Hana 4l5ec
This document was ed by and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this report form. Report r6l17
Overview 4q3b3c
& View Hana as PDF for free.
More details 26j3b
- Words: 6,846
- Pages: 57
ABAP ON HANA – ECLIPSE INSTALLATION Step-by-step Guide to setup ABAP on HANA with Eclipse FollowRSS feedLike 2 Likes 75,114 Views 98 Comments
Step by Step guide to install ABAP on Eclipse for HANA Development This blog describes how to install and update the front-end components of ABAP Development Tools (ADT) for SAP ABAP on HANA. I’m writing this blog as I see many people have asked questions about ABAP Development tool on Eclipse. One can take different approaches within Eclipse to bring ABAP development tool and this is one such approach. This blog is suitable for anyone who seeks to start the ABAP Eclipse setup or those who need of such information. I have also provided you with detailed screens on installation and how to configure ABAP back-end system for working with ADT to get you started. Hope you enjoy !!! Here are some pre-requisites for ADT on Eclipse:
Java JRE version 1.6 or higher, 32-Bit or 64-Bit SAP GUI (for Windows) 7.20 Patch Level 9 or above One of the following OS you’ve access to: Windows OS (XP*, Vista, or 7) 32- or 64-Bit, OR Apple Mac OS X 10.6, Universal 64-Bit OR
Linux distribution (any)
Note: For purpose of this blog, the screens below are from Windows 7 64-BitOS
s: Get an Eclipse (I tried with Kepler 4.3 version running current at this time of blog) installed. I ed a 64-bit Kepler version (based on my laptop OS) from the below location. (If you have already tried with other Eclipse versions e.g., Juno … no problem, it should still work!!!) http://www.eclipse.org/s/packages/eclipse-standard-432/keplersr2 Installation:
Install the Kepler Eclipse ed by running the executable (Pretty simple and straight forward) .
Post installation of Kepler eclipse, you need to install the Eclipse plug-in software to enable for ABAP development.
Post-Installation:
Choose add and provide the location of the ABAP Development Tools:
Click Ok. (You should have access to Internet to the above location for ing packages at this point of time) You should see the below screen now:
You can choose only ABAP Development tools (ADT). I have additionally chosen UI5 tools as well.
Clicking Next, You will be asked to accept the license agreement. On accepting, you should see as below:
After successful installation completion, you should get additional ADT topics in the overview screen as below:
Installation is now completed. You should get ABAP perspective (Menu: Window –> Open Perspective –> Other – Choose ABAP)
Now, proceed to configure the backend. Make sure you have SAP GUI with required version (7.20 Patch level 9 or above) is available. There is a dependency for re-use in ABAP for Eclipse as you see below. Configure SAP Backend for development Click File –> New ABAP Project
All the systems are listed from your SAP Logon Pad. Choose and provide the credentials with the client information to and fetch the technical development objects. The hierarchy starting with package and the objects library consisting of Dictionary objects, Classes, FMs, all of them are fetched and displayed and you can choose any of them and continue working just like your ABAP workbenches (most of the functionalities are availble in Eclipse)
Enjoy the new Eclipse development !!
Alert
Assigned tags
ABAP Development abap abap eclipse abap hana aie feature explorer
code push down juno kepler se38 eclipse se80
View more...
Related Blog Posts
Step-by-step Guide to update ABAP on HANA development tool with Eclipse By Former Member, Aug 15, 2014
ABAP on HANA Optimization – Step by Step Remediation By Former Member, Jan 07, 2016
ABAP for SAP HANA Reference Scenario – Tutorials By Carine Tchoutouo Djomo, Oct 23, 2014
Related Questions
Using ABAP on Eclipse Che By Raphael Pacheco, Mar 13, 2017
MB31- add custom field in screen By Pradip Patel, Nov 02, 2017
trigger events for CHANGED & CREATED events for BUS2032 By ABAPER P, Jul 25, 2017
98 Comments You must be Logged on to comment or reply to a post.
Thomas Fiedler July 31, 2014 at 6:31 am
Thanks for this detailed description of the installation process. Maybe you also want to share your experiences with the Feature Explorer?
Kind Regards, Thomas. o
Like(0)
o
Former Member Post author July 31, 2014 at 2:41 pm
Thanks Thomas, I’ll plan it out. – Senthil
Like(0)
Former Member July 31, 2014 at 11:09 am
Sounds interesting.
Regards, Waqar o
Like(0)
o
Former Member Post author July 31, 2014 at 2:44 pm
Thanks, in my view, the Eclipse just brings up most of the SAP GUI screens itself, so as a developer one will not have a deep learning curve. In addition most controls work as it works in se38/se80 screens. One will also find it useful, when we do a code push down to ABAP writing more database stored procedure, it will help managing it in single screen.- – Senthil
Like(0)
Former Member August 1, 2014 at 12:42 pm
Great guide and it worked perfectly initially (yesterday 31.07.2014) and I was able to selecct ABAP under Perspective->Other.
Today, however, when I open HANA Studio all the ABAP options are gone!
I tried to repeat the install process once more, but now I errors. Do you have any idea how to proceed best? Thanx in advance.
Log (01.08.2014):
Cannot complete the install because of a conflicting dependency. Software being installed: SAP HANA istration (Developer Edition) 1.81.3 (com.sap.ndb.studio..feature.devedition.feature.group 1.81.3) Software currently installed: SAP HANA Studio 1.0.48.201301130825 (com.sap.ndb.studio.product 1.0.48.201301130825) Only one of the following can be installed at once: SAP HANA Studio – Base Model 1.0.48.201301130825 (com.sap.ndb.studio.model.base 1.0.48.201301130825) SAP HANA Studio – Base Model 1.81.3 (com.sap.ndb.studio.model.base 1.81.3) Cannot satisfy dependency: From: SAP HANA istration (Developer Edition) 1.81.3 (com.sap.ndb.studio..feature.devedition.feature.group 1.81.3) To: com.sap.ndb.studio..feature.feature.group [1.81.3] Cannot satisfy dependency: From: SAP HANA Studio istration 1.81.3 (com.sap.ndb.studio..feature.feature.group 1.81.3) To: com.sap.ndb.studio.foundation.feature.feature.group 1.0.0 Cannot satisfy dependency: From: SAP HANA Studio – istration Feature 1.0.48.2013011308258k8YFZMFG0V1LdvJJeajhgxWmha2 (com.sap.ndb.studio.feature.feature.group 1.0.48.201301130825-8k8YFZMFG0V1LdvJJeajhgxWmha2) To: com.sap.ndb.studio.model.base [1.0.48.201301130825] Cannot satisfy dependency: From: SAP HANA Studio – Foundation 1.81.3 (com.sap.ndb.studio.foundation.feature.feature.group 1.81.3)
To: com.sap.ndb.studio.model.base [1.81.3] Cannot satisfy dependency: From: SAP HANA Studio 1.0.48.201301130825 (com.sap.ndb.studio.product 1.0.48.201301130825) To: com.sap.ndb.studio.feature.feature.group [1.0.48.2013011308258k8YFZMFG0V1LdvJJeajhgxWmha2] o
Like(0)
o
Former Member Post author August 1, 2014 at 2:04 pm
Welcome to Eclipse !!!
There is a conflict with the HANA studio. Do you have HANA studio installed too?
Try starting with Step #2 from above ie., Help –> Install new software within Kepler version of Eclipse. When you start the kepler, please check if you already see the ABAP perspective, if not you can always install the updates providing the update site (at Work with) as https://tools.hana.ondemand.com/kepler
Let me know how this works.
Cheers Senthil
Like(0)
Former Member August 1, 2014 at 2:29 pm
Thank you Senthil for answering. Yes I have HANA Studio installed and before I proceed like you suggest in your answer I would like to clarify another issue.
My Studio version is 48, but I need 80. When I try the update (as described in ‘SAP_HANA_Studio_Installation_Update_Guide_en’) I get the message: “No updates”. On the other hand on this location SAP | HANA Developer Edition I see that need version 80 is available.
One solution would be to uninstall and reinstall HANA Studio, but considering that I would then also have to go through the whole process of reinstalling Eclipse and any other ‘installed software’ manually this seems really like too much.
What do you recommend? It surely must be possible to get the HANA Studio update to work properly, or?
Like(0)
Former Member Post author August 1, 2014 at 5:39 pm
The ABAP Perspective is from Eclipse Kepler. You can uninstall HANA studio and go with Eclipse Kepler (see above s section above) to get the ABAP Perspective. This should meet your requirement to develop UI5 as well. I think you got mix-up with Hana Studio and Eclipse Kepler.
Like(0)
Former Member August 1, 2014 at 7:35 pm
There are so many tools out there that I am a bit lost.
My objective is to to develop in SAP HANA directly, but I also need the ability to consume views with ABAP.
What do I need HANA Studio for? Can Eclipse do everything that HANA Studio can?
Do I need to install the SAP GUI as indicated by you above? If yes, how can I it without an S-?
Like(0)
Former Member Post author August 1, 2014 at 8:05 pm
I could understand the confusion and this is usual only. One thing you need to know is technically it is all ONE platform. Technically all are eclipse, the key is you need to have ABAP on HANA (writing DB procedures) and HANA Tools need to be installed. For this I started of with Kepler and it worked. In fact I have HANA studio also installed, so both can (and will) coexist (although you need to choose different workspaces for better management). Go ahead start afresh installation uninstalling Hana studio. Yes, you need to have SAP GUI installed, because this is required for ABAP editor to be displayed in Eclipse. Trust this helps! Cheers
Like(0)
Former Member August 1, 2014 at 8:09 pm
Thank you for your anwer. Do you know how I can the SAP GUI without an S-?
OR
how I can get an S- in order to the SAP GUI?
Like(0)
Former Member August 1, 2014 at 10:27 pm
Thanx for the hint and the link. In order to apply for an S- it still seems as if you have to be a SAP customer. I am developing on my own installation of AWS HANA and hence have no customer/partner number and cannot apply through the link you provided
… that is unless you know something I do not.
Like(0)
Former Member August 3, 2014 at 9:35 pm
Seems as if I be getting an S-. Thanx for your help.
