Install Coovachilli On Ubuntu 14.04(1) 582m7
This document was ed by and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this report form. Report r6l17
Overview 4q3b3c
& View Install Coovachilli On Ubuntu 14.04(1) as PDF for free.
More details 26j3b
- Words: 1,137
- Pages: 5
2017/05/19 01:33
1/5
Install CoovaChilli on Ubuntu 14.04
Install CoovaChilli on Ubuntu 14.04 Introduction RADIUSdesk can function perfectly without CoovaChilli. CoovaChilli is however the best open source captive portal software around. If you want to install CoovaChilli on a machine; make sure that there are at least two functional network cards present. One network card will be used by CoovaChilli as the Internet connection. The second network card will be used to run a captive portal on. This captive portal will be controlled by CoovaChilli who in turn receives it's instructions from FreeRADIUS (RADIUSdesk)
Installing CoovaChilli If you have a 32 bit machine the install of CoovaChilli will be a bit easier compared with the actions to install it on a 64 bit machine. They are however both easy to follow.
32 Bit Machines We will assume that we are installing CoovaChilli on the same machine running RADIUSdesk. You are not required though to run them on the same machine. We also assume that the machine has an Internet connection on eth0 while eth1 will be used to run the captive portal on. Grab the latest binary build of CoovaChilli from this page. http://coova.org/CoovaChilli/Binaries As of this writing it is 1.3.0 Install it on the machine with the two network cards running RADIUSdesk sudo dpkg --install coova-chilli_1.3.0_i386.deb From the output of the dpkg command you will see that CoovaChilli is by default disabled. In the next section we will configure it to become a working entity.
64 bit Machines We have to compile the 64 bit package from source. the latest version of the source here: http://coova.org/ As of this writing it is at 1.3.0. Install the build tools, build and install the package sudo apt-get install build-essential linux-headers-server libssl-dev sudo apt install devscripts debhelper tar -xzvf zxvf coova-chilli-1.3.0.tar.gz cd coova-chilli-1.3.0/ debuild -i -us -uc -b cd .. RADIUSdesk - http://radiusdesk.com/docuwiki/
Last update: 2016/10/20 getting_started:install_ubuntu_coovachilli http://radiusdesk.com/docuwiki/getting_started/install_ubuntu_coovachilli 14:07
sudo dpkg --install coova-chilli_1.3.0_amd64.deb From the output of the dpkg command you will see that CoovaChilli is by default disabled. In the next section we will configure it to become a working entity.
Configuring CoovaChilli Enable CoovaChilli Edit the following file sudo vi /etc/default/chilli Change it to look like this START_CHILLI=1 CONFFILE="/etc/chilli.conf" HS_="chilli" Save the file and start CoovaChilli sudo /etc/init.d/chilli start Make sure there is a tun interface present when you look at the of the ifconfig command. ifconfig ..... tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.1.0.1 P-t-P:10.1.0.1 Mask:255.255.255.0 UP POINTOPOINT RUNNING MTU:1500 Metric:1 RX packets: errors: dropped: overruns: frame: TX packets: errors: dropped: overruns: carrier: collisions: txqueuelen:100 RX bytes: (0.0 B) TX bytes: (0.0 B) ......
