Biolock Access Control Manual 6e414x
This document was ed by and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this report form. Report r6l17
Overview 4q3b3c
& View Biolock Access Control Manual as PDF for free.
More details 26j3b
- Words: 5,611
- Pages: 38
Manual
Biolock Access Control Software Version: 1.0 Date: June 2014
1
Contents
Contents Software Installation ....................................................................................... 1 Cautions ..................................................................................................................................................... 1 Installation .................................................................................................................................................. 1
Software Instructions ...................................................................................... 6 Software Function ...................................................................................................................................... 6 Basic Process ............................................................................................................................................ 7
Software Management .................................................................................... 7 Software ........................................................................................................................................... 7 Modify ....................................................................................................................................... 7 Management ..................................................................................................................................... 8 Database Management ........................................................................................................................... 10
Personnel Management ................................................................................ 13 Department Management ........................................................................................................................ 13 Personnel Management .......................................................................................................................... 14 Issue Card ............................................................................................................................................... 20
Device Management ...................................................................................... 21 Area Management ................................................................................................................................... 21 Device Management ................................................................................................................................ 21 U Disk Management ................................................................................................................................ 23
Access Control .............................................................................................. 28 Access Timetable .................................................................................................................................... 28 Holidays ................................................................................................................................................... 30 Access Levels .......................................................................................................................................... 31
Appendix ........................................................................................................ 33 FAQs ........................................................................................................................................................ 33 SOFTWARE PRODUCT LICENSE ......................................................................................................... 34
I
Software Installation
Software Installation Cautions
Configuration Requirements: U: Master frequency of 2.0 GHz or above. Memory: 1 GB or above. Hardware: Available space of 10 G or above. We recommend using NTFS hard disk partition as the system installation directory (NTFS hard disk partition has the better performance and higher security). Resolution of monitor: 1024x768 or above.
Operating System: ed Operating Systems: Windows XP/Windows 2003/Windows Vista/Windows7/Windows8 ed Databases: Microsoft Access
Note:
If the software has been installed in the computer, uninstall the software, reboot the computer, and install the software again.
During installation, file registration, registry modification, and batch file processing are performed. Note that anti-virus software may stop program installation by reporting an error. The firewall software installed in the computer will stop the service. Please select Allow for all options or disable the firewall and then start installation again.
Installation Double-click OK.
Click Next.
1
under the installation directory. The following dialog box is displayed. Click
Software Installation
Select I accept the agreement and click Next.
Select the installation path and click Next.
Select the path for creating a shortcut and click Next.
2
Software Installation
Select the path for storing backup files and click Next.
Caution: Do not make the path for backing up the database in the same drive as the installation path of this system or set the path for backing up the database in the root directory of the drive.
The storage and backup paths cannot contain Chinese characters.
The storage path cannot contain spaces.
If you do not select a path for backing up files, directly click Next. The following dialog box is displayed:
Click Install. 3
Software Installation
Start installation.
Install Fingerprint Reader Driver and click Next.
Click Next.
4
Software Installation
Click Install.
Select Yes, restart the computer now and click Finish to restart the computer.
After the software is installed, the following shortcut icon appears on the desktop: 5
.
Software Instructions
Software Instructions Software Function
Functions
Input personnel information on software, which includes ID, name, card number, fingerprint, , etc. ing personnel information from software to lock via U-Disk.
ing data from lock to software via U-Disk. Exporting unlocking records from the lock to software via U-Disk and saving the records in local computer.
Setting access control function, which includes Access Timetable, Holiday, Access Levels. Enable above configuration in the locks.
Features to connect with 225 pieces locks at most in standard configuration. Visible and reasonable work flows come from abundant experience in access control management. Automatic name lists management. Multilevel management role-based level management secures data confidentiality.
Overview
Software Modules:
The system includes five major functional modules. System: Allocates system s, changes a , initializes the system, and manages the database, 6
Software Management
for example, set, back up, initialize and restore the database. Personnel: Primarily two parts: first, Department Management settings, used to set the Company's organizational chart; Second, Personnel Management settings, used to input personnel information, assign departments, maintain and manage personnel. Device: namely smart lock. You can add a smart lock device. The system communicates with a smart lock through a USB drive. Access Control: Including Access Timetable, Holiday, Access Levels, Which is used to enable/disable s open specified locks under proper timetable.
Basic Process Follow the process below to operate the software: Add DeviceAdd PersonnelAdd Access Control DefinitionExport to U-Disk
Software Management Software Double-click the Biolock Access Control icon on the desktop. The page is displayed.
Enter the name and and click OK to enter the system. The initial name is and the is . After logging in to the system for the first time, you can change the by using the Modify function to guarantee system security.
Modify Select System > Modify . The page for changing the is displayed.
Enter the old and a new , confirm the new , and click OK. The is 7
Software Management
changed.
Management During daily use, different s can be allocated for the system to perform operation on the system. The initial that has logged in to the system can perform all system operations and manage any department and personnel in the system. For a new , the management department and management area need to be set. If no option is selected, all management departments and management areas are selected by default.
Select System > . The management interface is displayed.
Add
Click Add. The page for adding a is displayed.
Enter Name, , Confirm , Role, and Remarks, select Status, and click OK. The system returns to the management interface and the added is displayed in the list.
Note:
A must be longer than four bytes and shorter than 18 bytes.
Only can be selected for Role.
The status Normal indicates that the can to the system and perform operation and the status Disable indicates that the cannot to the system.
Edit
Select a and click Edit. The page for editing a is displayed.
8
Software Management
Modify information and click OK.
Delete
Select a and click Delete. The following message is displayed:
Click Yes to delete the .
Allocate Management Department for a New
Select a , click Department Management, and allocate a management department for the .
Allocate Management Area for a New
Select a , click Area Management, and allocate a management area for the .
9
Software Management
Database Management The software considers MS Access to be the default database. The system provides the functions of setting, backing up, restoring, and initializing the database.
Database Connection
Select System > Database Management > Database Connection.
Click Browse, enter the preset path for the database, and select the database. Click OK and enter the of the database (if no is set, you do not need to enter any information). Click OK. The database is set.
Backup Database
Back up the system database regularly to guarantee data security. When you need to use the database that is backed up, restore the data.
Select System > Database Management > Backup Database. The following message is displayed:
Click Yes. Backup starts. After data is backed up completely, the following message is displayed:
10
Software Management
Note: You are advised to back up data after creating personnel archives information and equipment information and setting access control for some modules.
Restore Database
Select System > Database Management > Restore Database. The page for selecting the database that is backed up is displayed.