Like(0)
Jens Weiler August 4, 2014 at 9:11 am
Hi Martin,
easiest way (and no S- is needed) is to a “naked” Eclipse Kepler from the Eclipse Site and afterwards add the needed Plug-Ins from this site SAP Development Tools for Eclipse
Here you can get the latest HANA Studio and ABAP Development Tools (and even more).
Hope this helps.
Cheers
Jens
Like(0)
Former Member August 5, 2014 at 7:59 pm
Hi Senthil, Nice blog, I have a question , if I wnated to consume HANA based service in SAP ABAP , what is the setup I need? is it similar to what you have mentioned above?
I need to consume some data from HANA system and used it on ABAP report. If you could give some thought around this topic that would be agreat help.
Specific to : what is the version of SAP NW ABAP , Eclipse and HANA Studio I shoud ahve Thanks Krishna o
o
Like(0)
Thomas Gauweiler August 6, 2014 at 6:49 am
Dear Krishna, In fact you call choose also the HANA studio parts when you install ADT into your eclipse. You can then access both HANA directly as well as ABAP from the same eclipse.
How to consume the HANA based service in ABAP depends on the kind of service of service. Starting with ABAP 740 SP05 we recommend CDS Views and AMDP (ABAP Managed Database Procedures) to access HANA specific services.
The HANA studio version should be the same as the HANA database. ADT can always be the newest version as it checks the features of each connected ABAP backend.
Best Regards, Thomas
Like(0)
SAP Seeker August 23, 2014 at 6:25 pm
Dear Thomas,
As per this blog, we should have SAP GUI 7.2 with patch 9 installed in our system to access the server and write ABAP programs. Same way, should we have something like HANA Studio/Client installed to access them ? I am a beginner. Please guide.
Thanks and Regards, Seeker.
Like(0)
Thomas Gauweiler August 25, 2014 at 6:19 am
No, there is nothing needed in addition. Just use the eclipse update site.. Best Regards, Thomas
Like(0)
Sharmila Subramanian August 6, 2014 at 8:07 am
Hi Senthil,
Nice blog that illustrates the installation clearly.
Regards, Sharmila o
Like(0)
o
Former Member Post author August 15, 2014 at 11:06 pm
Thank you for your comments
Regards
Senthil
Like(0)
Sreehari V Pillai August 25, 2014 at 7:04 am
good info . Thanks o
Like(0)
Former Member September 3, 2014 at 9:19 pm
Pls am a novice and intend to learn SAP. what are the tools i need to install and study materials?
Cheers o
Like(0)
Former Member September 8, 2014 at 7:39 pm
Thanks for a wonderful write up, waiting for next ones. o
Like(0)
Former Member October 1, 2014 at 3:21 am
Hello Senthil,
Thanks for nice blog. I have installed Eclipse Luna and created the Hana Instance from AWS. As configuration is required in Eclipse, for Hana and SAP GUI. Currently i do not have SAP. Can you suggest, any link to SAP GUI, which can be used with Eclipse and steps for linking AWS & Eclipse. Appreciate if you can provide any information on this.
Regards, Amrit o
Like(0)
o
Former Member Post author October 1, 2014 at 6:37 pm
@Amrit You can also manually define projects in Eclipse Luna to use AWS HANA instance.
Refer this link if you need more details. I’m not sure if it is yet ed for Luna, but you can check. Hope this helps.
Regards Senthil
Like(0)
Former Member October 17, 2014 at 7:57 am
Hi Senthil,
Thanks for the informaton. It was realy helpful for me. Nicely described the steps through screenshots. o
Like(0)
Former Member November 6, 2014 at 12:49 am
Hi Senthil, Thank you! I followed your steps but I can`t load the repository. I think that my site blocks that address.
Error Msg. is below. “Unable to read repository at https://tools.hana.ondemand.com/kepler/content.xml. Unable to read repository at https://tools.hana.ondemand.com/kepler/content.xml. peer not authenticated”
Is there any solution?
Regards. o
Like(0)
o
Former Member Post author November 6, 2014 at 1:33 am
It has only to do with the way you access Internet, that should fix this issue. The site is up and running ! Try running from a different site or network ..
Good luck !
Like(0)
Former Member September 14, 2016 at 8:20 am
Neon eclipse can retrieve components by url https://tools.hana.ondemand.com/neon . But on the same machine , mars cant do it by url https://tools.hana.ondemand.com/mars So it seems that the network is not the only reason . Right ?
Like(0)
o
Former Member September 14, 2016 at 2:29 am
Dear friends,
Have you solved the problem ? I installed the mars eclipse version . When It fetches 50%, a “problem Occurred” popup dialogue appears ,saying that “Unable to connect to repository https://tools.hana.ondemand.com/mars/content.xml org.eclipse.equinox.p2.core.Provi sionException” .
If you solved this problem , can you tell me how to do ?
Like(0)
Former Member November 9, 2014 at 1:45 pm
hi senthil
Nice Document hleped in double checking my installation.
I have installed Hana studio latest then added the ADT.
I could create a CDS View and also wrote a report trying to execute that view.
But it throws an error cx_salv_dbtable_not_ed
what could be the issue
thanks and regards arun o
Like(0)
o
Former Member Post author November 9, 2014 at 7:23 pm
Arun
I do not have full details from the above posting, but one thing I can see here is about your scenario.
This is a database NOT ed message. There are some scenarios that are specific to DB, for e.g., in your case the underlying database is not ed for the ALV operation you’re performing. please check..
Good luck !
Like(0)
Former Member November 10, 2014 at 3:30 am
Hi Senthil
Thnaks for the the reply.
It was a syntax error.
Thanks and regards
Arun
Like(0)
Sneha Jadhav November 10, 2014 at 5:25 am
Hi Senthil,
I have followed all the above mentioned steps but while configuring the SAP backend for ABAP development I have selected the system and provided the credentials with the client information to , I got following error: ” Logon to system failed (System does not Eclipse-based ABAP Development Tools)”.
Please help me with this.
Thanks. o
Like(0)
o
Former Member Post author November 11, 2014 at 3:43 pm
Hi Unfortunately, Eclipse needs some minimum versions to connect, please check your system version. Your backend ECC ABAP should be 7.03/ 7.31 SP4 (SAP_ABA, SAP_BASIS comps) and above please check your system–>status, good luck!!
Like(0)
Sneha Jadhav November 12, 2014 at 9:23 am
Hi, Thank you for the reply. I have 1 doubt regarding back end system. Do we need dual stack system (java and ABAP) or will it work on ECC ABAP system only. o
Like(0)
o
Christian Lechner November 12, 2014 at 3:51 pm
Hi,
there is no need for teh Java Stack in your system. The stuff described here is working in an ABAP ECC standalone system. But please be aware that there are some requitrements concerning the Netweaver release of the ABAP stack
BR Christian
Like(0)
Former Member November 15, 2014 at 10:43 am
Hi Senthil,
Excellent documentation. I had all the setup and the tools ready but couldn’t figure out a way where I could connect to the ECC through Eclipse.
One quick question, in the above steps, only when we create a new ABAP project is it prompting for the connection and the system. Is it possible to permanently establish the connection somewhere? Also, instead of creating a new ABAP Project, is it possible to open some existing ABAP reports on the ECC system?
One more doubt, slightly off topic, in the same way, can we also connect to the ECC system to develop Fiori apps? If so, is it also through the ABAP perspective and what else tools do we need to from the SAP link?
Thanks a lot in advance.
Regards,
George Abraham o
Like(0)
o
Former Member Post author November 15, 2014 at 12:41 pm
Hi George
Connectivity to ECC is via Eclipse project as the same tool (from a larger development view) Eclipse can be used for multiple development (UI5, ABAP, etc.,). The reason it is prompting for connection and system and why we cannot store it is also same. Secondly, you can open all your existing ABAP development objects in ECC system as once you’re connected to ECC system ADT brings up the entire SAP GUI to your use, you can even execute tcodes just like as if you’re in SAP GUI.
On Fiori, the UI5 shell component and Gateway has to be enabled in ECC system (prereq. for deploying Fiori apps). For development, you can use the same ADT tool and open a different project type (UI5 Application Development) in Eclipse.
Hope this clarifies..
Good luck ! Senthil Muthuvelu
Like(0)
Former Member November 21, 2014 at 7:02 am
Thank you Senthil for the clarifications. Yes, I have already started working on the same
Like(0)
Former Member January 4, 2015 at 8:57 am
Hi All,
Eclipse is already installed in my system. But I am unable to access my backend system.
For normal log on I need to enter my token number and RSA is activated in GUI. And also ” Maximum settings available” option is on.
So are there any settings in ECLIPSE for logging in using Token?
Thanks in Advance.
Regards, Praveen o
Like(0)
o
Former Member Post author January 4, 2015 at 3:05 pm
Hi Praveen
Follow the same procedure, using the RSA in normal logon pad, then access Eclipse.. there is no settings in Eclipse /plugin to access RSA token.. Because RSA is only a VPN connectivity to establish network connection.. so as long as you access Network and the backend, it should work.. Cheers Senthil !
Like(0)
Former Member April 14, 2016 at 11:15 am
I m Getting this …
Former Member January 13, 2015 at 3:14 pm
Thanks! o
Like(0)
Like(0)
Former Member January 27, 2015 at 1:32 pm
Thank you very much for sharing. o
Like(0)
Bert Brouns February 16, 2015 at 12:46 pm
Thanks, nice blog o
Like(0)
Former Member March 17, 2015 at 6:43 am
Great blog. keep it going… o
Like(0)
zongjie zhang March 17, 2015 at 7:54 am
Thanks for sharing. But after I install all the software, when I try to connect the sap logon (EGD system). but it say EGD did’t the eclipse. My sap gui is 730 o
Like(0)
zongjie zhang March 17, 2015 at 7:55 am
Thanks for sharing. But after I install all the software, when I try to connect the sap logon (EGD system). but it say EGD did’t the eclipse. My sap gui is 730 o
Like(0)
Avinash M March 17, 2015 at 10:15 am
I am getting error, below is the snap .
any help?? o
Like(1)
o
Thomas Gauweiler March 17, 2015 at 12:24 pm
You can find at SAP Development Tools for Eclipse the links for the missing Microsoft runtime DLLs. Regards, Thomas
Like(0)
Avinash M March 18, 2015 at 4:14 am
this got a serious issue. I am getting same error after installing missing dll. . going back to sap logon pad.