Modify the configuration file CoovaChilli is configured by editing or creating certail files unser the /etc/chilli directory. File config default
Comment start as a copy of default and is edited to override specific variables defined in default To avoid the splash screen we have to remove one line from this file
http://radiusdesk.com/docuwiki/
Printed on 2017/05/19 01:33
2017/05/19 01:33
3/5
Install CoovaChilli on Ubuntu 14.04
File Comment ipup.sh Custom firewall rules for start-up ipdown.sh Custom firewall rule clean-up during shut-down. Use the following /etc/chilli/config file as a guideline to configure CoovaChilli HS_LANIF=eth1 # Subscriber Interface for client devices HS_NETWORK=10.1.0.0 # HotSpot Network (must include HS_UAMLISTEN) HS_NETMASK=255.255.0.0 # HotSpot Network Netmask HS_UAMLISTEN=10.1.0.1 # HotSpot IP Address (on subscriber network) HS_UAMPORT=3990 # HotSpot UAM Port (on subscriber network) HS_UAMUIPORT=4990 # HotSpot UAM "UI" Port (on subscriber network, for embedded portal) HS_NASID=localhost HS_RADIUS=localhost HS_RADIUS2=localhost HS_RADSECRET=testing123 # Set to be your RADIUS shared secret HS_UAMSECRET=greatsecret # Set to be your UAM secret HS_UAMALIASNAME=chilli HS_SSID="Struisbaai" HS_NASIP=127.0.0.1 # To explicitly set NAS-IP-Address HS_UAMSERVER=$HS_UAMLISTEN HS_UAMFORMAT=http://\$HS_UAMLISTEN/cake2/rd_cake/dynamic_details/chilli_brow ser_detect/ HS_MACAUTH=on # To turn on MAC Authentication HS_T_PORTS="80 23 8000" HS_MODE=hotspot HS_TYPE=chillispot HS_WWWDIR=/etc/chilli/www HS_WWWBIN=/etc/chilli/wwwsh HS_PROVIDER=Coova HS_PROVIDER_LINK=http://www.coova.org/ HS_LOC_NAME="My HotSpot" # WISPr Location Name and used in portal HS_COAPORT=3799 Comment the following line out of /etc/chilli/default. # Same principal goes for HS_UAMHOMEPAGE. #HS_UAMHOMEPAGE=http://\$HS_UAMLISTEN:\$HS_UAMPORT/www/coova.html Also comment the DNS server settings out in /etc/chilli/default to force CoovaChilli to use the DNS servers of the system that it is running on. # OpenDNS Servers #HS_DNS1=208.67.222.222 #HS_DNS2=208.67.220.220 Use the following /etc/chilli/ipup.sh file as a guideline UAM server specified as 10.1.0.1 iptables -I INPUT -i tun0 -p t -m t --dport 80 --dst 10.1.0.1 -j ACCEPT iptables -I INPUT -i tun0 -p t -m t --dport 443 --dst 10.1.0.1 -j ACCEPT RADIUSdesk - http://radiusdesk.com/docuwiki/
Last update: 2016/10/20 getting_started:install_ubuntu_coovachilli http://radiusdesk.com/docuwiki/getting_started/install_ubuntu_coovachilli 14:07
iptables -I INPUT -i tun0 -p t -m t --dport 22 --dst 10.1.0.1 -j ACCEPT iptables -I INPUT -i tun0 -p t -m t --dport 8000 --dst 10.1.0.1 -j ACCEPT Use the following /etc/chilli/ipdown.sh file as a guideline UAM server specified iptables -D INPUT -i iptables -D INPUT -i iptables -D INPUT -i iptables -D INPUT -i ACCEPT
as 10.1.0.1 tun0 -p t tun0 -p t tun0 -p t tun0 -p t
-m -m -m -m
t t t t
--dport --dport --dport --dport
80 --dst 10.1.0.1 -j ACCEPT 443 --dst 10.1.0.1 -j ACCEPT 22 --dst 10.1.0.1 -j ACCEPT 8000 --dst 10.1.0.1 -j
Add NAT By default CoovaChilli does not do NAT between the two interfaces. We have to add NAT during start-up in order to have a working system.
Failing to do this step will leave you with a broken system.
