Antenna 1z33w
This document was ed by and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this report form. Report r6l17
Overview 4q3b3c
& View Antenna as PDF for free.
More details 26j3b
- Words: 40,901
- Pages: 186
790 – 2200 MHz Base Station Antennas for Mobile Communications
Antennen . Electronic
Photo on title page: XPol- with cut through 3-dimensional farfield diagram of radiation pattern. Catalogue Issue 01/01 All data published in previous catalog issues hereby becomes invalid. We reserve the right to make alterations in accordance with the requirements of our customers.
Please note: As a result of more stringent legal regulations and judgements regarding product liability, we are obliged to point out certain risks that may arise when products are used under extraordinary operating conditions.
The mechanical design is based on the environmental conditions as stipulated in ETS 300 019-1-4, which include the static mechanical load imposed on an antenna by wind at maximum velocity. Extraordinary operating conditions, such as heavy icing or exceptional dynamic stress (e.g. strain caused by oscillating structures), may result in the breakage of an antenna or even cause it to fall to the ground. These facts must be considered during the site planning process.
The details given in our data sheets have to be followed carefully when installing the antennas and accessories. The installation team must be properly qualified and also be familiar with the relevant national safety regulations.
“Quality leads the way” Being the oldest and largest antenna manufacturer worldwide, we take on every day the challenge arising from our own motto. One of our basic principles is to look always for the best solution in order to satisfy our customers. Our quality assurance system conforms to DIN EN ISO 9001 and applies to the product range of the company: Antenna systems, communication products as well as active and ive distribution equipment.
2
XPol F-s harmonically adapted to existing decoration elements on a roof-top in Bavaria/.
3
Base Station Antennas for Mobile Communication Networks: GSM 900 NMT TACS AMPS CDMA GSM 1800 PCS DECT UMTS WLL
List of available catalogues for Mobile Communication Antennas and Accessories – 790 – 2200 MHz Base Station Antennas – 27 – 512 MHz Base Station Antennas
s logue a t a c sted The li re also M a D-RO C n o ble availa
– Ground-to-Air Communication Antennas – Antennas for Trains and Buses – 80 / 160 MHz Filters, Combiners, Amplifiers for Mobile Communication – 450 MHz Filters, Combiners, Amplifiers for Mobile Communication – 900 / 1800 MHz Filters, Combiners, Amplifiers for Mobile Communication
4
Kathrein Antennas Product Description (Type)
XXPol A- 900/1800 C 65°/60° 17.5/18dBi 2°–8°T/2°T
Polarization(s): (X) Dual +45°/ –45° (V) Vertical
Antenna Family
Frequency Range(s)
Integrated Combiner
Horizontal Half-power Beam Width(s)
Gain Value(s)
Fixed / Variable Electrical Tilt(s)
5
Summary of Types The articles are listed by type number in numerical order.
Type No.
Page
728 ...
Type No.
Page
733 ...
Type No.
Page
Type No.
Page
736 078
106
737 308
157
728 684
78
733 677
169 ...
736 347
129
737 385
99
728 685
77
733 678
169 ...
736 348
129
737 398
183
733 679
169 ...
736 349
132
737 547
86
733 680
169 ...
736 350
126
737 548
88
730 ... 730 360
82
733 695
77 ...
736 351
126
737 549
97
730 368
83
733 736
77 ...
736 352
131
737 735
84
730 370
91
736 361
144
737 849
102
730 374
99
734 ...
736 618
100
737 906
103
730 376
87
734 304
114
736 622
89
737 965
159
730 378
96
734 310
114
736 624
141
737 966
159
730 380
98
734 314
116
736 668
90
737 967
159
730 382
100
734 318
117
736 801
155 ...
737 971
171 ...
730 676
82
734 319
117
736 802
155 ...
737 972
170 ...
730 677
82
734 320
117
736 803
155 ...
737 973
170 ...
730 691
84
734 328
118
736 804
155 ...
737 974
170 ...
734 330
118
736 805
155 ...
737 975
170 ...
734 342
119
736 854
89
737 976
171
734 360
175
736 855
89
737 978
170 ...
734 361
175
736 858
90
734 362
175
736 863
93
738 ...
731 ... 731 651
169
732 ... 732 317
178
734 363
175
736 864
93
738 018
107
732 318
178
734 364
175
736 866
95
738 020
108
732 319
179
734 365
175
736 900
101
738 021
108
732 321
178
736 902
101
738 144
109
732 322
178
735 ...
736 935
143
738 187
135
732 327
178
735 141
115
738 192
128
732 433
87
735 147
116
737 ...
738 407
84
732 447
82
735 700
180
737 031
142
738 440
181
732 448
83
735 727
76
737 190
136
738 445
65
732 480
91
735 811
85
737 303
157
738 446
65 ...
732 689
88
737 304
157
738 449
133 ...
732 690
85
736 ...
737 305
157
738 450
123 ...
732 691
83
736 016
115
737 306
157
738 454
137 ...
732 967
91
736 077
104
737 307
157
738 546
169 ...
6
Summary of Types The articles are listed by type number in numerical order.
Type No.
Page
Type No.
Page
Type No.
Page
Type No.
738 573
146
739 643
20
741 493
103
K 63 ...
738 580
105
739 646
27
741 558
127
K 63 20 62 1
155
738 664
132
739 648
27
741 571
148
K 63 20 62 7
155
738 779
130
739 649
30
741 572
148
K 63 20 63 1
155
738 908
182
739 650
31
741 622
22
K 63 20 63 7
155
739 651
26
741 623
36
K 63 20 64 1
155
739 655
29
741 717
16
K 63 20 64 7
155
739 ...
Page
739 129
112
739 658
28
741 718
16
K 63 22 62 1
158
739 131
112
739 660
30
741 784
48 ...
K 63 22 63 1
158
739 134
113
739 662
31
741 785
17
K 63 22 64 1
158
739 136
113
739 695
43
741 790
138
K 63 23 60 61
160
739 404
135
739 698
44
741 794
41 ...
K 63 23 60 67
161
739 418
96
739 707
45
741 880
66
K 63 23 61 01
160
739 489
37 ...
739 708
45
741 987
46 ...
K 63 23 61 07
161
739 490
38
739 710
47
741 989
49 ...
K 63 23 61 51
160
739 491
38
739 785
134
K 63 23 61 57
161
739 494
39
739 854
86
K 63 55 8
156
739 495
40
739 856
100
742 033
167
K 63 56 8
156
739 496
40
739 927
36
742 034
167
739 498
42
739 990
81
742 035
167
K 73 ...
739 619
18
742 036
167
K 73 22 67
80
739 620
18
741 ...
742 047
64
K 73 45 64 7
79
739 622
19
741 067
94
742 113
176
739 623
21
741 214
44
742 149
147
739 624
24
741 264
39
742 150
92
K 75 11 61
124
739 630
23
741 316
52
742 151
62
K 75 11 67
124
739 632
19
741 320
54
742 152
63
K 75 15 64 1
125
739 633
20
741 322
56
K 75 15 64 7
125
739 634
21
741 324
58
K 61 ...
739 635
23
741 325
53
K 61 14 02
76
739 636
24
741 326
55
K 61 14 03
76 ...
739 637
25
741 327
57
K 61 14 04
76 ...
739 638
32
741 328
59
K 61 14 05
76 ...
739 639
33
741 336
60
K 61 33 5
184
739 640
34
741 344
61
K 61 33 6
184
742 ...
K 75 ...
7
Directional antenna designs: A-s The Advanced Antenna Technology for Cross Polarization
Compact design
Small size and elegant design characterize this new antenna familiy.
Closed fiberglass housing
The fiberglass housing totally covers the internal antenna components. The special design reduces the sealing areas to a minimum and guarantees the best weather protection.
Environmental influences
The design of Kathrein antennas is based on fundamental engineering knowledge and also on decades of practical experience, during which the various constructions and materials used have proved their outstanding reliability.