Like(0)
Jasmin Gruschke March 18, 2015 at 5:46 am
Hey Avinash, please post a question to the ADT experts in the ABAP in Eclipse forum. Cheers, Jasmin
Like(0)
Former Member November 11, 2015 at 7:22 pm
Avinash, the SAP documentation for ADT is quite clear to inform you what is the pre-requisite to check. The error message is actually quite clear.
–Steve–
Like(0)
Roland Kramer March 18, 2015 at 12:21 pm
Hi, See also the Document – SAP First Guidance – Implementing BW-MT for BW-aDSO which adds the BW-MT Implementation as well.
Best Regards Roland o
Like(0)
Srinivasan Vinayagam April 21, 2015 at 8:25 am
Hi Senthil,
Nice document. Thank you for sharing. Please share some real time example. where we implement the this.
Regards, V Srinivasan o
Like(0)
prabhith prabhakaran April 23, 2015 at 8:50 am
Senthil Murugan Muthuvelu,
Really Nice documentation. was able to configure in my environment without any issues.
Thanks a lot.
BR Prabhith o
Like(0)
Former Member May 15, 2015 at 12:27 pm
Thanks Senthil Murugan Muthuvelu ,its a nice document for everyone . o
Like(0)
Timothy Muchena May 28, 2015 at 9:59 am
Hi
Do you know which tools(kepler or luna) I should use to install ABAP plugins in the HANA studio?
Thanks and kind regards o
Like(0)
o
Former Member May 30, 2015 at 2:28 am
Both the Eclipse version would work fine but go for Luna i suggest.
Like(0)
Jorge Celedon June 2, 2015 at 5:52 pm Thanks for this detailed description of the installation process.
o
Like(0)
Former Member June 15, 2015 at 7:31 am
nice document o
Like(0)
Former Member August 8, 2015 at 11:42 am
hi senthil i already done with installation of abap and ui5 in eclipse but i don’t have sap logon credentials so for credentials where i have to plz help me..
Regards.. Swapnil
o
Like(0)
AMIT Lal September 11, 2015 at 5:28 pm
Thanks for steps document o
Like(0)
Amit Diwane October 28, 2015 at 7:33 am
Nice Article. o
Like(0)
Daniel N. Coelho December 10, 2015 at 1:45 pm Nice documentation. Thank you
o
Like(0)
Former Member February 25, 2016 at 1:14 pm
how to know which abap package I am currently using. I mean is it ABAP 7.4 SP05/SP02
Thanksin advance o
Like(0)
o
Former Member February 25, 2016 at 2:04 pm
Prashant, can you clarify what exactly is your question? If you want to know what ABAP SP level, you go to your system and go to System –> Status on toolbar.
–Steve–
Like(0)
Former Member February 26, 2016 at 5:01 am
thanks steve
Like(0)
Former Member March 8, 2016 at 1:45 pm
Can you please on your SAP Website offer the Eclipse p2 repository https://tools.hana.ondemand.com/mars/ as zip ? We have computers that are not connected to the Internet. thank you. o
Like(0)
o
Former Member September 14, 2016 at 2:11 am
Have you got hana studio plugin ? It is strange that I face the problem you described.
Like(0)
Former Member April 11, 2016 at 5:52 am
very helpful , thank you. o
Like(0)
Mateusz Nowak April 12, 2016 at 12:22 pm
Thank You for this step by step guide! o
Like(0)
Former Member April 14, 2016 at 11:13 am
I am getting this error…. o
Like(0)
o
Former Member April 14, 2016 at 1:11 pm
Parwez, were you able to to SAP just using your SAPGui without initially going thru’ SAP HANA Studio?
–Steve–
Like(0)
Former Member April 14, 2016 at 3:35 pm
Hi Steve Yes I can use using SAPGui.
Like(0)
Former Member April 14, 2016 at 3:40 pm
Parwez, yes you can to EA1 using the SAPGui without going thru’ SAP HANA Studio? Is that your answer?
–Steve–
Like(0)
Former Member April 14, 2016 at 5:22 pm
Yes,but by using eclipse kepler I’m unable to showing above error.
Like(0)
Former Member August 12, 2016 at 12:56 pm
Parwez, you might want to check your proxy settings. This might prevent you from doing that. Good luck.
Steve
Roland Kramer April 16, 2016 at 11:08 am
Like(0)
Did you also check this Document – SAP First Guidance – Implementing BW-MT for BW-… | SCN Best Regards Roland o
Like(0)
Former Member May 27, 2016 at 3:21 am
Hi Senthil,
It’s really a nice blog and I made it successfully according to it. I got a question what’s difference between AiE and directly logon via GUI?
Regards Xuebin o
Like(0)
Amanda Triplett July 19, 2016 at 12:43 am
Thank you for this step by step document. It is very helpful. o
Like(0)
Christoph Volkert August 16, 2016 at 10:55 am
Hello,
i need to install Eclipse with ADT on a lot of machine. Eclipse itselfs runs fine from a shared folder, but every single on every computer needs to and install ADT by itself. Thus blocking our Internet with massive bandwidth consumption and destroying a lot of work time. Could you please tell me how to set up the ADT-repository inside the network or how to deploy a complete install of Eclipse (together with ADT)?
Thank you a lot. Im working on this problem now for a lot of time and didn’t get a working result. Last i tried was the dropins-folder, but that doens’t worked also, maybe i missed some. o
Like(0)
o
Thomas Fiedler August 22, 2016 at 9:45 am
Hi Christoph, the easiest way to provide eclipse in a big landscape initially is via a zip File that contains eclipse + the ABAP tools. Updates can be provided by the updatesites. You can setup your own corporate update site. Details can be found here: Learn How to Configure an Update Site for Providing Installation Packages of ABAP Development Tools
Does this help ?
Regards, Thomas.
Like(0)
Former Member September 9, 2016 at 2:55 am
the url https://tools.hana.ondemand.com cant help me retrieve the hana studio plugin . Is it changed now ? o
Like(0)
o
Thomas Fiedler September 13, 2016 at 1:20 pm
No, there are still there:
SAP Development Tools
Regards, Thomas.
Like(0)
Former Member September 14, 2016 at 2:39 am
Thank you Thomas ,
I followed the instructions in the link you provided . The prerequisite and the procedures are right . When I try to get the hana studio plugin , it will popup a dialogue ,saying that “Unable to connect to repository https://tools.hana.ondemand.com/mars/ content.xml org.eclipse.equinox.p2.core.ProvisionException ” .
So I am confused .
Regards
Jessica
Like(0)
Thomas Fiedler September 14, 2016 at 6:41 am
Hi Jessica, you should switch to Eclipse Neon und use the /…./Neon Updatesite. In parallel I will clarify what’s wrong with Mars Updatesite.
Regards, Thomas.
Like(0)
Former Member September 14, 2016 at 7:49 am
Dear Thomas,
Ok, I just tried that Neon is ok , Mars does not work in the same machine . Thank you Thomas.
I have a task on mars recently , so kindly ask you to tell me about the solution to mars .
Million thanks
Regard Jessica
Like(0)
Thomas Fiedler September 14, 2016 at 7:53 am
Hi, what do you mean with ‘I have a task on Mars’ Can’t you switch to Neon?
Regards, Thomas.
Like(0)
Former Member September 14, 2016 at 8:09 am
Dear Thomas ,
Yeah, I must test a special feature of hana on mars .
I know that there is another way to get hana studio plugin , but I do not understand the meaning of each word . it says that ” If you have a HANA server running and the HANA XS engine has been enabled ,specify the update site location with http://
/sap/hana/studio .This will the plugin tools from your HANA server ” ,which quoted from url ,http://startup focus.saphana.com/install-sap-hana-as-aneclipse-plugin/ .
It is strange that I tried every possible directory , They can’t obtain hana studio plugin either .
So , what’s the meaning of ‘/sap/hana/studio’ ?
Do you know that ?
Thank you Thomas
Regards, Jessica
Like(0)
Former Member September 14, 2016 at 12:07 pm
Jessica, I think what Thomas is saying can’t you switch to use Eclipse Neon instead of Mars. I have the same problem in the ing it. Someday I can and some days I can’t. Can you check your company firewall and work with your network folks to have fully open for that site just to test the connection ? If it works then slowly tighten up your network security. Also, on your internet browser, did you allowed the mars site for ? Good luck
Steve
Like(0)
Former Member September 18, 2016 at 2:58 am
Dear Steve ,
I have checked the issues that you suggested .
Today , I just find why my mars eclipse can’t do the same thing . On mars eclipse Active Provider in Network Connections configuration is set as manual , while on neon is set as native . After I changed this configuration on mars , it can obtain hana studio plugin successfully .
Thank you for the tips .
Sincerely Jessica
Like(0)
Former Member September 18, 2016 at 3:03 am
Dear Thomas ,
Here I want to give you a good news of me . I retrieve the studio plugin successfully on mars now ! It happens after I change the Active Provide in Network Connections to ‘native’ , instead of ‘manual’ .
Ah, what’s the difference between them ?
Sincerely Jessica
Like(0)
Felix Otto September 19, 2016 at 7:31 am
Hi Jessica,
that’s what the Eclipse Help says about the possible “Active Provider” options:
Specifies the settings profile to be used when opening connections. Choosing the Direct provider causes all the connections to be opened without the use of a proxy server. Selecting Manual causes settings defined in Eclipse to be used. On some platforms there is also a Native provider available, selecting this one causes settings that were discovered in the OS to be used.
Regards, Felix
Like(0)
Former Member September 19, 2016 at 8:07 am
Thank you Felix ,
I am quite clear now . I guess something is wrong with the proxy setting .
Thank you all . You are so kind .
