Flsmidth Hpgr Brochure Email 6m54e

HPGR - High Pressure Grinding Roll for the Minerals Industries

2

HPGR - High Pressure Grinding Roll for the minerals industries

Global Installations • Canada

2

• China 6 • Columbia

1

• Denmark

2

• India 9 • Indonesia

10

• Korea 6 • Malaysia

1

• Saudi Arabia

3

• Thailand

7

• Turkey 2 • United Kingdom

1

• USA 2

FLSmidth is a world wide supplier of HPGRs. HPGR technology has been used in the cement industry for many years, and due to the success and effectiveness of this machine FLSmidth has invested in the development of HPGR technology for minerals industries specifically to hard rock applications such as copper, gold, iron ore, and many others.

If HPGRs are run correctly ball mills can be downsized and use smaller grinding media which will reduce steel ball consumption in the BM circuit substantially.

HPGR equipment is a modern and very energy-efficient comminution technology. During its relatively short history, HPGR technology has undergone significant development with machine roll wear surfaces & control philosophy.

A flexible solution The HPGR is a flexible solution, highly suitable both for upgrades and for new installations. Upgrading may increase capacity by up to 80 percent, while the total specific energy consumption of new installations may be reduced by 20-30 percent compared with conventional grinding systems. The most typical process configurations are described on pages 9-13.

The HPGR, developed by FLSmidth, ranks among the most advanced and efficient units available. Its design incorporates the vast experience and expertise gained since HPGR technology was first introduced.

How it works & benefits In high-pressure grinding roller comminution the feed material is exposed to very high pressure for a short time. The high pressure causes the formation of microcracks in the feed particles and generates a substantial amount of fine material. The pressed material can be fed directly to a given size ball mill, making it possible to increase the throughput of a given size ball mill and reduce the specific power consumption of the whole mill system.

HPGR also promotes micro fracturing to expose minerals encased within the particular ore which increases liberation via recovery.

Besides the cost-saving features already mentioned, the HPGR is characterised by: • Long wear part life • Low operational and maintenance costs • Short shutdown for wear part replenishment

3

Features

Advanced skew control The FLSmidth HPGR press incorporates roller skew control via the hydraulic power unit. This system keeps the two roller assemblies parallel during operation, thus reducing grinding pressure deviation across the roller width which in-turn increases the consistency of the grinding process.

Gabled frame A gabled frame allows for easier maintenance and replacement of the roller assembly.

Tramp control The FLSmidth HPGR includes a new to the industry, patent-pending hydraulic system capable of accommodating large shocks. This system helps protect the critical roller surface from incidents such as tramp metal bytream metal detectors.  The FLSmidth system utilizes a specially configured hydraulic accumulator which instantly activates without a PLC needing to shift hydraulic valves.

Step 2: 1. Swing out L-gable

Step 1: 1. Remove upper L-gable pins 2. gearboxes 3. Disconnect gearboxes

Step 3: 1. Pull “fixed roller” towards L-gable 2. Remove “fixed roller” from HPGR 3. Remove cheek plates/feed gate 4. Pull “moveable roller” towards L-gable 5. Remove “moveable roller” from HPGR 6. Install new “moveable roller” 7. Pull new “moveable roller” to position 8. Install cheek plates/feed gate 9. Install new “fixed roller” 10. Pull new “fixed roller” to position 11. Swing in L-gable

Step 1

Step 2

Step 4: 12. Install 2 upper L-gable pins 13. Reconnect gearboxes 14. Install safe guards

Step 3

4

HPGR - High Pressure Grinding Roller

6

14

4

5

3 12 11 10

13 1 2

7

8 9

1. Studded Roll

6. Two variable speed drives

10. Top frame

2. O il-lubricated spherical roller bearing

7. H ydraulic pressurising cylinders

11. Feed Gate

3. P lanetary reduction gear

8. N itrogen-filled bladder accumulators

13. Elastomer shear pad

9. Bottom frame

14. Feed Chute

4. T orque arm arrangement 5. S afety release coupling

12. Hinged L-shape end section

5

Product Range F150

F360

F600

F900

F1250

F1600

F2000

F2500

F3000

F3600

F4200

F5000

Area, m2

0.15

0.36

0.60

0.90

1.25

1.60

2.00

2.50

3.00

3.60

4.20

5.00

Diameter, m

0.58

0.9

1.17

1.36

1.48

1.6

1.74

1.92

2.12

2.3

2.5

2.7

Width, m

0.26

0.4

0.51

0.66

0.85

1

1.15

1.3

1.41

1.57

1.68

1.85

Feed particle size, F100, mm

25

27.5

30

35

37.5

40

45

50

55

60

65

70

Product Specifications Surface speeds

0.8m/s to 2.4m/s

Motor power

100kw to 5800kw

Throughputs

100t/h to 3000t/h

Specific press forces

3000Kn/m2 to 5500Kn/m2

Roll Configurations

6

Main component description

bearing housings prevent the rollers from touching each other when pressurised without feed and permit adjustment of the minimum gap.

