Interim Catalogue 3z5m5o

new

P R O D U C T S | 2 0 1 2 ers’ hardware handbook

uni qu e • IN N OVATION

CONTENTS Contents

Page

Finish Description Antique Brass

1. 1.1 1.2 1.3 1.4 1.5

DECORATIVE HARDWARE Aluminium & Stainless Steel Handles & Knobs Contemporary Handles & Knobs Wooden Handles Antique Handles & Knobs Aluminium Finger Grips

02 - 05 06 - 15 16 17 18 - 21

2. 2.1 2.2 2.3 2.4 2.5 2.6

TABLE LEGS Kitchen Table Legs Office Table Legs Aluminium Legs Universal Consols & Couch Feet Cabinet & Couch Feet Aluminium Frame Components

22 23 24 25 - 27 28 - 29 30 - 31

3. 3.1 3.2

DOORS Aluminium Sliding Door System Aluminium Glass Door Profiles P4, P6 and P7

4. 4.1

SIBU Decorative Structure Sheets

5. 5.1 5.2 5.3 5.4 5.5 5.6

CABINET ORGANISERS & ACCESSORIES Cabinet Organisers Wire Organisers Drawer Organisers - Adjustable Cutlery Trays Lighting Solutions Shelf s Floating Cabinet Brackets

36 - 37 38 - 42 43 44 - 47 48 - 49 50 - 51

6. 6.1 6.2 6.3 6.4 6.5 6.6 6.7 6.8 6.9 6.10 6.11

HARDWARE Wire Management Wire Management & Vents Knock Down Fittings Brackets & Connectors Hinges Office Hardware Castors Nails, Rumber Nuts, Screws & Bolts Catches, Escutcheons & Locks Door Lifts Full Extension Drawer Slides & Damping Systems

52 53 54 - 55 56 57 58 - 59 60 61 62 63 64

7. 7.1

HARN Drawer Systems

8. 8.1 8.2 8.3 8.4 8.5 8.6 8.7 8.8 8.9 8.10

SALICE General Instructions Series 800 Series 200 Series 700 - Silentia Series Push Series 200 for Glass Doors Lift Systems - Single Flap Doors Lift Systems - Folding Doors Lift Systems - Parallel Opening System Accessories

7. 7.1

MAPS Raiël Maps

Anodised Gold Antique Iron Black Antique Nickel Antique Pewter Antique Silver Matt Black Black Black Nickel Brushed Satin Nickel Bright Silver Brushed Nickel Brass

32 - 33 34

Cast Iron Chrome

35

Dull Bronze Dull Satin Nickel Gun Blue Matt Chrome Matt Nickel Matt Silver Natural Anodised Oak Natural/Light Oak Dark/Black Oxidised Tin Polished Brass Pearl Silver Red Rust Satin Chrome Matt Stainless Steel Silver Powder Cote Silver Vein White

65 66 - 68 69 70 71 72 - 74 75 76 - 79 80 - 83 84 - 86 87

Symbol

Description Centre to Centre Measurement Length Width Height

Ø

Diameter Knob Height Square Knob - all sides are equal Square Knob’s Height

88

Unit Width To Edge

We reserve the right to change any technical specifications without prior notice. The photos may differ from the actual product.

1

DECORATIVE HARDWARE 1.1 Aluminium & Stainless Steel Handles & Knobs Item No: 460

Slope Handle with Cut-Out 160 184

8

8 34 new new

RAH751

new

RAH753

RAH752

Item No: 465

Bullet D-Handle 160 190 12 32

new new

12

RAH755 RAH754

Item No: 457

20 new new

Item No: 1520

10

20

32 42 11 20

128 138 11 20

RAH765 RAH764

RAH767 RAH766

Euro Grip 95 x 40 64 95 10 40

40

35

L-Grip

new

RAH844

new Item No: 1598

Darling Grip 95 x 35 64 95

18

15

35 RAH913 RAH912 RAH914

02

DECORATIVE HARDWARE

1

1.1 Aluminium & Stainless Steel Handles & Knobs Item No: 06

Alex T06 Handle 128 149 12 30

new

RAH673

new new

RAH745 RAH794

Item No: 50

Ø new

Ø new new new new

10

Oval Arch Handle 96 115 15 28

128 153 15 28

RAH735 RAH734 RAH670

RAH736

160 190 15 28

192 229 15 28 RAH740 RAH739 RAH672

RAH643 RAH915 RAH916

W

Ø

new new

15

12mm Steel Bar Handle 96 156 12 30

192 252 12 30 300 24

284 344 12 30 400 28

RIH1015 RIH1011 RIH1013 RIH1014 RIH1010 RIH1012

Item No: 27 Ø

new new

192 236 10 28

MB

Item No: 592

new new

96 116 10 28

RAH731 RAH733

Item No: 46

new new

Arch Handle

KR Bar Knobs 12 18

14 20

20 25

24 30

RAK122

RAK125 RAK123 RAK124 RAK281 RAK284 RAK283 RAK285

03

1

DECORATIVE HARDWARE 1.1 Aluminium & Stainless Steel Handles & Knobs Item No: 495

Square D-Handle with Wide Pillar 128 158

192 222

320 350

448 478

9.5 32

9.5 32

9.5 32

9.5 32

RAH768 RAH769 RAH770 RAH771

new

Item No: 459

Square D-Handle 96 108 12 30

new

160 172 12 30

320 332 12 30

448 460 12 30

RAH773 RAH776 RAH778 RAH779 RAH772 RAH775 RAH774 RAH777

new new

Item No: 9

new

AlexT15 Grip 32

128

234

42 14 21

140 14 21

294 14 21

RAH746 RAH747 RAH748

14

Item No: 578

Roman Bar Handle 128 150 39

192 214 39

RIH273 RIH274

256 278 39

384 406 39

480 502 39

RIH275

RIH276 RIH277

612 634 39

762 784 39

RIH985

RIH986 new

04

DECORATIVE HARDWARE

1

1.1 Aluminium & Stainless Steel Handles & Knobs Item No: 1850

Tower Grip Handle

4

224 248 4 32 RAH934

new new

RAH935 7.8

Item No: 448

new new

128 152 25

288 343 25

448 530 25

30

30

30

RAH783 RAH781 RAH785 RAH786 RAH782 RAH780 RAH784

new new

Item No: 454

new new new new new

UFO Arch Handle

MB W

Item No: 54

Ø new

Half Round Arch 192 216 19 33

348 394 19 33

392 444 19 33

478 544 19 33

RAH756 RAH757 RAH758

RAH759 RAH760 RAH761

19

RAH917 RAH918

14mm Arch Handle 195 244 14 35

234 294 14 35

314 394 14 35

519 659 14 35

Ø14

RAH741 RAH742 RAH743 RAH744

Item No: 455

Half Round Handle with Oval Pillars 96 156 19 32

new new

25

19

RAH763 RAH762

05

1

DECORATIVE HARDWARE 1.2 Contemporary Handles and Knobs new Bullet D Grip Left or Right

Bullet D Centre Grip

Item No: 1600

Item No: 1601 224 252 12

352 380 12

352 380 12

32

32

32

RAH921

RAH922

RAH923

d

RWH694

RWH696

RWH698

d

RWH695

RWH697

RWH699

woo woo

new Round Slot Grip Left or Right

Round Slot Centre Grip

Item No: 1602

d woo d

woo

new Item No: 1583

Item No: 1603 224 252 12

352 380 12

352 380 12

32

32

32

RAH924

RAH925

RAH926

RWH700 RWH701

RWH702 RWH703

RWH704 RWH705

Postbox Handle 96 113 16

128 145 16

RIH1416 RIH1417

RIH1418 RIH1419 113/145

14

33

96/128

42

102/134

06

DECORATIVE HARDWARE

1

1.2 Contemporary Handles and Knobs new Item No: 1608

Ø

Oslo Knob 45 32 RAK290 RAK291

d

RWK404

d

RWK405

woo woo

Item No: 37

AK12 Knob (Ø16mm)

Item No: 40

AK16 Knob (Ø24mm)

Ø

Finish

RS Code

Ø

Finish

RAK128

new 24

new 16

24

Item No: 39

AK15 Knob (Ø30mm)

Ø

Finish

new 30

25

Item No: 453

RS Code

Item No: 21

AK11 Knob (Ø30mm)

Ø

Finish 30 30

Item No: 463

32 42 33 20 new new

RAH749 RAH750

25mm Square Knob & Square Pillar

31

RS Code RAH792

Item No: 452

Round Knob & Round Pillar (Ø24mm)

Ø

Finish

RS Code RAK126 RAK288

Angle Grip

RAK135

Finish

RAK129 new 25x25

new 30 new 30

20

RS Code

new 25

25

RS Code RAH791

20 new Item No: 1569

Ø 27

Ceramic Knob RS Code

32

RIH1414

07

1

DECORATIVE HARDWARE 1.2 Contemporary Handles and Knobs new Item No: 1609

Ø

Capped Tappered Knob Ø22mm 22 23 RAK292 RAK293

d

RWK406

woo

d

RWK407

new Item No: 1621

Capped Ridge Knob Ø26mm

woo

Ø

26 28 RAK294 RAK295 RWK408 RWK409

d

woo

d

woo

* Free assorted caps supplied with each knob. Wood Caps

Black & White

Metal Caps

Maple, Oak, Cherry, Mahogany, Beech, Black, White, Tan, Enoco, Eggshell

new Item No: 1623

Tulip Ridge Knob Ø64mm 32

Ø

RAK296 RAK297 RWK410

d

woo

d

woo

RWK411

new Item No: 1624

Heart Knob

Ø

46

50

08

30

64 32

Red White

50 30 RSK488 RSK489

DECORATIVE HARDWARE

1

1.2 Contemporary Handles and Knobs new Item No: 1605

Alex TO3 12mm 128 152 12 32 RAH930 RAH929

new Item No: 1606

Alex TO3 50mm 128 152 50 32 RAH931

new Item No: 1607

Alex TO1 12mm 128 152 12 32 RAH933 RAH932

new Item No: 1604

Mini Grips Flag 14 12 32

16 24 12 32

RAH927

RAH928

09

1

DECORATIVE HARDWARE 1.2 Contemporary Handles and Knobs new Item No: 1564

new Item No: 1565

new Item No: 1566

Circular Handle 160 170

320 330

25

25

RIH1406

RIH1407

Square Handle 160 170

256 266

24

24

RIH1408

RIH1409

Slotted Handle 192 205 28 RIH1410

new Item No: 1567

Leather Coffee

10

320 335 34 RIH1411

Leather Pull’s 128

Knob

155 25

65 25

RIH1413

RIH1412

DECORATIVE HARDWARE

1

1.2 Contemporary Handles and Knobs new Item No: 1102

Cubic Handle 160 265 40 30 RIH1055

new Item No: 1101

Cubic Knob 32

32

40

60

40

60

30

30

RIH1053 RIH1054

new Item No: 1104

Concave Handle 160 200 40 30 RIH1052

new Item No: 1103

Concave Pull 32

32

40

60

40

60

30

30

RIH1050 RIH1051

new Item No: 1105

Dimple Pull 32

32

40

60

40

60

25

30

RIH1056 RIH1057

11

1

DECORATIVE HARDWARE 1.2 Contemporary Handles and Knobs

new IItem No: 1563

Flower Handle Left & Right 96 110 25

new Item No: 1568

RIH1400

LEFT

RIH1401

RIGHT

RIH1402 RIH1403

LEFT RIGHT

Crystal Handle & Knob 128 140 25 RIH1405

new Item No: 1128

Ø

Crystal Prism Glass & Chrome Knob 30

new Item No: 1628

Ø

new Item No: 1543

Ø

RIK146 RIK150

Round Glass Knob 44 x 34mm 34

Crystal

new Item No: 1543

Ø

44 Crystal

12

RIK148

RIH1404

Crystal Piramyd Knob 35mm x 40mm 40 35

40 Crystal Black

Knob 16 25

RIK149

Crystal Knob Flat 35mm x 40mm 40 35

Crystal

RIK147

DECORATIVE HARDWARE

1

1.2 Contemporary Handles and Knobs

new Item No: 1760

new Item No: 1759

new Item No: 1761

Titania Crystal & Knob 128 160

Knob 50

30

22

RIH1507

RIH1508

Calypso Crystal Knob 30 28

20 18

RIH1506

RIH1505

Electra Crystal Knob 20 50

new Item No: 1771

Ø

Tappered Crystal Knob 22 30

26

RIK280

RIH1509

new Item No: 1772

Ø

new Item No: 1773

AK21 Crystal Knob 18

new Item No: 1774

Ø

AK12 Crystal Knob 16

28

25

RIK281

RIK282

Square D Wide Pillar Crystal Handle 128 158 9.5 32 RIH1567

13

1

DECORATIVE HARDWARE 1.2 Contemporary Handles and Knobs new Item No: 1758

new Item No: 1757

Ø

Slot Handle 128

192

135

168

18

18

28

28

RIH1501

RIH1503

RIH1502

RIH1504

Dimple Knob 33 25 RIH1499 RIH1500

new Item No: 1756

new Item No: 1754

Aphrodita Crystal Handle & Knob 160

320

Knob

198 9 30

358 9 30

48 11 20

RIH1496

RIH1497 RIH1498

Stellar Crystal Handle 128

new Item No: 1745

14

192

140

202

12

12

26

26

RIH1491 RIH1492

RIH1493

Square Crystal Knob Knob

Knob

30 x 30

44 x 44

30

30

RIH1495

RIH1494

DECORATIVE HARDWARE

1

1.2 Contemporary Handles & Knobs new Item No: 1626

new Item No: 1627

new Item No: 1118

d

woo

d woo

Maniglia Handle 320

160

340 30 30

185 27 27

RIH1449

RIH1450

Twisted Handle 320 352 32 25

160 194 28 25

RIH1451

RIH1452

Oak Half Round Arch 128 165 20 30

192 233 20 35

RWH680 RWH681

RWH682 RWH683

15

1

DECORATIVE HARDWARE 1.3 Wooden Handles

new Item No: 1119

d

woo

d

woo

Item No: 1120

new

12mm Square-D Wide Pillar 128 147

192 211

12 30

12 30

RWH684 RWH685

RWH686 RWH687

20mm Square D-handle with Wide Pillar 128

192

147

211

20

20

30

30

d

RWH688

RWH690

d

RWH689

RWH691

woo woo

new Item No: 1121

30mm Square-D Wide Pillar 192 211 30 30

d

woo

d woo

16

RWH692 RWH693

DECORATIVE HARDWARE

1

1.4 Antique Handles and Knobs new Item No: 1765

Victoria Handle 96 110 16 22 RIH1522 RIH1523 RIH1524

new Item No: 1768

Regent Handle 76 104 22 22 RIH1534 RIH1533

new Item No: 1770

Bastion Handle 96 162 18 22 RIH1538 RIH1539

new Item No: 1766

Ø

new Item No: 1769

Bastion Knob 32

new Item No: 1767

Ø

Paris Drop Handle 33

25

55

RIK279 RIK278

RIH1531 RIH1532

Buttercup Handle 64 104 28 25 RIH1535 RIH1537 RIH1536

17

1

DECORATIVE HARDWARE 1.5 Aluminium Finger Grips new Finger Grips Flat - Small (Natural Anodised)

Description Small Finger Grip Flat

3.2 6.4

Item No: 1132

Size

RS Code

147mm 297mm 310mm 371mm 397mm 447mm 497mm 597mm 747mm 897mm 3m lengths

RAH800 RAH801 RAH802 RAH803 RAH804 RAH805 RAH806 RAH807 RAH808 RAH809 RAH840

10 new Finger Grips Flat - Large (Natural Anodised)

11.5

Description

19

Large Finger Grip Flat

30

10 6.4 3.2

3.2 6.4

RS Code

147mm 297mm 310mm 371mm 397mm 447mm 497mm 597mm 747mm 897mm 3m lengths

RAH810 RAH811 RAH812 RAH813 RAH814 RAH815 RAH816 RAH817 RAH818 RAH819 RAH841

new Finger Grips Curved - Small (Natural Anodised)