Select the database that is backed up successfully and click Open. The following dialog box is displayed:
Click Yes. The system restarts. During the process, the database is restored. Caution: Do not close any command line window that is displayed during the process of database restoration.
Database Backup Path Setting
Select System > Database Management > Database Backup Path Set. The following dialog box is displayed:
Click Browser, select a backup path, and click OK. 11
Software Management
Caution: During software installation, set the path for backing up the database as prompted. If the path is not preset, the system cannot back up the database. Do not make the path for backing up the database in the same drive as the installation path of this system or set the path for backing up the database on the desktop or in the root directory of the drive.
12
Personnel Management
Personnel Management Department Management Before managing personnel of the company, you need to describe and manage the organizational structure of the company. When you use the system for the first time, the system has a default tier-1 department whose name is Company Name and number is 1. The department can be modified but cannot be deleted. Department management functions include adding a department, editing a department, and deleting a department.
Add Department
Select Personnel > Department > Add. The page for adding a department is displayed. Description of fields: Department Name: A department name can be any characters or a combination of up to 50 characters. Department Number: If a department number is needed, the department number cannot be repeated and the total length of the department number cannot exceed 50 bytes. Parent Department: When adding a department, select a department as the upper-level department of the new department or select an upper-level department from the menu.
After editing information, click OK. Or click Cancel to cancel the operation. Caution:
"Parent Department" is an important parameter for determining the organizational structure of the company. Be sure to select a correct parent department.
You can also add a department by importing department information from other software or documents to this system. The specific operation procedure is the same as that of “Import Personnel”. For details, see “Import Personnel”.
After adding a department, right-click any department in the department list and select Tree Show. The following page is displayed:
13
Personnel Management
Edit Department
If a department or the organizational structure of the company is changed, you can modify the information, for example, department name, department number or parent department, by using the edit function.
Select Personnel > Department, select a desired department, and click Edit. The specific operation procedure is the same as that for adding a department.
Delete Department
To cancel a department, select the department and click Delete or directly click Delete behind the department.
Select Personnel > Department, select a desired department, and click Delete. The following message is displayed:
Click OK. Caution: Do not delete or modify a department at random. If you delete or modify a department, the personnel belonging to the department will not have a management department and some historical data cannot be queried. If you really need to be delete or modify a department, transfer personnel of the department to another department first.
Log Entries
Log entries record historical operations on the system. All operations are recorded in the form of list. On the department page, personnel page, and issue card page, the log entry button is available. Click the button to display related records.
Personnel Management Before using or managing the system, you need to personnel in the system or import personnel information in other software to this system. 14
Personnel Management
Add Personnel
Select Personnel > Personnel > Add. The page for adding a person is displayed.
The following describes the fields: Personnel Number: The value range is 1 to 65534. Department: Click the drop-down box. The window for selecting a department is displayed. Select a department and double-click or click OK. Name: The name length is shorter than 40. Card Number: The value range is from 1 to 9999999999. It can be typed manually or got by card issuer. : The length range is 6 -10 digits. Please set the proper according to the lock with existed keypad numbers. Picture: The best size is 120x140 pixel and the format must be JPG. Employee Date: The current date is used by default. Terminal Management: including common and super .
Click Details. For page for editing details is displayed.
15
Personnel Management
Click Alternative Access Levels. The page for setting access control is displayed.
Alternative Access Levels: Select an access level and set the start date and end date of a valid period. Valid Time is set for temporary access control, that is, doors can be opened in the valid period. If you do not select the option, the access control is always effective by default. Note: Only when the Access Control finished setting, can you do the operations above.
After editing personnel information, click OK. The added person is displayed in the personnel list. Click Save and Continue to continue to add persons.
Batch Add Personnel
Caution:
To batch add persons, you need to select an object to copy. When no personnel information is available, the batch adding function cannot be used.
The length of personnel numbers of persons to be batch added cannot exceed eight bytes. Only 1000 persons can be batch added at a time.
Select a person that will be copied as an object and click Batch Add Personnel.
16
Personnel Management
Number Format: format of personnel number. “(*)” indicates wildcard. Take care not to delete or modify the wildcard. Wildcards“(*)”width: valid width of wildcard. It mainly limits the number of digits in the From and To edit boxes. Select the fields Name to copy: information of batch added personnel that is the same as information of the copied person.
After setting the preceding parameters, select fields to be copied on the right and click OK.
After data is saved, close the window and click Personnel again. The personnel list is changed to the following:
17
Personnel Management
Edit and Delete Personnel
For the preceding functions, you can select a person and click Edit. On the editing page, modify information and click OK. Or select a person and click Delete to delete the person. Note: After a person is deleted, the information about the person in the database is also deleted.
Import Personnel
If electronic personnel archives already exist, import the archives to this system through the import function.
Click Import. The page for editing import is displayed.
Target file: Click Browse and select a file to be imported. File format: Select the format of a file to be imported. Caution:
Excel files must be in the .xls format.
A TXT file must contain fields of corresponding personnel information, for example, personnel number, name, and department number.
After selecting the file format and target file (a file in the corresponding format must be available locally), click Next.
18
Personnel Management
Select fields to be imported.
indicates selecting all,
indicates deselecting the item selected by using mouse, and following figure shows data to be imported:
indicates selecting a single item, indicates deselecting all. The
Click Next and select corresponding data source fields.
Click Next. The import progress bar is displayed. After import is complete, close the window.
19
Personnel Management
Issue Card Allocate card numbers to personnel. You can allocate a card number when a person is added or allocate a card number through the Issue Card menu.
Instructions for card issuer
The card issuer is connected to the PC through a USB port. Click the box for entering a card number and swipe a card on the card issuer. The card number is automatically displayed in the box.
Issue Card
Select Personnel > Issue Card and click Add, or select a person in the personnel information list, right-click, and select Add. The following dialog box is displayed:
Select a person, enter the card number, and click OK.
Modify or Edit Card Number
In the personnel list, select a personnel card number and click Edit or Delete to modify the card number or delete the selected object.
20
Device Management
Device Management Area Management Area is a concept of space. It helps s manage devices in the specified area. After an area is set, you can filter devices (doors) based on the area during real-time monitoring. By default, an area whose name is “Area Name" and number is 1 exists in the system. Area setting operations include adding an area, editing an area, and deleting an area.
Add Area
Select Device > Area > Add. The page for adding an area is displayed:
The fields are described as follows: Area Name: It is defined by any words or numbers. For example: Front Door or 3 Floor. Area Code: It must be unique numbers. Parent Area: This parameter is mandatory. It decides the area framework of the company.