Drive configuration

The frame The frame is built up of parts fitted together by removable pins. The upper and lower frame, linked by vertical end sections, together form a horizontal U-frame. The U-frame is closed by an L-shape end section that is hinged to the lower frame and folds down for easy removal of the roller assemblies. This frame encloses and s the bearing housings of the roller assemblies and carries the hydraulic cylinders of the pressurising device. The bearing housings slide on the lower frame.

HPGR Roll exposed

The upper frame s a feed chute and the dust casing, which encloses the two roller bodies to reduce dust. Extraction parts are available in extreme cases.

Rollers One roller is fixed while the other is horizontally movable and is pressed towards the former by four hydraulic cylinders. The position of the movable roller depends on the characteristics of the material fed to the press. Spacer shims between the roller

Each of the two rollers has a separate drive. Each roller has a shaft mounted planetary gearbox connected to the other gearbox by a balanced torque arm system. The patented balanced torque arm system reduces foundation costs and complexity by taking the torque through the other gearbox and not down to the foundation. Both drives include a safety release coupling between reducer and motor. The HPGR is equipped with a hydraulic pressure system which ensures that the pressing force is kept practically even during the comminution process. In addition, it protects the press against overloading.

Roller wear lining FLSmidth’s rolls are supplied with a lining of tungsten carbide studs. The studs provides a longer roller wear life than its predecessor hard-faced smooth surfaces. In addition to the increased wear life due to this material change, the inserts also protrude out of the roller surface which assists in promoting the formation of the self protecting autogenous layer across the roller surface. This stud extension also achieves better throughputs, unlike the hard face rolls which experience slippage due to the lack of traction. FLSmidth has a dedicated research and development team that is involved in ongoing research into new and better materials to prolong the life expectance of these roll surfaces.

7

Feed control gate To facilitate control of the “choke feed” press, FLSmidth has introduced a motorised feed control gate located just above the roller surface. The feed control gate is only required for choke feed. The gate is used for smoothening the feed start and is suitable for trimming the press to optimum operation. It is also used for adjusting the throughput or power consumption of presses working with feed material of varying draw-in characteristics and/or friction characteristics.

machines. The is connected to the central control system. The is used for testing and running in the machine as well as for troubleshooting, independent of the central control system. The control includes a display that indicates status of the machine and has facilities for starting and stopping, making parameter changes, etc. The local control is delivered ready for use, thus saving engineering time during installation.

Local machine control The roller press has its own local control (PLC), similar to other complex

Feed control gate

8

Advanced wear surface concepts

FLSmidth is currently conducting a substantial amount of research and development into HPGR wear surface.

HPGR product cake

Floating roll

Discharge product conveyors

The six main areas of focus include: 1. Variations of stud compositions, to get a better understanding of the nature of the carbide to the specific ore which it is treating. 2. Compositions of the roll body base material. 3. Getting a better understanding of the formation of the autogenous build up, and the impact on the wear life of the roll. 4. Using the roll surface configuration to counter the effects of the pressure curve. 5. Installation and retention of tungsten carbide studs. 6. Understanding the relationship of optimal press force to cake formation and effective liberation without causing downstream inefficiency due to poor de-agglomeration.

9

Primary crusher-secondary cone crushing-HPGR-ball mill circuit option

This option, in comparison with conventional Primary crusher-SAGBall mill circuit, can potentially save significant amount of energy even including all the ancillary equipment (conveyors, screens, storage bins, dust collection and control system) associated with this design. This energy saving is more prominent for harder and more competent ore bodies. Furthermore the cost of steel

ball consumption associated with the SAG Mill is also eliminated. Some SAG circuits can experience huge fluctuation in mill throughput when the Run of Mine (ROM) ore hardness varies, in contrast this option that will provide a more stable feed rate to downstream process, which can be very important to flotation, leaching and other hydrometallurgical applications.

10

Pebble crushing-with HPGR incorporation option

In SAG milling applications, critical size material can build up and limit mill throughput especially for more competent ores. Typical to alleviate this, use is made of a pebble crusher and the recycle crushed product is returned back to SAG or advanced to the ball milling circuit. An alternative approach is to add an HPGR after the pebble crusher. This configuration

allows a significant portion of finer product to be generated and ed directly into the ball milling circuit. This results in a more effective usage and balancing of the available energy. As the HPGR product contains significant micro-fracturing it can help to reduce energy used in the ball milling circuit.

11

Iron Ore processing option

HPGR technology has been applied in various forms to iron ore processing. By incorporating it as one of the stages of crushing and combining it with dry magnetic separation the

downstream ball milling circuit can be reduced in size as a significant portion of harder barren silicates can be removed from the process.

12

Heap Leach concept option

For heap leach application, compared with conventional three-stage crushing, the HPGR as tertiary crushing will produce finer material with greater micro-fracturing characteristics. Tests have confirmed that the HPGR will make a more

desirable agglomeration product, which in turn will increase leach pad permeability, minimise dry spots, promote better aeration, and ultimately the potential for faster leaching rates and higher metal extraction.