Description Small Finger Grip Curved

10 21

19 42.5

Description Large Finger Grip Curved

6.4 3.2

35

RS Code

147mm 297mm 310mm 371mm 397mm 447mm 497mm 597mm 747mm 897mm 3m lengths

RAH820 RAH821 RAH822 RAH823 RAH824 RAH825 RAH826 RAH827 RAH828 RAH829 RAH842

Aluminium Finger Grip 19.5

18

Item No: 1135

Size

RS Code

147mm 297mm 310mm 371mm 397mm 447mm 497mm 597mm 747mm 897mm 3m lengths

RAH830 RAH831 RAH832 RAH833 RAH834 RAH835 RAH836 RAH837 RAH838 RAH839 RAH843

new Aluminium Handle Edge AE2519

Description

Item No: 1134

Size

new Finger Grips Curved - Large (Natural Anodised)

10

Item No: 1133

Size

Item No: 1827 Size

RS Code

3m length

RIH1807

DECORATIVE HARDWARE

1

1.5 Aluminium Finger Grips new Finger Grips 1 Flat - Large Grip

Description Finger Grip Flat

Item No: 1595

Size 297mm 397mm 447mm 497mm 597mm 747mm 897mm

RAH859 RAH862 RAH865 RAH868 RAH871 RAH874 RAH877

RAH860 RAH863 RAH866 RAH869 RAH872 RAH875 RAH878

RAH861 RAH864 RAH867 RAH870 RAH873 RAH876 RAH879 32

297/397/447/497/597/747/897 19.2 50

Size

Finger Grip

297mm 397mm 447mm 497mm 597mm 747mm 897mm

197/297/347/397/497/647/797

7.4

50

3.2

new Finger Grip 2 Angled Large Grip

Description

13

10

Item No: 1597

RAH898 RAH900 RAH902 RAH904 RAH906 RAH908 RAH910

RAH899 RAH901 RAH903 RAH905 RAH907 RAH909 RAH911 36.5

297/397/447/497/597/747/897 19.2

10 50

197/297/347/397/497/647/797

17.7

7.4

50

3.2

new Finger Grip 2 Angled Centre Rounded

Description

Size

Finger Grip

297mm 397mm 447mm 497mm 597mm 747mm 897mm

Item No: 1596

RAH883 RAH885 RAH887 RAH889 RAH891 RAH894 RAH896

RAH884 RAH886 RAH888 RAH890 RAH892 RAH895 RAH897

36.5 297/397/447/497/597/747/897 10

19.2

3.2

150

new Finger Grip 3 Flat Large Rounded

17.7

7.4

Item No: 1594

Description

Size

Finger Grip

297mm 397mm

RAH845 RAH847

RAH846 RAH848

447mm 497mm 597mm 747mm 897mm

RAH849 RAH851 RAH853 RAH855 RAH857

RAH850 RAH852 RAH854 RAH856 RAH858

297/397/447/497/597/747/897 36

19.2

13

10 7.4 35

3.2

Note: Subtract 2mm on your door or drawer height to accommodate the finger grip. Applicable to all four products on this page. 19

1

DECORATIVE HARDWARE 1.5 Aluminium Finger Grips new Aluminium Handle Edge - AH6001, 3m lengths

Description

Item No: 1828 RS Code

Aluminium Handle Edge - AH 6001

RIH1805

49

new Aluminium Handle Edge - AH6002, 3m lengths

Description

Item No: 1829 RS Code

Aluminium Handle Edge - AH 6002

RIH1806

66

new Stainless Steel Corner Bracket - CS-02

Description

Item No: 1830 RS Code

Stainless steel corner bracket - CS-02

new Small Flat Finger Grip, 3m lengths

RIH1809

Item No: 1831

Description

RS Code

Small Flat Finger Grip, 3m lengths

RAH840

11.5 10 6.4

3.2 new Aluminium Finger Grip, 3m lengths

Description Aluminium Finger Grip, 3m lengths door 19.5 10 cabinet bottom

20

6.4

3.2

Grip doors from behind to open door. Handleless doors.

Item No: 1034 RS Code RIH1808

DECORATIVE HARDWARE

1

1.5 Aluminium Finger Grips The Handle Profile 3PH can either be made to fit your door as a pocket handle or be used to fit the full width of your door. The profile can either be purchased in 4m lengths as well as the two various end caps, either for a pocket or a full width version. Pre-cut lengths are available in the following sizes: new Handle Profle 3PH Pocket

Description

Item No: 1700 Size

Handle Profile 3PH

For Door Width

186mm

296

RIH1810

RIH1791

Pocket Version Can be cut to any sizes which then is fitted on top of the door or drawer. End caps for pocket are then screwed onto the sides of the handle.

286mm 336mm

396 446

RIH1811 RIH1812

RIH1792 RIH1793

Calculation for cutting 3VPH handle, width of your door minus 110mm. Calculation material subtract 10mm for the ends caps.

386mm 486mm 636mm 786mm

496 596 746 896

RIH1813 RIH1814 RIH1815 RIH1816

RIH1794 RIH1795 RIH1796 RIH1797

new Handle Profle 3PH Full Length

Description

RS Code

eg. door width 296mm, 296-110mm = 186mm, actual material length 186mm - 10mm = 176mm step1 - EA4 sides of door

step3 - make a 3.5mm groove

step2 - router out pocket

Item No: 1701

Size

Handle Profile 3PH

RS Code

296mm 396mm 446mm 496mm 596mm 746mm 896mm

new Handle Profle 3PH

For Door Width 296 396 446 496 596 746 896

RS Code RIH1817 RIH1818 RIH1819 RIH1820 RIH1821 RIH1822 RIH1823

RS Code RIH1798 RIH1799 RIH1800 RIH1801 RIH1802 RIH1803 RIH1804

step - create 12mm depth groove

Item No: 1560

Description

Size

Handle Profile 3PH

Finish

RS Code

4m

RIH1397

4m

RIH1622

19

Full Width Version Can be cut to any sizes which the full width end caps are then fixed with a super strong, fast curing glue (superglue ) only a small drip at the tongue of the end cap. The door or drawer must be grooved 3.5mm by 12mm deep. Cold glue can be used in the groove and left to set. Calculation for cutting 3VPH handle, finished size minus 14mm for the end caps. eg. door width 296mm, actual material length 296mm - 14mm = 282mm

45

new End Cap 3PH Full Width

Description End Cap Full Width End Cap Full Width

10

Item No: 1562 Finish RS Code RIH1399 RIH1624

8 3.2 new End Cap 3PH Pocket

Super Glue

Item No: 1035

Description

Size

RS Code

Super Glue

3g

RKW358

Description End Cap Pocket Version End Cap Pocket Version

Item No: 1561 Finish RS Code RIH1398 RIH1623

21

2

TABLE LEGS 2.1 Kitchen Table Legs

Ø80 x 1100 Brushed Satin Nickel

Ø60 x 700 Brushed Satin Nickel

Ø80 x 870 Brushed Satin Nickel

Ø60 x 700 Natural Anodised

Ø60 x 700 Natural Anodised

Round Legs 1100/870/700 new R

Square leg 700 x 60 x 60 RS Code Item No:

700 x 60 x 60mm Leg BSN

700 x 60 x 60mm RKL290 103

140mm

Size

140mm

Description

140mm

Ø80 x 870 Stainless Steel

*Legs are available standard with a centre fixed base plates. Side fixing base plates are available which have to be orderd seperately. Universal base plates for side and centre fixing available soon.

Description

Size

RS Code

Item No:

700 x 60 Leg BSN

700 x Ø60mm

RKL307

103

870 x 60 Leg BSN 700 X 80 Leg BSN 870 x 80 Leg BSN 1100 x 80 Leg BSN

870 x Ø60mm 700 x Ø80mm 870 x Ø80mm 1100 x Ø80mm

RKL310 RKL308 RKL309 RKL311

104 106 107 108

new *Square legs 700/870 x 80 x 80

Description

Size

700 x 80 x 80 Leg Stainless Steel Hairline 700 x 80 x 80mm

new Counter Leg

Description

Size

RS Code Item No:

Counter Leg NA Counter Leg Stainless Steel Hairline

60 x 60 x 870mm RKL304 1532 60 x 60 x 870mm RKL305 1532

220mm

RS Code

Item No:

RKL295

1523

700 x 80 x 80 Leg Aluminium 700 x 80 x 80mm RKL294 1523 870 x 80 x 80 Leg Stainless Steel Hairline 870 x 80 x 80mm RKL297 1523 870 x 80 x 80 Leg Aluminium 870 x 80 x 80mm RKL296 1523 Side Fixing Base Plate for 80 Leg 140 x 140 x 5mm RKL364 1524 *All legs supplied with centre fixing base plates, side fixing base plates are available

105mm

new * Square legs 700/870 x 60 x 60

Description

Size

RS Code

Item No:

870mm

700 x 60 x 60 Leg Stainless Steel Hairline 700 x 60 x 60mm RKL299 1525 700 x 60 x 60 Leg Aluminium 700 x 60 x 60mm RKL298 1525 870 x 60 x 60 Leg Stainless Steel Hairline 870 x 60 x 60mm RKL301 1525 870 x 60 x 60 Leg Aluminium 870 x 60 x 60mm RKL300 1525 Side Fixing Base Plate for 60 Leg 105 x 105 x 5mm RKL365 1531 *All legs supplied with centre fixing base plates, side fixing base plates are available new *Leg Round Edges 700 x 60 x 60

Description 60 x 60mm

22

60 /

80

Size

RS Code

Item No:

700 x 60 x 60 Leg Stainless Steel Hairline 700 x 60 x 60mm RKL303 1526 700 x 60 x 60 Leg Aluminium 700 x 60 x 60mm RKL302 1526 Side Fixing Base Plate Round Edges Leg 105 x 105 x 5mm RKL363 1533 *All legs supplied with centre fixing base plates, side fixing base plates are available

TABLE LEGS

2

2.2 Office Table Legs

700 x Ø60 Silver

700 x Ø80 Charcoal

700 x Ø50 Tapered Brushed Nickel

700 x 60 Charcoal

700 x Ø50 Angled Tapered Charcoal

140

new Office Legs

Description

Size

BN

Silver

Charcoal

Item No.

700 x Ø80 Leg 700 x Ø60 Round Leg 700 x 60 Square Leg 700 x Ø50 Tappered Leg

700 x Ø80 700 x Ø60 700 x 60 x 60 700 x Ø50

RKL314 RKL388 RKL338 RKL317

RKL312 RKL389 RKL337 RKL315

RKL313 RKL390 RKL336 RKL316

1527 103 1585 1529

700 x Ø50 Angled Leg

700 x Ø50

RKL341

RKL340 RKL339

1586

96

Top Plate

140

96

3

new Ø60 Round & 60 Square Couch Feet & Coffee Table Legs

Description

Size

BN

Silver

Charcoal

Couch Feet Ø60

150 x Ø60

RKL381

RKL382 RKL383

1613

Coffee Table Leg Ø60 Couch Feet 60 mm Coffee Table Leg 60 mm

380 x Ø60 RKL384 150 x 60 x 60 RKL375 380 x 60 x 60 RKL378

RKL385 RKL386 RKL376 RKL377 RKL379 RKL380

1614 1611 1612

90

Item No.

90

90

90

60 x 60 Top Plate

60

380

Ø60

Ø60

380

150

150

Ø60 Top Plate

60

23

2

TABLE LEGS 2.3 Aluminium Legs

Size

65.5

48

Concealed

Small

Large

Description

Size

RS Code

Square Leg Concealed Base

75mm

RKL154

Square Leg Concealed Base Square Leg Concealed Base

105mm 145mm

RKL152 RKL159

Square Leg Small Base Square Leg Small Base

85mm 115mm

RKL153 RKL160

Square Leg Small Base

155mm

RKL158

Square Leg Large Base Square Leg Large Base

85mm 115mm

RKL166 RKL165

Square Leg Large Base

155mm

RKL164

65.5 Large

Round Leg Couch Feet

Item No: 473/474/475

Description

Size

RS Code

75mm 105mm 145mm 85mm 115mm 155mm 85mm 115mm 155mm

RKL163 RKL161 RKL162 RKL157 RKL156 RKL155 RKL169 RKL168 RKL167

Round Leg Concealed Base Round Leg Concealed Base Round Leg Concealed Base Round Leg Small Base Round Leg Small Base Round Leg Small Base Round Leg Large Base Round Leg Large Base Round Leg Large Base

Size Small

Item No: 476/477/478

40

48

Concealed

Square Leg Couch Feet

Ø40

48 new Square Leg Couch Feet

Size

65.5

Description

Concealed

Small

Large 40

Square Leg Concealed Base Square Leg Concealed Base Square Leg Concealed Base Square Leg Small Base Square Leg Small Base Square Leg Small Base Square Leg Large Base Square Leg Large Base Square Leg Large Base

Item No: 476/477/478 Size

RS Code

75mm 105mm 145mm 85mm 115mm 155mm 85mm 115mm 155mm

RKL321 RKL322 RKL323 RKL335 RKL326 RKL327 RKL324 RKL334 RKL325

48

65.5

new Round Leg Couch Feet

Size

Description

Concealed

24

Small

Large

Ø40

Item No: 473/474/475 Size

RS Code

Round Leg Concealed Base Round Leg Concealed Base Round Leg Concealed Base Round Leg Small Base Round Leg Small Base Round Leg Small Base

75mm 105mm 145mm 85mm 115mm 155mm

RKL318 RKL328 RKL319 RKL320 RKL332 RKL333

Round Leg Large Base Round Leg Large Base Round Leg Large Base

85mm 115mm 155mm

RKL329 RKL330 RKL331

TABLE LEGS

2

2.4 Universal Consoles and Couch Feet Selecting the various console components, which are sold separately, various combinations are possible to create various applications. NB! All components are sold separately - you choose and create! Aluminium available in Natural Anodised and Brushed Nickel.

new 40 x 40mm Square Aluminium Console

Description

new Ø40mm Round Aluminium Console

Item No: 1784 Size

RS Code RS Code RKL394

RKL395

40 x 40mm Square Aluminium Console 100mm

RKL396

RKL397

40 x 40mm Square Aluminium Console 80mm 40 x 40mm Square Aluminium Console 35mm

RKL398 RKL400

RKL399 RKL401

40

Ø40

Description

Size

RS Code RS Code

Ø40mm Round Aluminium Console Ø40mm Round Aluminium Console

150mm RKL410 100mm RKL412

RKL411 RKL413

Ø40mm Round Aluminium Console Ø40mm Round Aluminium Console

80mm 35mm

RKL415 RKL417

RKL414 RKL416

150/100/80/35

40 x 40mm Square Aluminium Console 150mm

Item No: 1786

new Ø40 x 12mm Round End Cap

Item No: 1792 RS Code RS Code

40 x 12mm Square End Cap

RKL432 RKL433

40

Ø40

12

Description

new 40 x 12mm Square Fusing Disc Item No: 1793

Description

Description

RKL433

RS Code RS Code

new Ø24.5mm Round Aluminium Console Item No: 1787

RS Code RS Code RKL402 RKL404 RKL406 RKL408

Description

Size

RS Code RS Code

Ø24.5mm Round Aluminium Console Ø24.5mm Round Aluminium Console Ø24.5mm Round Aluminium Console Ø24.5mm Round Aluminium Console

135mm 95mm 60mm 25mm

RKL418 RKL420 RKL422 RKL424

Ø24.5

RKL403 RKL405 RKL407 RKL409

RKL419 RKL421 RKL423 RKL425

135/95/60/25

135mm 95mm 60mm 25mm

RKL426 RKL427

Ø40 x 12mm Round Fusing Disc RKL428 RKL427

25

25 x 25mm Square Aluminium Console 25 x 25mm Square Aluminium Console 25 x 25mm Square Aluminium Console 25 x 25mm Square Aluminium Console

Ø40 x 12mm Round End Cap

Brushed Nickel End Cap also used as a Fusing Disc.