After setting the preceding parameters, click OK.
Delete Area
Select an area and click Delete. In the dialog box displayed, click Yes.
Edit Area
Select an area and click Edit. On the page for editing an area, modify related parameters.
Device Management After parameters about communication between the system and a smart lock are set, the system can communicate with the smart lock. In the system, view the information about the connected smart lock.
Add Device
1. Select Device > Device > Add.
21
Device Management
The fields are described as follows: Device Name: A device name can be any characters. A combination of up to 50 characters can be used. Area: area where a device is located. Communication Mode: communication over USB drive. Import U-Disk: Click to import a device file. Device Number/Type: After a device file is imported, the file is displayed automatically.
After setting the preceding parameters, click OK. The system attempts to connect the current device.
If the device is connected successfully, the system will read extension parameters of the device and information about the device is displayed in the device list.
2.
Select Device > Search Smart Lock.
Click Search U-Disk.
22
Device Management
After a device is searched, click Add U-Disk. In the dialog box displayed, enter the device name, select an area for the device, and click OK. The device is added to the device list.
Edit or Delete Device
The system displays current smart locks in the scope of all permissions. You can edit smart locks here. If you need to add or delete a smart lock, perform related operations in device management.
Select a smart lock and click Edit or Delete to modify or delete the smart lock.
Search Device
Select Device > Device > Search. A dialog box is displayed. Enter related information and click OK.
U-Disk Management USB drive management includes importing data, exporting data, and importing record data.
Select Device > U-Disk Management. The U-Disk Management page is displayed.
23
Device Management
Import from U-Disk
Import data in an USB drive to the system.
On the U-Disk Management page, click Import from U-Disk.
After data is imported successfully to the system, the data is displayed on the U-Disk Management page, as shown in the following figure:
You can select corresponding personnel to update the personnel in the local computer. After the personnel are updated, the personnel of corresponding numbers in the local computer are changed to 24
Device Management
the personnel you have just selected.
Export to U-Disk
Export data in the system to the specified device.
On the U-Disk Management page, click Export to U-Disk.
In the list on the left, select a and click s, click
to move the to the right. To export all
to move all s to the right.
1. Export data to the local computer.
Select personnel to be exported and click Export data to local. The following page is displayed:
Select the path for saving the data and save the data. The system prompts that the operation is successful. Click OK. 2. Export data to a USB drive.
Select personnel to be exported, select the file type and algorithm in the drop-down box, and click Export data to U-Disk.
25
Device Management
After the data is exported successfully, you can check whether corresponding data already exists in the USB drive. Caution:
When you export data to a USB drive or import data from a USB drive, make sure that the USB drive is correctly connected to the computer and corresponding data exists in the USB drive.
File types include “.DAT” and “.U”. Data in a .DAT file is ed from a fingerprint lock by using algorithm 9.0. When you select .DAT for the file type, the algorithm must be algorithm 9.0.
Import Record Data
On the U-Disk Management page, click Import record from U-Disk.
1. Import record from U-Disk Import record data in a USB drive to the system.
Click Import record from U-Disk. When records exist in the USB drive, the data is imported to the system, as shown in the following figure:
26
Device Management
2. Export Data to Local Export record data in the system to a local computer.
Click Export Data to Local and select a local storage path. When records exist in the system, the data is imported to the local computer.
Open a file that is saved in the local computer. The following information is displayed:
3. Delete Records Delete record data in the system.
Select a record on the left and click Delete record. The record is deleted.
27
Access Control
Access Control It is used to enable/disable open specified locks under proper timetable. But you need to set the option of Access Timetable, Holiday, Access Level in advance.
Access Timetable The system can define up to 255 timetable. For each timetable, you can define, during a week, you can define up to three intervals for each day and three holiday types for each timetable. Each interval is the valid interval in 24 hours of each day. The format of each interval for a timetable: HH: MM-HH: MM, this is accurate to minutes in the 24-hour system. Initially, by default the system has access control time table named [Accessible 24 hours]. This time period can be modified but cannot be deleted. The can add Access Control Timetable that can be modified.
Add Timetable
Select Access Control > Timetable > Add. The page for setting a time segment is displayed.
The parameters are as follows: Timetable Name: Any character, up to a combination of 50 characters. Remarks: Detailed description of the current timetable, including an explanation of the current timetable and primary applications, facilitating the or other s with same level to view timetable information. The field is up to 70 characters. Holiday Type: Three holiday types can be defined. The timetable of each type can be different. When adding holidays, you must specify the holiday type. In the access control system, the priority of holidays is higher than that of common weekdays. 28
Access Control
For example, the Children's Day in 2014 is Sunday (June 1st). When adding holidays, you can set the Children's Day as holiday type 1. When June 1st, 2014 arrives, the equipment manages access control timetable according to the preset holiday type 1, instead of the preset timetable on Sunday. Start Time: Start time of a timetable. End Time: End time of a timetable. Note:
If the holiday type of a timetable is not set, the access is denied in 24 hours by default.
A maximum of three timetable can be set in a day.
In the time axis of each day in a week and three holiday types, click where time starts and drag the mouse to where time ends, or click Start Time and End Time in the lower part of the window to set a time segment. To modify or delete a timetable, right-click in the time axis and select Modify time or Delete time, as shown in the following figure:
After setting the preceding information, click OK to return to the list of access control time segments.
Edit or Delete Timetable
Edit: In the time segment list, double-click a time segment or select a time segment and click Edit. On the page for editing a time segment, modify the time segment and click OK. The modified time segment is saved and displayed in the time segment list. Delete: In the time segment list, select a time segment and click Delete. Click Yes to delete the time segment or click Cancel to cancel the operation. You cannot delete an access control time segment that is currently in use.
29
Access Control
Holidays The Access Control Time of a holiday may differ from that of a weekday. For easy operation, the system provides holiday settings to set access control time for holidays. Access Control Holiday Management includes Add, Modify and Delete Access Control Holiday.
Add Holiday
Three holiday types are ed, each including up to 32 holidays. To conduct special access level configuration on special dates, the can select special holidays for setting.
Select Access Control > Holidays > Add. The page for adding an access control holiday is displayed.