Environmental conditions
Kathrein cellular antennas are designed to operate under the environmental conditions as described in ETS 300 019-1-4 class 4.1 E. The antennas exceed this standard with regard to the following items: – Low temperature: – 55 °C – High temperature (dry): + 60 °C
Environmental tests
Kathrein antennas have ed environmental tests as recommended in ETS 300 019-2-4. The homogenous design of Kathrein’s antenna families use identical modules and materials. Extensive tests have been performed on typical samples and modules.
Long service life
According to our own experience, the outstanding mechanical characteristics of Kathrein antennas result in an antenna service life of over 15 years.
65° and 90° half-power beam width Large variety of gain values Electrical downtilt
The customer can choose from 65° and 90° half-power beam widths. Gain values from 7.5 dBi up to 18 dBi, and electrical downtilts of up to 12° are available.
Low intermodulation After many years of experience in the construction of antennas and after products (typically –150 dBc) intensive research into the effects of intermodulation, we have been able to optimize the material used for A-s (the given value refers to 3rd order products measured with 2 carriers of 20 W each). Broadband design
These antennas primarily cover the frequency range from 806 to 960 MHz, and are also used for Dual-band antennas. Therefore the variety of antennas used can be kept to a minimum.
Excellent grounding
The A-s are DC grounded according EN 50083-1. The inner conductors are DC grounded.
Multi-functional installation hardware
All models are equipped with 2 fixing points. The A-s can be wall mounted without any additional hardware. For mast mounting, stainless steel brackets and mechanical downtilt kits are available. To assist the installation technicians in aligning the antennas, an azimuth adjustment tool can be supplied (see Accessories).
8
Directional antenna designs: Eurocell s (s) The Approved Antenna Family for Vertical Polarization
Compact, elegant design
Small size and elegant design are the distinguishing features of this antenna family, characteristics which predestine these antennas for use in modern cellular networks.
Fiberglass radome
The grey fiberglass radomes of these antennas are very stable and extraordinarily stiff. They are resistant to ultraviolet radiation and can also be painted to match their surroundings.
Environmental influences
The design of Kathrein antennas is based on fundamental engineering knowledge and also on decades of practical experience, during which the various constructions and materials used have proved their outstanding reliability.
Environmental conditions
Kathrein cellular antennas are designed to operate under the environmental conditions as described in ETS 300 019-1-4 class 4.1 E. The antennas exceed this standard with regard to the following items: – Low temperature: – 55 °C – High temperature (dry): + 60 °C
Environmental tests
Kathrein antennas have ed environmental tests as recommended in ETS 300 019-2-4. The homogenous design of Kathrein’s antenna families use identical modules and materials. Extensive tests have been performed on typical samples and modules.
Long service life
According to our own experience, the outstanding mechanical characteristics of Kathrein antennas result in an antenna service life of over 15 years.
Large variety of half-power beam widths and gains
The customer can choose from more than 75 versions, e.g. different half-power beamwidths of 65°, 90°, 105°, 120° and 160°, gain values from 6.5 to 18.5 dBi and electrical downtilts of up to 15°.
Electrical downtilt
Low intermodulation After many years’ experience in the construction of antennas and after products (typically –150 dBc) intensive research into the effects of intermodulation, we have been able to optimize the material used for Eurocell s (the given value refers to 3rd order products measured with 2 carriers of 20 W each). Broadband design
2 groups of antennas are available for the frequency ranges: 870 – 960 MHz, optimized for GSM, 806 – 960 MHz, for other cellular networks.
Excellent grounding
The Eurocell s are DC grounded according EN 50083-1. The inner conductors are DC grounded for DC loop monitoring.
Multi-functional installation hardware
Depending on their length, the antennas are equipped with up to 3 fixing points. The Eurocell s can be wall mounted without any additional hardware. For mast mounting, stainless steel brackets and mechanical downtilt kits are available. To assist the installation technicians in aligning the antennas, an azimuth adjustment tool can be supplied (see Accessories).
9
Directional antenna designs: F-s Harmony of Design and Technology
Slim, unobtrusive design
This antenna family is especially suitable for installation at optically sensitive sites.
Flat fiberglass radome
The max. radome depth is only 69 mm. Fiberglass material guarantees optimum performance with regards to stability, stiffness, UV resistance and painting. The colour of the radome is grey.
Environmental influences
The design of Kathrein antennas is based on fundamental engineering knowledge and also on decades of practical experience, during which the various constructions and materials used have proved their outstanding reliability.
Environmental conditions
Kathrein cellular antennas are designed to operate under the environmental conditions as described in ETS 300 019-1-4 class 4.1 E. The antennas exceed this standard with regard to the following items: – Low temperature: – 55 °C – High temperature (dry): + 60 °C
Environmental tests
Kathrein antennas have ed environmental tests as recommended in ETS 300 019-2-4. The homogenous design of Kathrein’s antenna families use identical modules and materials. Extensive tests have been performed on typical samples and modules.
Long service life
According to our own experience, the outstanding mechanical characteristics of Kathrein antennas result in an antenna service life of over 15 years.
Patented, gain-optimized radiating system
The reduction of the number of components down to just a few multi-functional parts has reduced the number of electrical and mechanical connection points, thus also Low intermodulation reducing the intermodulation products (the indicated value products (typically –150 dBc) refers to 3rd order products measured with 2 carriers of 20 W each). Large variety of half-power beam widths and gains Electrical downtilt
Versions with half-power beam widths of 33° to 200° are available (with an additional subreflector). Various gain values of up to 22 dBi and electrical downtilt options will aid network planners to select the version most suitable for the intended purpose.
Excellent grounding
The F-s are DC grounded according EN 50083-1. The inner counductors are DC grounded for DC loop monitoring.
Multi-functional installation hardware
The F-s can be wall mounted without any additional hardware. For mast mounting, stainless steel brackets and mechanical downtilt kits are available. To assist the installation technicians in aligning the antennas, an azimuth adjustment tool can be supplied (see Accessories).
10
Directional antenna designs: Special Directional Antennas For Particular Applications
Antennas for – tunnel use – railway use – micro cells (street use) – high gain link for repeaters The distinguishing features of these special versions, e.g. parabolic s or log. periodic antennas, are: – very small half-power beam width (high gain) – high sidelobe suppression – also Dual-band and Multi-band versions – bidirectional horizontal pattern.
LogPer
Par
BiDir 11
12
Directional Antennas Dual Polarization + 45°/ – 45°
800/900 MHz
Dual Polarization + 45°/ – 45°, Adj. el. downtilt
800/900 MHz
Directional Antennas Dual Polarization + 45°/ – 45°
1800/1900/2000 MHz
Dual Polarization + 45°/ – 45°, Adj. el. downtilt
1800/1900/2000 MHz
Directional Antennas Dual-band, Dual Polarization + 45°/ – 45°
900/1800 MHz
Dual-band, Dual Polarization + 45°/ – 45°, Adj. el. downtilt 900/1800 MHz Dual-band, Vertical Polarization
800/900/1800/2000 MHz
Directional Antennas Dual Polarization + 45°/ – 45°
UMTS (IMT 2000)
Directional Antennas Vertical Polarization
800/900 MHz
Vertical Polarization, Adj. el. downtilt
800/900 MHz
Vertical Polarization, Multi-unit
900 MHz
Directional Antennas Vertical Polarization
1800/1900 MHz
Omnidirectional Antennas Vertical Polarization
800/900 MHz
Dual-band, Vertical Polarization
900/1800 MHz
Vertical Polarization
1800 MHz
Vertical Polarization
2000 MHz
Indoor Antennas Single-band
900/1800 MHz
Multi-band
800/1900/2000 MHz
Indoor / Outdoor
900/1800/2000 MHz
Power Splitters and Tappers Accessories 13
14
Summary – Directional Antennas Dual Polarization + 45°/ –45° 800/900 Dual Polarization + 45°/ –45° Type
Type No.
