Eddie Soriano 4wo12

Eddie S. Soriano

`

OBJECTIVE : To secure challenging entry level position with a dynamic organization, this will enable me to apply my skills, experience and creativity to the benefit of the organization to contribute my knowledge and skills.

Position Applied : Welder Work Experienced: Company: Address: Arabia

Zamil Steel Industries Structural Steel Division ( SSD ) P.O Box 877 Dammam 31421 Saudi Phone no. 847-1840 , Fax no. 847-1291 , Telex : 801414

Position:

Fcaw Welder

Date:

Oct 27, 2010 – Up to Present Oct 27, 2012

Duties and Responsibilities (Job Description) o o o o o o o o o o

Welding all types of Post , Beams and Plates thickness from 3mm to 90mm 1.6mm filler wire are using and CO2 for gas for all FCAW welding. We used 32-44 CFH rate flow gauge for Co2 gas based on Welding Procedure Specification (WPS ) Preheating are also applied for beam and plate when cold weather depend on thickness of beams We are have types of welding size such as 6mm , 8-10mm , 12mm , 14mm till 32mm or more for fillet weld. Oxy Acetylene cutting for plate when revised the design before welding. gauging for Ultra Test (U.T) full penetration Radiographic Test (RT) or XRAY for specific request by customers Basic blueprint reading based on design we welding. Some Customer of Zamil Steel are : Saudi Aramco , Jubail Export Refinery , Hyundai Industries, Abudabi Refinery. Riyad Refinery , GASCCO, Abu Dhabi Gas Dev Co. Limited, JGC Terminal JV Ma’aden Mine and Rifenery Project, Saipem S.p.A , Yanbu Export Refinery Project and many more.

Company: Yutaka Philippines Inc. Address: Binan Laguna. Philippines Position: Mig Welder Date: May 5, 2010 – Oct 22, 2010 Duties and Responsibilities (Job Description) o o o o

Welding of Muffler for Honda Barako and Wave 125 Motors We used 1.0mm filler wire We used Co2 or Argon for Mig welding. Quality Control personnel are strict to inspect the quality of muffler we weld.

o o o

If require to repair some muffler due to poor quality welding we repair for good quality weld. Before we start to work our team Team Leader remind us for safety precaution I also check the materials and equipment I used before I begin to work for safety.

Company: Topaz Marine Engineering Address: Dubai, United Arab Emirates Position: Smaw Welder Date: Aug 26, 2007 – Mar 03, 2010 Duties and Responsibilities (Job Description) o o o o o o o

Ship repair welding using Smaw we weld from bottom plate, side shield, diesel tank Water tank , star Hole where the storage of materials are stored we repaired and modified. Compartment where divided the rooms we repaired Most of the repaired from ship as per customers request The Supervisor is the one who assign us from different part of the ship as per authorize to work Our Company’s most customers in Dubai are U.S Navy Ship where the military is our security strict guidelines should follow one place to another military has supervision. Welding electrode we should are 6010-6011-6013 for rooting and 7018 for hot and capping from 2.4mm to 3.2mm electrode. Company: Toyota Auto Parts Philippines Address: Brgy. Pulong Sta. Rosa Laguna Position: Date:

Mig Welder Apr 23, 2007 – Aug 27, 2007

Duties and Responsibilities (Job Description) o o o o o

We weld fabricated pallet We used mild steel 1.2mm filler wire Argon and Co2 gas we used I report to the team leader the production I finished

Company: F-Tech Philippines Inc. Address: Binan Laguna Philippines Position:

Mig Welder

Date :

Jul 07, 2006 - Dec 07, 2006

Duties and Responsibilities (Job Description)

o o

Welding fabricated Pedal Using 1.2mm filler wire for Mig welding

Company: Masuda Philippines Inc. Address: Binan Laguna Philippines Position: Date:

Welder Mar 25, 2004 – Jun 30, 2006

Duties and Responsibilities (Job Description) o o o o o

Welding Honda Big Bike Motor exported to Europe Welding under chassis of Big Bike Using 0.9mm filler wire for Mig welding Welding muffler under supervision of Quality Control personnel Strict quality welding are implemented for Big Bike to maintain brand name HONDA Tools and Equipment Used: o o o o o o o o o o o o o o o o o o o o

Electric Driver Drill wired or cordless Electric 5” Grinder Jigsaw Table Disc Cutter Oxy Acetylene Delta Weld 302 Miller for Mig and Fcaw Welding -302 MigRunner for Mig and Fcaw Welding Yamato 500 for Stick Welding Daiken 500 for Stick Welding PowerCraft 300 for Stick Welding Lincoln for Stick Welding Wrench C - clamp Adjustable Rivets Power Tools Hand Tools Overhead Crane Air grinder Etc..

I hereby certify that the facts contained in this resume are true and correct to the best of my knowledge.

Eddie S. Soriano Applicant