Edit the /etc/init.d/chilli file and add the following: test ${HS_TERVAL:-0} -gt && { (crontab -l 2>&- | grep -v $0 echo "*/$HS_TERVAL * * * * $0 radconfig" ) | crontab - 2>&} #NAT mod iptables -F POSTROUTING -t nat iptables -I POSTROUTING -t nat -o $HS_WANIF -j MASQUERADE #END NAT mod ifconfig $HS_LANIF 0.0.0.0
Test it out Restart CoovaChilli for the latest changes to be effected. sudo /etc/init.d/chilli stop sudo /etc/init.d/chilli start Confirm it started fine sudo tail /var/log/messages http://radiusdesk.com/docuwiki/
Printed on 2017/05/19 01:33
2017/05/19 01:33
5/5
Install CoovaChilli on Ubuntu 14.04
....... May 23 13:17:01 RADIUSdesk-Beta1-1 CRON[2427]: (root) CMD ( cd / && runparts --report /etc/cron.hourly) May 23 13:18:28 RADIUSdesk-Beta1-1 coova-chilli[2109]: chilli.c: 5511: DH Released MAC=08-00-27-90-61-AE IP=10.1.0.2 May 23 13:20:48 RADIUSdesk-Beta1-1 crontab[2444]: (root) LIST (root) May 23 13:20:48 RADIUSdesk-Beta1-1 crontab[2446]: (root) REPLACE (root) May 23 13:20:48 RADIUSdesk-Beta1-1 coova-chilli[2109]: chilli.c: 7544: CoovaChilli shutting down May 23 13:20:48 RADIUSdesk-Beta1-1 coova-chilli[2448]: main-script.c: 94: Running /etc/chilli/down.sh (107/) May 23 13:20:51 RADIUSdesk-Beta1-1 coova-chilli[2561]: CoovaChilli(ChilliSpot) 1.3.0. Copyright 2002-2005 Mondru AB. Licensed under GPL. Copyright 2006-2012 David Bird (Coova Technologies) <[email protected]>. Licensed under GPL. See http://www.coova.org/ for details. May 23 13:20:51 RADIUSdesk-Beta1-1 coova-chilli[2561]: tun.c: 605: TX queue length set to 100 May 23 13:20:51 RADIUSdesk-Beta1-1 coova-chilli[2563]: main-script.c: 94: Running /etc/chilli/up.sh (/) May 23 13:21:01 RADIUSdesk-Beta1-1 cron[809]: (root) RELOAD (crontabs/root) .......
Making things permanent Ensure that CoovaChilli will start up after reboots. sudo update-rc.d chilli start 99 2 3 4 5 . stop 20
1 6 .
Reboot the system and make sure CoovaChilli started up fine
From: http://radiusdesk.com/docuwiki/ - RADIUSdesk Permanent link: http://radiusdesk.com/docuwiki/getting_started/install_ubuntu_coovachilli Last update: 2016/10/20 14:07
RADIUSdesk - http://radiusdesk.com/docuwiki/
1/5
Install CoovaChilli on Ubuntu 14.04
Install CoovaChilli on Ubuntu 14.04 Introduction RADIUSdesk can function perfectly without CoovaChilli. CoovaChilli is however the best open source captive portal software around. If you want to install CoovaChilli on a machine; make sure that there are at least two functional network cards present. One network card will be used by CoovaChilli as the Internet connection. The second network card will be used to run a captive portal on. This captive portal will be controlled by CoovaChilli who in turn receives it's instructions from FreeRADIUS (RADIUSdesk)
Installing CoovaChilli If you have a 32 bit machine the install of CoovaChilli will be a bit easier compared with the actions to install it on a 64 bit machine. They are however both easy to follow.
32 Bit Machines We will assume that we are installing CoovaChilli on the same machine running RADIUSdesk. You are not required though to run them on the same machine. We also assume that the machine has an Internet connection on eth0 while eth1 will be used to run the captive portal on. Grab the latest binary build of CoovaChilli from this page. http://coova.org/CoovaChilli/Binaries As of this writing it is 1.3.0 Install it on the machine with the two network cards running RADIUSdesk sudo dpkg --install coova-chilli_1.3.0_i386.deb From the output of the dpkg command you will see that CoovaChilli is by default disabled. In the next section we will configure it to become a working entity.
64 bit Machines We have to compile the 64 bit package from source. the latest version of the source here: http://coova.org/ As of this writing it is at 1.3.0. Install the build tools, build and install the package sudo apt-get install build-essential linux-headers-server libssl-dev sudo apt install devscripts debhelper tar -xzvf zxvf coova-chilli-1.3.0.tar.gz cd coova-chilli-1.3.0/ debuild -i -us -uc -b cd .. RADIUSdesk - http://radiusdesk.com/docuwiki/
Last update: 2016/10/20 getting_started:install_ubuntu_coovachilli http://radiusdesk.com/docuwiki/getting_started/install_ubuntu_coovachilli 14:07
sudo dpkg --install coova-chilli_1.3.0_amd64.deb From the output of the dpkg command you will see that CoovaChilli is by default disabled. In the next section we will configure it to become a working entity.