The parameters are as follows: Holiday Name: Any character, up to a combination of 50 characters. Holiday Type: Holiday Type 1/2/3, namely, A current holiday record belongs to these three holiday types and each holiday type includes up to 32 holidays. Start / End Date: Must meet the date format as "2012-1-1". The Start Date cannot be later than the End Date otherwise the system will prompt an error. The year of the start date Start Date cannot be earlier than the current year, and the holiday can not span years. Recurring: Yes or No. The default is "No". Annual cycle means that a holiday does not require modification in different years. For example, the Near Year's Day is on January 1 each year, and can be set as "Yes". For another example, the Mother's Day is on the second Sunday of each May, so its date is not fixed and should be set as "No".
After editing information, click OK. The holiday name is displayed in the list.
Edit Holidays
In the access control holiday list, double-click an access control holiday or select an access control holiday and click Edit. The page for editing an access control holiday is displayed. Modify the holiday and click OK.
Delete Holidays
In the access control holiday list, select an access control holiday and click Delete. Then click Yes to delete the holiday or click Cancel to cancel the operation. The access control holiday that is currently in 30
Access Control
use cannot be deleted.
Access Levels Access levels means in a specific time period, which door or door combination can be opened through verification.
Add Access Level
Select Access Control > Access Level > Add. The page for adding an access level is displayed.
Set various parameters: Set Access Level Name (cannot be repeated), select Access Control Timetable, and select door combination and personnel.
Select a person from the Alternative Personnel list and click
to move the person to the
selected personnel list.
Click OK. The added access level is displayed in the list. Note:
Select the doors in the access levels as multi-choice, so you can select different locks.
When adding personnel, if selected personnel exist in the current access level, the system can not add again.
Two levels with the same timetable and door combination are not allowed in the system.
Personnel Access Level Setting
Select an access level and click Personnel Access Level Setting. The page for setting access levels is displayed.
31
Access Control
Select a person and click Delete From Access Levels to delete the access level of the person.
32
Appendix
Appendix FAQs Q: How to use the card issuer? A: Select a person to issue cards and connect the card issuer to a PC through a USB port. Click the box for entering a card number and swipe a card on the card issuer. The card number is automatically displayed in the box. Q: I want to set s for all personnel in the Finance Department of the company? How do I operate? A. First of all, set roles in system settings: 1. Create a role and configure various functions to be used by the role. 2. Add a , set information, and select the role you set for the . An is added. 3. Follow the procedure to add other s. Q: How to adjust the department of a person? A: To adjust the department of a person, in the personnel list, select a person and click Edit. The detailed information about the person is displayed. In the department option, modify the department of the person. Q: How to set access control levels for visitors? A: The procedure for setting access control levels is as follows: 1. Add the personnel to the system and enter related information. 2. Select access control levels suitable to the personnel. If no suitable access control levels are available, enter the access control system and add related settings. 3. Set a valid period, that is, start date and end date when they need to use access control levels. Q: How to cancel an access control level? A: The following methods can be used to cancel an access control level: 1. Disable access control: In the personnel list, select a person and click Edit. The detailed information about the person is displayed. In the access control setting, delete the access level and personnel group for opening doors using multiple cards. 2. Delete a person: In the personnel list, select a person and click Delete. The person is deleted from the system and corresponding access control information is deleted. 3. In Personnel Access Control Setting, select an access level and click Delete from Access Levels.
33
Appendix
SOFTWARE PRODUCT LICENSE The SOFTWARE PRODUCT is protected by copyright laws and international copyright treaties, as well as other intellectual property laws and treaties. The SOFTWARE PRODUCT is licensed, not sold. 1. GRANT OF LICENSE. This EULA grants you the following rights: Installation and Use. You may install and use an unlimited number of copies of the SOFTWARE PRODUCT. Reproduction and Distribution. You may reproduce and distribute an unlimited number of copies of the SOFTWARE PRODUCT; provided that each copy shall be a true and complete copy, including all copyright and trademark notices, and shall be accompanied by a copy of this EULA. Copies of the SOFTWARE PRODUCT may be distributed as a standalone product or included with your own product. 2. DESCRIPTION OF OTHER RIGHTS AND LIMITATIONS. Limitations on Reverse Engineering, Recompilation, and Disassembly. You may not reverse engineer, decompile, or disassemble the SOFTWARE PRODUCT, except and only to the extent that such activity is expressly permitted by applicable law notwithstanding this limitation. Separation of Components. The SOFTWARE PRODUCT is licensed as a single product. Its component parts may not be separated for use on more than one computer. Software Transfer. You may permanently transfer all of your rights under this EULA, provided the recipient agrees to the of this EULA. Termination. Without prejudice to any other rights, the Author of this Software may terminate this EULA if you fail to comply with the and conditions of this EULA. In such event, you must destroy all copies of the SOFTWARE PRODUCT and all of its component parts. Distribution. The SOFTWARE PRODUCT may not be sold or be included in a product or package which intends to receive benefits through the inclusion of the SOFTWARE PRODUCT. The SOFTWARE PRODUCT may be included in any free or non-profit packages or products. 3. COPYRIGHT. All title and copyrights in and to the SOFTWARE PRODUCT(including but not limited to any images, photographs, animations, video, audio, music, text, and "applets" incorporated into the SOFTWARE PRODUCT), the accompanying printed materials, and any copies of the SOFTWARE PRODUCT are owned by the Author of this Software. The SOFTWARE PRODUCT is protected by copyright laws and international treaty provisions. Therefore, you must treat the SOFTWARE PRODUCT like any other copyrighted material except that you may install the SOFTWARE PRODUCT on a single computer provided you keep the original solely for backup or archival purposes. LIMITED WARRANTY NO WARRANTIES.
34
Appendix
The Author of this Software expressly disclaims any warranty for the SOFTWARE PRODUCT. The SOFTWARE PRODUCT and any related documentation is provided "as is" without warranty of any kind, either express or implied, including, without limitation, the implied warranties or merchantability, fitness for a particular purpose, or no infringement. The entire risk arising out of use or performance of the SOFTWARE PRODUCT remains with you. NO LIABILITY FOR DAMAGES. In no event shall the author of this Software be liable for any damages whatsoever (including, without limitation, damages for loss of business profits, business interruption, loss of business information, or any other pecuniary loss) arising out of the use of or inability to use this product, even if the Author of this Software has been advised of the possibility of such damages.
Acknowledgment of Agreement. I have carefully read and understand this Agreement, ZKTeco, Inc.’s Statement. If YOU ACCEPT the of this Agreement: I acknowledge and understand that by ACCEPTING the of this Agreement. IF YOU DO NOT ACCEPT the of this Agreement. I acknowledge and understand that by refusing to accept these , I have rejected this license agreement and therefore have no legal right to install, use, or copy this Product or the Licensed Software that it incorporates.