Frequency range [MHz]
Height [mm]
XPol A- XPol A- XPol A-
900 900 900
30° 30° 30°
15.5 dBi 18.5 dBi 21 dBi
741 717 741 718 741 785
870 – 960 870 – 960 870 – 960
656 1296 2580
XPol A-
806–960
65°
9 dBi
739 619
806 – 960
XPol A-
806–960
65°
12.5 dBi
739 620
806 – 960
XPol A- XPol A- XPol A- XPol A-
806–960 806–960 806–960 806–960
65° 65° 65° 65°
15.5 15 15 15
dBi dBi dBi dBi
6°T 9°T 12°T
739 739 739 739
622 632 643 633
806 806 806 806
– – – –
XPol A- XPol A- XPol A- XPol A-
806–960 806–960 824–960 900
65° 65° 65° 65°
17 17 17 17
dBi dBi dBi dBi
6°T 9°T 6°T
739 739 741 739
623 634 622 635
806 806 806 880
XPol A- XPol A- XPol A- XPol A-
900 806–960 806–960 806–960
65° 65° 65° 65°
18 18 18 18
dBi dBi dBi dBi
6°T 9°T
739 739 739 739
630 624 636 637
870 806 806 806
XPol A-
900
90°
7.5 dBi
XPol A-
806–960
90°
11 dBi
XPol A- XPol A-
806–960 806–960
90° 90°
13.5 dBi 13.5 dBi
XPol A- XPol A- XPol A-
900 806–960 806–960
90° 90° 90°
XPol A- XPol A-
806–960 806–960
90° 90°
Connector position
Page
bottom bottom bottom
16 16 17
256
bottom or top
18
656
bottom or top
18
960 960 960 960
1296 1296 1296 1296
bottom or top bottom bottom bottom
19 19 20 20
– – – –
960 960 960 960
1936 1936 1936 2256
bottom or top bottom bottom bottom
21 21 22 23
– – – –
960 960 960 960
2580 2580 2580 2580
bottom bottom bottom bottom
23 24 24 25
739 651
870 – 960
256
bottom or top
26
739 646
806 – 960
656
bottom or top
27
6°T
739 648 739 658
806 – 960 806 – 960
1296 1296
bottom or top bottom
27 28
15.5 dBi 15.5 dBi 15.5 dBi
6°T
739 655 739 649 739 660
870 – 960 806 – 960 806 – 960
1936 1936 1936
bottom or top bottom or top bottom
29 30 30
17 dBi 17 dBi
6°T
739 650 739 662
806 – 960 806 – 960
2580 2580
bottom or top bottom
31 31
824 – 960 824 – 960 806 – 960
1296 1996 2580
bottom bottom bottom
32 33 34
New Products
Dual Polarization + 45°/ –45° Adjustable Electrical Downtilt XPol A- XPol A- XPol A-
824–960 824–960 806–960
65° 65° 65°
15 dBi 16.5 dBi 17.5 dBi
2°–12°T 2°–10°T 0°– 17°T
739 638 739 639 739 640 New Products
15
A- Dual Polarization Half-power Beam Width
900 X 30°
XPol A- 900 30° 15.5dBi Type No.
741 717
Frequency range
870 – 960 MHz
Polarization
+45°, –45°
Gain
2 x 15.5 dBi
30°
Horizontal: Vertical:
Front-to-back ratio, copolar
> 30 dB
Isolation
> 30 dB
Impedance
50 Ω
VSWR
< 1.5
30° 27°
3
dB
10
Half-power beam width Copolar +45°/ –45°
0
Horizontal Pattern
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
500 Watt (at 50 °C ambient temperature)
27°
2 x 7-16 female
Connector position
10
Bottom 3
Weight
dB
Input
13 kg 0
Wind load
Frontal: 330 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
656 / 560 / 116 mm
Vertical Pattern
900 –45°
900 +45°
7-16
7-16
XPol A- 900 30° 18.5dBi Type No.
741 718
Frequency range
870 – 960 MHz
Polarization Gain
30°
+45°, –45° 2 x 18.5 dBi
Isolation Impedance VSWR
30° 15°
> 30 dB > 30 dB
< 1.5 < –150 dBc
Max. power per input
500 Watt (at 50 °C ambient temperature)
Connector position
0
Horizontal Pattern
50 Ω
Intermodulation IM3 (2 x 43 dBm carrier)
Input
3
15°
2 x 7-16 female
10
Bottom 3
Weight Wind load
20 kg Frontal: 680 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1296 / 560 / 116 mm
Mounting accessories are not included in the scope of delivery (see page 168)
dB
Front-to-back ratio, copolar
Horizontal: Vertical:
dB
10
Half-power beam width Copolar +45°/ –45°
0
Vertical Pattern
16
A- Dual Polarization Half-power Beam Width
900 X 30°
XPol A- 900 30° 21dBi Type No.
741 785
Frequency range
870 – 960 MHz
Polarization
+45°, –45°
Gain
2 x 21 dBi
30°
Front-to-back ratio, copolar
> 30 dB
Isolation
> 30 dB
Impedance
50 Ω
VSWR
< 1.5
30° 7°
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
400 Watt (at 50 °C ambient temperature)
Input Connector position
2 x 7-16 female
3 0
Horizontal Pattern
7° 10
Bottom 3
Weight
dB
Horizontal: Vertical:
dB
10
Half-power beam width Copolar +45°/ –45°
40 kg 0
Wind load
Frontal: 1460 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
2580 / 560 / 116 mm
Mounting accessories are not included in the scope of delivery (see page 168)
Vertical Pattern
900 –45°
900 +45°
7-16
7-16
17
A- Dual Polarization Half-power Beam Width
806 – 960 X 65°
XPol A- 806–960 65° 9dBi
739 619
Frequency range 806 – 880 MHz
880 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 8.5 dBi
2 x 9 dBi
Horizontal: Vertical:
Front-to-back ratio, copolar Cross polar ratio Maindirection Sector
0° ±60°
70° 70°
Horizontal: Vertical:
10
65° 68°
> 27 dB
> 27 dB
Typically: 25 dB > 10 dB
Typically: 25 dB > 10 dB
Isolation
0
Horizontal Pattern
> 30 dB
Impedance
50 Ω
VSWR
< 1.5
68°
10
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
350 Watt (at 50 °C ambient temperature)
3
Input
2 x 7-16 female
Connector position
0
Vertical Pattern
Bottom or top
Weight Wind load
3
dB
Half-power beam width Copolar +45°/ –45°
65°
125°
806–960
dB
Type No.
3 kg Frontal: 40 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
256 / 262 / 116 mm
800/900 –45°
800/900 +45°
7-16
7-16
XPol A- 806–960 65° 12.5dBi
739 620
Frequency range
120°
806–960 806 – 880 MHz
880 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 12 dBi
2 x 12.5 dBi
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
68° 29°
Horizontal: Vertical:
65° 27°
65°
10
3
dB
Type No.
0
Front-to-back ratio, copolar
> 30 dB
Isolation
> 30 dB
Impedance
50 Ω
VSWR
< 1.5
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
500 Watt (at 50 °C ambient temperature)
Connector position Weight Wind load
27°
10
2 x 7-16 female Bottom or top 6 kg Frontal: 110 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
656 / 262 / 116 mm
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
3
dB
Input
Horizontal Pattern
0
Vertical Pattern
18
A- Dual Polarization Half-power Beam Width
806 – 960 X 65°
XPol A- 806–960 65° 15.5dBi
739 622
Frequency range 806 – 880 MHz
880 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 15 dBi
2 x 15.5 dBi
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
65°
120°
806–960
68° 16°
Horizontal: Vertical:
65° 15°
10
3
dB
Type No.
0
Front-to-back ratio, copolar
> 30 dB
Isolation
> 30 dB
Horizontal Pattern
50 Ω
Impedance VSWR
< 1.4
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
600 Watt (at 50 °C ambient temperature)
Connector position
3
Bottom or top
Weight Wind load
10
2 x 7-16 female dB
Input
15°
0
10 kg
Vertical Pattern
Frontal: 230 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1296 / 262 / 116 mm 800/900 –45°
800/900 +45°
7-16
7-16
XPol A- 806–960 65° 15dBi 6°T
739 632
Frequency range
120°
806–960 806 – 880 MHz
880 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 14.5 dBi
2 x 15 dBi
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
68° 16°
Horizontal: Vertical:
65° 15°
65°
10
3
dB
Type No.