Item No: 1785 Size

RS Code RS Code

Description

Brushed Nickel End Cap also used as a Fusing Disc. new 25 x 25mm Square Aluminium Console

Description

new Ø40 x 12mm Round Fusing Disc Item No: 1789

RS Code RS Code

40 x 12mm Square Fusing Disc RKL434

Item No: 1788

12

new 40 x 12mm Square End Cap

25

2

TABLE LEGS 2.4 Universal Consoles and Couch Feet new Ø24.5 x 12mm Round End Cap Item No: 1790

Item No: 1794 RS Code RS Code

25 x 12mm Square End Cap

RKL435 RKL436

Description

25

new 25x 12mm Square Fusing Disc Item No: 1795

Description

new Ø40 x 12mm Round Fusing Disc

Description

RS Code RS Code

25 x 12mm Square Fusing Disc RKL437

Item No: 1791 RS Code RS Code

Ø24.5 x 12mm Round Fusing Disc RKL431 RKL430

RKL436

Brushed Nickel End Cap also used as a Fusing Disc.

Brushed Nickel End Cap also used as a Fusing Disc.

new Ø40 x 20mm Round Base Foot Item No: 1798

Description

RS Code RS Code

Ø24.5 x 12mm Round End Cap RKL429 RKL430

Ø24.5

12

Description

12

new 25 x 12mm Square End Cap

new Rubber Cushion Disc for Glass

RS Code RS Code Ø40

Description

RS Code

Ø39.5 x 1mm Rubber Cushion Disc for Glass Ø24 x 1mm Rubber Cushion Disc for Glass

RKL438 RKL439

Ø24

20

Ø39.5

Ø40 x 20mm Round Base Foot RKL440 RKL441

Item No: 1797

new M10 Bolts

Item No: 1835

new M10 Ready Bolts

RS Code

Description

RS Code

M10 x 45 Bolt & washer for 32mm tops M10 x 35 Bolt & washer for 16-22mm tops M10 x 15 Bolt for fastening the top plate

RKL445 RKL446 RKL447

M10 x 35 Ready Bolt for end caps & base foot M10 x 20 Ready Bolt for fusing discs

RKL443 RKL444

15

35

45

35

20

Description

new Round Fusing Discs for Legs

Description new 65 x 65 Top Plate

Size

RS Code

65 x 65mm Top Plate

65 x 65

RKL442

Ø62/Ø82

12

65

Description

Item No: 1837 Size

RS Code RS Code

Round fusing disc for Ø60mm legs Ø62 x 12 RKL448 RKL449 Round fusing disc for Ø80mm legs Ø82 x 12 RKL450 RKL451

Item No: 1799

8

26

Item No: 1836

2

TABLE LEGS

2

2.4 Universal Consoles and Couch Feet Selecting the various console components, which are sold separately, various combinations are possible to create various applications. Aluminium available in Natural Anodised and Brushed Nickel. NB! All components are sold separately - you choose and create!

End Cap square or round. Glass

M10x30 Ready Bolt for glass or minimum 8mm in thickness.

Glass

Fusing Disc square or round.

Glass Rubber used between the glass and aluminium end cap and console.

M10x20 Ready Bolt used to fasten the fusing disc to the aluminium console.

Aluminium consols available in two sizes and four height sizes.

40x40

Ø40

25x25

Aluminium consoles available in two sizes and four height sizes.

Ø24.5

40x40

M10x45 Bolt to fasten the console to a maximum 38mm top or a M10x35 bolt can be used if a minimum 16 top is used.

Ø40

25x25

Ø24.5

M10x45 Bolt to fasten the console to a maximum 38mm top or a M10x35 bolt can be used if a minimum 16 top is used.

Application 1

Application 2

A Ø10.5mm hole is drilled through the glass, which is then fastened to the console using a round or square end cap.

A fusing disc is fused to the glass.

Wood Cabinet 65 x 65 top plate M10x15 Bolt used to fasten the top to the console.

65 x 65 top plate M10x15 Bolt used to fasten the top plate to the console/leg.

Aluminium consoles available in two sizes and four height sizes.

40x40

Ø40

Aluminium console/leg available in one size and four height sizes.

25x25 Ø24.5 Ø40

M10x45 Bolt to fasten the console to maximum 38mm top or a M10x35 bolt can be used if a minimum 16 top is used.

M10x20 Ready Bolt used to fasten the base foot to the aluminium console/leg.

Application 3

Application 4

The console is fitted to a wooden top.

The console is fitted as a leg underneath a cabinet. Square leg application refer to page 24

Glass

Glass

Ø62mm Fusing disc for a Ø60mm leg

Ø82mm Fusing disc for a Ø80mm leg

Application 5

Application 6

Fusing a Ø60mm leg on a glass top using a Ø62mm fusing disc.

Fusing a Ø80mm leg on a glass top using a Ø82mm fusing disc.

27

2

TABLE LEGS 2.5 Cabinet and Couch Feet 45

45

Item No: 1094

Description

Size

RS Code

new Square Leg 80 x 40 x 40mm, Satin Nickel new Square Leg 150 x 40 x 40mm, Satin Nickel

80mm

RKL291

150mm

RKL292

new Dune

Item No: 1580

80 / 150

60

Square Leg

Description

Size

RS Code

Dune Aluminium Polished

140mm

RKL369

20

95

35

80 50

140

135

new Nave

235

Item No: 1579

Description

Size

RS Code

Nave Aluminium Polished

100mm

RKL368

45

120

100

M10

new Vuzero

Item No: 1575

Description

Size

RS Code

Vuzero Aluminium Polished

40mm

RKL372

225

Ø10

28

Ø10

Ø40

TABLE LEGS

2

2.5 Cabinet and Couch Feet new Angelo

105

Item No: 1578 Size

RS Code

Angelo Aluminium Polished

170mm

RKL371

170

105

Description

new Sesto

105

Item No: 1581 Size

RS Code

Sesto Chrome

130mm

RKL367

130 170

105

Description

90 60

Size

RS Code

Spigolo Aluminium Polished

130mm

RKL370

35

Description

20

Item No: 1577

105

130

new Spigolo

29

2

TABLE LEGS 2.6 Aluminium Frame Components A wide variety of applications which include: Aluminium Framed Island Units, Aluminium Framed Tables, Aluminium Framed Trolley’s, Easy Drilling Jigs available for easy drilling and assembling, DIY Ready. new Aluminium Frame 38mm & 40mm

new Corner Fitting - Screws included

Item No: 1306

Item No: 1658

Size

RS Code

Description

RS Code

Aluminium Frame 6252B (3m Lengths)

38 x 38mm

RIH1252

Corner Fitting Silver - set of four

RIH1526

Aluminium Frame 6252B (3m Lengths)

38 x 38mm

RIH1254

Aluminium Frame 6252C (3m Lengths) Aluminium Frame 6252C (3m Lengths)

40 x 40mm 40 x 40mm

RIH1253 RIH1255

6252B

40mm

38mm

Description

38mm

new Eva Castor Dark Grey

new Wheel Fitting Grey

6252C

Item No: 1659

Description

RS Code

Wheel Fitting, M10 Grey - set of four

RIH1527

40mm

Item No: 1522

Description

Size

RS Code

Eva Dark Grey ABS Core, Light Grey PU Thread with brake

75mm

RIH1321

new Corner End Cap

Item No: 1660

Description

RS Code

Corner End Cap - set of four

RIH1528

42 M10

new Table Top Fastening Bracket

15 100

Item No: 1635

Description

RS Code

Table Top Fastening Bracket - set of four

RIH1529

Ø75

Island Units Application Example

30

TABLE LEGS

2

2.6 Aluminium Frame Components new Drilling Jigs

Item No:1664

Description

RS Code

Drilling Jig A

RIH1562

Drilling Jig B

RIH1563

Drilling Jig C

RIH1564

B

A

C

Tables

Trolleys

C

B

B

B

A

A

5

B

18

10

B

20

C 24.5

A

5

10

18

18

10

20

10

B

24.5

B 10

20

24.5

C

31

3

DOORS 3.1 Aluminium Sliding Door System The first DIY solution for the South African market. • Save bedroom space

• Modernise your home

• DIY solution • Ideal for bedrooms or room dividers

• Easy to assemble and fit • Fits wood, glass or mirror finishes

• Designed for standard SA board sizes • Accepts 16mm board or 5mm glass & mirror

Available kits: 1 Single Door Kit 2 x 2700 door profiles 1 x 2m top & bottom profile

5 H-Profile 1 x 1m H profile kit 2 x 20mm screws. 2 screw caps

2 2m Top & Bottom Track Kit 1 x 2m top track 1 x 2m bottom track

6 Glass Gasket 4 x 2700 length glass gasket (for glass s) 1 x 1m neopreen foam strip

3 3m Top & Bottom Track Kit 1 x 3m top track 1 x 3m bottom track

7 Dust Sealing Brush 1 Roll 10m (optional goes on one side of the door frame)

4 Top & Bottom Wheel Set 2 bottom wheels, 2 top wheels 1 allen key, 1 stopper, 12 screws

8 Double Sided Tape 1 roll 25m (if the bottom rail is fitted to a non-porous surface)

new Jack Doors

Description

Door Profile

Top Wheel

Bottom Wheel

Grip Handle

Top Profilee

H Profile

ett Glass Gasket

Top Track

Bottom Track

Sealing Dust Brush 1 roll 10m

Other Handle Option Finger Pull Flat RAH470 Alext16 RAH703

Item No: 1534 Kit

Door set single White Door set single Black Door set single Maple Door set single Cherry

RAD001 RAD002 RAD003 RAD004

Door set single Wenge Door set single NA

RAD005 RAD006

Top & bottom track set 2m Wenge Top & bottom track set 2m NA Top & bottom track set 2m White Top & bottom track set 2m Black

RAD007 RAD008 RAD009 RAD010

Top & bottom track set 2m Maple Top & bottom track set 2m Cherry

RAD011 RAD012

Top & bottom track set 3m White

RAD013

Top & bottom track set 3m Black Top & bottom track set 3m Maple Top & bottom track set 3m Cherry Top & bottom track set 3m Wenge

RAD014 RAD015 RAD016 RAD017

Top & bottom track set 3m NA

RAD018

Sliding door Wheel Kit

RAD019

H-Profile 1m White H-Profile 1m Black H-Profile 1m Maple H-Profile 1m Cherry

RAD020 RAD021 RAD022 RAD023

H-Profile 1m Wenge H-Profile 1m NA

RAD024 RAD025

Glass gasket set

RAD026

Sealing dust brush set

RAD027

Double sided tape

RAD028

Grip handle 70mm Black Grip handle 70mm NA Grip handle 70mm White

RAD089 RAD090 RAD091

* All profiles are available in bulk on request

32

RS Code

DOORS

3

3.1 Aluminium Sliding Door System STEP ONE: TECHNICAL OVERVIEW

STEP TWO: ONE SLIDING DOOR CONSISTS OF THE FOLLOWING:

Understanding the Jack Sliding Door System

1

Single Door Kit

4

Wheel Set Kit

5 6

H-Profile Kit if there are more than one Glass Gasket if glass s are used

7

Brush (optional on one side of the door)

OW

OH

TWO EQUAL DOOR SEQUENCE Size per door = (open width - 34mm) ÷ 2 + 34mm

OW - Opening Width OH - Opening Height

THREE EQUAL DOORS Size per door = (open width - 34mm) ÷ 3 + 34mm

1

Firstly, measure the opening height and width where you would want to use the Jack Sliding Door System. The opening width will determine the length of the top & bottom track you require. Either a kit 2 which consists out of a 2m top & bottom track or a kit 3, a 3m top & bottom track. The maximum height of the opening must not be greater than 2730mm. When you have calculated and decided what door sequence you will use in each track, note that your maximum door width must not exceed 1068mm. Refer to door sequence formula table. When installing the Jack Sliding Door System in front of a cupboard, leave 110mm clear space in front, 82mm for the doors and an extra 28mm to avoid injury with your fingers when handling the doors.

2 2

1

Minimum sets needed for two doors: X2 1 Single Door kit & X2 4 Wheel Set kit

3

Minimum sets needed for three doors: X3 1 Single Door kit & X3 4 Wheel Set kit

FOUR EQUAL DOORS FIVE EQUAL DOORS Size per door = ( open width -34mm) ÷ 4 + 34mm Size per door = (open width – 34mm) ÷ 5 + 34 2 1

3

4

2

1

Minimum sets needed for four doors: X4 1 Single Door kit & X4 4 Wheel Set kit

4 3

5

Minimum sets needed for five doors: X5 1 Single Door kit & X5 4 Wheel Set kit

STEP THREE: Decide on the style of door by choosing one of the many sequences to suite your specifications and style. DOOR WIDTH CALCULATION: If the dust sealing brush is applied to the side profiles subtract 6mm from the open width. Decide how many s each door will have, and if glass or board s are used. This system accepts 16mm board or 5mm glass. Only toughened glass must be used. When a mirror is used make sure a safety film is applied to the back of the mirror. GENERAL: The door height is always the same which is the opening height minus 33mm. width is always the same which is the doors width minus 48mm. BOARD/GLASS HEIGHT CALCULATIONS:

min. 110mm FIG 1

ONE

TWO EQUAL S

height = door height - 6mm

height = (door height ÷ 2) - 6mm

THREE EQUAL S

UNEQUAL S

Outer height = (door height - 104 ÷ 3) +33 inner height (door height - 104 ÷ 3) +20

Outer height = (door height - 104 ÷ 3) +33 inner height (door height - 104 ÷ 3) +20

26mm 28mm

visible area

shelves

visible area

door height

26mm

26mm visible area 26mm

Finishes available: WHITE

STD MAPLE •

BLACK

WINSOR CHERRY •

SILVER MATT ANODISED

AFRICAN WENGE •

• Matches PG Bison Melawood range

Component formula’s Top and bottom track

Open width - 1mm

Top and bottom U-channel

Door width - 68mm

Vertical Profile (Door height)

Open height - 33mm

H-profile

Door width - 68mm

33

3

DOORS 3.2 Aluminium Glass Door Profiles P4, P6 & P7 All doors can be made to order in the 2 profiles and glass finishes depending on the specified requirements. Clear Glass, Frosted Glass, Clear Glass Frosted Film, Ocean View. Please note a technical information form will need to be filled out and the lead time from date of order will be approximately 2-3 weeks. We advise when placing the order that all lower level doors and handles or knobs which are fitted directly to the glass be ordered with toughened glass to prevent any injury. All profiles can be purchased in lengths and the components separately for DIY, however the glass will not be supplied. Please note no hinges are supplied nor is any drilling for the hinges. Standard concealed hinges are used. Please refer to Section 10. P4 Profile

Item No: 530

P6 Profile

Item No: 1272

P7 Profile

Item No: 1305

Description

RS Code

Description

RS Code

Description

RS Code

P4 Profile 3m Length 3m Length 3m Length new

RIH784 RIH1249 RIH1250

new

new

P6 Profile 3m Length

Using Glass Gasket

Using Glass Gasket

22

22

44

44

Max. 5mm

Max. 5mm

Gasket

RIH1251 RIH1565

22

44

C5

3m Length new new 3M VHB Tape 25m roll

RIH785

Using Glass/Wood Gasket

C5

Using Glass/Wood Gasket

22

Gasket

Glass 4mm SPAR C5

3M tape

Bevel 1x1

44

Max. 7mm

3M tape

P4 Profile

P6 Profile

Gaskets

Item No: 518/520

Description

RS Code

S8 Dust Gasket for Wood/Glass up to 7mm - 3m Length S8-1 Dust Gasket for Glass up to 5mm - 3m Length

RIH781 RIH782

C5 Corner Bracket

Item No: 517

Description

RS Code

C5 Corner Bracket

1

(Set of 4 with screws)

21.5 68° ø8 21.5 ø4

34

P7 Profile

For Wood/Glass up to 7mm

Drilling detail for corner fitting

RIH780

Max. 7mm

For Glass up to 5mm

Steps to follow when ordering complete made doors: 1. 2. 3. 4.