Configuring CoovaChilli Enable CoovaChilli Edit the following file sudo vi /etc/default/chilli Change it to look like this START_CHILLI=1 CONFFILE="/etc/chilli.conf" HS_="chilli" Save the file and start CoovaChilli sudo /etc/init.d/chilli start Make sure there is a tun interface present when you look at the of the ifconfig command. ifconfig ..... tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.1.0.1 P-t-P:10.1.0.1 Mask:255.255.255.0 UP POINTOPOINT RUNNING MTU:1500 Metric:1 RX packets: errors: dropped: overruns: frame: TX packets: errors: dropped: overruns: carrier: collisions: txqueuelen:100 RX bytes: (0.0 B) TX bytes: (0.0 B) ......
Modify the configuration file CoovaChilli is configured by editing or creating certail files unser the /etc/chilli directory. File config default
Comment start as a copy of default and is edited to override specific variables defined in default To avoid the splash screen we have to remove one line from this file
http://radiusdesk.com/docuwiki/
Printed on 2017/05/19 01:33
2017/05/19 01:33
3/5
Install CoovaChilli on Ubuntu 14.04
File Comment ipup.sh Custom firewall rules for start-up ipdown.sh Custom firewall rule clean-up during shut-down. Use the following /etc/chilli/config file as a guideline to configure CoovaChilli HS_LANIF=eth1 # Subscriber Interface for client devices HS_NETWORK=10.1.0.0 # HotSpot Network (must include HS_UAMLISTEN) HS_NETMASK=255.255.0.0 # HotSpot Network Netmask HS_UAMLISTEN=10.1.0.1 # HotSpot IP Address (on subscriber network) HS_UAMPORT=3990 # HotSpot UAM Port (on subscriber network) HS_UAMUIPORT=4990 # HotSpot UAM "UI" Port (on subscriber network, for embedded portal) HS_NASID=localhost HS_RADIUS=localhost HS_RADIUS2=localhost HS_RADSECRET=testing123 # Set to be your RADIUS shared secret HS_UAMSECRET=greatsecret # Set to be your UAM secret HS_UAMALIASNAME=chilli HS_SSID="Struisbaai" HS_NASIP=127.0.0.1 # To explicitly set NAS-IP-Address HS_UAMSERVER=$HS_UAMLISTEN HS_UAMFORMAT=http://\$HS_UAMLISTEN/cake2/rd_cake/dynamic_details/chilli_brow ser_detect/ HS_MACAUTH=on # To turn on MAC Authentication HS_T_PORTS="80 23 8000" HS_MODE=hotspot HS_TYPE=chillispot HS_WWWDIR=/etc/chilli/www HS_WWWBIN=/etc/chilli/wwwsh HS_PROVIDER=Coova HS_PROVIDER_LINK=http://www.coova.org/ HS_LOC_NAME="My HotSpot" # WISPr Location Name and used in portal HS_COAPORT=3799 Comment the following line out of /etc/chilli/default. # Same principal goes for HS_UAMHOMEPAGE. #HS_UAMHOMEPAGE=http://\$HS_UAMLISTEN:\$HS_UAMPORT/www/coova.html Also comment the DNS server settings out in /etc/chilli/default to force CoovaChilli to use the DNS servers of the system that it is running on. # OpenDNS Servers #HS_DNS1=208.67.222.222 #HS_DNS2=208.67.220.220 Use the following /etc/chilli/ipup.sh file as a guideline UAM server specified as 10.1.0.1 iptables -I INPUT -i tun0 -p t -m t --dport 80 --dst 10.1.0.1 -j ACCEPT iptables -I INPUT -i tun0 -p t -m t --dport 443 --dst 10.1.0.1 -j ACCEPT RADIUSdesk - http://radiusdesk.com/docuwiki/
Last update: 2016/10/20 getting_started:install_ubuntu_coovachilli http://radiusdesk.com/docuwiki/getting_started/install_ubuntu_coovachilli 14:07
iptables -I INPUT -i tun0 -p t -m t --dport 22 --dst 10.1.0.1 -j ACCEPT iptables -I INPUT -i tun0 -p t -m t --dport 8000 --dst 10.1.0.1 -j ACCEPT Use the following /etc/chilli/ipdown.sh file as a guideline UAM server specified iptables -D INPUT -i iptables -D INPUT -i iptables -D INPUT -i iptables -D INPUT -i ACCEPT
as 10.1.0.1 tun0 -p t tun0 -p t tun0 -p t tun0 -p t
-m -m -m -m
t t t t
--dport --dport --dport --dport
80 --dst 10.1.0.1 -j ACCEPT 443 --dst 10.1.0.1 -j ACCEPT 22 --dst 10.1.0.1 -j ACCEPT 8000 --dst 10.1.0.1 -j
Add NAT By default CoovaChilli does not do NAT between the two interfaces. We have to add NAT during start-up in order to have a working system.