0
6°, fixed
6°, fixed
Sidelobe suppression for first sidelobe above horizon
≥ 14 dB
≥ 16 dB
Front-to-back ratio, copolar
> 28 dB
> 30 dB
Isolation
> 30 dB
> 32 dB
Impedance
50 Ω
50 Ω
VSWR
< 1.5
< 1.3
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
600 Watt (at 50 °C ambient temperature)
Input Connector position Weight Wind load
Horizontal Pattern
15°
10
3
2 x 7-16 female
dB
Electrical tilt
0
Vertical Pattern 6° electr. downtilt
Bottom 8 kg Frontal: 230 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1296 / 262 / 116 mm
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
19
A- Dual Polarization Half-power Beam Width
806 – 960 X 65°
XPol A- 806–960 65° 15dBi 9°T
739 643
Frequency range 806 – 880 MHz
880 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 14.5 dBi
2 x 15 dBi
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
68° 16°
65°
120°
806–960
Horizontal: Vertical:
65° 15°
10
3
dB
Type No.
0
9°, fixed
9°, fixed
Sidelobe suppression for first sidelobe above horizon
≥ 14 dB
≥ 16 dB
Front-to-back ratio, copolar
> 28 dB
> 30 dB
Isolation
> 30 dB
> 30 dB
Impedance
50 Ω
50 Ω
VSWR
< 1.5
< 1.3
Horizontal Pattern
15°
10
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
500 Watt (at 50 °C ambient temperature)
3
Input
Bottom
Weight Wind load
0
Vertical Pattern 9° electr. downtilt
2 x 7-16 female
Connector position
dB
Electrical tilt
8 kg Frontal: 230 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1296 / 262 / 116 mm
800/900 –45°
800/900 +45°
7-16
7-16
XPol A- 806–960 65° 15dBi 12°T
739 633
Frequency range
120°
806–960 806 – 880 MHz
880 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 14.5 dBi
2 x 15 dBi
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
68° 17°
Horizontal: Vertical:
65° 16°
65°
10
3
dB
Type No.
0
12°, fixed
12°, fixed
Sidelobe suppression for first sidelobe above horizon
≥ 14 dB
≥ 16 dB
Front-to-back ratio, copolar
> 28 dB
> 30 dB
Isolation
> 30 dB
> 30 dB
Impedance
50 Ω
50 Ω
VSWR
< 1.5
< 1.3
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
600 Watt (at 50 °C ambient temperature)
Input Connector position Weight Wind load
Horizontal Pattern
16° 10
3
2 x 7-16 female
dB
Electrical tilt
0
Vertical Pattern 12° electr. downtilt
Bottom 8 kg Frontal: 230 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1296 / 262 / 116 mm
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
20
A- Dual Polarization Half-power Beam Width
806 – 960 X 65°
XPol A- 806–960 65° 17dBi
739 623 806 – 880 MHz
880 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 16.5 dBi
2 x 17 dBi
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
68° 10°
Horizontal: 65° Vertical: 9.5°
Sidelobe suppression for first sidelobe above horizon
≥ 15 dB
Front-to-back ratio, copolar
> 30 dB
Isolation
> 30 dB
Impedance
50 Ω
VSWR
< 1.5
9.5°
Max. power per input
600 Watt (at 50 °C ambient temperature)
10
2 x 7-16 female
3 0
Bottom or top
Vertical Pattern
12 kg
first null-fill below horizon better or equal –25 dB below maximum gain
Weight Wind load
3 0
< –150 dBc
Connector position
10
Horizontal Pattern
Intermodulation IM3 (2 x 43 dBm carrier)
Input
65°
120°
806–960
dB
Frequency range
dB
Type No.
Frontal: 330 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1936 / 262 / 116 mm
800/900 –45°
800/900 +45°
7-16
7-16
XPol A- 806–960 65° 17dBi 6°T
739 634
Frequency range
120°
806–960 806 – 880 MHz
880 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 16.5 dBi
2 x 17 dBi
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
68° 10°
Horizontal: 65° Vertical: 6.5°
65°
10
3
dB
Type No.
0
6°, fixed
6°, fixed
Sidelobe suppression for first sidelobe above horizon
≥ 14 dB
≥18 dB
Front-to-back ratio, copolar
> 30 dB
> 30 dB
Isolation
> 32 dB
> 32 dB
Impedance
50 Ω
50 Ω
VSWR
< 1.5
< 1.3
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
600 Watt (at 50 °C ambient temperature)
Input Connector position Weight Wind load
Horizontal Pattern
9.5°
10
3
7-16 female
dB
Electrical tilt
0
Vertical Pattern 6° electr. downtilt
Bottom 12 kg Frontal: 330 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1936 / 262 / 116 mm
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
21
A- Dual Polarization Half-power Beam Width Fixed Electrical Downtilt
824 – 960 X 65° 9°
XPol A- 824–960 65° 17dBi 9°T
741 622
Frequency range 824 – 880 MHz
880 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 16.5 dBi
2 x 17 dBi
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
68° 10°
65°
120°
824–960
Horizontal: 65° Vertical: 9.5°
10
3
dB
Type No.
0
9°, fixed
9°, fixed
Sidelobe suppression for first sidelobe above horizon
≥ 14 dB
≥16 dB
Front-to-back ratio, copolar
> 30 dB
> 30 dB
Isolation
> 32 dB
> 32 dB
Impedance
50 Ω
50 Ω
VSWR
< 1.5
< 1.3
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
500 Watt (at 50 °C ambient temperature)
Input Connector position Weight Wind load
Horizontal Pattern
9.5°
10
3
2 x 7-16 female
dB
Electrical tilt
0
Vertical Pattern 9° electr. downtilt
Bottom 12 kg Frontal: 330 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1936 / 262 / 116 mm
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
800/900 –45°
800/900 +45°
7-16
7-16
22
A- Dual Polarization Half-power Beam Width
900 X 65°
XPol A- 900 65° 17dBi 6°T Type No.
739 635
Frequency range
880 – 960 MHz
Polarization
+45°, –45°
Gain
2 x 17 dBi
65°
120°
Horizontal: Vertical:
Electrical tilt
6°, fixed
Sidelobe suppression above horizon (0°– 40°)
≥ 20 dB
Front-to-back ratio, copolar
> 30 dB
Isolation
> 32 dB
Impedance
50 Ω
VSWR
< 1.3
65° 8.5°
3
dB
10
Half-power beam width Copolar +45°/ –45°
0
Horizontal Pattern
8.5°
< –150 dBc
Max. power per input
250 Watt (at 50 °C ambient temperature)
Input
2 x 7-16 female
Connector position
Bottom
Weight
10
3
dB
Intermodulation IM3 (2 x 43 dBm carrier)
0
Vertical Pattern 6° electr. downtilt
16 kg
Wind load
Frontal: 400 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
2256 / 262 / 116 mm
900 –45°
900 +45°
7-16
7-16
XPol A- 900 65° 18dBi Type No.
739 630
Frequency range
870 – 960 MHz
Polarization Gain
120°
65°
+45°, –45° 2 x 18 dBi Horizontal: Vertical:
Sidelobe suppression for first sidelobe above horizon
≥ 15 dB
Front-to-back ratio, copolar
> 30 dB
Isolation
> 32 dB
VSWR
50 Ω < 1.3 < –150 dBc
Max. power per input
600 Watt (at 50 °C ambient temperature)
Connector position Weight Wind load
0
Horizontal Pattern
Intermodulation IM3 (2 x 43 dBm carrier)
Input
3
7°
10
2 x 7-16 female Bottom or top 19 kg Frontal: 470 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
2580 / 262 / 116 mm
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
3
dB
Impedance
65° 7°
dB
10
Half-power beam width Copolar +45°/ –45°
0
Vertical Pattern first null-fill below horizon better or equal –25 dB below maximum gain
23
A- Dual Polarization Half-power Beam Width
806 – 960 X 65°
XPol A- 806–960 65° 18dBi
739 624
Frequency range 806 – 880 MHz
880 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 17.5 dBi
2 x 18 dBi
Half-power beam width Copolar +45°/ –45°
Horizontal: 68° Vertical: 7.5°
65°
120°
806–960
Horizontal: Vertical:
65° 7°
10
3
dB
Type No.