Choose glass type. Indicate if you require the glass to be toughened. Choose Aluminium Profile P4, P6 or P7. Indicate : - size of door - handle positioning on glass or door frame - hinges are not supplied nor is any drilling Ordering forms are available at any one of our many branches or can be ed from our website: www.raiel.com.

SIBU DESIGN

4

4.1 Decorative Structure Sheets

new LL Leguan Nero N/A

Item No: 1273

Description

Size

RS Code

LL Leguan Nero N/A

2600 x 1000 x 1.6

RIS220

new SL Dakota Metal N/A

Item No: 1273

Description

Size

RS Code

SL Dakota Metal N/A

2612 x 1000 x 2

RIS221

new SL Lava Copper N/A

Item No: 1273

Description

Size

RS Code

SL Lava Copper N/A

2612 x 1000 x 1.7

RIS222

new SL Dakota Copper N/A

Item No: 1273

Description

Size

RS Code

SL Dakota Copper N/A

2612 x 1000 x 2

RIS223

new SL Urban Titan N/A

Item No: 1273

Description

Size

RS Code

SL Urban Titan N/A

2612 x 1000 x 2.2

RIS224

S/A = Self Adhesive N/A = Non Adhesive

35

5

CABINET ORGANISERS & ACCESSORIES 5.1 Cabinet Organisers Ring Wine Racks

Item No: 1117

Description

Size

RS Code

660 x 195 x 110mm

RKW432

960 x 195 x 110mm

RKW450

new 6 Ring Wine Rack new 9 Ring Wine Rack

645/960mm

Ø95mm

Item No: 885

Description

Size

RS Code

new Glass Rack (1 Column) new Glass Rack (2 Column)

340 x 115 x 63mm

RKW407

340 x 215 x 63mm

RKW408

Glass Rack (4 Column)

340 x 435 x 63mm

RKW311

3 Layer Spice Pull-out 200mm

Item No: 1521

Description

Size

RS Code

200mm

RKW102

19

0m

m

Ø6mm

Glass Rack

Min. Int. Depth 520mm

DOOR 525

Min. Int.Height 560mm

Min. Int. Width 168mm

SIDE

525

new 200mm Spice Pull-Out 40

A6 128

A5 25 25 25

160

100

BT

A5 = 45mm + Door overhang to side A6 = 40mm + Door overhang to bottom Item No: 964

Description

Size

RS Code

450mm

RKW470

450mm 450mm 450mm 500mm 500mm 500mm 500mm

RKW471 RKW472 RKW473 RKW474 RKW475 RKW476 RKW477

Min. Int. Width 418mm for 450

new Wicker Basket Oak new Wicker Basket Maple new Wicker Basket Multi Colour Burgundy

Min. Int. Width 468mm for 500

new Wicker Basket Dark Burgundy

Multi Colour Burgundy

Maple

Dark Burgundy

Min. Int. Depth cabinet 510mm

Oak

Veggie baskets now sold with or without Clover runners. Spacers are sold seperately.

36

Wicker Baskets

new Wicker Basket Oak new Wicker Basket Maple new Wicker Basket Multi Colour Burgundy new Wicker Basket Dark Burgundy

Veggie Basket

Item No: 112

Description

Size

RS Code excl. runners

RS Code incl. runners

Veggie Basket White / Height 110mm Veggie Basket Silver / Height 110mm Veggie Basket White / Height 110mm Veggie Basket Silver / Height 110mm Veggie Basket White / Height 110mm Veggie Basket Silver / Height 110mm Veggie Basket White / Height 200mm Veggie Basket Silver / Height 200mm Veggie Basket White / Height 110mm Veggie Basket Silver / Height 110mm Veggie Basket White / Height 200mm Veggie Basket Silver / Height 200mm Veggie Basket White / Height 110mm Veggie Basket Silver / Height 110mm Veggie Spacer White

300mm 300mm 400mm 400mm 450mm 450mm 450mm 450mm 500mm 500mm 500mm 500mm 600mm 600mm 25mm

RKW321 RKW322 RKW123 RKW124 RKW125 RKW126 RKW324 RKW127 RKW128 RKW129 RKW130 RKW131 RKW132 RKW323 RKW133

RKW501 RKW502 RKW489 RKW490 RKW491 RKW492 RKW494 RKW493 RKW495 RKW496 RKW497 RKW498 RKW499 RKW500

CABINET ORGANISERS & ACCESSORIES

5

5.1 Cabinet Organisers Non Slip Mat

Item No: 917

Description

RS Code

Non-Slip Mat Light Grey 600mm x 1m x 1.5mm

RIH671

Non-Slip Mat Light Grey 600mm x 20m x 1.5mm

RIH674

Non-Slip Mat Light Grey 480mm x 1m x 1.5mm Non-Slip Mat Light Grey 480mm x 20m x1.5mm

RKW309 RKW310

new Non-Slip Mat White 480mm x 1m x1.5mm new Non-Slip Mat White 480mm x 20m x1.5mm new Non-Slip Mat Black 480mm x 1m x1.5mm

RKW453 RKW449

WHITE

RKW464 RKW463

new Non-Slip Mat Black 480mm x 20m x1.5mm

Broom Holder

Item No: 1446

Description

RS Code

new Broom Holder

RIH1296

Open Rail Holder 15mm

Item No: 782

Description

Size

GREY

Iron Holder

Item No: 1125

Description

RS Code

Iron Holder

RIH1114

RS Code

new Open Rail Holder 15mm - Silver Plastic 15 x 52mm

PCR150

Tie Rail 305mm

Item No: 1419

Description

Size

RS Code

305mm

RIH1295

new Tie Rail 305mm Nickel Plated

BLACK

Vacuum Fitting Holder

Item No: 1126

Description

RS Code

Vacuum Fitting Holder

RIH1115

37

5

CABINET ORGANISERS & ACCESSORIES 5.2 Wire Organisers new Spice Pull-out 150mm, Soft Close

Item No: 1810

Description

Size

RS Code

150mm Alu basket spice pull-out

150mm

RKW479

385

min 500

150

100

Load capacity 25kg

Load capacity 25kg

new Tray Basket 3 Layer

Item No: 1811

Description

Size

RS Code

Tray Basket 3 layer with metal base

200mm

RKW480

Tray Basket 3 layer with metal base Tray Basket 3 layer with wooden base Tray Basket 3 layer with wooden base

300mm 200mm 300mm

RKW481 RKW482 RKW456

385

Metal Base

min 500

200/300

Wooden Base 160/260

38

CABINET ORGANISERS & ACCESSORIES

5

5.2 Wire Organisers new Lazy Susan Unit

Item No: 1812

Description

Size

RS Code

270° Lazy Susan with metal basket

900mm

RKW483

270° Lazy Susan with wooden base

900mm

RKW458

Minimum Internal Cabinet Width 860mm

Minimum Internal Cabinet Width 860mm

400

400

Bottom

Load capacity 10kg per basket

Metal Basket

Wooden Base

new Magic Corner

Item No: 1813

Description

Size

RS Code

Magic Corner Universal with metal basket

660x515x600mm RKW484

Magic Corner Universal with wooden base

660x515x600mm RKW461

Minimum Internal Depth 550mm

Minimum Internal Width 700mm

Minimum door opening 450mm

Load capacity 6kg per basket

Wooden Base

Metal Basket

39

5

CABINET ORGANISERS & ACCESSORIES 5.2 Wire Organisers new 110° Tandem Pantry Unit

Item No: 1814

Description

Size

110° Tandem Unit with metal basket

450/500mm RKW485

110° Tandem Unit with wooden basket

450/500mm RKW457

Height 1959 - 2359mm

450/500

min 550

385

Metal Basket

Load capacity 5kg big basket and 2kg small basket

40

Wooden Base

RS Code

CABINET ORGANISERS & ACCESSORIES

5

5.2 Wire Organisers new High Pantry Pull-Out with Soft Closing

Item No: 1815

Description

Size

RS Code

High Pantry Pull-Out with metal basket, 6 layer

300mm

RKW455

High Pantry Pull-Out with metal basket, 6 layer

400mm

RKW486

High Pantry Pull-Out with wooden basket, 6 layer High Pantry Pull-Out with wooden basket, 6 layer

300mm 400mm

RKW487 RKW454

Height 1959 - 2359mm 300/400

460

min 550

min 550

250/350

Wooden trays

Metal trays

Load capacity 10kg per basket

41

5

CABINET ORGANISERS & ACCESSORIES 5.2 Wire Organisers new Revolving High Pantry Pull-Out with Soft Closing

Item No: 1816

Description

Size

RS Code

High Pantry pull-out with metal basket, 6 layer

400mm

RKW488

High Pantry pull-out with wooden basket,6 layer

400mm

RKW459

Height 1959 - 2359mm

400

538

min 550

min 550

350

Wooden trays

Metal baskets

Load capacity 10kg per basket

42

min 375

CABINET ORGANISERS & ACCESSORIES

5

5.3 Drawer Organisers - Adjustable Cutlery Trays

Movable (adjustable) dividers

900mm (see max & min)

Cutlery Tray

Item No: 669

Description

Width

RS Code

Cutlery Tray Grey Cutlery Tray White

900mm 900mm

RIH1090 RIH1094

Cutlery Tray Grey Cutlery Tray White

600mm 600mm

RIH1089 RIH1093

Cutlery Tray Grey Cutlery Tray White

500mm 500mm

RIH1088 RIH1092

Cutlery Tray Grey Cutlery Tray White

450mm 450mm

RIH1087 RIH1091

Cutlery Tray DIVIDER Grey Cutlery Tray DIVIDER White

142mm 142mm

RIH1096 RIH1098

Cutlery Tray DIVIDER Grey Cutlery Tray DIVIDER White

95mm 95mm Depth - all 480mm

RIH1095 RIH1097

600mm (see max & min)

Tray Maximum & Minimum cutting sizes for custom fitting Drawer Width

Maximum Size (dxy)

Minimum Size (dxy)

900mm 900mm 900mm 900mm

480 x 830mm 480 x 530mm 480 x 430mm 480 x 380mm

410 x 755mm 410 x 455mm 410 x 355mm 410 x 315mm

500mm (see max & min) Cutlery Tray DIVIDERS

450mm (see max & min)

Each tray is supplied with 2 small dividers (94mm) and 1 large divider (143mm). Extra dividers available on order.

43

5

CABINET ORGANISERS & ACCESSORIES 5.4 Lighting Solutions Fluorescent Cabinet Light

Item No: 1832

Description

Size

RS Code

Surface Mount Fluorescent Cabinet Light

Ø88mm

RKW409

LED Adjustable Downlight - set of 3

Item No: 1833

Description

Size

RS Code

LED Adjustable Downlight - set of 3 lights 1 x Transformer included Replacement Transformer

Ø52mm

RKW410

24mm

Ø88mm Leadwire 0.5m

35mm

Ø40mm

RKW429

Ø52mm Leadwire 1.5m (each set contains 3 lights)

Rectangular Surf/Mount Downlight

Item No: 1110

Description

Size

RS Code

13

50mm

Rectangular Surface Mounted Downlight 132 x 85 x 50mm RKW418 Transformer (sold separately) KET 60A RKW419 Replacement Bulbs 12 V RKW430

2m

m

1 x Transformer required for every 3 lights connected

mm

65mm

85

17

8m

44

m

m

9m

13

Rectangular Surf/Mount Downlight

Item No: 1113

Description

Size

RS Code

Rectangular Surface Mounted Downlight 178 x 139 x 65mm RKW420 with Socket (Transformer included) Replacement Bulbs 12 V RKW430

Full technical information available on request. Specifications and design subject to change without notice.

CABINET ORGANISERS & ACCESSORIES

5

5.4 Lighting Solutions Item No: 1109

Description

Size

RS Code

Corner Light with 4 Sockets (to fit 2-point plugs)

855mm

RKW417

Replacement corner light, phospor tube

18W

RKW428

65 mm

Corner Light with 4 Sockets

85 mm

855 mm

Butt t Connector

Description

Size

RS Code

Linkable Cabinet Light with Sensor

354 x 68 x 24mm

RKW413

Linkable Cabinet Light with Sensor Replacement Phosphor Tube Replacement Phosphor Tube

582 x 68 x 24mm 354mm (8W) 582mm (13W)

RKW414 RKW426 RKW427

68 mm

Item No: 1106

68 mm

Linkable Cabinet Light

24 mm

354 / 582 mm Can link up to maximum 10 identical units.

Closet Light with Sensor

Item No: 1834

Description

Size

RS Code

Closet Light with Sensor Closet Light with Sensor

867mm 1167mm

RKW411 RKW412

Replacement closet triphosphor fluo tube Replacement closet triphosphor fluo tube

867mm (14W) 1167mm (21W)

RKW425 RKW431

50mm

Detection angle 60˚ (maximum time duration 10sec, 3min or 5min preset) Motion Sensor

50mm Detection angle 110˚ (maximum time duration 3min)

867mm / 1167mm

Motion Sensor

45

5

CABINET ORGANISERS & ACCESSORIES 5.4 Lighting Solutions Fluorescent Cupboard Shelf Light

Item No: 1114

Description

Size

RS Code

Fluorescent Cupboard Shelf Light

867mm

RKW421

867mm

350mm

Push Button Switch

Item No: 1115

Description

Size

RS Code

Push Button Switch

35 x 23 x 11mm

RKW422

Full technical information available on request. Specifications & design subject to change without notice.

Push Button Switch - Switch activated with opening and closing of door. Magnetic Touch Switch

Item No: 1116

Description

Size

RS Code

Magnetic Touch Switch

Ø16mm x 11mm

RKW423

Full technical information available on request. Specifications & design subject to change without notice.

new Aluminium Led Strip

Item No: 1187/1188

Description

Size

RS Code

Aluminium Led Strip

865mm

RKW445

LED Driver 3 Way Connector

RKW446

867mm

new Surface Mount Int. Lighting EXT22

Item No: 1750

Description

Size

RS Code

Interior Lighting Surface Mount EXT22 Interior Lighting Surface Mount EXT22 Interior Lighting Surface Mount EXT22 24V Transformer

567mm 867mm 1168mm 24V

RKW503 RKW504 RKW514 RKW505

12

Interior lighting for pull-out units with 165mm light segments with an optical sensor. 22

46

CABINET ORGANISERS & ACCESSORIES

5

5.4 Lighting Solutions new ECOREGLED Surface Mount

Item No: 1751

Description

Size

RS Code

ECOREGLED Surface Mount 300mm

300mm

RKW506

ECOREGLED Surface Mount 900mm

900mm

RKW507

12V Transformer

12V

RKW508

The eco-FRIENDLY AND ECONOMICAL GENERATION of the surface-mounted series for COUNTERTOP lighting.

mm 100

12

34

Practical touch button for 100% power-on, 50% light reductions, power-off. new Recessed Profile INC30

Item No: 1752

Description

Size

RS Code

Recessed Profile INC30 Recessed Profile INC30 24V Transformer

567mm 867mm 24V

RKW509 RKW510 RKW505

10

Interior lighting for wall cabinets with optical sensor.

30

new Recessed Profile INC17 for Wardrobes

Item No: 1753

Description

Size

RS Code

Recessed Profile INC17 for wardrobes 24V Transformer

2400-2600mm 24V

RKW511 RKW505

12

Interior Lighting for Wardrobes with light segments and presence sensor.

