edge guide presser foot available for all plain sewers. Available for all blind-
Downturn
Hemmer With Adjustable Guide Operator may hem and atttach lining or buckram in oner operation. Compensating presser foot available for all machines. Available for all single or double needle
Placket
Folder Strip-Load Standard stripload placket folder. Available for all single and double needle
French Facing Folder For French button facing can be used with all single or double needle machines
Banding Folder Strips are loaded individually to eliminate shading problems. May be used with continuous banding.
Special presser foot is required available.
Button Stay Folder For shirt fronts. Available for all double needle machines. Special presser feet available. 778 or 778-1 under table reel recommended for this
Button Stay Top
Center Folder with Lining Top center pleat with lining. Swing-up mounting. Availale for all multi-needle machines. Lining guide is reversable. Left or right.
Imitation Center Folder Special design for imitation shirt front. Left & right hand models available. Available for all multi-needle machines.
Left
Hem Sleeve / Pocket Upturn
clean finish hemmer Hemmer has a tongue to ensure the hem starts and finishes the exact width desired. 5-row feed dog, needle plates required.
Presser foot is required for all plain sewers.
Imitation
Cuff Folder Downturn used for all single needle chainstitch or lockstitch machines. Special presser feet required.
3-way Hemmer Full Turn-back Hemmer has full turnback for lighter materials to eliminate shadow of turn-back on operations such as drapes. Edge guide presser foot required for all plain sewers. Can even used for all blind-stitch machines.
Downturn Hemmer With Adjustable Guide Operator may hem and attach lining or buckram in one operation. Compensating presser foot required for all machines. Available for all
Set Sleeve
Cuff setting attachment For setting and top stitching a cuff to a shirt sleeve after the cuff is made and turned. Insures stitching margin, consistant quality and production. Edge guide presser foot availale for all plain sewers.
Pre se n te d b y : Sugandha Rathore