13

Gold processing concept option

As HPGR interest has grown in the minerals industry, there has been growing interest in certain metal flowsheets such as gold. Due to the platy nature of gold HPGR technology

can be incorporated into a comminution circuit and allow improved metal recovery as well as potential energy savings.

14

Customer Services

Customer Services FLSmidth is your One Source for spare parts, service, maintenance, asset management, and operational services. Our Customer Services provide a wide range of services for mineral processing equipment and systems including raw material testing, process design, equipment installation, troubleshooting, process and mechanical analysis, and commissioning of new plants. Customers are our most important assets. Once we have designed and installed your processing systems, we do everything possible to provide the tools to ensure that those systems continue to operate at optimum levels, all the time. It is by no means a radical concept. Indeed, everyone promises it; we deliver it! Operations and Maintenance Our Customer Services experts have the know-how to optimise your maintenance and shutdown management programs. We can help plan your preventive maintenance programs, manage scheduled repairs, and even implement these programs for you.

Rebuilds & Modernisations Keep your equipment current with the latest advancements to enhance your operations and provide for better efficiencies. FLSmidth can rebuild your equipment or provide the most current state-of-the-art equipment improvements and/or system upgrades for operational efficiency and enhanced functionality. Quality & Reliable OEM Parts our trained service personnel to get authentic, high quality, original equipment manufacturer (OEM) spare and replacement parts for your equipment. FLSmidth is the only place to find field engineers and technicians trained specifically to deal with the unique characteristics of this equipment.

Engineering Services FLSmidth provides the services required to engineer, procure and construct in virtually every major industrial market – from Mining, Metals & Minerals to Hydrocarbon Processing and Hazardous Incineration. We have multiple full-time engineering teams trained in each discipline. These personnel use the most current resources, training and software to provide the best available solutions to your project.

15

Research & Development

Ore Characterisation & Process Mineralogy Labs FLSmidth is adding state-of the-art Ore Characterisation & Process Mineralogy Labs to their Metallurgical Services, Engineering and Plant Construction. The labs will also serve mining companies for exploration, mine site geology, expansions, feasibility studies, plant optimisation, flowsheet development, and environmental work. The laboratories are being expanded during 2011 and are targeted for startup during 1st quarter of 2012. They will be staffed with highly experienced process mineralogists and will encom the most advanced laboratory technology. This will include: • Quantitative XRD Rietveld Mineralogy • SEM and Optical Microscopy • Automated Mineral Analysis • NIR Data Base Development • Clay Analysis The labs will work in close cooperation with the existing and expanding FLSmidth Dawson Metallurgical Test Center. Mineralogical Laboratory Services will include • Ore Characterisation & Process Mineralogy • Plant Surveys • Lab Technology Development • Lab Design • Lab Automation • Training in Geo-Metallurgy

Laboratory and Tech Center HPGR client Key Test Parameters • Ore Mineralogy • Abrasion Wear Index • Specific Press Force Index • Breakage Characteristics • UCS • Specific Throughput • Metallurgical Tests • Modeling & Scale-Up Test Center Program • Exploratory HPGR Tests • HPGR Leach Tests • HPGR Float Tests • HPGR Pilot Testing of Ore Types • Customer Specific Tests

Pilot unit testing

FLSmidth Salt Lake City, Inc. Technology Center where the ore characterisation & process mineralogy labs, and other testing facilities are located.

UK

Salt Lake City

Orillia Bethlehem

www.flsmidth.com

Moscow Walluf Milan

Beijing

Mexico

Lima Votorantim

Johannesburg

Santiago

Minerals Processing Technology Center FLSmidth Salt Lake City 7158 S. FLSmidth Dr. Midvale, UT 84047-5559 Tel: +1 801 871 7000 Fax: +1 801 871 7001 Email: [email protected]

Brazil FLSmidth Ltda. Tel: +55 15 3416 7400 Email: [email protected]

Peru FLSmidth S.A.C. Tel: +51 - 1-708 0500 Email: [email protected]

Canada FLSmidth Ltd. Tel: +1 705 325 6181 Email: [email protected]

South Africa FLSmidth Pty Ltd Tel: +27 - (0)10 210 4000 Email: [email protected]

Australia FLSmidth Pty Ltd Tel: +61 2 4320 4700 Email: [email protected]

Chile FLSmidth S.A. Tel: +56 2 290 0000 Email: [email protected]

United Kingdom FLSmidth (UK) Ltd. Tel: +44 1788 555 777 Email: [email protected]

Copyright © 2011 FLSmidth A/S. ALL RIGHTS RESERVED. FLSmidth is a (ed) trademark of FLSmidth A/S. This brochure makes no offers, representations or warranties (express or implied), and information and data contained in this brochure are for general reference only and may change at any time.

Perth

Gosford

Rev. 9/2/2011 al-us

HPGR offices