35
3 6
Biolock Access Control Software Version: 1.0 Date: June 2014
1
Contents
Contents Software Installation ....................................................................................... 1 Cautions ..................................................................................................................................................... 1 Installation .................................................................................................................................................. 1
Software Instructions ...................................................................................... 6 Software Function ...................................................................................................................................... 6 Basic Process ............................................................................................................................................ 7
Software Management .................................................................................... 7 Software ........................................................................................................................................... 7 Modify ....................................................................................................................................... 7 Management ..................................................................................................................................... 8 Database Management ........................................................................................................................... 10
Personnel Management ................................................................................ 13 Department Management ........................................................................................................................ 13 Personnel Management .......................................................................................................................... 14 Issue Card ............................................................................................................................................... 20
Device Management ...................................................................................... 21 Area Management ................................................................................................................................... 21 Device Management ................................................................................................................................ 21 U Disk Management ................................................................................................................................ 23
Access Control .............................................................................................. 28 Access Timetable .................................................................................................................................... 28 Holidays ................................................................................................................................................... 30 Access Levels .......................................................................................................................................... 31
Appendix ........................................................................................................ 33 FAQs ........................................................................................................................................................ 33 SOFTWARE PRODUCT LICENSE ......................................................................................................... 34
I
Software Installation
Software Installation Cautions
Configuration Requirements: U: Master frequency of 2.0 GHz or above. Memory: 1 GB or above. Hardware: Available space of 10 G or above. We recommend using NTFS hard disk partition as the system installation directory (NTFS hard disk partition has the better performance and higher security). Resolution of monitor: 1024x768 or above.
Operating System: ed Operating Systems: Windows XP/Windows 2003/Windows Vista/Windows7/Windows8 ed Databases: Microsoft Access
Note:
If the software has been installed in the computer, uninstall the software, reboot the computer, and install the software again.
During installation, file registration, registry modification, and batch file processing are performed. Note that anti-virus software may stop program installation by reporting an error. The firewall software installed in the computer will stop the service. Please select Allow for all options or disable the firewall and then start installation again.
Installation Double-click OK.
Click Next.
1
under the installation directory. The following dialog box is displayed. Click
Software Installation
Select I accept the agreement and click Next.
Select the installation path and click Next.
Select the path for creating a shortcut and click Next.
2
Software Installation
Select the path for storing backup files and click Next.
Caution: Do not make the path for backing up the database in the same drive as the installation path of this system or set the path for backing up the database in the root directory of the drive.
The storage and backup paths cannot contain Chinese characters.
The storage path cannot contain spaces.
If you do not select a path for backing up files, directly click Next. The following dialog box is displayed:
Click Install. 3
Software Installation
Start installation.
Install Fingerprint Reader Driver and click Next.
Click Next.
4
Software Installation
Click Install.
Select Yes, restart the computer now and click Finish to restart the computer.
After the software is installed, the following shortcut icon appears on the desktop: 5
.
Software Instructions
Software Instructions Software Function
Functions
Input personnel information on software, which includes ID, name, card number, fingerprint, , etc. ing personnel information from software to lock via U-Disk.
ing data from lock to software via U-Disk. Exporting unlocking records from the lock to software via U-Disk and saving the records in local computer.
Setting access control function, which includes Access Timetable, Holiday, Access Levels. Enable above configuration in the locks.
Features to connect with 225 pieces locks at most in standard configuration. Visible and reasonable work flows come from abundant experience in access control management. Automatic name lists management. Multilevel management role-based level management secures data confidentiality.
Overview
Software Modules:
The system includes five major functional modules. System: Allocates system s, changes a , initializes the system, and manages the database, 6
Software Management
for example, set, back up, initialize and restore the database. Personnel: Primarily two parts: first, Department Management settings, used to set the Company's organizational chart; Second, Personnel Management settings, used to input personnel information, assign departments, maintain and manage personnel. Device: namely smart lock. You can add a smart lock device. The system communicates with a smart lock through a USB drive. Access Control: Including Access Timetable, Holiday, Access Levels, Which is used to enable/disable s open specified locks under proper timetable.
Basic Process Follow the process below to operate the software: Add DeviceAdd PersonnelAdd Access Control DefinitionExport to U-Disk
Software Management Software Double-click the Biolock Access Control icon on the desktop. The page is displayed.
Enter the name and and click OK to enter the system. The initial name is and the is . After logging in to the system for the first time, you can change the by using the Modify function to guarantee system security.
Modify Select System > Modify . The page for changing the is displayed.
Enter the old and a new , confirm the new , and click OK. The is 7
Software Management
changed.
Management During daily use, different s can be allocated for the system to perform operation on the system. The initial that has logged in to the system can perform all system operations and manage any department and personnel in the system. For a new , the management department and management area need to be set. If no option is selected, all management departments and management areas are selected by default.
Select System > . The management interface is displayed.
Add
Click Add. The page for adding a is displayed.
Enter Name, , Confirm , Role, and Remarks, select Status, and click OK. The system returns to the management interface and the added is displayed in the list.
Note:
A must be longer than four bytes and shorter than 18 bytes.
Only can be selected for Role.
The status Normal indicates that the can to the system and perform operation and the status Disable indicates that the cannot to the system.
Edit
Select a and click Edit. The page for editing a is displayed.
8
Software Management
Modify information and click OK.
Delete
Select a and click Delete. The following message is displayed:
Click Yes to delete the .
Allocate Management Department for a New
Select a , click Department Management, and allocate a management department for the .
Allocate Management Area for a New
Select a , click Area Management, and allocate a management area for the .
9
Software Management
Database Management The software considers MS Access to be the default database. The system provides the functions of setting, backing up, restoring, and initializing the database.
Database Connection
Select System > Database Management > Database Connection.
Click Browse, enter the preset path for the database, and select the database. Click OK and enter the of the database (if no is set, you do not need to enter any information). Click OK. The database is set.
Backup Database
Back up the system database regularly to guarantee data security. When you need to use the database that is backed up, restore the data.
Select System > Database Management > Backup Database. The following message is displayed:
Click Yes. Backup starts. After data is backed up completely, the following message is displayed:
10
Software Management
Note: You are advised to back up data after creating personnel archives information and equipment information and setting access control for some modules.
Restore Database
Select System > Database Management > Restore Database. The page for selecting the database that is backed up is displayed.
Select the database that is backed up successfully and click Open. The following dialog box is displayed:
Click Yes. The system restarts. During the process, the database is restored. Caution: Do not close any command line window that is displayed during the process of database restoration.