Regards Jessica
Like(0)
Former Member March 29, 2018 at 5:36 am
Can someone help me with these errors:
An internal error occurred during: “ABAP occurrence markers”. annotationDefs An internal error has occurred. Could not initialize class org.eclipse.ui.internal.progress.ProgressInfoItem An internal error has occurred. Could not initialize class org.eclipse.ui.internal.progress.ProgressInfoItem
o
Like(0)
Former Member May 16, 2018 at 1:50 pm
Hi,
I have the error ” An internal error occurred during: “ABAP occurrence markers”. annotationDefs”. eclipse.buildId=unknown java.version=1.8.0_77 java.vendor=SAP AG BootLoader constants: OS=win32, ARCH=x86_64, WS=win32, NL=en_US Command-line arguments: -os win32 -ws win32 -arch x86_64 org.eclipse.core.jobs Error Wed May 16 08:13:48 CDT 2018 An internal error occurred during: “ABAP occurrence markers”. java.lang.NoSuchFieldError: annotationDefs at com.sap.adt.cds.ddl.internal.parser.versions.AbstractAbapDdlParser.onCommitMatch(AbstractA bapDdlParser.java:449) at com.sap.rnd.rndrt.resolver.base.TokenCoCoParser.onCommitMatch(TokenCoCoParser.java:181) at com.sap.rnd.rndrt.resolver.base.Parser.vmMatch(Parser.java:1090) at com.sap.rnd.rndrt.resolver.base.Parser.replay(Parser.java:2872) at com.sap.rnd.rndrt.resolver.base.Parser.commitAndReplay(Parser.java:2359) at com.sap.rnd.rndrt.resolver.base.Parser.vmSys(Parser.java:2563) at com.sap.rnd.rndrt.resolver.base.Parser.run(Parser.java:1815) at com.sap.rnd.rndrt.resolver.base.Parser.run(Parser.java:192) at com.sap.rnd.rndrt.resolver.base.TokenCoCoParser.run(TokenCoCoParser.java:355) at com.sap.cds.ddl.internal.parser.AbstractDdlParser.run(AbstractDdlParser.java:180) at com.sap.adt.cds.ddl.internal.parser.versions.AbstractAbapDdlParser.run(AbstractAbapDdlParser. java:3666) at com.sap.cds.ddl.internal.parser.DdlRndParserApi.runParserForTokenQualification(DdlRndParser Api.java:337) at com.sap.cds.ddl.internal.parser.DdlRndParserApi.parseSource(DdlRndParserApi.java:325) at com.sap.adt.cds.ddl.ui.internal.editors.pages.DdlTokenOccurrenceFinder.findOccurrences(DdlTo kenOccurrenceFinder.java:50)
at com.sap.adt.tools.abapsource.ui.internal.occurrence.OccurrenceHandler$OccurrencesFinderJob. run(OccurrenceHandler.java:678) at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)
Any help would be appreciated.
Simple Finance: TECH SPEAK Follow RSS feed Like 0 Likes 84 Views 0 Comments
SAP Simple Finance is an add-on to ERP powered by SAP HANA and is known as S/4 HANA.S/4HANA is adding HANA capabilities to ECC or R/3 ERP functionality. Hence this allows ERP optimized to run on HANA which is In-memory column based database. SAP provides options for both On-premise installation and cloud based. Experience can be enhanced using SAP Fiori which is a Graphical interface. ABAP is still the language for developers but would need some minor changes in order to write column based optimized code. Custom ABAP code plays often an important role for these main business processes. All details how to implement and benefit from the ABAP SQL Monitor can be found in the attached ABAP SQL Monitor guide. sFin is another name for Simple Finance which includes SAP Cash Management and SAP Integrated Business Planning (IP and BPC and embedded BW) for Finance. Since this is an evolving product not all solutions are yet integrated with Sfin2.0 so evaluate carefully before recommending the move to simple finance.
1. SAP enhancement package 7 for SAP ERP 6.0 is a pre-
requisite. 2. Totals tables and application index tables have been removed and replaced with CDS views with the same technical names. Assess impact on your RICEF objects, authorization profiles, and HANA database 3. Migration to New Asset ing module is must 4. SAP cash Management and Integrated Planning would require SAP Fiori
5. based COPA is activated by default and no impact to 6. 7. 8. 9. 10. 11.
Costing based COPA The experience is likely to change with Universal Journal Secondary cost elements have to be created as GL s Important SAP Notes no’s 1925902, 1968568 Introduction of Central Finance (CFS) No solution available yet for Data Archived HANA tools do not hierarchies
Below is the list of table names replaced by their CDS views: The line item, totals tables and application index tables of General Ledger ing (GLT0, BSIS, BSAS and FAGLFLEXA, FAGLFLEXT, FAGLBSIS, FAGLBSAS) The totals tables and application index tables of s Receivable and s Payable (KNC1, KNC3, LFC1, LFC3, BSID, BSIK, BSAD, BSAK) The line item and totals tables of Controlling (COEP for certain value types, COSP and COSS) The material ledger tables for parallel valuations (MLIT, MLPP, MLPPF, MLCR, MLCD, CKMI1, BSIM) The Asset ing tables (ANEK, ANEP, ANEA, ANLP, ANLC)
SAP does not anticipate any impact to your existing infrastructure when you move to sFin as long as you are performing the Read function. If you are performing a write function into the existing tables they would be impacted.
Shakeel Ahmed January 31, 20183 minute read
SAP ERP to S/4 HANA Migration Scenarios Follow RSS feed Like
9 Likes 17,987 Views 5 Comments
# Purpose of this Article There have been multiple scenarios while it comes to SAP (ECC) ERP migration to SAP S/4 HANA. It is important to understand customers current landscape and used functionalities and modules in current SAP landscape/system to determine the appropriate S/4 HANA migration scenario. Determination of migration scenario is so important that based on this understanding only scope, team size and project valuation (bidding value) can be determined. For example, there could be multiple phases (sub projects) in one simple e.g. ECC6, EhP7 migration to S/4 HANA 1709.
Identification of appropriate migration scenario would help you finalizing following things: 1. Magnitude of Work (Scope) 2. Number of Project Phases 3. Team Size Requirement 4. Project Amount (Bid Amount) Mainly this article is for sales team involved in approaching customers for SAP migration. I hope it helps them. Note: This article is mainly for SAP consultants/management who are market goers (Sales Team). Please get your basics strong before committing anything about S/4 HANA Migration. In this article we would be focussing on Scenario 6 and Scenario 7. Other Scenarios will be covered in future articles. Note: This document is prepared considering that first, the migration will take place from ECC environment and required additional functionality would be activated in the migrated S/4 HANA 1709 environment. With this your customer would be in your hand. # SAP S/4 HANA Migration Scenarios
Note: A new scenario has been evolved in S/4 HANA 1709 for customers who are already in SAP ERP with HANA1 (Suite on HANA) or S/4 HANA with HANA1 (S/4 HANA Finance 1503, 1605 and S/4 HANA 1511, 1610) and want migrate to S/4 HANA 1709 (which is on HANA2). Migration has to be done in two phases: Phase1: SAP ERP o HANA (Suite on HANA) to SAP ERP HANA2 (Suite on HANA2) Phase2: S/4 HANA with HANA1 (S/4 HANA Finance 1503, 1605 and S/4 HANA 1511, 1610) to S/4 HANA 1709 (1709 is on HANA2)
# S/4 HANA Migration Concepts (Doc. Splitting and Parallel Ledger/ing/HANA2) Following points help you determining migration scenario in respect to scenario 6 and scenario 7: 1. There is no concept of ‘New GL or ‘Classic GL’ in S/4 HANA 2. New GL is not a pre-perquisite for migrating to S/4 HANA, you can migrate to S/4 HANA from classic GL 3. Migration from Classic GL to S/4 HANA 1610 (1503, 1511, 1605 and 1610) was possible, but subsequently document splitting was not possible and due to this SAP recommendation was to activate first New GL (Ledger introduction and document splitting) and then migrate to S/4 HANA 4. Migration from Classic GL (without activating to New GL) to S/4 HANA 1709 is possible, additionally, now subsequent document splitting and ledger introduction is possible in S/4 HANA 1709. This is the reason, now there is no need of doing a project for New GL activation in ECC environment. 5. Need to keep in mind that there might be possible three separate projects for converting ECC on classic GL to S/4 HANA with document splitting and parallel ing (additional ledgers). 6. Subsequent Ledger (Parallel ing) introduction was possible from SAP S/4 HANA Finance SAP 1605 and S/4 HANA 1610. 7. A new scenario has been evolved in S/4 HANA 1709 for customers who are already in SAP ERP with HANA1 (Suite on HANA) or S/4 HANA with HANA1 (S/4 HANA Finance 1503, 1605 and S/4 HANA 1511, 1610) and want migrate to S/4 HANA 1709 (which is on HANA2). Migration has to be done in two phases:
# Project Phases for Migrating SAP ECC System to S/4 HANA 1709 Considering there is one SAP ECC customer with classic GLs and he wants to move to S/4 HANA 1709. He also wants have functionality such as document splitting and parallel ing (additional ledgers).
Phase 1: ECC Migration to S/4 HANA a. Preparatory Phase System Requirement (Unicode Conversion) Maintenance Planner Pre-Checks Custom Code Pre-Parathion b. Technical Migration (SUM)
Database Migration Software Upgrade Data Conversion
c. Delta Customization d. Data (Functional) Migration (Migration Cockpit) e. Testing f. Go-Live
Phase2: Activation of Parallel Ledger (Non-Leading Ledger Introduction) SAP has two approaches to meet multi GAAP reporting requirements i.e. the approach and the ledger approach 1. Preparatory Phase 2. Execution Phase 3. Post – Processing Phase
Phase3: Activation of Document Splitting 1. Preparatory Phase 2. Execution Phase 3. Post – Processing Phase
(Further detailing can be obtained from this blog https://blogs.sap.com/2017/12/11/subsequentdocument-splitting-in-s4-hana-finance-1709-on-premise/#) Note: No SLO service is required for activating document splitting subsequently. Standard document splitting activation cockpit is available in IMG node in S/4 HANA 1709.
# Major/Select Changes in S/4 HANA 1709 If you are going to customer for sales pitch before that please get the understanding of ‘what is new in S/4 HANA 1709’.