17

47

5

CABINET ORGANISERS & ACCESSORIES 5.5 Shelf s Shelf

Item No: 1243

Description

Size

RS Code

Shelf 276LC

112mm

RIH1197

• • • • • •

For invisible fastening of shelves in woodwork or masonry Wood thicknesses: minimum 24mm Height adjustment: ±2mm Inclination adjustment via ing bolt which presses on the rear plate when turned in Distance between shelf s: maximum 700mm Shelf depth: maximum 300mm

min. 103 Ø12 22

4 70

112

14.5

Ø12

11 68

ing Bolt

54

20

6 6

Shelf (with locking mechanism)

Item No: 1244

Description

Size

Shelf 276 LCN

RS Code

112mm

Ø12

22

RIH1198

Ø15

• • • • •

A locking fitting prevents the t from disengagement For invisible fastening of shelves in woodwork or masonry Wood thicknesses: minimum 24mm Height adjustment: ±2mm Inclination adjustment via ing bolt which presses on the rear plate when turned in • Distance between shelf s: maximum 700mm • Shelf depth: maximum 300mm 112

70 14.5

68

92

54 Ø7

Ø12

6 11

20

6

105 93 5 Ø15

LOAD IN KG evenly distributed

10

20

15

10 200

DEPTH IN MM

48

Ø8

250

300

CABINET ORGANISERS & ACCESSORIES

5

5.5 Shelf s Heavy Duty Shelf

Item No: 1662

Description

RS Code

Shelf Concealed Heavy Duty Triade XXL

RIH1530

TRIADE XXL is a concealed mounting bracket for shelves minimum 40mm thick. It is provided with three independent adjustments: 1. Vertical 2. Horizontal 3. Inclination The capacity loading is 20kg each (shelf weight included) for a shelf max 400mm deep. Shelf minimum depth is 300mm.

Zinc Alloy and Steel

PATENT PENDING 62 28,5

3,5

Ø16

49

285

74,5

VERY IMPORTANT: Centre of the hole is shifted 3,5mm upwards. Please keep in mind when levelling the shelf.

FIXING TO CEMENT WALL FIXING: • to cement wall with rawlplugs Ø8mm & pan head screws Ø5x50mm.

VERY IMPORTANT: Triade XXL has to be installed with the arrow facing upwards.

It is the responsibility of the customer: • to ensure the wall is of a suitable quality to hold the shelf fixing in place.

SHELF INSERTING AND HORIZONTAL ADJUSTMENT Insert partially the shelf

Tilt the shelf to match both ing pins and shelf housings

+2

,5

+2

Adjust the shelf horizontally according to the application (i.e. multi-shelf composition)

,5

LOAD IN KG evenly distributed

COMBINATION SHELF LOAD AND SHELF DEPTH (The figures refer to ONE shelf ) 30

25

400

mm

MA X

20 200

DEPTH IN MM

250

300

350

400

++SHELF Kg MAX ShelfWEIGHT= weight =2020kg maximum

49

5

CABINET ORGANISERS & ACCESSORIES 5.6 Floating Cabinet Brackets

Heavy Duty Hanging Brackets The new patented 807 hanging system is a revolution for the world of suspended base cabinets. Made totally in metal, it has a thickness of only 10mm, and is able to very heavy loads with a guarantee of safety. The innovative and revolutionary anti-drop system which is activated automatically when the bracket is hooked into the wall plate and prevents the cabinet from accidentally falling from the wall. Tested to European norms EN14749, EN14688 and ISO 7170, it has a declared loading capacity of 120 kg, which is stamped on each piece. Very easy to fit, through 4 x 10mm diameter holes in the side of the cabinet, where the 4 dowels are inserted, it has an adjustment range of 19mm horizontally and 22mm vertically. The system is completed by a compatible cover in plastic. Load capacity: 120kg per bracket.

It is the responsibility of the customer: • to ensure the wall is of a suitable quality to hold shelf fixing in place. • to use the proper hardware fittings according to construction wall.

22mm 12

19mm new Base Cabinet Hanger

min 20

8

10 18 20

Description

RS Code

RH Base cabinet hanger LH Base cabinet hanger

RIH1488 RIH1489

32

50

Item No: 1657

Description

RS Code

Anti drop wall plate

RIH1490

new Hanging Bracket Cover Cap

Ø10

30

64 12

new Anti Drop Wall Plate

20

Item No: 1657

Item No: 1657

Description

RS Code

RH White Cover cap LH White Cover cap

RIH1486 RIH1487

CABINET ORGANISERS & ACCESSORIES

5

5.6 Floating Cabinet Brackets

96

230 96

18

32 26 64 100

Top 64

5mm up or down adjustment

Floating Cabinet Bracket Heavy Duty

Item No: 1653

Description

RS Code

new Floating Cabinet Bracket Heavy Duty

RIH1427

Side

64 195

Black Board cut out detail

182.5

250kg load capacity per bracket

35

Load capacity: 250kg per bracket. 2.5mm steel.

51

6

HARDWARE 6.1 Wire Management 22

Ø80

new Wire Management

Item No: 1503

Description

RS Code

80mm Round Wire Management Brush Nickel 737

RIH1313

80mm Round Wire Management White 737

RIH1312

80mm Round Wire Management Black 737

RIH1311

Ø87

22

Ø80

new Wire Management

Item No: 1536

Description

RS Code

80mm Round Wire Management Black 80mm Round Wire Management Oak 80mm Round Wire Management Silver

RIH1247 RIH1248 RIH1629

95

22

new Wire Management

Item No: 1554

Description

85

RS Code

80mm Square Wire Management Black BK 737-80F RIH1316 80mm Square Wire Management Brush Nickel BK 737-80F RIH1317

Ø80

85

22

new Wire Management

85

Ø80

Item No: 1555

Description

RS Code

80mm Square Wire Management Black BK 738-80F

RIH1315

85 22

new Wire Management

Item No: 1556

Description

RS Code

80mm Round Wire Management Black BK 738-80Y

RIH1314

Ø80

new Hole Saw Cutter

Item No: 1800

Description

RS Code

Ø60 Hole Saw Cutter Ø80 Hole Saw Cutter

RIH1616 RIH1615

Ø85

Ø70 20 Ø60

52

60mm Wire Management

Item No: 921

Description

RS Code

Black Grey Oak

RIH646 RIH648 RIH647

HARDWARE

6

6.2 Wire Managements & Vents

new new

Cable Outlets

Item No: 1136

Description

Size

RS Code

Cable Outlet (oblong)

240 x 80 x 13mm

RKW433

Cable Outlet (square)

80 x 80 x 13mm

RKW434

80

240

80

80

70

70

14

14

70

230

Aluminium Air Vent

Item No: 791

Description

Size

RS Code

400 x 80mm

RIH1108

new Aluminium Air Vent

400

80

65

380

1.20 17.80

320

Description

Size

RS Code

225 x 65 x 10mm 225 x 65 x 10mm

RIH1186 RIH1120

new Plastic Airvent (Brown) new Plastic Airvent (Silver)

225

60

Item No: 1131

67

Plastic Airvents

10

219

53

6

HARDWARE 6.3 Knock Down Fittings Brown & White Plastic Rafix

Item No: 1141

Description

RS Code

Description

20mm BROWN Plastic Rafix with die-cast cam

RIH1125

Wedge Fitting Black

RIH1178

20mm WHITE Plastic Rafix with die-cast cam

RIH1126

Wedge Fitting White

RIH1179

Wedge Fitting Grey Wedge Fitting Cherry

RIH1180 RIH1181

Wedge Fitting Oak

RIH1182

Wedge Fitting Brown

RIH1183

new Wedge Fitting

1.2 12.5

Item No: 1280 RS Code

20

8 22

Drilling A 9.5

24

M4 Connecting Bolt for sleeve

Item No: 1145

Description

RS Code

M4 Connecting Bolt for sleeve

RIH1130

Double sided assembly using 2 connecting screws with M4 threads in a sleeve for Ø5mm hole.

A

M4

Plastice Rafix without Cam

Item No: 1142

Description

RS Code

20mm WHITE Plastic Rafix without Cam

RIH1127 1.2

Ø5

A

20

12.5

8 9.5

22

24

Rafix Pin with Euro Thread

Item No: 1143

Description

RS Code

Rafix pin with Euro Thread

Modesty Blocks

Item No: 1391

Description

RS Code

new Modesty Block White Plastic

RIH1128

new Modesty Block Oak Plastic new Modesty Block Brown Plastic

for Ø5 hole

54

RIH1291 RIH1299 RIH1292

HARDWARE

6

6.3 Knock Down Fittings Zinc Cam

Item No: 1137

Description

RS Code

15mm Zinc Cam only

RIH1121

34.5 Ø15 8

12.5

12

Ø8

Ø15

Corner Pin (Euro thread)

Item No: 1138

Description

RS Code

Corner pin 15mm with Euro thread

RIH1122

Corner Pin (M6 thread)

Item No: 1293

Description

RS Code

34mm Corner Pin M6

RIH1123

for Ø5 hole

34

M6

34

(used with Nylon Dowel)

Corner Pin (M4 thread)

Item No: 1139

Description

RS Code

Corner Pin M4 (34mm)

RIH1131

11

11

Double sided screw-mounting using 2 corner pins with M4 threads in a sleeve for Ø5mm hole. 34.5

(used with M4 Double connecting sleeve for double sided connections)

Ø15 12.5

Ø5

Ø8

M4 Double Connecting Sleeve

Item No: 1144

Nylon Dowel (M6 thread)

Item No: 1140

Description

RS Code

Description

RS Code

Double Connecting Sleeve M4

RIH1129

10mm Nylon Dowel with M6 thread

RIH1124

M4

for Ø5 hole

14

M6

for Ø10 hole

11

55

6

HARDWARE 6.4 Brackets and Connectors new Hasp & Staple 75mm

Item No: 1546

new Flat Plate with Epoxy

Item No: 1388

Description

RS Code

Description

RS Code

Hasp & Staple 75mm Brass Plated

RIH1393

Flat Plate with Epoxy

RIH1286

82

new Galvanised Fixing Plate (4 Holes)

Item No: 1287

46

new Triangle Hanging Plate - Galvanised

Item No: 1288

Description

RS Code

Description

RS Code

Galvanised Fixing Plate 40 x 50 x 1.6mm

RIH1234

Triangle Hanging Plate - Galvanised

RIH1235

50

50 40

98

new Hanging Plate 62mm (3 Holes)

Item No: 1384

new Shelf Studs

Item No: 1416

Description

RS Code

Description

RS Code

Hanging Plate 62mm

RIH1285

Shelf Stud Brass Plated Shelf Stud for Brass Plated Socket

RIH1294 RIH1298

62 50

new Mounting Bracket Small

Item No: 805

Item No: 1399

Description

RS Code

Description

RS Code

Steel mounting bracket, small white

RIH1320

Mirror Corners Small STD 6mm, Nickel Plated

RIH1293

22

35

56

new Mirror Corners Small STD 6mm

30

HARDWARE

6

6.5 Hinges new Butt Hinge 50mm Brass

Item No: 1333

new Easy Fit Hinge 64mm Nickel

Item No: 1330

Description

RS Code

Description

Butt Hinge 50mm Brass Plated

RIH1275

Easy Fit Hinge 64mm - 1.2mm Matt Nickel Plated RIH1271

new Cranked Hinge Yellow Zinc

Item No: 1335

new Easy Fit Hinge 64mm Brass

RS Code

Item No: 1330

Description

RS Code

Description

Cranked Hinge Yellow Zinc

RIH1277

Easy Fit Hinge 64mm - 1.2mm Matt Brass Plated RIH1272

new Flush Hinge 50mm Yellow Zinc

Item No: 1329

new Single Cranked Hinge Yellow Zinc

RS Code

Item No: 1332

Description

RS Code

Description

Flush Hinge 50mm Yellow Zinc Plated Steel

RIH1269

Single Cranked Hinge 6mm Offset Yellow Zinc plated RIH1274

new Easy Fit Hinge 55mm Brass

Item No: 1329

new Round Backflap Hinge Brass

RS Code

Item No: 1334

Description

RS Code

Description

RS Code

Easy Fit Hinge 55mm Brass Plated Steel

RIH1270

Round backflap Brass Plated Steel

RIH1276

57

6

HARDWARE new

6.6 Office Hardware new Wire Basket Fixing Bracket

new Wire Management Basket - 1.2m

Item No: 1617

Description

Item No: 1617

Size

RS Code

Description

Fixing bracket for wire basket

86mm

RIH1436

Wire Management Basket, 1.2m (incl. 4 clips) 86

RIH1420

Fixing bracket for wire basket

130mm RIH1626

Wire Management Basket, 1.2m (incl. 4 clips) 130

RIH1625

Wire Management Basket Clips

RIH1421

3

30

96

Size

RS Code

86 30 73 130

86/130

73

118/144

new Fixing Bracket

new 140 x 140mm Plate

Item No: 1618

Description

RS Code

Fixing Bracket Office Furniture, width 40mm

Item No: 1619

Description

46

RIH1440

RS Code

140 x 140mm Fixing Plate

354

RIH1441

140

96 96

96 96

96

140

1.5

9.5

3

40

new 140 x 44mm Plate

Item No: 1620

Description

new Rectangular Screen Bullet Fixing Bracket

RS Code

140 x 44mm Fixing Plate

Item No: 1618

Description

RIH1442

RS Code

Fixing Bracket Rectangular Screen Bullet

44

70

96

RIH1439

45

3 140 3

new Screen Bracket

Item No: 1638

Description

new Rectangulat Screen Bullet

19 6.5

Description Rectangular Screen bullet Rectangular Screen bullet

RS Code

Screen Bracket

RIH1444 105 150 50

10

5 155 50

58

Item No: 1636 RS Code RIH1437 RIH1438

HARDWARE new new Bracket

6.6 Office Hardware

new Ø38 x M8 Base Leveler

Item No: 1802

Item No: 1804

Description

RS Code

Description

RS Code

Bracket

RIH1627

Ø38 x M8 base leveler

RIH1617

70

6

M8

50 15

70

9.5 Ø38

new Ø50mm Expanding Base Leveler Item No: 1806

Description

RS Code

Ø50mm Expanding base leveler

RIH1619

new Ø25 x M6 Base Leveler

Ø25 insert pressed into leveler to expand

Item No: 1805

Description

RS Code

Ø25 x M6 Base Leveler

RIH1618 M6

Ø20

15 7 Ø25 Ø35 Ø50

new Modesty Bracket

Description Modesty Bracket with fixed Modesty Bracket without

Item No: 1637

new Filing Drawer Bracket

Item No: 1803

RS Code

Description

RS Code

RIH1443 RIH1566

Filing drawer bracket, Black

RIH1620

Modesty Bracket sold with fixed or without .