Database Backup Path Setting
Select System > Database Management > Database Backup Path Set. The following dialog box is displayed:
Click Browser, select a backup path, and click OK. 11
Software Management
Caution: During software installation, set the path for backing up the database as prompted. If the path is not preset, the system cannot back up the database. Do not make the path for backing up the database in the same drive as the installation path of this system or set the path for backing up the database on the desktop or in the root directory of the drive.
12
Personnel Management
Personnel Management Department Management Before managing personnel of the company, you need to describe and manage the organizational structure of the company. When you use the system for the first time, the system has a default tier-1 department whose name is Company Name and number is 1. The department can be modified but cannot be deleted. Department management functions include adding a department, editing a department, and deleting a department.
Add Department
Select Personnel > Department > Add. The page for adding a department is displayed. Description of fields: Department Name: A department name can be any characters or a combination of up to 50 characters. Department Number: If a department number is needed, the department number cannot be repeated and the total length of the department number cannot exceed 50 bytes. Parent Department: When adding a department, select a department as the upper-level department of the new department or select an upper-level department from the menu.
After editing information, click OK. Or click Cancel to cancel the operation. Caution:
"Parent Department" is an important parameter for determining the organizational structure of the company. Be sure to select a correct parent department.
You can also add a department by importing department information from other software or documents to this system. The specific operation procedure is the same as that of “Import Personnel”. For details, see “Import Personnel”.
After adding a department, right-click any department in the department list and select Tree Show. The following page is displayed:
13
Personnel Management
Edit Department
If a department or the organizational structure of the company is changed, you can modify the information, for example, department name, department number or parent department, by using the edit function.
Select Personnel > Department, select a desired department, and click Edit. The specific operation procedure is the same as that for adding a department.
Delete Department
To cancel a department, select the department and click Delete or directly click Delete behind the department.
Select Personnel > Department, select a desired department, and click Delete. The following message is displayed:
Click OK. Caution: Do not delete or modify a department at random. If you delete or modify a department, the personnel belonging to the department will not have a management department and some historical data cannot be queried. If you really need to be delete or modify a department, transfer personnel of the department to another department first.
Log Entries
Log entries record historical operations on the system. All operations are recorded in the form of list. On the department page, personnel page, and issue card page, the log entry button is available. Click the button to display related records.
Personnel Management Before using or managing the system, you need to personnel in the system or import personnel information in other software to this system. 14
Personnel Management
Add Personnel
Select Personnel > Personnel > Add. The page for adding a person is displayed.
The following describes the fields: Personnel Number: The value range is 1 to 65534. Department: Click the drop-down box. The window for selecting a department is displayed. Select a department and double-click or click OK. Name: The name length is shorter than 40. Card Number: The value range is from 1 to 9999999999. It can be typed manually or got by card issuer. : The length range is 6 -10 digits. Please set the proper according to the lock with existed keypad numbers. Picture: The best size is 120x140 pixel and the format must be JPG. Employee Date: The current date is used by default. Terminal Management: including common and super .
Click Details. For page for editing details is displayed.
15
Personnel Management
Click Alternative Access Levels. The page for setting access control is displayed.
Alternative Access Levels: Select an access level and set the start date and end date of a valid period. Valid Time is set for temporary access control, that is, doors can be opened in the valid period. If you do not select the option, the access control is always effective by default. Note: Only when the Access Control finished setting, can you do the operations above.
After editing personnel information, click OK. The added person is displayed in the personnel list. Click Save and Continue to continue to add persons.
Batch Add Personnel
Caution:
To batch add persons, you need to select an object to copy. When no personnel information is available, the batch adding function cannot be used.
The length of personnel numbers of persons to be batch added cannot exceed eight bytes. Only 1000 persons can be batch added at a time.
Select a person that will be copied as an object and click Batch Add Personnel.
16
Personnel Management
Number Format: format of personnel number. “(*)” indicates wildcard. Take care not to delete or modify the wildcard. Wildcards“(*)”width: valid width of wildcard. It mainly limits the number of digits in the From and To edit boxes. Select the fields Name to copy: information of batch added personnel that is the same as information of the copied person.
After setting the preceding parameters, select fields to be copied on the right and click OK.
After data is saved, close the window and click Personnel again. The personnel list is changed to the following:
17
Personnel Management
Edit and Delete Personnel
For the preceding functions, you can select a person and click Edit. On the editing page, modify information and click OK. Or select a person and click Delete to delete the person. Note: After a person is deleted, the information about the person in the database is also deleted.
Import Personnel
If electronic personnel archives already exist, import the archives to this system through the import function.
Click Import. The page for editing import is displayed.
Target file: Click Browse and select a file to be imported. File format: Select the format of a file to be imported. Caution:
Excel files must be in the .xls format.
A TXT file must contain fields of corresponding personnel information, for example, personnel number, name, and department number.
After selecting the file format and target file (a file in the corresponding format must be available locally), click Next.
18
Personnel Management
Select fields to be imported.
indicates selecting all,
indicates deselecting the item selected by using mouse, and following figure shows data to be imported:
indicates selecting a single item, indicates deselecting all. The
Click Next and select corresponding data source fields.
Click Next. The import progress bar is displayed. After import is complete, close the window.
19
Personnel Management
Issue Card Allocate card numbers to personnel. You can allocate a card number when a person is added or allocate a card number through the Issue Card menu.
Instructions for card issuer
The card issuer is connected to the PC through a USB port. Click the box for entering a card number and swipe a card on the card issuer. The card number is automatically displayed in the box.
Issue Card
Select Personnel > Issue Card and click Add, or select a person in the personnel information list, right-click, and select Add. The following dialog box is displayed:
Select a person, enter the card number, and click OK.
Modify or Edit Card Number
In the personnel list, select a personnel card number and click Edit or Delete to modify the card number or delete the selected object.
20
Device Management
Device Management Area Management Area is a concept of space. It helps s manage devices in the specified area. After an area is set, you can filter devices (doors) based on the area during real-time monitoring. By default, an area whose name is “Area Name" and number is 1 exists in the system. Area setting operations include adding an area, editing an area, and deleting an area.
Add Area
Select Device > Area > Add. The page for adding an area is displayed:
The fields are described as follows: Area Name: It is defined by any words or numbers. For example: Front Door or 3 Floor. Area Code: It must be unique numbers. Parent Area: This parameter is mandatory. It decides the area framework of the company.
After setting the preceding parameters, click OK.
Delete Area
Select an area and click Delete. In the dialog box displayed, click Yes.
Edit Area
Select an area and click Edit. On the page for editing an area, modify related parameters.