Failing to do this step will leave you with a broken system.
Edit the /etc/init.d/chilli file and add the following: test ${HS_TERVAL:-0} -gt && { (crontab -l 2>&- | grep -v $0 echo "*/$HS_TERVAL * * * * $0 radconfig" ) | crontab - 2>&} #NAT mod iptables -F POSTROUTING -t nat iptables -I POSTROUTING -t nat -o $HS_WANIF -j MASQUERADE #END NAT mod ifconfig $HS_LANIF 0.0.0.0
Test it out Restart CoovaChilli for the latest changes to be effected. sudo /etc/init.d/chilli stop sudo /etc/init.d/chilli start Confirm it started fine sudo tail /var/log/messages http://radiusdesk.com/docuwiki/
Printed on 2017/05/19 01:33
2017/05/19 01:33
5/5
Install CoovaChilli on Ubuntu 14.04
....... May 23 13:17:01 RADIUSdesk-Beta1-1 CRON[2427]: (root) CMD ( cd / && runparts --report /etc/cron.hourly) May 23 13:18:28 RADIUSdesk-Beta1-1 coova-chilli[2109]: chilli.c: 5511: DH Released MAC=08-00-27-90-61-AE IP=10.1.0.2 May 23 13:20:48 RADIUSdesk-Beta1-1 crontab[2444]: (root) LIST (root) May 23 13:20:48 RADIUSdesk-Beta1-1 crontab[2446]: (root) REPLACE (root) May 23 13:20:48 RADIUSdesk-Beta1-1 coova-chilli[2109]: chilli.c: 7544: CoovaChilli shutting down May 23 13:20:48 RADIUSdesk-Beta1-1 coova-chilli[2448]: main-script.c: 94: Running /etc/chilli/down.sh (107/) May 23 13:20:51 RADIUSdesk-Beta1-1 coova-chilli[2561]: CoovaChilli(ChilliSpot) 1.3.0. Copyright 2002-2005 Mondru AB. Licensed under GPL. Copyright 2006-2012 David Bird (Coova Technologies) <[email protected]>. Licensed under GPL. See http://www.coova.org/ for details. May 23 13:20:51 RADIUSdesk-Beta1-1 coova-chilli[2561]: tun.c: 605: TX queue length set to 100 May 23 13:20:51 RADIUSdesk-Beta1-1 coova-chilli[2563]: main-script.c: 94: Running /etc/chilli/up.sh (/) May 23 13:21:01 RADIUSdesk-Beta1-1 cron[809]: (root) RELOAD (crontabs/root) .......
Making things permanent Ensure that CoovaChilli will start up after reboots. sudo update-rc.d chilli start 99 2 3 4 5 . stop 20
1 6 .
Reboot the system and make sure CoovaChilli started up fine
From: http://radiusdesk.com/docuwiki/ - RADIUSdesk Permanent link: http://radiusdesk.com/docuwiki/getting_started/install_ubuntu_coovachilli Last update: 2016/10/20 14:07
RADIUSdesk - http://radiusdesk.com/docuwiki/
Related Documents 171j1w
Install Coovachilli On Ubuntu 14.04(1) 582m7
June 2021 0
Install Ubuntu On Toshiba Ac100 66a71
November 2019 59
Install Koha On Ubuntu 16 6x4046
April 2020 40
June 2022 0
39651459-3proxy-install-on-ubuntu-ami 1i6g1r
August 2022 0