96 146

110

340

3 30

110

59

6

HARDWARE 6.7 Castors new Olym Castor Black & White

new Koo Castor Grey & White

Item No: 1513

Description

Size

RS Code

75mm

RIH1324

Olym White ABS Core, Black PU Thread, with brake Weight capacity: 50kg

Item No: 1512

Description

Size

RS Code

Koo Castor Grey & White, without brake

75mm

RIH1323

Weight Capacity: 50kg

13 26

42 M10

M10

15

15

100

100

Ø75

Ø75

Koo Castor Black & White

Item No: 1514

Eva Castor Grey

Item No: 1522

Description

Size

RS Code

Description

Size

RS Code

75mm

RIH1322

75mm

RIH1321

new Koo White ABS Core, Black PU Thread,

with brake Weight capacity: 50kg

new Dark Grey ABS Core, Light Grey PU

Thread, with brake Weight Capacity: 50kg 42

42

M10

M10

15

15 100

100

Ø75

Ø75

Olym Castor Grey

Item No: 1511

Description

Size

RS Code

Description

Size

RS Code

75mm

RIH1325

Black with flat base, with brake Black with flat base, without brake Weight Capacity: 45kg

50mm 50mm

RIH1430 RIH1431

new Mini Castor

new Olym Grey ABS Core, White PU Thread,

without brake Weight Capacity: 50kg

13

Item No: 1630/1631

18

26 M10 55

15 Ø40

100

Ø75

60

25

35

25

HARDWARE

6

6.8 Nails, Rumber Nuts, Screws and Bolts new Rumber Nuts

new Director Screw

Item No: 1642

Item No: 774

Description

RS Code

Description

RS Code

Rumber Nuts M8 x 20mm

RIH1448

6 x 50mm Director Screw

RSC190

(Drill Ø11 hole) M8

20

Ø11

SW7

Ø14.5

new Rumber Nuts

new Nail in Wall Anchors

Item No: 1308

Description

RS Code

Nail in Wall Anchors 6 x 70mm Nail in Wall Anchors 6 x 55mm

RIH1263 RIH1264

Item No: 1640

Description

RS Code

Rumber Nuts M6 x 10mm

RIH1446

(Drill Ø8 hole) M6

10

Ø8

SW6

new Wall Plugs 6mm / 8mm Ø11.5

new Rumber Nuts

Item No: 1127

Description

RS Code

Wall plugs 6mm Wall plugs 8mm

RIH1116 RIH1117

Item No: 1641

Description

RS Code

Rumber Nuts M6 x 17mm

RIH1447

(Drill Ø8 hole)

new Pins & Wire Nails

M6

17

Ø8

SW6

Ø10.5

new Rumber Nuts

Item No: 1801

Description

RS Code

Rumber Nuts M10 x 25mm

RIH1621

(Drill Ø13 hole)

M10

25

Description

RS Code

Pin - 25 x 1.6mm (0.5kg) Pin - 40 x 1.6mm (0.5kg) Pin - 50 x 2mm (0.5kg)

RIH1202 RIH1203 RIH1204

Wire Nail Wire Nail Wire Nail Pin Pin Pin Wire Nail Wire Nail

-

25 x 1.6mm (0.5kg) 40 x 2mm (0.5kg) 50 x 2.5mm (0.5kg) 16 x 1.25mm (0.5kg) 20 x 1.25mm (0.5kg) 32 x 1.6mm (0.5kg) 63 x 2.8mm (0.5kg) 75 x 3.5mm (0.5kg)

RIH1205 RIH1206 RIH1207 RIH1236 RIH1237 RIH1238 RIH1239 RIH1240

Wire Nail Wire Nail Wire Nail Wire Nail

-

100 x 4mm (0.5kg) 125 x 5mm (0.5kg) 150 x 5.6mm (0.5kg) 32 x 2mm (0.5kg)

RIH1241 RIH1242 RIH1243 RIH1245

Ø13

SW10

Item No: 1432

Ø16

61

6

HARDWARE 6.9 Catches, Escutcheons and Locks 13mm Adhesive Hole Covers

Item No: 781

Description

RS Code

White 20 per sheet)

RIH834

White (2000 per box)

RIH835

Alum (20 per sheet)

RIH836

Alum (2000 per box)

RIH837

Black (20 per sheet)

RIH838

Black (2000 per box)

RIH839

Ash/Maple (20 per sheet)

RIH840

new Escutcheon No 22/23

White

Item No: 1347

Description

RS Code

Escutcheon Plate No 22 Brass

RIH1283

Escutcheon Plate No 23 Brass

RIH1284 22

Aluminium

23

Black

Ash/Maple (2000 per box)

RIH841

Oak (20 per sheet)

RIH842

Oak (2000 per box)

RIH843

Cherry (20 per sheet)

RIH844

Cherry (2000 per box)

RIH845

Mahogany (20 per sheet)

RIH846

Mahogany (2000 per box)

RIH847

Beech (20 per sheet)

RIH848

Beech (2000 per box)

RIH849

new Tan (126 per sheet)

RIH1557

new Enoco (126 per sheet)

RIH1558

new Enoco (12600 per box)

RIH1559

new Eggshell (126 per sheet)

RIH1560

new Eggshell (12600 per box)

RIH1561

62

Item No: 848

Description

RS Code

70mm Necked Flush Bolt Nickel Plated Steel

RIH715 RIH1279

new 70mm Necked Flush Bolt Brass Plated Steel

Oak

Cherry

Mahogany

Beech new

RIH1556

new Tan (12600 per box)

new Escutcheon

Ash/Maple

Necked Flush Bolt 70mm

Straight Flush Bolt 70mm Brass

Item No: 847

Description

RS Code

70mm Straight Flush Bolt Nickel Plated Steel

RIH716 RIH1278

new 70mm Straight Flush Bolt Brass Plated Steel

Tan new

Enoco new

Eggshell

Item No: 1307

Cupboard Rooster Catch

Item No: 855

Description

RS Code

Description

RS Code

Escutcheon Black Plastic Escutcheon Gold Plastic

RIH1262 RIH1261

Cupboard Rooster Catch Nickel Plated Steel

Escutcheon Brown Plastic

RIH1260

RIH712 RIH1281

new Cupboard Rooster Catch Brass Plated Steel

HARDWARE

6

6.10 Door Lifts new Stay Folding 152mm

Item No: 1326

Description

RS Code

Stay Folding 152mm Nickel Plated Steel

RIH1267

min 16

size

flap

shelf

determined by trial mounting

new Stay Fiction 250mm

Item No: 1327

Description

RS Code

Stay Friction 250mm Zinc Plated Steel

RIH1268

min 24

size

shelf

flap determined by trial mounting

new Stay Brake 300mm

Item No: 1325

Description

RS Code

Stay Brake 300mm Zinc Plated Steel

RIH1266 min 24

size

shelf

flap determined by trial mounting

63

6

HARDWARE 6.11 Full Extension Drawer Slides and Damping Systems Full Extension Ball Bearing Slide (45mm self-closing) 45kg load capacity, 45kg per pair on 450mm • APPLICATIONS: Desk drawers, storage cabinets, kitchen cabinets, etc. • FEATURES: Long slide travel. Close automatically. • LOADING CAPACITY: 45kg per pair (450mm length). 45mm Full Extension Ball Bearing Slides, Steel Thickness 1.2mm, Load Capacity 45kg per pair 450mm length (Tested to 50 000 openings)

Item No: 1248

Description

RS Code

Ball bearing slide self closing F/Ext 450mm (Black)

RIH1042

Self-closing mechanism

Ball bearing slide self closing F/Ext 500mm (Black)

RIH1043

Ball bearing slide self closing F/Ext 450mm (BRS)

RIH1044

Ball bearing slide self closing F/Ext 500mm (BRS)

RIH1045

Drilling detail for 45mm Slide 450 500

A

B

A

C

D

E

C

F

B 35

450 192 320 445 160 192 500 192 320 495 192 224

64

D F

35

12.7

E

A

TRAVEL ±3

45.6 35.6

Drawer Damping Systems (Used on standard drawers with standard drawer runners, ball bearings and metabox runners.) new Drawer Damping System

Item No: 1663

Description

RS Code

Drawer Damping System (Sold in pairs.)

RIH1228

Maximum weight: 10kg for a 450mm cabinet. For a wider cabinet use both damping systems - left and right. 46

225

14 129

30

on cabinet side board drawer upside

10.5 on cabinet side board

Technical data sheet inside packaging.

Installation for Meta Box

Installation for Ball Bearing slide

Installation for Drawer Slide 40

1

2

3

4

225

14

129

on cabinet side board

10.5 123

30 on cabinet side board

64

harn

moving innovations

HARN

7

7.1 Drawer Systems ultimate drawer solution TRIOMAX Triomax is the epitome of refined elegance, operation simplicity, superior performance and application diversity. Harn’s commitment to quality and reliability makes Triomax the ultimate partner to any cabinet. Its smooth running action and attractive design blend harmoniously with modern homes and kitchens. The new Triomax T5 drawer systems offer improved lateral stability, quieter operations and precise adjustments. Wide drawers have a tendency to skew when opening force is applied at either one end of the drawer. This is common in drawers equipped with a continuous handle. The new T5 allows for a maximum cabinet width of 1.5 meters without the aid of any external stabiliser. Installation is kept simple and cost effective. Standard load capacity of 50kg caters for most storage requirements. The super smooth sliding action offers effortless opening and closing every time regardless of the drawer’s load weight. KEY FEATURES: • Full extension / Epoxy coated finishing. • Roller bearing concealed runners. • Standard load capacity of 50kg. • Drawer lengths between 270mm to 500mm. • Steel drawer sides of 83mm and 115mm. • Side extendable to 204mm. • Sylent integrated soft-close system. • Integrated lateral stabilisers. Harn Triomax catalogues available on request or can be viewed on our website at:

www.raiel.com or www.harn.com

impressive IMPAZ IMPAZ drawers runners are popular with cabinet makers. The highly configurable drawer runner system makes it versatile and highly suitable for most requirements. The epoxy coating forms a smooth and durable finishing, making it easy to maintain and looking great for years to come. Designed to inspire with the assurance of quality and reliability, the Harn Impaz drawer system and its versatile accessories make it ideal for most applications. Configurations are only limited by one’s imagination. The installation and assembly procedures are designed to be fast, simple and precise using minimum tools. impaz is a reliable, stylish, practical and economical solution for modern kitchens, homes and offices. It will impress even the most discerning s. KEY FEATURES: • Single extension. • Load capacity of 30kg. • Drawer side heights of 85mm and 149mm. • Side extendable to 213mm. • Drawer lengths between 270mm to 500mm. • Smooth rolling mechanism. Roller runners. • Double out-stop safety feature. • Epoxy coated finishing. Harn Impaz catalogues available on request or can be viewed on our website at:

www.raiel.com or www.harn.com

reliable BASIC Basic drawer runners. KEY FEATURES: Single extension. Epoxy coated. Load capacity of 20kg. 2.5mm wheel tolerance. Self closing feature. Smooth rolling mechanism. Double out-stop safety feature. Harn Basic catalogues available on request or can be viewed on our website at:

www.raiel.com or www.harn.com

We reserve the right to change any technical specifications without prior notice.

65

8

SALICE

Proud distributor of

hinges

8.1 General Instructions We are pleased to announce our strategic alliance with the world famous Italian brand “SALICE”, whose Hinges and Smove are number one in the world, for distribution of their product in South Africa. This is a concrete move to have a better presence in the upper-end fittings market, which include the following: HINGE APPLICATIONS: • Series 800 Clip on Hinges 110° Full Overlay, Half and Inset • Series 200 Clip on Complimentary Hinges 155°, Pie Cut and 45° • Series 700 Clip On Soft Closing Hinges 110° Full Overlays, Half and Inset • Series Push Hinges for handless doors • Series 200 Glass Hinges for inset doors • Accessories for hinges cover caps, etc. LIFT OPENING SYSTEMS: • Single Flap Doors • Folding Doors • Parallel Opening Doors

KEY to Abbreviations S D T K A L H G

= = = = = = = =

Accredited by SINCERT - DAR - NACCB RAB - INMETRO

Accredited by SINCERT - DAR - NACCB RAB

“C” Value

Thickness of the cabinet side Required door overlay Door thickness Drilling distance Reveal Gap between door and carcass Height of the mounting plate Hinge constant

With this formula you can obtain the maximum thickness of the moulded door that can be opened without touching adjacent carcass sides, doors or walls, whilst bearing in mind the below L-K-T values.

C=20 + K + A

SERIES 800 Assembly Instructions with the use of Series 200 Mounting Plates 2

1

3

4

Then press lightly on the end of the arm to secure (clip on) the latch. Application with FULL OVERLAY (F/O) door

66

To remove the hinge from the mounting plate, press release clip as indicated. Application with HALF OVERLAY (H/O) door

Application with INSET door

Proud distributor of

SALICE

hinges

8

8.1 General Instructions RATIOS: HINGES in relation to DOOR WEIGHT Approx. number of hinges required according to the door dimension and weight.

HINGE CUP DRILLING

45 9.5

Height of Door (cm)

5 Ø3

K

11 9.5

SIDE (LATERAL) ADJUSTMENT Series 200 MAX VARIATION: -1.5 to +4.5mm

Width of Door (cm)

Weight of Door (N) 1N = 0.102KG

Space needed to open the door (mm)

-1.5 to +4.5mm (MAX VARIATION)

The above values are calculated on the assumption that the doors have square edges. They are reduced if the doors have rounded edges.

A specially developed technical solution allows the sideways adjustment of the door while maintaining the gap behind the door (“L” value of 0.7mm). The adjustment screw operates in conjunction with the inner leaf of the hinge arm. The door moves in only one direction: parallel to the carcass and without a gap developing between the door and the carcass.

67

8

SALICE

Proud distributor of

hinges

8.1 General Instructions MAX. ADJUSTMENTS: Series 800, 700 & 200 ● SIDE adjustment from -1,5mm to +4,5mm ● HEIGHT adjustment -2mm to +2mm ● DEPTH Series 200: adjustment from -1,5mm to +3mm Series 700 & 800: adjustment from -0,5mm to +2,8mm Series PUSH: Depth adjustment from -0,5mm to +2,8mm Please Note: Whenever adjustments are made exceeding the maximum indicators, the lifespan of the hinges are compromised.

Series 800 MAX VARIATION: -1.5 to 4.5mm

-1.5 + 4.5mm

Sideways adjustment of the door is made by using the indicated screw. It is possible to recover the gap behind the door (the initial “L” value of 0.7 mm) simply by using the assembly stop located on the underside of the hinge.

DEPTH ADJUSTMENT

HEIGHT ADJUSTMENT

Series 200

The hinge fixing screw is slackened and an oval slot on the arm of the hinge enables the door to be adjusted frontally by + 2,8 mm. Finally the fixing screw must be retightened.

Series 800

Series 200 with snap-on mounting plates

The hinge fixing screw is slackened and an oval slot on the arm of the hinge enables the door to be adjusted frontally from -1,5 mm to +3 mm. Finally the fixing screw must be retightened.

The hinge fixing screw is slackened and an oval slot on the arm of the hinge enables the door to be adjusted frontally by + 2,8 mm. Finally the fixing screw must be retightened.

NB! *If you require any application other than what we offer standard in our stock range please our head office for enquiries.

68

Proud distributor of

SALICE

hinges

8

8.2 Series 800

Series 800 110º

■ IDEAL USE: When an opening angle (up to 110°) is required ■ CUP DEPTH: 11mm ■ DRILLING DISTANCE: 3 to 6mm from edge of door ■ MOUNTING PLATES: Must be ordered seperately to the hinge

Arm 0 (Economy Clip 110° FULL OVERLAY) H= 15 + K - (D)

Description

Item No.

RS Code

Series 800 Clip-on 110° F/O Hinge use with Series 800 Trad. Mount. Plate

1151 1181

RIH1136 RIH1175

1259

RIH1214

1260

RIH1215

Description

Item No.

RS Code

Series 800 Clip-on 110° H/O Hinge use with Series 800 Trad. Mount.Plate

1152 1182

RIH1137 RIH1176

1261

RIH1216

1262

RIH1217

Series 800 Clip On 110°F/O with Ø8x10 Dowel use with Series 800 Traditional Mount. Plate with Euroscrew

Option available with Ø8x10 Dowel & Mounting plate with euroscrews

Arm 9 (Economy Clip 110° HALF OVERLAY) H= 6 + K - (D)

Series 800 Clip On 110° H/O with Ø8x10 Dowel use with Traditional Mount. Plate with Euroscrew

Option available with Ø8x10 Dowel & Mounting plate with euroscrews

Arm 17 (Economy Clip 110° INSET) H= -2 + K + A

94° Opening K = from 3 to 8 mm

Description

Item No.

RS Code

Series 800 Clip-on 110° Inset Hinge (use with Series 800 Trad. Mount. Plate)

1153 1182

RIH1138 RIH1176

1263

RIH1218

1262

RIH1217

Description

Item No.

