Autocom 2013.3 Activation Autocom Cdp+ 2013.3 Installation Instruction x6j66

Autocom 2013.3 Activation Autocom cdp+ 2013.3 installation instruction As we all know Autocom 2013.3 need to activation before using, And customers need send Autocom FileActivation.xml to Activation Autocom 2013.3 or customers can use Autocom delphi keygen 2013.3 to do Autocom 2013.3 Activation. Below OBD2Tuning sharing Autocom 2013.3 Activation Autocom cdp+ 2013.3 installation instruction. VIP order Bluetooth Auto 2013.3 with Auto cdp+ cars trucks cable

Autocom 2013.3 Activation Autocom cdp+ 2013.3 installation instruction: Step 1. TURN OFF your internet connection! Step 2. Insert a USB-memory stick with at least 1MB free space! Step 3. SETUP software ( start.exe ) Step 4. write product id

CDP CARS ID: a-710-479 CDP TRUCKS ID: a-710-245 Delphi/CDP+ CARS ID: a-710-142 Delphi/CDP+ TRUCKS ID: a-710-210 Step 5. Write the S/N and Hardware Key CDP CARS : serial number; 30250, HW key; MNZTTOOCNHVE CDP TRUCKS : serial number; 39071, HW key; PUKRJOIVQTYX Delphi/CDP+ CARS SERIAL: 100251 HARDWAREKEY: OPCSPRBDMRMQ Delphi/CDP+ TRUCKS SERIAL: 100251 HARDWAREKEY: MALKZDLZSASU Step 6. On the disc, copy all files inside folder “Patch Files”, into: C: C:Program FilesDelphi DiagnosticsDS150E(autocom cdp) And yes, you want to overwrite the old files. Step 7. Contine to Software activation page, click ON '' Activate via USB '' Step 8. Insert a USB-memory stick with at least 1MB free space Step 9. and you will have the '' FileActivation.xml '' file in USB-memory stick Step 10. Post this FileActivation.xml file to keygen Step 11. Get new a FileActivation.xml file. Step 12. Copy new FileActivation.xml file into USB-memory stick . Step 13. Connect to USB-memory stick to computer. software will get infos in. if not you can slect to manuel mode and open xml file eject to usb-memory software will open then will have an error ( Failed to load vehicle ...... )