New HANA Data Base i.e. HANA 2 DB Machine Learning capabilities on S/4 HANA 1709 On-Premise Expanding Core with Embedded Innovation on Core: Demand Driven Replacement, Advanced Variant Configuration, Real Time Inventory Management (e.g. Oil & Gas) New S/4 HANA Migration Cockpit New addition to SAP Fiori Lot
Step by Step guide to install ABAP on Eclipse for HANA Development This blog describes how to install and update the front-end components of ABAP Development Tools (ADT) for SAP ABAP on HANA. I’m writing this blog as I see many people have asked questions about ABAP Development tool on Eclipse. One can take different approaches within Eclipse to bring ABAP development tool and this is one such approach. This blog is suitable for anyone who seeks to start the ABAP Eclipse setup or those who need of such information. I have also provided you with detailed screens on installation and how to configure ABAP back-end system for working with ADT to get you started. Hope you enjoy !!! Here are some pre-requisites for ADT on Eclipse:
Java JRE version 1.6 or higher, 32-Bit or 64-Bit SAP GUI (for Windows) 7.20 Patch Level 9 or above One of the following OS you’ve access to: Windows OS (XP*, Vista, or 7) 32- or 64-Bit, OR Apple Mac OS X 10.6, Universal 64-Bit OR
Linux distribution (any)
Note: For purpose of this blog, the screens below are from Windows 7 64-BitOS
s: Get an Eclipse (I tried with Kepler 4.3 version running current at this time of blog) installed. I ed a 64-bit Kepler version (based on my laptop OS) from the below location. (If you have already tried with other Eclipse versions e.g., Juno … no problem, it should still work!!!) http://www.eclipse.org/s/packages/eclipse-standard-432/keplersr2 Installation:
Install the Kepler Eclipse ed by running the executable (Pretty simple and straight forward) .
Post installation of Kepler eclipse, you need to install the Eclipse plug-in software to enable for ABAP development.
Post-Installation:
Choose add and provide the location of the ABAP Development Tools:
Click Ok. (You should have access to Internet to the above location for ing packages at this point of time) You should see the below screen now:
You can choose only ABAP Development tools (ADT). I have additionally chosen UI5 tools as well.
Clicking Next, You will be asked to accept the license agreement. On accepting, you should see as below:
After successful installation completion, you should get additional ADT topics in the overview screen as below:
Installation is now completed. You should get ABAP perspective (Menu: Window –> Open Perspective –> Other – Choose ABAP)
Now, proceed to configure the backend. Make sure you have SAP GUI with required version (7.20 Patch level 9 or above) is available. There is a dependency for re-use in ABAP for Eclipse as you see below. Configure SAP Backend for development Click File –> New ABAP Project
All the systems are listed from your SAP Logon Pad. Choose and provide the credentials with the client information to and fetch the technical development objects. The hierarchy starting with package and the objects library consisting of Dictionary objects, Classes, FMs, all of them are fetched and displayed and you can choose any of them and continue working just like your ABAP workbenches (most of the functionalities are availble in Eclipse)
Enjoy the new Eclipse development !!
Alert
Assigned tags
ABAP Development abap abap eclipse abap hana aie feature explorer
code push down juno kepler se38 eclipse se80
View more...
Related Blog Posts
Step-by-step Guide to update ABAP on HANA development tool with Eclipse By Former Member, Aug 15, 2014
ABAP on HANA Optimization – Step by Step Remediation By Former Member, Jan 07, 2016
ABAP for SAP HANA Reference Scenario – Tutorials By Carine Tchoutouo Djomo, Oct 23, 2014
Related Questions
Using ABAP on Eclipse Che By Raphael Pacheco, Mar 13, 2017
MB31- add custom field in screen By Pradip Patel, Nov 02, 2017
trigger events for CHANGED & CREATED events for BUS2032 By ABAPER P, Jul 25, 2017
98 Comments You must be Logged on to comment or reply to a post.
Thomas Fiedler July 31, 2014 at 6:31 am
Thanks for this detailed description of the installation process. Maybe you also want to share your experiences with the Feature Explorer?
Kind Regards, Thomas. o
Like(0)
o
Former Member Post author July 31, 2014 at 2:41 pm
Thanks Thomas, I’ll plan it out. – Senthil
Like(0)
Former Member July 31, 2014 at 11:09 am
Sounds interesting.
Regards, Waqar o
Like(0)
o
Former Member Post author July 31, 2014 at 2:44 pm
Thanks, in my view, the Eclipse just brings up most of the SAP GUI screens itself, so as a developer one will not have a deep learning curve. In addition most controls work as it works in se38/se80 screens. One will also find it useful, when we do a code push down to ABAP writing more database stored procedure, it will help managing it in single screen.- – Senthil
Like(0)
Former Member August 1, 2014 at 12:42 pm
Great guide and it worked perfectly initially (yesterday 31.07.2014) and I was able to selecct ABAP under Perspective->Other.
Today, however, when I open HANA Studio all the ABAP options are gone!
I tried to repeat the install process once more, but now I errors. Do you have any idea how to proceed best? Thanx in advance.
Log (01.08.2014):
Cannot complete the install because of a conflicting dependency. Software being installed: SAP HANA istration (Developer Edition) 1.81.3 (com.sap.ndb.studio..feature.devedition.feature.group 1.81.3) Software currently installed: SAP HANA Studio 1.0.48.201301130825 (com.sap.ndb.studio.product 1.0.48.201301130825) Only one of the following can be installed at once: SAP HANA Studio – Base Model 1.0.48.201301130825 (com.sap.ndb.studio.model.base 1.0.48.201301130825) SAP HANA Studio – Base Model 1.81.3 (com.sap.ndb.studio.model.base 1.81.3) Cannot satisfy dependency: From: SAP HANA istration (Developer Edition) 1.81.3 (com.sap.ndb.studio..feature.devedition.feature.group 1.81.3) To: com.sap.ndb.studio..feature.feature.group [1.81.3] Cannot satisfy dependency: From: SAP HANA Studio istration 1.81.3 (com.sap.ndb.studio..feature.feature.group 1.81.3) To: com.sap.ndb.studio.foundation.feature.feature.group 1.0.0 Cannot satisfy dependency: From: SAP HANA Studio – istration Feature 1.0.48.2013011308258k8YFZMFG0V1LdvJJeajhgxWmha2 (com.sap.ndb.studio.feature.feature.group 1.0.48.201301130825-8k8YFZMFG0V1LdvJJeajhgxWmha2) To: com.sap.ndb.studio.model.base [1.0.48.201301130825] Cannot satisfy dependency: From: SAP HANA Studio – Foundation 1.81.3 (com.sap.ndb.studio.foundation.feature.feature.group 1.81.3)
To: com.sap.ndb.studio.model.base [1.81.3] Cannot satisfy dependency: From: SAP HANA Studio 1.0.48.201301130825 (com.sap.ndb.studio.product 1.0.48.201301130825) To: com.sap.ndb.studio.feature.feature.group [1.0.48.2013011308258k8YFZMFG0V1LdvJJeajhgxWmha2] o
Like(0)
o
Former Member Post author August 1, 2014 at 2:04 pm
Welcome to Eclipse !!!
There is a conflict with the HANA studio. Do you have HANA studio installed too?
Try starting with Step #2 from above ie., Help –> Install new software within Kepler version of Eclipse. When you start the kepler, please check if you already see the ABAP perspective, if not you can always install the updates providing the update site (at Work with) as https://tools.hana.ondemand.com/kepler
Let me know how this works.
Cheers Senthil
Like(0)
Former Member August 1, 2014 at 2:29 pm
Thank you Senthil for answering. Yes I have HANA Studio installed and before I proceed like you suggest in your answer I would like to clarify another issue.
My Studio version is 48, but I need 80. When I try the update (as described in ‘SAP_HANA_Studio_Installation_Update_Guide_en’) I get the message: “No updates”. On the other hand on this location SAP | HANA Developer Edition I see that need version 80 is available.
One solution would be to uninstall and reinstall HANA Studio, but considering that I would then also have to go through the whole process of reinstalling Eclipse and any other ‘installed software’ manually this seems really like too much.
What do you recommend? It surely must be possible to get the HANA Studio update to work properly, or?
Like(0)
Former Member Post author August 1, 2014 at 5:39 pm
The ABAP Perspective is from Eclipse Kepler. You can uninstall HANA studio and go with Eclipse Kepler (see above s section above) to get the ABAP Perspective. This should meet your requirement to develop UI5 as well. I think you got mix-up with Hana Studio and Eclipse Kepler.
Like(0)
Former Member August 1, 2014 at 7:35 pm
There are so many tools out there that I am a bit lost.
My objective is to to develop in SAP HANA directly, but I also need the ability to consume views with ABAP.
What do I need HANA Studio for? Can Eclipse do everything that HANA Studio can?
Do I need to install the SAP GUI as indicated by you above? If yes, how can I it without an S-?
Like(0)
Former Member Post author August 1, 2014 at 8:05 pm
I could understand the confusion and this is usual only. One thing you need to know is technically it is all ONE platform. Technically all are eclipse, the key is you need to have ABAP on HANA (writing DB procedures) and HANA Tools need to be installed. For this I started of with Kepler and it worked. In fact I have HANA studio also installed, so both can (and will) coexist (although you need to choose different workspaces for better management). Go ahead start afresh installation uninstalling Hana studio. Yes, you need to have SAP GUI installed, because this is required for ABAP editor to be displayed in Eclipse. Trust this helps! Cheers
Like(0)
Former Member August 1, 2014 at 8:09 pm
Thank you for your anwer. Do you know how I can the SAP GUI without an S-?
OR
how I can get an S- in order to the SAP GUI?
Like(0)
Former Member August 1, 2014 at 10:27 pm
Thanx for the hint and the link. In order to apply for an S- it still seems as if you have to be a SAP customer. I am developing on my own installation of AWS HANA and hence have no customer/partner number and cannot apply through the link you provided
… that is unless you know something I do not.
Like(0)
Former Member August 3, 2014 at 9:35 pm
Seems as if I be getting an S-. Thanx for your help.
Like(0)
Jens Weiler August 4, 2014 at 9:11 am
Hi Martin,
easiest way (and no S- is needed) is to a “naked” Eclipse Kepler from the Eclipse Site and afterwards add the needed Plug-Ins from this site SAP Development Tools for Eclipse
Here you can get the latest HANA Studio and ABAP Development Tools (and even more).
Hope this helps.
Cheers
Jens
Like(0)
Former Member August 5, 2014 at 7:59 pm
Hi Senthil, Nice blog, I have a question , if I wnated to consume HANA based service in SAP ABAP , what is the setup I need? is it similar to what you have mentioned above?