0
Front-to-back ratio, copolar
> 30 dB
Isolation
> 30 dB
> 30 dB
Horizontal Pattern
> 32 dB 50 Ω
Impedance VSWR
< 1.5
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
600 Watt (at 50 °C ambient temperature)
7°
Connector position
3
Bottom or top
Weight Wind load
10
2 x 7-16 female dB
Input
0
19 kg
Vertical Pattern
Frontal: 470 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
2580 / 262 / 116 mm 800/900 –45°
800/900 +45°
7-16
7-16
XPol A- 806–960 65° 18dBi 6°T
739 636
Frequency range
120°
806–960 806 – 880 MHz
880 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 17.5 dBi
2 x 18 dBi
Half-power beam width Copolar +45°/ –45°
Horizontal: 68° Vertical: 7.5°
Horizontal: Vertical:
65° 7°
65°
10
3
dB
Type No.
0
Electrical tilt
6°, fixed
Sidelobe suppression for first sidelobe above horizon
≥ 18 dB
Front-to-back ratio, copolar
> 30 dB
Isolation
> 32 dB 50 Ω < 1.5
7°
< 1.3
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
500 Watt (at 50 °C ambient temperature)
Input Connector position Weight Wind load
10
3
2 x 7-16 female
dB
Impedance VSWR
Horizontal Pattern
0
Vertical Pattern 6° electr. downtilt
Bottom 19 kg Frontal: 470 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
2580 / 262 / 116 mm
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
24
A- Dual Polarization Half-power Beam Width Fixed Electrical Downtilt
806 – 960 X 65° 9°
XPol A- 806–960 65° 18dBi 9°T
739 637
Frequency range 806 – 870 MHz
870 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 17.5 dBi
2 x 18 dBi
Half-power beam width Copolar +45°/ –45°
65°
120°
806–960
Horizontal: Vertical:
65° 7.5°
10
3
dB
Type No.
0
Electrical tilt
better 18 dB below maximum gain
Front-to-back ratio, copolar
> 30 dB
Isolation
> 32 dB 50 Ω
Impedance VSWR
Horizontal Pattern
< 1.5
7.5°
< 1.3
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
500 Watt (at 50 °C ambient temperature)
Input Connector position Weight Wind load
10
3
2 x 7-16 female
dB
Sidelobe suppression for first sidelobe above horizon
9°, fixed
0
Vertical Pattern 9° electr. downtilt
Bottom 19 kg Frontal: 470 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
2580 / 262 / 116 mm
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
800/900 –45°
800/900 +45°
7-16
7-16
25
A- Dual Polarization Half-power Beam Width
900 X 90°
XPol A- 900 90° 7.5dBi
870 – 960 MHz
Polarization
+45°, –45°
Gain
2 x 7.5 dBi
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
Front-to-back ratio, copolar
> 20 dB
Isolation
> 30 dB
Impedance
50 Ω
VSWR
< 1.3
90° 70°
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
300 Watt (at 50 °C ambient temperature)
Input Connector position
2 x 7-16 female
90° 180°
3 0
Horizontal Pattern
70°
10
Bottom or top 3
Weight
dB
Frequency range
739 651
dB
Type No.
3 kg 0
Wind load
Frontal: 40 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
256 / 262 / 116 mm
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
Vertical Pattern
900 –45°
900 +45°
7-16
7-16
26
A- Dual Polarization Half-power Beam Width
806 – 960 X 90°
XPol A- 806–960 90° 11dBi
739 646
90° 170°
806–960 806 – 880 MHz
880 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 10.5 dBi
2 x 11 dBi
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
90° 38°
Horizontal: Vertical:
Sidelobe suppression for first sidelobe above horizon
≥ 16 dB
Front-to-back ratio, copolar
> 20 dB
Isolation
> 30 dB
Impedance
50 Ω
VSWR
< 1.5
90° 36°
36°
< –150 dBc
Max. power per input
500 Watt (at 50 °C ambient temperature)
3 0
Vertical Pattern
Bottom or top
Weight Wind load
10
2 x 7-16 female
Connector position
0
Horizontal Pattern
Intermodulation IM3 (2 x 43 dBm carrier)
Input
3
dB
Frequency range
dB
Type No.
6 kg Frontal: 110 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
656 / 262 / 116 mm
800/900 –45°
800/900 +45°
7-16
7-16
XPol A- 806–960 90° 13.5dBi
739 648
90° 170°
806–960 806 – 880 MHz
880 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 13 dBi
2 x 13.5 dBi
Half-power beam width Copolar +45°/ –45° Sidelobe suppression for first sidelobe above horizon
Horizontal: Vertical:
90° 16°
Horizontal: Vertical:
90° 15°
≥ 16 dB
Front-to-back ratio, copolar
> 25 dB
Isolation
> 32 dB
Impedance
50 Ω
VSWR
< 1.5
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
600 Watt (at 50 °C ambient temperature)
Input Connector position Weight Wind load
2 x 7-16 female Bottom or top
3
dB
Frequency range
0
Horizontal Pattern
15°
10
3
dB
Type No.
0
Vertical Pattern
10 kg Frontal: 230 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1296 / 262 / 116 mm
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
27
A- Dual Polarization Half-power Beam Width Fixed Electrical Downtilt
806 – 960 X 90° 6°
XPol A- 806–960 90° 13.5dBi 6°T
739 658
Frequency range
90° 170°
806–960 806 – 880 MHz
880 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 13 dBi
2 x 13.5 dBi
Horizontal: Vertical:
90° 16°
Horizontal: Vertical:
Electrical tilt
6°, fixed
Sidelobe suppression for first sidelobe above horizon
≥ 15 dB
Front-to-back ratio, copolar
> 25 dB
Isolation
> 30 dB
< 1.5
15°
< 1.3 < –150 dBc
Max. power per input
500 Watt (at 50 °C ambient temperature)
Connector position Weight Wind load
0
Horizontal Pattern
Intermodulation IM3 (2 x 43 dBm carrier)
Input
3
50 Ω
Impedance VSWR
90° 15°
10
3
2 x 7-16 female
dB
Half-power beam width Copolar +45°/ –45°
dB
Type No.
0
Vertical Pattern 6° electr. downtilt
Bottom 8 kg Frontal: 230 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1296 / 262 / 116 mm
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
800/900 –45°
800/900 +45°
7-16
7-16
28
A- Dual Polarization Half-power Beam Width
900 X 90°
XPol A- 900 90° 15.5dBi
739 655
Frequency range
870 – 960 MHz
Polarization
+45°, –45°
Gain
2 x 15.5 dBi
Half-power beam width Copolar +45°/ –45° Sidelobe suppression for first sidelobe above horizon
Horizontal: Vertical:
90° 10°
≥ 15 dB
90° 170°
3
dB
Type No.
0
Horizontal Pattern
Front-to-back ratio, copolar
> 25 dB
Isolation
> 32 dB
Impedance
50 Ω
VSWR
< 1.3 10°
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
600 Watt (at 50 °C ambient temperature)
Input Connector position Weight Wind load
2 x 7-16 female Bottom or top 14 kg Frontal: 330 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1936 / 262 / 116 mm
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
3
dB
10
0
Vertical Pattern first null-fill below horizon better or equal –25 dB below maximum gain
900 –45°
900 +45°
7-16
7-16
29
A- Dual Polarization Half-power Beam Width
806 – 960 X 90°
XPol A- 806–960 90° 15.5dBi
739 649
90° 170°
806–960 806 – 880 MHz
880 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 15 dBi
2 x 15.5 dBi
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
90° 10°
Horizontal: 90° Vertical: 9.5°
Sidelobe suppression for first sidelobe above horizon
≥ 14 dB
Front-to-back ratio, copolar
> 25 dB
Isolation
> 32 dB
Impedance
50 Ω
VSWR
< 1.5
9.5°
< –150 dBc
Max. power per input
600 Watt (at 50 °C ambient temperature)
3 0
Bottom or top
Vertical Pattern
12 kg
first null-fill below horizon better or equal –25 dB below maximum gain
Weight Wind load
10
2 x 7-16 female
Connector position
0
Horizontal Pattern
Intermodulation IM3 (2 x 43 dBm carrier)
Input
3
dB
Frequency range
dB
Type No.