Device Management After parameters about communication between the system and a smart lock are set, the system can communicate with the smart lock. In the system, view the information about the connected smart lock.
Add Device
1. Select Device > Device > Add.
21
Device Management
The fields are described as follows: Device Name: A device name can be any characters. A combination of up to 50 characters can be used. Area: area where a device is located. Communication Mode: communication over USB drive. Import U-Disk: Click to import a device file. Device Number/Type: After a device file is imported, the file is displayed automatically.
After setting the preceding parameters, click OK. The system attempts to connect the current device.
If the device is connected successfully, the system will read extension parameters of the device and information about the device is displayed in the device list.
2.
Select Device > Search Smart Lock.
Click Search U-Disk.
22
Device Management
After a device is searched, click Add U-Disk. In the dialog box displayed, enter the device name, select an area for the device, and click OK. The device is added to the device list.
Edit or Delete Device
The system displays current smart locks in the scope of all permissions. You can edit smart locks here. If you need to add or delete a smart lock, perform related operations in device management.
Select a smart lock and click Edit or Delete to modify or delete the smart lock.
Search Device
Select Device > Device > Search. A dialog box is displayed. Enter related information and click OK.
U-Disk Management USB drive management includes importing data, exporting data, and importing record data.
Select Device > U-Disk Management. The U-Disk Management page is displayed.
23
Device Management
Import from U-Disk
Import data in an USB drive to the system.
On the U-Disk Management page, click Import from U-Disk.
After data is imported successfully to the system, the data is displayed on the U-Disk Management page, as shown in the following figure:
You can select corresponding personnel to update the personnel in the local computer. After the personnel are updated, the personnel of corresponding numbers in the local computer are changed to 24
Device Management
the personnel you have just selected.
Export to U-Disk
Export data in the system to the specified device.
On the U-Disk Management page, click Export to U-Disk.
In the list on the left, select a and click s, click
to move the to the right. To export all
to move all s to the right.
1. Export data to the local computer.
Select personnel to be exported and click Export data to local. The following page is displayed:
Select the path for saving the data and save the data. The system prompts that the operation is successful. Click OK. 2. Export data to a USB drive.
Select personnel to be exported, select the file type and algorithm in the drop-down box, and click Export data to U-Disk.
25
Device Management
After the data is exported successfully, you can check whether corresponding data already exists in the USB drive. Caution:
When you export data to a USB drive or import data from a USB drive, make sure that the USB drive is correctly connected to the computer and corresponding data exists in the USB drive.
File types include “.DAT” and “.U”. Data in a .DAT file is ed from a fingerprint lock by using algorithm 9.0. When you select .DAT for the file type, the algorithm must be algorithm 9.0.
Import Record Data
On the U-Disk Management page, click Import record from U-Disk.
1. Import record from U-Disk Import record data in a USB drive to the system.
Click Import record from U-Disk. When records exist in the USB drive, the data is imported to the system, as shown in the following figure:
26
Device Management
2. Export Data to Local Export record data in the system to a local computer.
Click Export Data to Local and select a local storage path. When records exist in the system, the data is imported to the local computer.
Open a file that is saved in the local computer. The following information is displayed:
3. Delete Records Delete record data in the system.
Select a record on the left and click Delete record. The record is deleted.
27
Access Control
Access Control It is used to enable/disable open specified locks under proper timetable. But you need to set the option of Access Timetable, Holiday, Access Level in advance.
Access Timetable The system can define up to 255 timetable. For each timetable, you can define, during a week, you can define up to three intervals for each day and three holiday types for each timetable. Each interval is the valid interval in 24 hours of each day. The format of each interval for a timetable: HH: MM-HH: MM, this is accurate to minutes in the 24-hour system. Initially, by default the system has access control time table named [Accessible 24 hours]. This time period can be modified but cannot be deleted. The can add Access Control Timetable that can be modified.
Add Timetable
Select Access Control > Timetable > Add. The page for setting a time segment is displayed.
The parameters are as follows: Timetable Name: Any character, up to a combination of 50 characters. Remarks: Detailed description of the current timetable, including an explanation of the current timetable and primary applications, facilitating the or other s with same level to view timetable information. The field is up to 70 characters. Holiday Type: Three holiday types can be defined. The timetable of each type can be different. When adding holidays, you must specify the holiday type. In the access control system, the priority of holidays is higher than that of common weekdays. 28
Access Control
For example, the Children's Day in 2014 is Sunday (June 1st). When adding holidays, you can set the Children's Day as holiday type 1. When June 1st, 2014 arrives, the equipment manages access control timetable according to the preset holiday type 1, instead of the preset timetable on Sunday. Start Time: Start time of a timetable. End Time: End time of a timetable. Note:
If the holiday type of a timetable is not set, the access is denied in 24 hours by default.
A maximum of three timetable can be set in a day.
In the time axis of each day in a week and three holiday types, click where time starts and drag the mouse to where time ends, or click Start Time and End Time in the lower part of the window to set a time segment. To modify or delete a timetable, right-click in the time axis and select Modify time or Delete time, as shown in the following figure:
After setting the preceding information, click OK to return to the list of access control time segments.
Edit or Delete Timetable
Edit: In the time segment list, double-click a time segment or select a time segment and click Edit. On the page for editing a time segment, modify the time segment and click OK. The modified time segment is saved and displayed in the time segment list. Delete: In the time segment list, select a time segment and click Delete. Click Yes to delete the time segment or click Cancel to cancel the operation. You cannot delete an access control time segment that is currently in use.
29
Access Control
Holidays The Access Control Time of a holiday may differ from that of a weekday. For easy operation, the system provides holiday settings to set access control time for holidays. Access Control Holiday Management includes Add, Modify and Delete Access Control Holiday.
Add Holiday
Three holiday types are ed, each including up to 32 holidays. To conduct special access level configuration on special dates, the can select special holidays for setting.
Select Access Control > Holidays > Add. The page for adding an access control holiday is displayed.
The parameters are as follows: Holiday Name: Any character, up to a combination of 50 characters. Holiday Type: Holiday Type 1/2/3, namely, A current holiday record belongs to these three holiday types and each holiday type includes up to 32 holidays. Start / End Date: Must meet the date format as "2012-1-1". The Start Date cannot be later than the End Date otherwise the system will prompt an error. The year of the start date Start Date cannot be earlier than the current year, and the holiday can not span years. Recurring: Yes or No. The default is "No". Annual cycle means that a holiday does not require modification in different years. For example, the Near Year's Day is on January 1 each year, and can be set as "Yes". For another example, the Mother's Day is on the second Sunday of each May, so its date is not fixed and should be set as "No".