I need to consume some data from HANA system and used it on ABAP report. If you could give some thought around this topic that would be agreat help.
Specific to : what is the version of SAP NW ABAP , Eclipse and HANA Studio I shoud ahve Thanks Krishna o
o
Like(0)
Thomas Gauweiler August 6, 2014 at 6:49 am
Dear Krishna, In fact you call choose also the HANA studio parts when you install ADT into your eclipse. You can then access both HANA directly as well as ABAP from the same eclipse.
How to consume the HANA based service in ABAP depends on the kind of service of service. Starting with ABAP 740 SP05 we recommend CDS Views and AMDP (ABAP Managed Database Procedures) to access HANA specific services.
The HANA studio version should be the same as the HANA database. ADT can always be the newest version as it checks the features of each connected ABAP backend.
Best Regards, Thomas
Like(0)
SAP Seeker August 23, 2014 at 6:25 pm
Dear Thomas,
As per this blog, we should have SAP GUI 7.2 with patch 9 installed in our system to access the server and write ABAP programs. Same way, should we have something like HANA Studio/Client installed to access them ? I am a beginner. Please guide.
Thanks and Regards, Seeker.
Like(0)
Thomas Gauweiler August 25, 2014 at 6:19 am
No, there is nothing needed in addition. Just use the eclipse update site.. Best Regards, Thomas
Like(0)
Sharmila Subramanian August 6, 2014 at 8:07 am
Hi Senthil,
Nice blog that illustrates the installation clearly.
Regards, Sharmila o
Like(0)
o
Former Member Post author August 15, 2014 at 11:06 pm
Thank you for your comments
Regards
Senthil
Like(0)
Sreehari V Pillai August 25, 2014 at 7:04 am
good info . Thanks o
Like(0)
Former Member September 3, 2014 at 9:19 pm
Pls am a novice and intend to learn SAP. what are the tools i need to install and study materials?
Cheers o
Like(0)
Former Member September 8, 2014 at 7:39 pm
Thanks for a wonderful write up, waiting for next ones. o
Like(0)
Former Member October 1, 2014 at 3:21 am
Hello Senthil,
Thanks for nice blog. I have installed Eclipse Luna and created the Hana Instance from AWS. As configuration is required in Eclipse, for Hana and SAP GUI. Currently i do not have SAP. Can you suggest, any link to SAP GUI, which can be used with Eclipse and steps for linking AWS & Eclipse. Appreciate if you can provide any information on this.
Regards, Amrit o
Like(0)
o
Former Member Post author October 1, 2014 at 6:37 pm
@Amrit You can also manually define projects in Eclipse Luna to use AWS HANA instance.
Refer this link if you need more details. I’m not sure if it is yet ed for Luna, but you can check. Hope this helps.
Regards Senthil
Like(0)
Former Member October 17, 2014 at 7:57 am
Hi Senthil,
Thanks for the informaton. It was realy helpful for me. Nicely described the steps through screenshots. o
Like(0)
Former Member November 6, 2014 at 12:49 am
Hi Senthil, Thank you! I followed your steps but I can`t load the repository. I think that my site blocks that address.
Error Msg. is below. “Unable to read repository at https://tools.hana.ondemand.com/kepler/content.xml. Unable to read repository at https://tools.hana.ondemand.com/kepler/content.xml. peer not authenticated”
Is there any solution?
Regards. o
Like(0)
o
Former Member Post author November 6, 2014 at 1:33 am
It has only to do with the way you access Internet, that should fix this issue. The site is up and running ! Try running from a different site or network ..
Good luck !
Like(0)
Former Member September 14, 2016 at 8:20 am
Neon eclipse can retrieve components by url https://tools.hana.ondemand.com/neon . But on the same machine , mars cant do it by url https://tools.hana.ondemand.com/mars So it seems that the network is not the only reason . Right ?
Like(0)
o
Former Member September 14, 2016 at 2:29 am
Dear friends,
Have you solved the problem ? I installed the mars eclipse version . When It fetches 50%, a “problem Occurred” popup dialogue appears ,saying that “Unable to connect to repository https://tools.hana.ondemand.com/mars/content.xml org.eclipse.equinox.p2.core.Provi sionException” .
If you solved this problem , can you tell me how to do ?
Like(0)
Former Member November 9, 2014 at 1:45 pm
hi senthil
Nice Document hleped in double checking my installation.
I have installed Hana studio latest then added the ADT.
I could create a CDS View and also wrote a report trying to execute that view.
But it throws an error cx_salv_dbtable_not_ed
what could be the issue
thanks and regards arun o
Like(0)
o
Former Member Post author November 9, 2014 at 7:23 pm
Arun
I do not have full details from the above posting, but one thing I can see here is about your scenario.
This is a database NOT ed message. There are some scenarios that are specific to DB, for e.g., in your case the underlying database is not ed for the ALV operation you’re performing. please check..
Good luck !
Like(0)
Former Member November 10, 2014 at 3:30 am
Hi Senthil
Thnaks for the the reply.
It was a syntax error.
Thanks and regards
Arun
Like(0)
Sneha Jadhav November 10, 2014 at 5:25 am
Hi Senthil,
I have followed all the above mentioned steps but while configuring the SAP backend for ABAP development I have selected the system and provided the credentials with the client information to , I got following error: ” Logon to system failed (System does not Eclipse-based ABAP Development Tools)”.
Please help me with this.
Thanks. o
Like(0)
o
Former Member Post author November 11, 2014 at 3:43 pm
Hi Unfortunately, Eclipse needs some minimum versions to connect, please check your system version. Your backend ECC ABAP should be 7.03/ 7.31 SP4 (SAP_ABA, SAP_BASIS comps) and above please check your system–>status, good luck!!
Like(0)
Sneha Jadhav November 12, 2014 at 9:23 am
Hi, Thank you for the reply. I have 1 doubt regarding back end system. Do we need dual stack system (java and ABAP) or will it work on ECC ABAP system only. o
Like(0)
o
Christian Lechner November 12, 2014 at 3:51 pm
Hi,
there is no need for teh Java Stack in your system. The stuff described here is working in an ABAP ECC standalone system. But please be aware that there are some requitrements concerning the Netweaver release of the ABAP stack
BR Christian
Like(0)
Former Member November 15, 2014 at 10:43 am
Hi Senthil,
Excellent documentation. I had all the setup and the tools ready but couldn’t figure out a way where I could connect to the ECC through Eclipse.
One quick question, in the above steps, only when we create a new ABAP project is it prompting for the connection and the system. Is it possible to permanently establish the connection somewhere? Also, instead of creating a new ABAP Project, is it possible to open some existing ABAP reports on the ECC system?
One more doubt, slightly off topic, in the same way, can we also connect to the ECC system to develop Fiori apps? If so, is it also through the ABAP perspective and what else tools do we need to from the SAP link?
Thanks a lot in advance.
Regards,
George Abraham o
Like(0)
o
Former Member Post author November 15, 2014 at 12:41 pm
Hi George
Connectivity to ECC is via Eclipse project as the same tool (from a larger development view) Eclipse can be used for multiple development (UI5, ABAP, etc.,). The reason it is prompting for connection and system and why we cannot store it is also same. Secondly, you can open all your existing ABAP development objects in ECC system as once you’re connected to ECC system ADT brings up the entire SAP GUI to your use, you can even execute tcodes just like as if you’re in SAP GUI.
On Fiori, the UI5 shell component and Gateway has to be enabled in ECC system (prereq. for deploying Fiori apps). For development, you can use the same ADT tool and open a different project type (UI5 Application Development) in Eclipse.
Hope this clarifies..
Good luck ! Senthil Muthuvelu
Like(0)
Former Member November 21, 2014 at 7:02 am
Thank you Senthil for the clarifications. Yes, I have already started working on the same
Like(0)
Former Member January 4, 2015 at 8:57 am
Hi All,
Eclipse is already installed in my system. But I am unable to access my backend system.
For normal log on I need to enter my token number and RSA is activated in GUI. And also ” Maximum settings available” option is on.
So are there any settings in ECLIPSE for logging in using Token?
Thanks in Advance.
Regards, Praveen o
Like(0)
o
Former Member Post author January 4, 2015 at 3:05 pm
Hi Praveen
Follow the same procedure, using the RSA in normal logon pad, then access Eclipse.. there is no settings in Eclipse /plugin to access RSA token.. Because RSA is only a VPN connectivity to establish network connection.. so as long as you access Network and the backend, it should work.. Cheers Senthil !
Like(0)
Former Member April 14, 2016 at 11:15 am
I m Getting this …
Former Member January 13, 2015 at 3:14 pm
Thanks! o
Like(0)
Like(0)
Former Member January 27, 2015 at 1:32 pm
Thank you very much for sharing. o
Like(0)
Bert Brouns February 16, 2015 at 12:46 pm
Thanks, nice blog o
Like(0)
Former Member March 17, 2015 at 6:43 am
Great blog. keep it going… o
Like(0)
zongjie zhang March 17, 2015 at 7:54 am
Thanks for sharing. But after I install all the software, when I try to connect the sap logon (EGD system). but it say EGD did’t the eclipse. My sap gui is 730 o
Like(0)
zongjie zhang March 17, 2015 at 7:55 am
Thanks for sharing. But after I install all the software, when I try to connect the sap logon (EGD system). but it say EGD did’t the eclipse. My sap gui is 730 o
Like(0)
Avinash M March 17, 2015 at 10:15 am
I am getting error, below is the snap .
any help?? o
Like(1)
o
Thomas Gauweiler March 17, 2015 at 12:24 pm
You can find at SAP Development Tools for Eclipse the links for the missing Microsoft runtime DLLs. Regards, Thomas
Like(0)
Avinash M March 18, 2015 at 4:14 am
this got a serious issue. I am getting same error after installing missing dll. . going back to sap logon pad.
Like(0)
Jasmin Gruschke March 18, 2015 at 5:46 am
Hey Avinash, please post a question to the ADT experts in the ABAP in Eclipse forum. Cheers, Jasmin
Like(0)
Former Member November 11, 2015 at 7:22 pm
Avinash, the SAP documentation for ADT is quite clear to inform you what is the pre-requisite to check. The error message is actually quite clear.