Frontal: 330 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1936 / 262 / 116 mm
800/900 –45°
800/900 +45°
7-16
7-16
XPol A- 806–960 90° 15.5dBi 6°T
739 660
Frequency range
90° 170°
806–960 806 – 880 MHz
880 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 15 dBi
2 x 15.5 dBi
Horizontal: Vertical:
90° 10°
Horizontal: 90° Vertical: 9.5°
Electrical tilt
6°, fixed
Sidelobe suppression for first sidelobe above horizon
≥ 16 dB
Front-to-back ratio, copolar
> 25 dB
Isolation
> 32 dB
< 1.5
9.5°
< 1.3
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
600 Watt (at 50 °C ambient temperature)
Input Connector position Weight Wind load
0
Horizontal Pattern
50 Ω
Impedance VSWR
3
10
3
2 x 7-16 female
dB
Half-power beam width Copolar +45°/ –45°
dB
Type No.
0
Vertical Pattern 6° electr. downtilt
Bottom 14 kg Frontal: 330 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1936 / 262 / 116 mm
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
30
A- Dual Polarization Half-power Beam Width
806 – 960 X 90°
XPol A- 806–960 90° 17dBi
739 650
90° 170°
806–960 806 – 880 MHz
880 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 16.5 dBi
2 x 17 dBi
Half-power beam width Copolar +45°/ –45°
Horizontal: 90° Vertical: 7.5°
Horizontal: Vertical:
Sidelobe suppression for first sidelobe above horizon
≥ 15 dB
Front-to-back ratio, copolar
> 25 dB
Isolation
> 32 dB
Impedance
50 Ω
VSWR
< 1.5
90° 7°
7°
< –150 dBc
Max. power per input
600 Watt (at 50 °C ambient temperature)
3 0
Bottom or top
Vertical Pattern
19 kg
first null-fill below horizon better or equal –25 dB below maximum gain
Weight Wind load
10
2 x 7-16 female
Connector position
0
Horizontal Pattern
Intermodulation IM3 (2 x 43 dBm carrier)
Input
3
dB
Frequency range
dB
Type No.
Frontal: 470 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
2580 / 262 / 116 mm
800/900 –45°
800/900 +45°
7-16
7-16
XPol A- 806–960 90° 17dBi 6°T
739 662
Frequency range
90° 170°
806–960 806 – 880 MHz
880 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 16.5 dBi
2 x 17 dBi
Horizontal: 90° Vertical: 7.5°
Horizontal: Vertical:
Electrical tilt
6°, fixed
Sidelobe suppression for first sidelobe above horizon
≥ 16 dB
Front-to-back ratio, copolar
> 25 dB
Isolation
> 32 dB
< 1.5
7°
< 1.3 < –150 dBc
Max. power per input
600 Watt (at 50 °C ambient temperature)
Connector position Weight Wind load
0
Horizontal Pattern
Intermodulation IM3 (2 x 43 dBm carrier)
Input
3
50 Ω
Impedance VSWR
90° 7°
10
3
2 x 7-16 female
dB
Half-power beam width Copolar +45°/ –45°
dB
Type No.
0
Vertical Pattern 6° electr. downtilt
Bottom 19 kg Frontal: 470 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
2580 / 262 / 116 mm
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
31
A- Dual Polarization Half-power Beam Width Adjust. Electr. Downtilt
824– 960 X 65° 2°– 12°
XPol A- 824–960 65° 15dBi 2°–12°T
739 638
Type No. Frequency range
824–960
Polarization Gain Half-power beam width Copolar +45°/ –45° Electrical tilt Sidelobe suppression for first sidelobe above horizon Front-to-back ratio, copolar Cross polar ratio Maindirection Sector
0° ±60°
Isolation
824 – 880 MHz
880 – 960 MHz
+45°, –45°
+45°, –45°
14.5 dBi
15 dBi
Horizontal: 68° Vertical: 15.5°
Horizontal: 65° Vertical: 14.5°
2°–12°, adjustable
2°–12°, adjustable
2° ... 6° ... 10° ... 12° T 2° ... 6° ... 10° ... 12° T 16 ... 14 ... 11 ... 10 dB 20 ... 20 ... 16 ... 14 dB > 25 dB
> 25 dB
Typically: 25 dB > 10 dB
Typically: 25 dB > 10 dB > 32 dB
Impedance
50 Ω
VSWR
< 1.5
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
400 Watt (at 50 °C ambient temperature)
880 – 960 MHz: +45°/ –45° Polarization
125°
65° 14.5°
800/900 +45°
7-16
7-16
dB
3
dB
10
10 3
800/900 –45°
0 0
Horizontal Pattern
Vertical Pattern 2°– 12° electrical downtilt continously adjustable
Mechanical specifications Input
Adjustment mechanism 130°
68°
Bottom 1x, Position bottom continously adjustable
Weight 15.5°
Wind load
12 kg Frontal: Lateral: Rearside:
230 N (at 150 km/h) 130 N (at 150 km/h) 500 N (at 150 km/h)
10
10
3
dB
dB
Max. wind velocity 3
2 x 7-16 female
Connector position
824 – 880 MHz: +45°/ –45° Polarization
0 0
Horizontal Pattern
200 km/h
Packing size
1422 x 287 x 165 mm
Height/width/depth
1296 / 262 / 116 mm
Vertical Pattern 2°– 12° electrical downtilt continously adjustable
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
32
A- Dual Polarization Half-power Beam Width Adjust. Electr. Downtilt
824 – 960 X 65° 2°– 10°
XPol A- 824–960 65° 16.5dBi 2°–10°T
739 639
Type No. Frequency range
824–960 824 – 880 MHz
880 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 16 dBi
2 x 16.5 dBi
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
Electrical tilt
68° 10°
Horizontal: 65° Vertical: 9.5°
2°–10°, adjustable
Sidelobe suppression for first sidelobe above horizon Front-to-back ratio, copolar Cross polar ratio Maindirection Sector
0° ±60°
Isolation
2°–10°, adjustable
2° ... 5° ... 8° ... 10° T 2° ... 5° ... 8° ... 10° T 20 ... 16 ... 14 ... 13 dB 20 ... 18 ... 16 ... 14 dB > 25 dB
> 25 dB
Typically: 25 dB > 10 dB
Typically: 25 dB > 10 dB > 32 dB
Impedance
50 Ω
VSWR
< 1.5
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
400 Watt (at 50 °C ambient temperature)
880 – 960 MHz: +45°/ –45° Polarization
125°
65° 9.5°
824 – 960 +45°
7-16
7-16
dB
3
dB
10
10 3
824 – 960 –45°
0 0
Horizontal Pattern
Vertical Pattern 2°– 10° electrical downtilt continously adjustable
Mechanical specifications Input
Adjustment mechanism 130°
68°
Bottom 1x, Position bottom continously adjustable
Weight 10°
Wind load
17 kg Frontal: Lateral: Rearside:
330 N (at 150 km/h) 200 N (at 150 km/h) 770 N (at 150 km/h)
10
10
3
dB
dB
Max. wind velocity 3
2 x 7-16 female
Connector position
824 – 880 MHz: +45°/ –45° Polarization
0 0
Horizontal Pattern
200 km/h
Packing size
2122 x 287 x 165 mm
Height/width/depth
1996 / 262 / 116 mm
Vertical Pattern 2°– 10° electrical downtilt continously adjustable
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
33
A- Dual Polarization Half-power Beam Width Adjust. Electr. Downtilt
806 – 960 X 65° 0° – 7°
XPol A- 806–960 65° 17.5dBi 0°–7°T
739 640
Type No. Frequency range
806–960 806 – 880 MHz
880 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 17 dBi
2 x 17.5 dBi
Half-power beam width Copolar +45°/ –45° Electrical tilt Sidelobe suppression for first sidelobe above horizon Front-to-back ratio, copolar Cross polar ratio Maindirection Sector
0° ±60°
Isolation
Horizontal: 68° Vertical: 7.5°
Horizontal: Vertical:
65° 7°
0° – 7°, adjustable
0° – 7°, adjustable
0° ... 2° ... 4° ... 7° T 0° ... 2° ... 4° ... 7° T 17 ... 17 ... 17 ... 17 dB 20 ... 18 ... 18 ... 18 dB > 25 dB
> 25 dB
Typically: 25 dB > 10 dB
Typically: 25 dB > 10 dB > 32 dB
Impedance
50 Ω
VSWR
< 1.5
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
400 Watt (at 50 °C ambient temperature)
880 – 960 MHz: +45°/ –45° Polarization
125°
65° 7°
806 – 960 +45°
7-16
7-16
dB
3
dB
10
10 3
806 – 960 –45°
0 0
Horizontal Pattern
Vertical Pattern 0° – 7° electrical downtilt continously adjustable
Mechanical specifications Input Connector position
806 – 880 MHz: +45°/ –45° Polarization
Adjustment mechanism 130°
68°
Weight 7.5°
Wind load
Bottom 1x, Position bottom continously adjustable 22 kg Frontal: 470 N (at 150 km/h) Lateral: 280 N (at 150 km/h) Rearside: 1040 N (at 150 km/h)
10
10
3
dB
dB
Max. wind velocity 3
2 x 7-16 female
0 0
Horizontal Pattern
200 km/h
Packing size
2692 x 287 x 165 mm
Height/width/depth
2580 / 262 / 116 mm
Vertical Pattern 0° – 7° electrical downtilt continously adjustable
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
34
Summary – Directional Antennas Dual Polarization + 45°/ –45° 1800/1900/2000 Dual Polarization + 45°/ –45° – 1800/1900/2000 Type
Type No.
