Cable Trough Systems 203741

Cable Trough Systems Tracey Concrete offer a diverse range of Cable Trough Systems designed to protect and hold any necessary utility services. Manufactured from reinforced precast concrete, cable troughs are a great alternative to traditional methods of simply burying service lines as they allow quick access for maintenance and security.

Electrical, Power Station, Waste Water & sewage, Highway, Rail and Domestic are all just some applications for our Cable Trough Systems.

Advantages:

-Added protection & security -Quick access for repair -High strength precast concrete design -Resistant to chemicals -Easily installed

Standard precast concrete access ducting with inset lids Features and Benefits Mechanical protection A number of wheel load lid options • Structurally reinforced • •

• • • •

Positively marked and identified Reduced installation time Lifting holes in troughs and lids Simple installation

Secure units Trafficking capability • Easy access to services • •

• •

Assured performance Bespoke items

Main photo withPrecast Concrete Lid. Topright with Steel Lid. Bottom right with GRP Cover.

A cess cDucting - D etail d Design I nforma t On i Trough Reference

Trough Dimensions (mm) A

B

C

D

E

Trough Weight (kg)

Lid Ref

F

Lid Dimensions (mm) H

I

J

Lid Weight (kg)

Max Traffic Wheel Load (tonnes)

Lid Lifter Type

SP 350 X 300 LD

*

1000

340

296

500

609

365

372

SP 350**

500

467

100

56

2 tonnes

Key

SP 350 X 300 MD

*

1000

340

296

500

609

365

372

SP 350**

500

467

100

60

5 tonnes

Key

SP 600 X 300 LD

*

1000

585

296

500

854

610

425

SP 600**

500

712

100

85

2 tonnes

Key

SP 600 X 300 MD

*

1000

585

296

500

854

610

425

SP 600**

500

712

100

90

5 tonnes

Key

SP 400 X 400 MD

*

1000

380

400

654

700

410

570

SP 400**

500

512

100

62

5 tonnes

Deha

SP 600 X 600 MD

*

1000

570

600

854

900

610

787

SP 600**

500

712

100

90

5 tonnes

Deha

SP 1000 X 1000 MD

*

1000

960

1000

1304

1426

1036

1565

SP 1000**

500

1242

150

225

5 tonnes

Deha

SP 1000 X 510 MD

*

1000

1000

510

814

1426

1036

1055

SP 1000**

500

1242

150

225

5 tonnes

Deha

* Also available with reduced rebate to take GRP lids with a side wall hole for the entry / exit of services. ** These lid sizes are available in GRP (Pedestrian), galvanised steel (11.5T), and steel lids suitable for infill with paving or concrete.

Medium Duty For use in car parks and access roads subject to occasional commercial vehicle traffic e.g access to works and plants. Maximum wheel loading of five tonnes.

Trafficking Application Classes CharconSpecialist

Heavy Duty

Products offers a rangeoflidstosuitallyourtrafficking

Steel lidded units offer a maximum wheel load of 11.5 tonnes which can be used for lorry parks and kerbsides (non - public highways) e.g. all road-going vehicles up to 15 mph max.

application needs. Each lid has the necessary lifting inserts to facilitate lifting when accessing the ducts at a future date. Trafficking Application Classes are as follows:

Light Duty For use in private driveways and grassed areas e.g. parkland maintained with mowing equipment. Maximum wheel loading of two tonnes.

It is strongly advised that you select a higher grade of unit if channelised trafficking or an excessive amount of commercial traffic is anticipated. Loading test data and trafficking application classes are based on linear drainage standard DIN 19580 which forms the basis of a draft European Standard.

Units have been subjected to test loads from 15kN (pedestrian) up to 400kN (heavy duty). This test data, together with our unrivalled experience of Access Ducting in trafficked situations, has enabled us to help our clients to select the best product for their application. All lifting devices for the troughs and lids are available from the Charcon Sales Office.

90 degree units

Angle Iron Lid

o

* Also available with reduced rebate to take GRP lids with a side wall hole for the entry / exit of services. ** These lid sizes are available in GRP (pedestrian), galvanised steel (11.5T), andsteel lids suitable for infill with paving or concrete.

A cce ss Duc ingt - D etail d Desi gn Info ma tion Trough Reference

Trough Dimensions (mm) A

B

C

D

E

Trough Weight (kg) F

Lid Ref

G

Lid Dimensions (mm) H

I

J

Lid Weight (kg)

Max Traffic Wheel Load (tonnes)

Lid Lifter Type

SP 350 X 300

*

1071 340

445

500

609

365 1054

580

SP 350**

500

467

100

56

2 tonnes

Key

SP 350 X 300

*

1071 340

445

500

609

365 1054

580

SP 350**

500

467

100

60

5 tonnes

Key

SP 600 X 300

*

1071 585

445

500

854

610 1299

660

SP 600**

500

712

100

85

2 tonnes

Key

SP 600 X 300

*

1071 585

445

500

854

610 1299

660

SP 600**

500

712

100

90

5 tonnes

Key

Angle Iron Lid

Tee units * Also available with reduced rebate to take GRP lids with a side wall hole for the entry / exit of services. ** These lid sizes are available in GRP (pedestrian), galvanised steel (11.5T), andsteel lids suitable for infill with paving or concrete.

Trough

Lid

Lid Weight

(mm)

1000 340

445 500

609 365 1054 530

SP 350** 500

467

100

56

1000 340

445 500

609 365 1054 530

SP 350** 500

467

100

60

1500 585

445 500

854 610 1299 750

SP 600** 500

712

100

85

Max Traffic Wheel Load

Lid

Stop end units throughallfour lifting holes from the inside wallofthe troughunit.

These precast units are a cost-effective, quick and easy method of constructing stop ends on site.

Access Ducting Stop End Referenc e

Stop End Dimensions (mm)

Stop End Weight (kg)

A

D

E

SP 350 X 300

80

500

609

70

SP 600 X 300

80

500

854

90

Transition units

Angle Iron Lid

4.

Installation Procedure The recommended installation procedure is as follows:1. Prepare bed or foundation to suit ground conditions and loading. 2. Position trough to line and level. 3. Abut the next trough, the flat end face against the installed end face. Bed and level the unit to suit. 4. 5. 6. 7.

Haunch or back fill as required. Repeat the procedure to form the required duct length. Install the service within the duct. Position the lids in each duct unit, ensuring that there is exactly two No. per duct.

8. The units should be satisfactorily sealed using proprietary sealants which are available from the Charcon Sales Office. Telephone 01455 288275. Note: Lifting bar and shackle devices are also available from the Charcon Sales Office.