–Steve–
Like(0)
Roland Kramer March 18, 2015 at 12:21 pm
Hi, See also the Document – SAP First Guidance – Implementing BW-MT for BW-aDSO which adds the BW-MT Implementation as well.
Best Regards Roland o
Like(0)
Srinivasan Vinayagam April 21, 2015 at 8:25 am
Hi Senthil,
Nice document. Thank you for sharing. Please share some real time example. where we implement the this.
Regards, V Srinivasan o
Like(0)
prabhith prabhakaran April 23, 2015 at 8:50 am
Senthil Murugan Muthuvelu,
Really Nice documentation. was able to configure in my environment without any issues.
Thanks a lot.
BR Prabhith o
Like(0)
Former Member May 15, 2015 at 12:27 pm
Thanks Senthil Murugan Muthuvelu ,its a nice document for everyone . o
Like(0)
Timothy Muchena May 28, 2015 at 9:59 am
Hi
Do you know which tools(kepler or luna) I should use to install ABAP plugins in the HANA studio?
Thanks and kind regards o
Like(0)
o
Former Member May 30, 2015 at 2:28 am
Both the Eclipse version would work fine but go for Luna i suggest.
Like(0)
Jorge Celedon June 2, 2015 at 5:52 pm Thanks for this detailed description of the installation process.
o
Like(0)
Former Member June 15, 2015 at 7:31 am
nice document o
Like(0)
Former Member August 8, 2015 at 11:42 am
hi senthil i already done with installation of abap and ui5 in eclipse but i don’t have sap logon credentials so for credentials where i have to plz help me..
Regards.. Swapnil
o
Like(0)
AMIT Lal September 11, 2015 at 5:28 pm
Thanks for steps document o
Like(0)
Amit Diwane October 28, 2015 at 7:33 am
Nice Article. o
Like(0)
Daniel N. Coelho December 10, 2015 at 1:45 pm Nice documentation. Thank you
o
Like(0)
Former Member February 25, 2016 at 1:14 pm
how to know which abap package I am currently using. I mean is it ABAP 7.4 SP05/SP02
Thanksin advance o
Like(0)
o
Former Member February 25, 2016 at 2:04 pm
Prashant, can you clarify what exactly is your question? If you want to know what ABAP SP level, you go to your system and go to System –> Status on toolbar.
–Steve–
Like(0)
Former Member February 26, 2016 at 5:01 am
thanks steve
Like(0)
Former Member March 8, 2016 at 1:45 pm
Can you please on your SAP Website offer the Eclipse p2 repository https://tools.hana.ondemand.com/mars/ as zip ? We have computers that are not connected to the Internet. thank you. o
Like(0)
o
Former Member September 14, 2016 at 2:11 am
Have you got hana studio plugin ? It is strange that I face the problem you described.
Like(0)
Former Member April 11, 2016 at 5:52 am
very helpful , thank you. o
Like(0)
Mateusz Nowak April 12, 2016 at 12:22 pm
Thank You for this step by step guide! o
Like(0)
Former Member April 14, 2016 at 11:13 am
I am getting this error…. o
Like(0)
o
Former Member April 14, 2016 at 1:11 pm
Parwez, were you able to to SAP just using your SAPGui without initially going thru’ SAP HANA Studio?
–Steve–
Like(0)
Former Member April 14, 2016 at 3:35 pm
Hi Steve Yes I can use using SAPGui.
Like(0)
Former Member April 14, 2016 at 3:40 pm
Parwez, yes you can to EA1 using the SAPGui without going thru’ SAP HANA Studio? Is that your answer?
–Steve–
Like(0)
Former Member April 14, 2016 at 5:22 pm
Yes,but by using eclipse kepler I’m unable to showing above error.
Like(0)
Former Member August 12, 2016 at 12:56 pm
Parwez, you might want to check your proxy settings. This might prevent you from doing that. Good luck.
Steve
Roland Kramer April 16, 2016 at 11:08 am
Like(0)
Did you also check this Document – SAP First Guidance – Implementing BW-MT for BW-… | SCN Best Regards Roland o
Like(0)
Former Member May 27, 2016 at 3:21 am
Hi Senthil,
It’s really a nice blog and I made it successfully according to it. I got a question what’s difference between AiE and directly logon via GUI?
Regards Xuebin o
Like(0)
Amanda Triplett July 19, 2016 at 12:43 am
Thank you for this step by step document. It is very helpful. o
Like(0)
Christoph Volkert August 16, 2016 at 10:55 am
Hello,
i need to install Eclipse with ADT on a lot of machine. Eclipse itselfs runs fine from a shared folder, but every single on every computer needs to and install ADT by itself. Thus blocking our Internet with massive bandwidth consumption and destroying a lot of work time. Could you please tell me how to set up the ADT-repository inside the network or how to deploy a complete install of Eclipse (together with ADT)?
Thank you a lot. Im working on this problem now for a lot of time and didn’t get a working result. Last i tried was the dropins-folder, but that doens’t worked also, maybe i missed some. o
Like(0)
o
Thomas Fiedler August 22, 2016 at 9:45 am
Hi Christoph, the easiest way to provide eclipse in a big landscape initially is via a zip File that contains eclipse + the ABAP tools. Updates can be provided by the updatesites. You can setup your own corporate update site. Details can be found here: Learn How to Configure an Update Site for Providing Installation Packages of ABAP Development Tools
Does this help ?
Regards, Thomas.
Like(0)
Former Member September 9, 2016 at 2:55 am
the url https://tools.hana.ondemand.com cant help me retrieve the hana studio plugin . Is it changed now ? o
Like(0)
o
Thomas Fiedler September 13, 2016 at 1:20 pm
No, there are still there:
SAP Development Tools
Regards, Thomas.
Like(0)
Former Member September 14, 2016 at 2:39 am
Thank you Thomas ,
I followed the instructions in the link you provided . The prerequisite and the procedures are right . When I try to get the hana studio plugin , it will popup a dialogue ,saying that “Unable to connect to repository https://tools.hana.ondemand.com/mars/ content.xml org.eclipse.equinox.p2.core.ProvisionException ” .
So I am confused .
Regards
Jessica
Like(0)
Thomas Fiedler September 14, 2016 at 6:41 am
Hi Jessica, you should switch to Eclipse Neon und use the /…./Neon Updatesite. In parallel I will clarify what’s wrong with Mars Updatesite.
Regards, Thomas.
Like(0)
Former Member September 14, 2016 at 7:49 am
Dear Thomas,
Ok, I just tried that Neon is ok , Mars does not work in the same machine . Thank you Thomas.
I have a task on mars recently , so kindly ask you to tell me about the solution to mars .
Million thanks
Regard Jessica
Like(0)
Thomas Fiedler September 14, 2016 at 7:53 am
Hi, what do you mean with ‘I have a task on Mars’ Can’t you switch to Neon?
Regards, Thomas.
Like(0)
Former Member September 14, 2016 at 8:09 am
Dear Thomas ,
Yeah, I must test a special feature of hana on mars .
I know that there is another way to get hana studio plugin , but I do not understand the meaning of each word . it says that ” If you have a HANA server running and the HANA XS engine has been enabled ,specify the update site location with http://
It is strange that I tried every possible directory , They can’t obtain hana studio plugin either .
So , what’s the meaning of ‘/sap/hana/studio’ ?
Do you know that ?
Thank you Thomas
Regards, Jessica
Like(0)
Former Member September 14, 2016 at 12:07 pm
Jessica, I think what Thomas is saying can’t you switch to use Eclipse Neon instead of Mars. I have the same problem in the ing it. Someday I can and some days I can’t. Can you check your company firewall and work with your network folks to have fully open for that site just to test the connection ? If it works then slowly tighten up your network security. Also, on your internet browser, did you allowed the mars site for ? Good luck
Steve
Like(0)
Former Member September 18, 2016 at 2:58 am
Dear Steve ,
I have checked the issues that you suggested .
Today , I just find why my mars eclipse can’t do the same thing . On mars eclipse Active Provider in Network Connections configuration is set as manual , while on neon is set as native . After I changed this configuration on mars , it can obtain hana studio plugin successfully .
Thank you for the tips .
Sincerely Jessica
Like(0)
Former Member September 18, 2016 at 3:03 am
Dear Thomas ,
Here I want to give you a good news of me . I retrieve the studio plugin successfully on mars now ! It happens after I change the Active Provide in Network Connections to ‘native’ , instead of ‘manual’ .
Ah, what’s the difference between them ?
Sincerely Jessica
Like(0)
Felix Otto September 19, 2016 at 7:31 am
Hi Jessica,
that’s what the Eclipse Help says about the possible “Active Provider” options:
Specifies the settings profile to be used when opening connections. Choosing the Direct provider causes all the connections to be opened without the use of a proxy server. Selecting Manual causes settings defined in Eclipse to be used. On some platforms there is also a Native provider available, selecting this one causes settings that were discovered in the OS to be used.
Regards, Felix
Like(0)
Former Member September 19, 2016 at 8:07 am
Thank you Felix ,
I am quite clear now . I guess something is wrong with the proxy setting .
Thank you all . You are so kind .