Frequency range [MHz]
Height [mm]
Connector position
Page
XPol F- 1800
33°
19.5 dBi
2°T
739 927
1710 – 1880
982
bottom
36
XPol F- 1800
33°
22 dBi
2°T
741 623
1710 – 1880
1942
bottom
36
XPol F- 1710–2170
65°
12 dBi
2°T
739 489
1710 – 2170
342
bottom
37
XPol F- 1800 XPol F- 1800 XPol F- 1800
65° 65° 65°
15.5 dBi 15.5 dBi 15 dBi
6°T 12°T
739 490 739 491 741 264
1710 – 1880 1710 – 1880 1710 – 1880
662 662 662
bottom or top bottom bottom
38 38 39
XPol F- 1800 XPol F- 1710–1990 XPol F- 1710–1990
65° 65° 65°
18 dBi 18 dBi 18 dBi
2°T 6°T
739 494 739 495 739 496
1710 – 1880 1710 – 1990 1710 – 1990
1302 1302 1302
bottom or top bottom bottom
39 40 40
XPol F- 1710–2170
65°
18.5 dBi
2°T
741 794
1710 – 2170
1302
bottom
41
XPol F- 1710–1990
65°
19.5 dBi
2°T
739 498
1710 – 1990
1942
bottom
42
XPol F- 1710–1990
90°
8 dBi
739 695
1710 – 1990
174
bottom or top
43
XPol F- 1800 XPol F- 1800
90° 90°
14 dBi 14 dBi
4°T
739 698 741 214
1710 – 1880 1710 – 1880
702 702
bottom or top bottom
44 44
XPol F- 1800 XPol F- 1800
90° 90°
16.5 dBi 16.5 dBi
2°T 6°T
739 707 739 708
1710 – 1880 1710 – 1880
1302 1302
bottom bottom
45 45
XPol F- 1710–2170
85°
17 dBi
2°T
741 987
1710–2170
1302
bottom
46
XPol F- 1800
90°
17.5 dBi
2°T
739 710
1710 – 1880
1902
bottom
47
Versions with connector position “Top” on request New Products
Dual Polarization + 45°/ –45° – 1800/1900/2000 Adjustable Electrical Downtilt XPol F- 1710–2170
65°
18 dBi
0°–8°T
741 784
1710 – 2170
1302
bottom
48
XPol F- 1710–2170
85°
17 dBi
2°–8°T
741 989
1710 – 2170
1302
bottom
49
New Products
35
F- Dual Polarization Half-power Beam Width Fixed Electrical Downtilt
1800 X 33° 2°
XPol F- 1800 33° 19.5dBi 2°T
739 927
Type No. Frequency range
1710 – 1880 MHz
Polarization
+45°, –45°
Gain
2 x 19.5 dBi
33°
+45° Horizontal: Vertical:
–45° Horizontal: Vertical:
33° 9°
33° 9°
3
dB
10
Half-power beam width Copolar
0
Electrical tilt
Horizontal Pattern
above horizon for first sidelobe better or equal 14 dB below maximum gain
Front-to-back ratio, copolar
> 30 dB
Isolation
> 30 dB
Impedance
50 Ω
VSWR
< 1.5
9°
10
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
200 Watt (at 50 °C ambient temperature)
3
Input
0
2 x 7-16 female
Vertical Pattern
Bottom
– 2° electr. downtilt – first null-fill below horizon better or equal –25 dB below maximum gain
Connector position Weight Wind load
dB
Sidelobe suppression
2°, fixed
7 kg Frontal: 260 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
982 / 262 / 59 mm
1800 –45°
1800 +45°
7-16
7-16
XPol F- 1800 33° 22dBi 2°T
741 623
Type No. Frequency range
1710 – 1880 MHz
Polarization
33°
+45°, –45°
Gain
2 x 22 dBi +45° Horizontal: Vertical:
–45° Horizontal: Vertical:
33° 5°
33° 5°
3
dB
10
Half-power beam width Copolar
0
Sidelobe suppression
2°, fixed above horizon for first sidelobe better or equal 14 dB below maximum gain
Front-to-back ratio, copolar
> 30 dB
Isolation
> 30 dB
Impedance VSWR
50 Ω < 1.5
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
200 Watt (at 50 °C ambient temperature)
Input Connector position Weight Wind load
Horizontal Pattern
5° 10
3
2 x 7-16 female
dB
Electrical tilt
0
Vertical Pattern 2° electrical downtilt
Bottom 11 kg Frontal: 540 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1942 / 262 / 59 mm
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
36
Multi-band F- Dual Polarization Half-power Beam Width Fixed Electrical Downtilt
1710 –2170 X 65° 2°
XPol F- 1710–2170 65° 12dBi 2°T
739 489
Type No. Frequency range 1710 – 1880 MHz
1710–2170 1850 – 1990 MHz
1920 – 2170 MHz
Polarization
+45°, –45°
+45°, –45°
+45°, –45°
Gain
2 x 11.5 dBi
2 x 12 dBi
2 x 12 dBi
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
Electrical tilt Gain-reduction in horizon Front-to-back ratio, copolar Cross polar ratio Maindirection Sector
0° ±60°
67° 32°
Horizontal: Vertical:
65° 30°
Horizontal: Vertical:
63° 28°
5°, fixed
4°, fixed
2°, fixed
typ. 0.3 dB
typ. 0.2 dB
typ. 0.1 dB
> 30 dB
> 30 dB
> 30 dB
Typically: 20 dB > 10 dB
Typically: 20 dB > 10 dB
Typically: 20 dB > 10 dB
Isolation, between ports
> 30 dB
Impedance
50 Ω
VSWR
< 1.4
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
150 Watt (at 50 °C ambient temperature)
1710 – 1880 MHz: +45°/ –45° Polarization 125°
67°
32° 10
3
dB
3
dB
10
0 0
Horizontal Pattern
Vertical Pattern 5° electr. downtilt
1850 – 1990 MHz: +45°/ –45° Polarization 120°
65°
1710 – 2170 –45°
1710 – 2170 +45°
7-16
7-16
30°
dB
3
3
dB
10
10
Mechanical specifications
0
0
Horizontal Pattern
Vertical Pattern 4° electr. downtilt
Input
2 x 7-16 female
Connector position
1920 – 2170 MHz: +45°/ –45° Polarization
Weight Wind load
115°
63° 28°
Max. wind velocity dB
3 0
Horizontal Pattern
3
dB
10
10
Bottom 2 kg Frontal: Lateral: Rearside:
35 N (at 150 km/h) 25 N (at 150 km/h) 80 N (at 150 km/h) 200 km/h
Packing size
444 x 172 x 92 mm
Height/width/depth
342 / 155 / 69 mm
0
Vertical Pattern 2° electr. downtilt
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
37
F- Dual Polarization Half-power Beam Width
1800 X 65°
XPol F- 1800 65° 15.5dBi
739 490
Type No. Frequency range Polarization
+45°, –45°
Gain
2 x 15.5 dBi
65°
120°
1710 – 1880 MHz
Horizontal: Vertical:
Front-to-back ratio, copolar
> 30 dB
Isolation, between ports
> 30 dB
Impedance
50 Ω
VSWR
< 1.5
65° 13°
3
dB
10
Half-power beam width Copolar +45°/ –45°
0
Horizontal Pattern
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
200 Watt (at 50 °C ambient temperature)
13°
2 x 7-16 female
Connector position
10
Bottom or top 3
Weight
dB
Input
3.5 kg 0
Wind load
Frontal: 150 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
662 / 155 / 49 mm
Vertical Pattern
1800 –45°
1800 +45°
7-16
7-16