RS Code

Series 800 Trad. Mount. Plate (F/O) Series 800 Trad. Mount. Plate (H/O & Inset) Series 800 Traditional Mount. Plate (F/O) Mount. Plate with Euroscrew Traditional Mount. Plate (H/O & Inset) with Euroscrew

1181 1182

RIH1175 RIH1176

1260

RIH1215

1262

RIH1217

Series 800 Clip On 110° Inset with Ø8x10 Dowel (use with Traditional Mount. Plate with Euroscrew)

Option available with Ø8x10 Dowel & Mounting plate with euroscrews

Series 800 Traditional Mounting Plates

Option available with with euroscrews

69

8

SALICE

Proud distributor of

hinges

8.3 Series 200

Series 200 155º Arm 0 (Series 200 Clip-on 155° FULL OVERLAY)

■ IDEAL USE: For an opening angle of up to 155° (eg. Corner Cupboards) ■ CUP DEPTH: 8mm die-cast cup ■ DRILLING DISTANCE: 3 to 8mm from edge of door (K) ■ MOUNTING PLATES: Must be ordered seperately to the hinge H= 15 + K - (D)

Description

Item No.

RS Code

Series 200 Clip-on 155° F/O Hinge use with Clip-on Mounting Plate

1148 1179

RIH1133 RIH1173

1254

RIH1209

1255

RIH1210

Series 200 Clip-on 155° F/O Hinge with Ø8x10 Dowel use with Clip-on Mounting Plate with Euroscrew

Option available with Ø8x10 Dowel & Mounting plate with euroscrews

Series 200 45º Complimentory Hinges Arm 45° (Series 200 Clip-on 45° Hinge)

■ IDEAL USE: For wooden doors with positive angled assembly (94° opening) ■ CUP DEPTH: 11mm metal cup ■ DRILLING DISTANCE: 3 to 8mm from edge of door (K) ■ MOUNTING PLATES: Must be ordered seperately to the hinge Description

Item No.

RS Code

Series 200 Clip-on 45° Hinge use with Clip-on Mounting Plate

1149 1179

RIH1134 RIH1173

1256

RIH1211

1255

RIH1210

Series 200 Clip-on 45° Hinge with Ø8x10 Dowel use with Clip-on Mounting Plate with Euroscrew

Option available with Ø8x10 Dowel & Mounting plate with euroscrews

Series 200 Pie Cut Hinges for Corner Cabinets

Sprung Hinge (Bi-fold Pie)

■ IDEAL USE: Maximum thickness of the door with square edges: 23mm ■ CUP DEPTH: 11mm die-cast cup. ■ OPENING ANGLE: for first door 70° ■ DRILLING DISTANCE: 3 to 6mm from edge of door (K) ■ MOUNTING PLATES: Must be ordered seperately to the hinge For thicker doors or doors with mouldings or radiused edges, please refer to our technical assistance. Description

Item No.

RS Code

Series 200 Clip-on Pie cut Hinge use with Clip-on Mounting Plate

1150 1180

RIH1135 RIH1174

1257

RIH1212

1258

RIH1213

Description

Item No.

RS Code

Clip-on Mounting Plate for 155° Hinge Clip-on Mounting Plate for 45° Hinge Clip-on Mounting Plate for Pie Cut Hinge

1179 1179 1180

RIH1173 RIH1173 RIH1174

1255

RIH1210

1255

RIH1210

1258

RIH1213

Series 200 Clip-on Pie Cut Hinge with Ø8x10 Dowel use with Series 200 Clip-on Mounting Plate with Euroscrew Option available with Ø8x10 Dowel & Mounting plate with euroscrews Clip-on Mounting Plate

Option available with with euroscrews

70

Clip-on Mounting Plate for 155° Hinge with Euroscrew Clip-on Mounting Plate for 45° Hinge with Euroscrew Clip-on Mounting Plate for Pie Cut Hinge with Euroscrew

Proud distributor of

SALICE

hinges

8

8.4 Series 700 - Silentia

Series 700 Silentia Soft Closing Hinges

■ IDEAL USE: New generation hinges with Integrated Soft-closing Systems ■ CUP DEPTH: 13,5mm steel. Cup Spacer must be ordered seperately ■ DRILLING DISTANCE: 3 to 6mm from edge of door (K) ■ MOUNTING PLATES: Must be ordered seperately to the hinge ■ OPENING ANGLES: 110°

Arm O (Silentia 110° FULL OVERLAY Hinge) H= 15 + K - (D)

Description

Item No.

Series 700 Silentia Clip-on 110° F/O Hinge 1154 use with Clip-on Mounting Plate 1179

RS Code RIH1139 RIH1173

Series 700 Silentia Clip-on 110° F/O Hinge with Ø8x10 Dowel use with Clip-on Mounting Plate with Euroscrew

1264

RIH1219

1255

RIH1210

Description

Item No.

RS Code

Option available with Ø8x10 Dowel & Mounting plate with euroscrews Arm 9 (Silentia 110° HALF OVERLAY Hinge)

H= 6 + K - (D)

Series 700 Silentia Clip-on 110° H/O Hinge 1155 1156 use with Clip-on Mounting Plate

RIH1140 RIH1141

Series 700 Silentia Clip-on 110° H/O Hinge with Ø8x10 Dowel use with Clip-on Mounting Plate with Euroscrew

1265

RIH1220

1266

RIH1221

Description

Item No.

RS Code

Option available with Ø8x10 Dowel & Mounting plate with euroscrews Arm 17 (Silentia 110° INSET Hinge) H= -2 + K + A

Series 700 Silentia Clip-on 110° Inset Hinge 1185 use with Clip-on Mounting Plate 1156 Series 700 Silentia Clip-on 110° Inset Hinge with Ø8x10 Dowel use with Clip-on Mounting Plate with Euroscrew

RIH1184 RIH1141

1267

RIH1222

1266

RIH1221

Description

Item No.

RS Code

Silentia Spacer with thickness of 1.2mm

1157

RIH1142

Option available with Ø8x10 Dowel & Mounting plate with euroscrews Clip-on Mounting Plate

CUP SPACER to REDUCE the CUP DEPTH

Option available with with euroscrews Description

Item No.

RS Code

Clip-on Mounting Plate for F/O Hinge Clip-on Mount.Plate for H/O & Inset Hinge Clip0on Mounting Plate for F/O Hinge with Euroscrew Clip-on Mount. Plate for H/) & Inset Hinge with Euroscrew

1154 1156

RIH1173 RIH1141

1255

RIH1210

1266

RIH1221

71

8

SALICE

Proud distributor of

hinges

8.5 Series Push

Series PUSH

The PUSH system is a self-opening system for the doors of all types of handleless furniture. It consists of a series of self-opening hinges, release devices (the PUSH) that can be fitted to the top, base or side of the cabinet and retaining catches to be fitted to the back of the door.

The PUSH release device is available in a mechanical version that is fitted to the cabinet side using screws and a magnetic version that can be surface mounted using a holder or ecessed into the edge of the cabinet. The retaining catches are pressure fixed with special pistons. For doors over 1600mm in height, we suggest that you use 2 x mechanical release catches or a single magnetic release device together with a supplementary magnetic catch.

Series PUSH Hinges & Accessories

■ IDEAL USE: Push action to open & close cupboards with minimum effort ■ CUP DEPTH: 11mm steel ■ OPENING ANGLES: 110° ■ DRILLING DISTANCE: 3 to 6mm from edge of door (K) ■ MOUNTING PLATES: Must be ordered seperately to the hinge ■ The PUSH device is available in a mechanical version & magnetic version

Arm 0 (Series 200 PUSH 110° FULL OVERLAY Hinge) Description

Item No.

RS Code

Series 200 Push Clip on 110° F/O Hinge use with Clip-on Mounting Plate

1160 1179

RIH1145 RIH1173

1268

RIH1223

1255

RIH1210

Description

Item No.

RS Code

Series 200 Push Clip on 110° H/O Hinge use with Clip-on Mounting Plate

1161 1156

RIH1146 RIH1141

1269

RIH1224

1266

RIH1221

Item No.

RS Code

Series 200 Push Clip-on 110° F/O Hinge with Ø8x10 Dowel use with Clip-on Mounting Plate with Euroscrew

Option available with Ø8x10 Dowel & Mounting plate with euroscrews Arm 17 (Series 200 PUSH 110° HALF OVERLAY Hinge) H= 6 + K - (D)

Series 200 Push Clip-on 110° H/O Hinge with Ø8x10 Dowel use with Clip-on Mounting Plate with Euroscrew Option available with Ø8x10 Dowel & Mounting plate with euroscrews Arm 17 (Series 200 PUSH 110° INSET Hinge) H= -2 + K + A

Description

Series 200 Push Clip on 110° INSET Hinge 1162 use with Clip-on Mounting Plate 1156 Series 200 Push Clip-on 110°Inset Hinge with Ø8x10 Dowel use with Clip-on Mounting Plate with Euroscrew

RIH1147 RIH1141

1270

RIH1225

1266

RIH1221

Item No.

RS Code

Option available with Ø8x10 Dowel & Mounting plate with euroscrews Clip-on Mounting Plate Description

Option available with with euroscrews

72

Clip-on Mounting Plate for F/O Hinge 1179 Clip-on Mount. Plate for H/O & Inset Hinge 1156 Clip-on Mounting Plate for F/O Hinge with Euroscrew 1255 Clip-on Mounting Plate for H/O & Inset Hinge with Euroscrew 1266

RIH1173 RIH1141 RIH1210 RIH1221

Proud distributor of

SALICE

hinges

8

8.5. Series Push Mechanical Release Device with Adjustment

Retaining catches for wooden door

Magnetic release Device for Doors <1600mm

Supplementary Magnetic Release Device for Doors >1600mm

Optional adapter if magnetic release device if not recessed in the side of the cabinet

Description

Item No.

RS Code

Mechanical Release Device with adjustment

1163

RIH1148

Description

Item No.

RS Code

Retaining catches for wooden door

1164

RIH1149

Description

Item No.

RS Code

Magnetic Release Device for Doors

1165

RIH1150

Description

Item No.

RS Code

Supplementary Magnetic catch for Doors over 1600mm

1166

RIH1151

Description

Item No.

RS Code

Adjustable plastic adapter for release device

1167

RIH1152

73

8

SALICE

Proud distributor of

hinges

8.5. Series Push APPLICATION of the Mechanical Release Device and the Magnetic Release devise APPLICATION of the Mechanical Release Device

The adjustable PUSH system consists of a release device and a screw fixed adapter, which has been developed to improve the action of the system. ADJUSTABILITY: -1mm to +2.5mm (controlled by a small adjuster wheel located at the back) Sideways adjustability: -2mm to +2mm (this can by done by loosening the 2 fixing screws & adjusting along the elongated holes before retightening)

8.5 2.5

Y

35

APPLICATION of the Release Device to be recessed Drill a hole Ø10mm and min. 40mm depth in the top, the side or the base of the cabinet. Insert the release device into the hole.

APPLICATION of the Release Device Application Release the device into the adapter. Place the adapter to the top, the side or base of the cabinet, using the drilling value of 37x32mm for final positioning.

ø 10 26 Min

S

40 min

37

2.5

2.5

T 32 RETAINING CATCH to be inserted Apply the retaining catch to the Magnetic release device. Close the door. The sharp point of the retaining catch will mark where to insert it.

74

5

10 Min

Proud distributor of

SALICE

hinges

8

8.6 Series 200 for Glass Doors

Series 200 complimentary hinges for

Glass Doors 94º

■ IDEAL USE: Cabinet doors of GLASS or PERSPEX 4 to 6mm thick ■ HOLE DIAMETRE: 26mm ■ OPENING ANGLES: 94° ■ DRILLING DISTANCE: 5.5 to 6.5mm from edge of door (K) ■ MOUNTING PLATES: Must be ordered seperately to the hinge ■ COVER CAPS: Must be ordered seperately to the hinge.

Arm 17 (Series 200 GLASS Clip-on 94º INSET Hinge)

H= - 4,5 + K + A

Description

Item No.

RS Code

Series 200 GLASS Clip-on 94º INSET Hinge 1158 use with Clip-on Mounting Plate 1156 use with Clip-on Mounting Plate with Euroscrew 1266

RIH1143 RIH1141 RIH1221

Description

Item No.

RS Code

Clip-on Mounting Plate Clip-on Mounting Plate with Euroscrew

1156 1266

RIH1141 RIH1221

Clip-On Mounting Plate

Option available with with euroscrews

Cover Caps Description

Item No.

RS Code

COVER CAPS for Glass Hinges BLACK COVER CAPS for Glass Hinges SILVER

1159 1159

RIH1177 RIH1144

75

8

SALICE

Proud distributor of

hinges

8.7 Lift Systems - Single Flap Doors

Single Flap Door The Push self opening system could be used for doors up to 400mm in height. The door can be opened with or without a handle.

General Information: The Gas Piston Strength on the arm is determined in relationship with the dimensions & weight of the doors, which will also determine if one or two arms are neccessary. Their are also two types of pistons available in the various strengths which determines how you want the action of the door to open, which are the following: ■ Standard Piston This piston is for a single operation door, when the door is opened, it opens fully to the top, which the arm is able to be adjusted Min70°- Max90° ■ Progressive Piston This piston is a for a progressive opening door, when you open the door you open and close the door to the angle which you open the door.

The Door can be opened with or without a handle. If a handle is used it can be positioned anywhere on the door. Alternatively, for doors up to 400mm in height that are not fitted with a handle for aesthetic reasons, the push self-opening system can be used.

177

32.5

230

Correspond Piston strengths available in the stock program to determine the amount of arms needed as well as piston strength required on the graphs, a calculation is CD available on request.

Minimum Space Required

76

Proud distributor of

SALICE

hinges

8

8.7 Lift Systems - Single Flap Doors Single Flap Door Left Arm

Description

Item No.

RS Code

Single Flap Door Left Arm Single Flap Door Right Arm (ordered with mounting plate for Door) (for the arm)

1168 1168 1174

RIH1153 RIH1154 RIH1167

Description

Item No.

RS Code

Series 200 Clip on 110° F/O Hinge (use with Clip-on Mounting Plate) Series 200 Clip on 110° F/O Hinge with Ø8x10 Dowel

1147 1178 1253

RIH1132 RIH1172 RIH1208

Single Flap Door Right Arm

Series 200 110° FULL OVERLAY Hinge

Available in Push System as well.

Mounting Plates (Slim shape)

Smove for arms for doors up to 6kg in weight or up to 360mm in height

Smove for arms for doors over 6kg in weight or over 360mm in height

Description

Item No. RS Code

Clip-on Mounting Plate Clip-on Mounting Plate for Door

1178 1174

Description

Item No. RS Code

Smove for arms for doors up to 6kg in weight or up to 360mm in height

1173

Description

Item No. RS Code

Smove for arms for doors over 6kg in weight or over 360mm in height

1173

Description

Item No. RS Code

Smove Push for flap doors

1570

RIH1172 RIH1167

RIH1165

RIH1166

RIH1415

Smove for doors if Push Opening system used

77

8

SALICE

Proud distributor of

hinges

8.7 Lift Systems - Single Flap Doors GAS PISTON

Description

Item No. RS Code

Gas Piston Standard Gas Piston Standard Gas Piston Standard Gas Piston Standard

200N 350N 450N 500N

1171 1171 1171 1171

RIH1158 RIH1159 RIH1160 RIH1161

Choosing the correct GAS PISTON for CABINET WIDTHS 600, 900 & 1200 (mm) SINGLE-OPERATION doors using ONE PISTON (1 arm only) The diagram below defines the exact strength (Newton "N") of the piston to be used in relationship with the dimensions and weight of the door. It is suggested that some assembly trials are made. Our technical Assistance Service is at your disposal for any additional information. kg

kg

N

9

kg

N

9

9

8

8

kg

N

SINGLE-OPERATION doors using TWO PISTONS (arm on each side) This diagram

N

9 450

8

350

7

7

7

7

350

350

350

6

6

6

6

5

5

5

5

4

4

200

4

200

3

3

4

200

2

2

DOOR HEIGHT 330mm

200

3

3

2

2

DOOR HEIGHT 300mm

450

8

DOOR HEIGHT 360mm

DOOR HEIGHT 390mm

defines the exact strength (Newton "N") of the pistons to be used in relationship with the dimensions and weight of the door. It is suggested that some assembly trials are made. Our technical Assistance Service is at your disposal for any additional information.