Regards Jessica
Like(0)
Former Member March 29, 2018 at 5:36 am
Can someone help me with these errors:
An internal error occurred during: “ABAP occurrence markers”. annotationDefs An internal error has occurred. Could not initialize class org.eclipse.ui.internal.progress.ProgressInfoItem An internal error has occurred. Could not initialize class org.eclipse.ui.internal.progress.ProgressInfoItem
o
Like(0)
Former Member May 16, 2018 at 1:50 pm
Hi,
I have the error ” An internal error occurred during: “ABAP occurrence markers”. annotationDefs”. eclipse.buildId=unknown java.version=1.8.0_77 java.vendor=SAP AG BootLoader constants: OS=win32, ARCH=x86_64, WS=win32, NL=en_US Command-line arguments: -os win32 -ws win32 -arch x86_64 org.eclipse.core.jobs Error Wed May 16 08:13:48 CDT 2018 An internal error occurred during: “ABAP occurrence markers”. java.lang.NoSuchFieldError: annotationDefs at com.sap.adt.cds.ddl.internal.parser.versions.AbstractAbapDdlParser.onCommitMatch(AbstractA bapDdlParser.java:449) at com.sap.rnd.rndrt.resolver.base.TokenCoCoParser.onCommitMatch(TokenCoCoParser.java:181) at com.sap.rnd.rndrt.resolver.base.Parser.vmMatch(Parser.java:1090) at com.sap.rnd.rndrt.resolver.base.Parser.replay(Parser.java:2872) at com.sap.rnd.rndrt.resolver.base.Parser.commitAndReplay(Parser.java:2359) at com.sap.rnd.rndrt.resolver.base.Parser.vmSys(Parser.java:2563) at com.sap.rnd.rndrt.resolver.base.Parser.run(Parser.java:1815) at com.sap.rnd.rndrt.resolver.base.Parser.run(Parser.java:192) at com.sap.rnd.rndrt.resolver.base.TokenCoCoParser.run(TokenCoCoParser.java:355) at com.sap.cds.ddl.internal.parser.AbstractDdlParser.run(AbstractDdlParser.java:180) at com.sap.adt.cds.ddl.internal.parser.versions.AbstractAbapDdlParser.run(AbstractAbapDdlParser. java:3666) at com.sap.cds.ddl.internal.parser.DdlRndParserApi.runParserForTokenQualification(DdlRndParser Api.java:337) at com.sap.cds.ddl.internal.parser.DdlRndParserApi.parseSource(DdlRndParserApi.java:325) at com.sap.adt.cds.ddl.ui.internal.editors.pages.DdlTokenOccurrenceFinder.findOccurrences(DdlTo kenOccurrenceFinder.java:50)
at com.sap.adt.tools.abapsource.ui.internal.occurrence.OccurrenceHandler$OccurrencesFinderJob. run(OccurrenceHandler.java:678) at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)
Any help would be appreciated.
Simple Finance: TECH SPEAK Follow RSS feed Like 0 Likes 84 Views 0 Comments
SAP Simple Finance is an add-on to ERP powered by SAP HANA and is known as S/4 HANA.S/4HANA is adding HANA capabilities to ECC or R/3 ERP functionality. Hence this allows ERP optimized to run on HANA which is In-memory column based database. SAP provides options for both On-premise installation and cloud based. Experience can be enhanced using SAP Fiori which is a Graphical interface. ABAP is still the language for developers but would need some minor changes in order to write column based optimized code. Custom ABAP code plays often an important role for these main business processes. All details how to implement and benefit from the ABAP SQL Monitor can be found in the attached ABAP SQL Monitor guide. sFin is another name for Simple Finance which includes SAP Cash Management and SAP Integrated Business Planning (IP and BPC and embedded BW) for Finance. Since this is an evolving product not all solutions are yet integrated with Sfin2.0 so evaluate carefully before recommending the move to simple finance.
1. SAP enhancement package 7 for SAP ERP 6.0 is a pre-
requisite. 2. Totals tables and application index tables have been removed and replaced with CDS views with the same technical names. Assess impact on your RICEF objects, authorization profiles, and HANA database 3. Migration to New Asset ing module is must 4. SAP cash Management and Integrated Planning would require SAP Fiori
5. based COPA is activated by default and no impact to 6. 7. 8. 9. 10. 11.
Costing based COPA The experience is likely to change with Universal Journal Secondary cost elements have to be created as GL s Important SAP Notes no’s 1925902, 1968568 Introduction of Central Finance (CFS) No solution available yet for Data Archived HANA tools do not hierarchies
Below is the list of table names replaced by their CDS views: The line item, totals tables and application index tables of General Ledger ing (GLT0, BSIS, BSAS and FAGLFLEXA, FAGLFLEXT, FAGLBSIS, FAGLBSAS) The totals tables and application index tables of s Receivable and s Payable (KNC1, KNC3, LFC1, LFC3, BSID, BSIK, BSAD, BSAK) The line item and totals tables of Controlling (COEP for certain value types, COSP and COSS) The material ledger tables for parallel valuations (MLIT, MLPP, MLPPF, MLCR, MLCD, CKMI1, BSIM) The Asset ing tables (ANEK, ANEP, ANEA, ANLP, ANLC)
SAP does not anticipate any impact to your existing infrastructure when you move to sFin as long as you are performing the Read function. If you are performing a write function into the existing tables they would be impacted.
Shakeel Ahmed January 31, 20183 minute read
SAP ERP to S/4 HANA Migration Scenarios Follow RSS feed Like
9 Likes 17,987 Views 5 Comments
# Purpose of this Article There have been multiple scenarios while it comes to SAP (ECC) ERP migration to SAP S/4 HANA. It is important to understand customers current landscape and used functionalities and modules in current SAP landscape/system to determine the appropriate S/4 HANA migration scenario. Determination of migration scenario is so important that based on this understanding only scope, team size and project valuation (bidding value) can be determined. For example, there could be multiple phases (sub projects) in one simple e.g. ECC6, EhP7 migration to S/4 HANA 1709.
Identification of appropriate migration scenario would help you finalizing following things: 1. Magnitude of Work (Scope) 2. Number of Project Phases 3. Team Size Requirement 4. Project Amount (Bid Amount) Mainly this article is for sales team involved in approaching customers for SAP migration. I hope it helps them. Note: This article is mainly for SAP consultants/management who are market goers (Sales Team). Please get your basics strong before committing anything about S/4 HANA Migration. In this article we would be focussing on Scenario 6 and Scenario 7. Other Scenarios will be covered in future articles. Note: This document is prepared considering that first, the migration will take place from ECC environment and required additional functionality would be activated in the migrated S/4 HANA 1709 environment. With this your customer would be in your hand. # SAP S/4 HANA Migration Scenarios
Note: A new scenario has been evolved in S/4 HANA 1709 for customers who are already in SAP ERP with HANA1 (Suite on HANA) or S/4 HANA with HANA1 (S/4 HANA Finance 1503, 1605 and S/4 HANA 1511, 1610) and want migrate to S/4 HANA 1709 (which is on HANA2). Migration has to be done in two phases: Phase1: SAP ERP o HANA (Suite on HANA) to SAP ERP HANA2 (Suite on HANA2) Phase2: S/4 HANA with HANA1 (S/4 HANA Finance 1503, 1605 and S/4 HANA 1511, 1610) to S/4 HANA 1709 (1709 is on HANA2)
# S/4 HANA Migration Concepts (Doc. Splitting and Parallel Ledger/ing/HANA2) Following points help you determining migration scenario in respect to scenario 6 and scenario 7: 1. There is no concept of ‘New GL or ‘Classic GL’ in S/4 HANA 2. New GL is not a pre-perquisite for migrating to S/4 HANA, you can migrate to S/4 HANA from classic GL 3. Migration from Classic GL to S/4 HANA 1610 (1503, 1511, 1605 and 1610) was possible, but subsequently document splitting was not possible and due to this SAP recommendation was to activate first New GL (Ledger introduction and document splitting) and then migrate to S/4 HANA 4. Migration from Classic GL (without activating to New GL) to S/4 HANA 1709 is possible, additionally, now subsequent document splitting and ledger introduction is possible in S/4 HANA 1709. This is the reason, now there is no need of doing a project for New GL activation in ECC environment. 5. Need to keep in mind that there might be possible three separate projects for converting ECC on classic GL to S/4 HANA with document splitting and parallel ing (additional ledgers). 6. Subsequent Ledger (Parallel ing) introduction was possible from SAP S/4 HANA Finance SAP 1605 and S/4 HANA 1610. 7. A new scenario has been evolved in S/4 HANA 1709 for customers who are already in SAP ERP with HANA1 (Suite on HANA) or S/4 HANA with HANA1 (S/4 HANA Finance 1503, 1605 and S/4 HANA 1511, 1610) and want migrate to S/4 HANA 1709 (which is on HANA2). Migration has to be done in two phases:
# Project Phases for Migrating SAP ECC System to S/4 HANA 1709 Considering there is one SAP ECC customer with classic GLs and he wants to move to S/4 HANA 1709. He also wants have functionality such as document splitting and parallel ing (additional ledgers).
Phase 1: ECC Migration to S/4 HANA a. Preparatory Phase System Requirement (Unicode Conversion) Maintenance Planner Pre-Checks Custom Code Pre-Parathion b. Technical Migration (SUM)
Database Migration Software Upgrade Data Conversion
c. Delta Customization d. Data (Functional) Migration (Migration Cockpit) e. Testing f. Go-Live
Phase2: Activation of Parallel Ledger (Non-Leading Ledger Introduction) SAP has two approaches to meet multi GAAP reporting requirements i.e. the approach and the ledger approach 1. Preparatory Phase 2. Execution Phase 3. Post – Processing Phase
Phase3: Activation of Document Splitting 1. Preparatory Phase 2. Execution Phase 3. Post – Processing Phase
(Further detailing can be obtained from this blog https://blogs.sap.com/2017/12/11/subsequentdocument-splitting-in-s4-hana-finance-1709-on-premise/#) Note: No SLO service is required for activating document splitting subsequently. Standard document splitting activation cockpit is available in IMG node in S/4 HANA 1709.
# Major/Select Changes in S/4 HANA 1709 If you are going to customer for sales pitch before that please get the understanding of ‘what is new in S/4 HANA 1709’.
New HANA Data Base i.e. HANA 2 DB Machine Learning capabilities on S/4 HANA 1709 On-Premise Expanding Core with Embedded Innovation on Core: Demand Driven Replacement, Advanced Variant Configuration, Real Time Inventory Management (e.g. Oil & Gas) New S/4 HANA Migration Cockpit New addition to SAP Fiori Lot
Related Documents 171j1w
Hana 4l5ec
October 2022 0
Hana Hani 2n3946
November 2019 36
Sap Hana 3z6r11
December 2019 111
Tfc0615 Hana 4u6c12
June 2020 5
Hana Procurement 6o581p
August 2020 0
Hana Training Session Vfinal 6576e
August 2020 0More Documents from "Adaikalam Alexander Rayappa" 59514t
Ricef Means m4c6
July 2022 0
Generate Ssl Certificates With Openssl For Sap Systems 4z482
October 2022 0
Hana 4l5ec
October 2022 0
Mt 799 Verbiage 3j30r
May 2023 0
Mt799 Blocked Funds Doa Usd 500m Scb Hk $500mil 5obb
December 2019 138