After editing information, click OK. The holiday name is displayed in the list.
Edit Holidays
In the access control holiday list, double-click an access control holiday or select an access control holiday and click Edit. The page for editing an access control holiday is displayed. Modify the holiday and click OK.
Delete Holidays
In the access control holiday list, select an access control holiday and click Delete. Then click Yes to delete the holiday or click Cancel to cancel the operation. The access control holiday that is currently in 30
Access Control
use cannot be deleted.
Access Levels Access levels means in a specific time period, which door or door combination can be opened through verification.
Add Access Level
Select Access Control > Access Level > Add. The page for adding an access level is displayed.
Set various parameters: Set Access Level Name (cannot be repeated), select Access Control Timetable, and select door combination and personnel.
Select a person from the Alternative Personnel list and click
to move the person to the
selected personnel list.
Click OK. The added access level is displayed in the list. Note:
Select the doors in the access levels as multi-choice, so you can select different locks.
When adding personnel, if selected personnel exist in the current access level, the system can not add again.
Two levels with the same timetable and door combination are not allowed in the system.
Personnel Access Level Setting
Select an access level and click Personnel Access Level Setting. The page for setting access levels is displayed.
31
Access Control
Select a person and click Delete From Access Levels to delete the access level of the person.
32
Appendix
Appendix FAQs Q: How to use the card issuer? A: Select a person to issue cards and connect the card issuer to a PC through a USB port. Click the box for entering a card number and swipe a card on the card issuer. The card number is automatically displayed in the box. Q: I want to set s for all personnel in the Finance Department of the company? How do I operate? A. First of all, set roles in system settings: 1. Create a role and configure various functions to be used by the role. 2. Add a , set information, and select the role you set for the . An is added. 3. Follow the procedure to add other s. Q: How to adjust the department of a person? A: To adjust the department of a person, in the personnel list, select a person and click Edit. The detailed information about the person is displayed. In the department option, modify the department of the person. Q: How to set access control levels for visitors? A: The procedure for setting access control levels is as follows: 1. Add the personnel to the system and enter related information. 2. Select access control levels suitable to the personnel. If no suitable access control levels are available, enter the access control system and add related settings. 3. Set a valid period, that is, start date and end date when they need to use access control levels. Q: How to cancel an access control level? A: The following methods can be used to cancel an access control level: 1. Disable access control: In the personnel list, select a person and click Edit. The detailed information about the person is displayed. In the access control setting, delete the access level and personnel group for opening doors using multiple cards. 2. Delete a person: In the personnel list, select a person and click Delete. The person is deleted from the system and corresponding access control information is deleted. 3. In Personnel Access Control Setting, select an access level and click Delete from Access Levels.
33
Appendix
SOFTWARE PRODUCT LICENSE The SOFTWARE PRODUCT is protected by copyright laws and international copyright treaties, as well as other intellectual property laws and treaties. The SOFTWARE PRODUCT is licensed, not sold. 1. GRANT OF LICENSE. This EULA grants you the following rights: Installation and Use. You may install and use an unlimited number of copies of the SOFTWARE PRODUCT. Reproduction and Distribution. You may reproduce and distribute an unlimited number of copies of the SOFTWARE PRODUCT; provided that each copy shall be a true and complete copy, including all copyright and trademark notices, and shall be accompanied by a copy of this EULA. Copies of the SOFTWARE PRODUCT may be distributed as a standalone product or included with your own product. 2. DESCRIPTION OF OTHER RIGHTS AND LIMITATIONS. Limitations on Reverse Engineering, Recompilation, and Disassembly. You may not reverse engineer, decompile, or disassemble the SOFTWARE PRODUCT, except and only to the extent that such activity is expressly permitted by applicable law notwithstanding this limitation. Separation of Components. The SOFTWARE PRODUCT is licensed as a single product. Its component parts may not be separated for use on more than one computer. Software Transfer. You may permanently transfer all of your rights under this EULA, provided the recipient agrees to the of this EULA. Termination. Without prejudice to any other rights, the Author of this Software may terminate this EULA if you fail to comply with the and conditions of this EULA. In such event, you must destroy all copies of the SOFTWARE PRODUCT and all of its component parts. Distribution. The SOFTWARE PRODUCT may not be sold or be included in a product or package which intends to receive benefits through the inclusion of the SOFTWARE PRODUCT. The SOFTWARE PRODUCT may be included in any free or non-profit packages or products. 3. COPYRIGHT. All title and copyrights in and to the SOFTWARE PRODUCT(including but not limited to any images, photographs, animations, video, audio, music, text, and "applets" incorporated into the SOFTWARE PRODUCT), the accompanying printed materials, and any copies of the SOFTWARE PRODUCT are owned by the Author of this Software. The SOFTWARE PRODUCT is protected by copyright laws and international treaty provisions. Therefore, you must treat the SOFTWARE PRODUCT like any other copyrighted material except that you may install the SOFTWARE PRODUCT on a single computer provided you keep the original solely for backup or archival purposes. LIMITED WARRANTY NO WARRANTIES.
34
Appendix
The Author of this Software expressly disclaims any warranty for the SOFTWARE PRODUCT. The SOFTWARE PRODUCT and any related documentation is provided "as is" without warranty of any kind, either express or implied, including, without limitation, the implied warranties or merchantability, fitness for a particular purpose, or no infringement. The entire risk arising out of use or performance of the SOFTWARE PRODUCT remains with you. NO LIABILITY FOR DAMAGES. In no event shall the author of this Software be liable for any damages whatsoever (including, without limitation, damages for loss of business profits, business interruption, loss of business information, or any other pecuniary loss) arising out of the use of or inability to use this product, even if the Author of this Software has been advised of the possibility of such damages.
Acknowledgment of Agreement. I have carefully read and understand this Agreement, ZKTeco, Inc.’s Statement. If YOU ACCEPT the of this Agreement: I acknowledge and understand that by ACCEPTING the of this Agreement. IF YOU DO NOT ACCEPT the of this Agreement. I acknowledge and understand that by refusing to accept these , I have rejected this license agreement and therefore have no legal right to install, use, or copy this Product or the Licensed Software that it incorporates.
35
3 6
Related Documents 171j1w
Biolock Access Control Manual 6e414x
December 2019 49
Manual Rfid Access Control fk43
December 2019 135
Access Control 6o6z5q
November 2022 0
Access Control Essentials Guide f69c
August 2020 0
August 2020 0