18

kg

N

18

17 16

16

15

15

14

14

13

500

13

12

450

12

11

11

10

10

9

8

7

7

450

350

6

6

4

500

9

350

8

5

N

kg

17

5

200

200

4 3

3

DOOR HEIGHT 540mm

DOOR HEIGHT 600mm

GAS PISTON Description

Item No. RS Code

Gas Piston Progressive 150N Gas Piston Progressive 250N Gas Piston Progressive 450N

1172 1172 1172

RIH1162 RIH1163 RIH1164

DH = Door Height 600mm Cabinet Width 900mm Cabinet Width 1200mm Cabinet Width PROGRESSIVE-OPERATION doors using ONE PISTON (1 arm only) The diagram below defines the exact strength (Newton "N") of the piston to be used in relationship with the dimensions and weight of the door. It is suggested that some assembly trials are made. Our technical Assistance Service is at your disposal for any additional information.

18

kg

N

16

16 15

14

13 12

11

11

10

10 250

8

15.2

13.4

N

18

10.4

9

250

6

N

18

kg

N

18

16

16

16

16

15

15

15

14 13

13

13

12

12

12

11

11

11

11

10

10

10

10

9

9

8

8

250

250

8

7 6

9

7

7 150

6

150

450

7

5

5

5

5

250

5

4

4

4

4

4

150

4

DH 300mm

3

DH 330mm

3

DH 360mm

3

DH 390mm

3

DH 540mm

3

doors

using TWO PISTONS (arm on each side) This diagram defines the exact

450

6

6

5 3

PROGRESSIVE-OPERATION

N

14

14

14 13

9

kg

17

17

15

8 150

kg

17

12

7 150

kg

17

8

7

78

18

14

13 12

6

N

17

15

9

kg

18

17

250 150

DH 600mm

18

kg

N

18

16 15

450

16

14

14 13

13

12

12

used in relationship with the dimensions

10

250

450

11 10

and weight of the door. It is suggested

9

that some assembly trials are made. Our

7

7

6

6

technical Assistance Service is at your

5

5

disposal for any additional information.

3

8

N

15

strength (Newton "N") of the pistons to be

11

kg

17

17

250

9 150

8

150

4

4

DH 540mm

3

DH 600mm

Proud distributor of

SALICE

hinges

8

8.7 Lift Systems - Single Flap Doors

Single Flap Door Installation Fixing the to the cabinet side - a template is provided for easy drilling

Deploying the piston

Drilling pattern for the door

3

1

2

1)

Fitting lift to the door

176.5

Fitting hinge to the door

D ø 35 K=4

Internal cabinet side

4

5

12.8 D

Adjusting the opening angle of

6 Installing the Cover

the door

32

Installing the Smove

7 DISASSEMBLY

A) Press the clip of the mounting plate B) Then press firmly at this point

A B 8

9

79

8

SALICE

Proud distributor of

hinges

8.8 Lift Systems - Folding Door

Folding Door Double Flap

General Information: The Gas Piston Strength on the arm is determined in relationship with the dimensions & weight of the doors. For a wall cabinet width 600mm, it is possible to use one system only left or right arm. Their are also two types of pistons available in the various strengths which determines how you want the action of the door to open, which are the following:

33

250

103

175

10 min.

L

■ Progressive Piston This piston is a for a progressive opening door, when you open the door you open and close the door to the angle which you open the door.

Z

■ Standard Piston This piston is for a single operation door, when the door is opened, it opens fully to the top.

Correspond Piston strengths available in the stock program to determine the amount of arms needed as well as piston strength required on the graphs, a calculation CD is available on request.

40

80

Proud distributor of

SALICE

hinges

8

8.8 Lift Systems - Folding Door Description

Item No.

RS Code

Folding Door Left Arm Folding Door Right Arm (ordered with mounting plate for Door) (for the arm)

1168 1168 1174

RIH1155 RIH1156 RIH1167

Description

Item No.

RS Code

Series 200 Clip-on 110° F/O Hinge (use with Clip-on Mounting Plate) Series 200 Clip-on 110° F/O Hinge with Ø8x10 Dowel

1147 1178 1253

RIH1132 RIH1172 RIH1208

Series 200 Clip on 110° FULL OVERLAY Hinge

Mounting Plates (Slim shape)

Smove for arms for doors up to 6kg in weight or up to 360mm in height

CENTRAL HINGE

Smove for arms for doors over 6kg in weight or over 360mm in height

Description

Item No. RS Code

Clip-on Mounting Plate Clip-on Mounting Plate for Door

1178 1174

RIH1172 RIH1167

Description

Item No. RS Code

Smove for arms for doors up to 6kg in weight or up to 360mm in height

1173

Description

Item No. RS Code

Smove for arms for doors over 6kg in weight or over 360mm in height

1173

Description

Item No. RS Code

Central Hinge for Folding Door

1170

RIH1165

RIH1166

RIH1157

81

8

SALICE

Proud distributor of

hinges

8.8 Lift Systems - Folding Door Description

GAS PISTON

Gas Piston Standard Gas Piston Standard Gas Piston Standard Gas Piston Standard

Item No. RS Code 200N 350N 450N 500N

1171 1171 1171 1171

RIH1158 RIH1159 RIH1160 RIH1161

Gas Piston Progressive 150N Gas Piston Progressive 250N Gas Piston Progressive 450N

1172 1172 1172

RIH1162 RIH1163 RIH1164

SINGLE-OPERATION doors using ONE PISTON (one arm only, left or right, for 600mm width) SINGLE-OPERATION doors using TWO PISTONS (two arms for 900mm & 1200mm widths) The diagram below defines the exact strength (Newton "N") of the piston to be used in relation to the dimensions and weight of the door. It is suggested that some assembly trials are made. Our technical Assistance Service is at your disposal for any additional information. 16

kg

N 16

kg

N

16

kg

N

16

15

15

15

15

14

14

14

14

13

13

13

13

12

12

12

12

11

11

11

10

10

11

500

10

450

9 8 7

350

6

500

10 9

450

8

8

7

7 350

6 200

5

4

3

3

500 450

6

350

200

4

200

3

DH 660mm Combined

9

N

500

8

450

7 6

350

5

5

5

4

DH 600mm Combined

9

kg

DH 720mm Combined

4

200

3

DH 780mm Combined

PROGRESSIVE-OPERATION doors using ONE PISTON (one arm only, left or right, for 600mm width) PROGRESSIVE-OPERATION doors using TWO PISTONS (two arms for 900mm & 1200mm widths) The PROGRESSIVE-OPERATION is an action that stops where the releases the handle and does not open further in a single-action. The diagram below defines the exact strength (Newton "N") of the piston/s to be used in relation to the dimensions and weight of the doors. It is suggested that some assembly trials are made. Our technical Assistance Service is at your disposal for any additional information. 16

kg

N 16

N

kg

N

16

16 15

15

15

15

14

14

14

14

13

13

12

12

13

13 12

450

12

450

11

11

11

450

10

10

10

9

9

9

9

8

8

8

250

7

7 6

150

5

4 3

4 3

7 6

6

5

DH 600mm Combined

250

150

DH 660mm Combined

250

N

450

7 6

250

5

5 4

kg

11 10

8

82

kg

150

3

DH 720mm Combined

4 3

150

DH 780mm Combined

Proud distributor of

SALICE

hinges

8

8.8 Lift Systems - Folding Door

Folding Door Installation Fix the to the cabinet side

2

1

3

FITTING THE DOORS TO THE CABINET ø 35 K=4

11 21 32

1 Upper door

6

Lower door

K=4 ø 35

4

7 1 INSTALLING THE COVER

192.5*

Ø 35

K=4

11

5 D

32

12.8

8

83

8

SALICE

Proud distributor of

hinges

8.9 Lift Systems - Parallel Opening System

Parallel Opening System for doors 440 to 660mm in height General Information: The Gas Piston Strength on the arm is determined in relationship with the dimensions & weight of the doors. Their are also two types of pistons available in the various strengths which determines how you want the action of the door to open, which are the following: ■ Standard Piston This piston is for a single operation door, when the door is opened, it opens fully to the top. ■ Progressive Piston This piston is a for a progressive opening door, when you open the door you open and close the door to the angle which you open the door.

Description

Item No.

RS Code

Lifting Sytem Left Arm Lifting System Right Arm (ordered with mounting plate for Door) (for the arm)

1824 1824 1174

RIH1824 RIH1825 RIH1167

Description

Item No. RS Code

Stabilising Bar sold in 3m lengths

1825

RIH1826

Cut to size depending on your cabinet internal width, formula = Internal cabinet width -105mm

Ends & Sleeves sold seperately

Smove for arms for doors up to 6kg in weight

84

Smove for arms for doors over 6kg in weight

Description

Item No. RS Code

Stabilising Bar Ends inc. sleeve ( sold in pairs )

1826

Description

Item No. RS Code

Smove for arms for doors up to 6kg in weight

1173

Description

Item No. RS Code

Smove for arms for doors over 6kg in weight

1173

RIH1827

RIH1165

RIH1166

Proud distributor of

SALICE

hinges

8

8.9 Lift Systems - Parallel Opening System Description

GAS PISTON

Item No. RS Code

Gas Piston Standard Gas Piston Standard Gas Piston Standard Gas Piston Standard

200N 350N 450N 500N

1171 1171 1171 1171

RIH1158 RIH1159 RIH1160 RIH1161

Chart for standard pistons with single-operation door opening. For doors from 440 to 660 mm height. Chart to define the exact strength of the pistons to be used in relationship with the dimensions and weight of the doors. Standard pistons are used when the door is required to open fully in a single operation.

Door weight (Kg) 2

3

4

5

6

7

8

9

10

11

12

13

14

2

15

6

7

8

9

10

11

12

13

14

15

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

900

5 0.8 0.6 0.4 0.2

600

900

4

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

600

1200

1200 200

Piston strength (N)

250

300

350 400

450

500 550

Piston strength (N)

600

550

600

650

2

15

3

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

600

600

900

900

4

5

6

7

8

9

10

11

12

13

14

15

0.8 0.6 0.4 0.2

14

0.8 0.6 0.4 0.2

13

0.8 0.6 0.4 0.2

12

0.8 0.6 0.4 0.2

11

0.8 0.6 0.4 0.2

10

0.8 0.6 0.4 0.2

9

0.8 0.6 0.4 0.2

8

0.8 0.6 0.4 0.2

7

0.8 0.6 0.4 0.2

6

0.8 0.6 0.4 0.2

5

0.8 0.6 0.4 0.2

4

0.8 0.6 0.4 0.2

3

0.8 0.6 0.4 0.2

2

250 300 350 400 450 500

Door height 600 mm

Door height 480 mm

1200

1200 Piston strength (N)

3

250 300 350 400 450 500

550

600

Piston strength (N)

650

250 300 350 400 450 500 550

600

650

Door height 660 mm

Door height 540 mm

GAS PISTON Description

Item No. RS Code

Gas Piston Progressive 150N Gas Piston Progressive 250N Gas Piston Progressive 450N

1172 1172 1172

RIH1162 RIH1163 RIH1164

Chart for progressive pistons with a progressive-operation door opening. For doors from 440 to 660 mm height. Chart to define the exact strength of the pistons to be used in relationship with the dimensions and weight of the doors. Progressive pistons operate progressively and allow the door to stop at any position in the opening cycle.

Door weight (Kg) 2

3

4

5

6

7

8

9

10

11

12

13

14

15

2

4

5

6

7

8

9

10

11

12

13

14

15

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

600

600 900

900

1200

1200

Piston strength (N)

150

250

350

450

Piston strength (N)

500

2

3

4

5

6

250

350

450

550

650

Door height 600 mm

Door height 480 mm 7

8

9

10

11

12

13

14

15

2

3

4

5

6

7

8

9

10

11

12

13

14

15

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

0.8 0.6 0.4 0.2

600

600 900

900

1200

1200

Piston strength (N)

3

250

Door height 540 mm

350

450

550

600

Piston strength (N)

450

550

600

Door height 660 mm

85

8

SALICE

Proud distributor of

hinges

8.9 Lift Systems - Parallel Opening System Dimensions of the system 32.5

149

36

175

440

375

380 min

200

45 min

Fixing the to the cabinet side D = Overlay Internal cabinet side

96

32 18.5 D

NB! Full instructions available at www.raiel.com or on request

86

32

Additional fix ing to be executed after adjustments

96

Hole for additional woodscrew for retaining lever

122

335

26

D

12 32

Proud distributor of

SALICE

hinges

8

8.10 Accessories COVER CAP Description

Item No.

RS Code

Series 200 Screw COVER CAP Series 800 Screw COVER CAP

1175 1175

RIH1168 RIH1169

Description

Item No.

RS Code

COVER CAP

1176

RIH1170

Description

Item No.

RS Code

SMOVE 6SNG

1177

RIH1171

Steel COVER CAP

SMOVE 6SNG

Insert Smove D006 at the centre of the top or the base of the cabinet. For wood-based and alu-framed doors over 1600 mm height, it may be necessary to use two Smove, one to be inserted into the top and the second into the base of the cabinet. Ø10 x 50mm Hole

NB! *If you require any application other than what we offer standard in our stock range please our head office for enquiries.

87

9

MAPS 9.1 Raiël Maps

Maitland (Cape Town)

Malmesbury (Head Office) 5 Municipality Street, Malmesbury 7300 • tel: 022 482 7400 • fax: 022 482 1496 • email: [email protected] GPS: 33° 27’ 54.76”S • 18° 34’ 12.72”E

1 2 3 4

60 Coronation Avenue, Corner Koeberg Road, Maitland • Tel: 021 510 2798 • Fax: 021 510 5839 GPS: 33° 55’ 21.78”S • 18° 25’ 50.91”E

Raiël Head Office Raiël Wood Alumi Jack Doors

4

Stikland (Bellville)

Port Elizabeth

7A Cecil Morgan Way, Off La Belle Road, Stikland • tel: 021 944 5900 • fax: 021 944 5907 GPS: 33° 547’ 05.64”S • 18° 43’ 13.97”E

Milenium Street, Northend, Port Elizabeth • tel: 041 487 0507 • fax: 041 487 0318

R7

5

Kramerville (Johannesburg)

Durban

Unit 3, 17 Kramer Road, Kramerville • tel: 011 262 2516 • fax: 011 262 3459 GPS: 26° 05’ 20.91”S • 28° 05’ 05.97”E

Unit 3, Marseilles Park, Marseilles Crescent, Briardene • tel: 031 560 0900 • fax: 031 560 0901

M1

SOUTH ROAD

ARCHIMEDES ST

MER

KRA

D

ROA

RAAF M OTORWA Y

T ND S DESMO

APPEL ROAD

MARLBO

D E VIL

IE R S G

RO DRIV E

M1

88

M60

Malmesbury|Head Office 5 Municipality Street Malmesbury 7300 South Africa tel: +27(0)22 482 7400 fax: +27(0)22 482 1496

Maitland (Cape Town)

Stikland (Bellville)

60 Coronation Ave Cnr Koeberg Road, Maitland South Africa tel: +27(0)21 510 2798 fax: +27(0)21 510 5839

7A Cecil Morgan Way Off La Belle Road, Stikland South Africa tel: +27(0)21 944 5900 fax: +27(0)21 944 5907

Port Elizabeth

Durban

Johannesburg

Milenium Street, North End Port Elizabeth 6001 South Africa tel: +27(0)41 487 0507 fax: +27(0)41 487 0318

Unit 3, Marseilles Park Marseilles Cres, Briardene South Africa tel: +27(0)31 560 0900 fax: +27(0)31 560 0901

Unit 3, 17 Kramer Road Kramerville South Africa tel: +27(0)11 262 2516 fax: +27(0)11 262 3459

www • r a iel.c o m decorative hardware | mouldings | surfaces | organisers | accessories