XPol F- 1800 65° 15.5dBi 6°T Type No. Frequency range Polarization Gain
739 491 120°
1710 – 1880 MHz
65°
+45°, –45° 2 x 15.5 dBi 65° 14°
6°, fixed
Front-to-back ratio, copolar
> 30 dB
Isolation, between ports
> 30 dB
Impedance
50 Ω
VSWR
< 1.5
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
200 Watt (at 50 °C ambient temperature)
Input
3 0
Horizontal Pattern
14°
10
2 x 7-16 female 3
Connector position
Bottom
Weight
3.5 kg
Wind load
Frontal: 150 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
662 / 155 / 49 mm
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
dB
Electrical tilt
Horizontal: Vertical:
dB
10
Half-power beam width Copolar +45°/ –45°
0
Vertical Pattern 6° electrical downtilt
38
F- Dual Polarization Half-power Beam Width
1800 X 65°
XPol F- 1800 65° 15dBi 12°T
741 264
Type No. Frequency range Polarization
+45°, –45°
Gain
2 x 15 dBi
65°
120°
1710 – 1880 MHz
Horizontal: Vertical:
Electrical tilt
65° 14°
12°, fixed
Front-to-back ratio, copolar
> 30 dB
Isolation, between ports
> 30 dB
3
dB
10
Half-power beam width Copolar +45°/ –45°
0
Horizontal Pattern
50 Ω
Impedance
< 1.4
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
200 Watt (at 50 °C ambient temperature)
Input
14°
10
2 x 7-16 female 3
Connector position
Bottom
Weight
3.5 kg
Wind load
dB
VSWR
0
Frontal: 150 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
662 / 155 / 49 mm
Vertical Pattern 12° electrical downtilt
1800 –45°
1800 +45°
7-16
7-16
XPol F- 1800 65° 18dBi Type No. Frequency range Polarization Gain
739 494 120°
1710 – 1880 MHz
65°
+45°, –45° 2 x 18 dBi
Front-to-back ratio, copolar Isolation, between ports Impedance VSWR
Horizontal: Vertical:
65° 6.5°
> 30 dB > 30 dB
3
dB
10
Half-power beam width Copolar +45°/ –45°
0
Horizontal Pattern
50 Ω < 1.5
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
200 Watt (at 50 °C ambient temperature)
6.5°
Connector position*
2 x 7-16 female
10
Bottom or top 3
Weight
dB
Input
6 kg 0
Wind load
Frontal: 310 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1302 / 155 / 49 mm
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
Vertical Pattern
39
F- Dual Polarization Half-power Beam Width
1710–1990 X 65°
XPol F- 1710–1990 65° 18dBi 2°T Type No. Frequency range
739 495
Polarization
+45°, –45°
Gain
2 x 18 dBi
65°
120°
1710 – 1990 MHz
Horizontal: Vertical:
Electrical tilt
2°, fixed
Sidelobe suppression for first sidelobe above horizon
≥ 14 dB
Front-to-back ratio, copolar
> 30 dB
Isolation, between ports
> 30 dB
0
Horizontal Pattern
Max. power per input
200 Watt (at 50 °C ambient temperature)
10
3
dB
< –150 dBc 0
2 x 7-16 female
Vertical Pattern
Bottom
– 2° electrical downtilt – first null-fill below horizon better or equal –25 dB below maximum gain
Connector position Weight Wind load
7°
< 1.4 (1710 – 1880 MHz) < 1.5 (1880 – 1990 MHz)
Intermodulation IM3 (2 x 43 dBm carrier)
Input
3
50 Ω
Impedance VSWR
65° 7°
dB
10
Half-power beam width Copolar +45°/ –45°
6 kg Frontal: 310 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1302 / 155 / 49 mm
1710–1990 –45°
1710–1990 +45°
7-16
7-16
XPol F- 1710–1990 65° 18dBi 6°T Type No. Frequency range Polarization Gain
739 496 120°
1710 – 1990 MHz
65°
+45°, –45° 2 x 18 dBi Horizontal: Vertical:
Electrical tilt
6°, fixed
Sidelobe suppression for first sidelobe above horizon
≥ 14 dB
Front-to-back ratio, copolar
> 30 dB
Isolation, between ports
> 30 dB
VSWR
50 Ω
< –150 dBc
Max. power per input
200 Watt (at 50 °C ambient temperature)
Connector position Weight Wind load
0
Horizontal Pattern
7°
< 1.4 (1710 – 1880 MHz) < 1.5 (1880 – 1990 MHz)
Intermodulation IM3 (2 x 43 dBm carrier)
Input
3
10
3
dB
Impedance
65° 7°
dB
10
Half-power beam width Copolar +45°/ –45°
0
2 x 7-16 female
Vertical Pattern
Bottom
– 6° electrical downtilt – first null-fill below horizon better or equal –25 dB below maximum gain
6 kg Frontal: 310 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1302 / 155 / 49 mm
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
40
Multi-band F- Dual Polarization Half-power Beam Width Fixed Electrical Downtilt
1710 –2170 X 65° 2°
XPol F- 1710–2170 65° 18.5dBi 2°T
741 794
Type No. Frequency range 1710 – 1880 MHz
1710–2170 1850 – 1990 MHz
Polarization
+45°, –45°
+45°, –45°
+45°, –45°
Gain
2 x 17.5 dBi
2 x 18 dBi
2 x 18.5 dBi
Horizontal: 65° Vertical: 6.7°
Horizontal: 63° Vertical: 6.5°
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
67° 7°
1920 – 2170 MHz
Electrical tilt
2°, fixed
2°, fixed
2°, fixed
Sidelobe suppression for first sidelobe above horizon
> 14 dB
> 14 dB
> 14 dB
Front-to-back ratio, copolar
> 30 dB
> 30 dB
> 30 dB
Typically: 30 dB > 10 dB
Typically: 30 dB > 10 dB
Typically: 30 dB > 10 dB
Cross polar ratio Maindirection Sector
0° ±60°
Isolation, between ports
> 30 dB 50 Ω
Impedance VSWR
< 1.4
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
300 Watt (at 50 °C ambient temperature)
1710 – 1880 MHz: +45°/ –45° Polarization 125°
67° 7°
dB
3
3
dB
10
10
0 0
Horizontal Pattern
Vertical Pattern 2° electr. downtilt
1850 – 1990 MHz: +45°/ –45° Polarization 120°
1710 – 2170 –45°
1710 – 2170 +45°
7-16
7-16
65° 6.7°
dB
3
3
dB
10
10
Mechanical specifications
0
0
Horizontal Pattern
Vertical Pattern 2° electr. downtilt
Input
2 x 7-16 female
Connector position
1920 – 2170 MHz: +45°/ –45° Polarization
Weight Wind load
115°
63° 6.5°
Max. wind velocity dB
3 0
Horizontal Pattern
3
dB
10
10
Bottom 6.6 kg Frontal: Lateral: Rearside:
130 N (at 150 km/h) 110 N (at 150 km/h) 310 N (at 150 km/h) 200 km/h
Packing size
1404 x 172 x 92 mm
Height/width/depth
1302 / 155 / 69 mm
0
Vertical Pattern 2° electr. downtilt
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
41
F- Dual Polarization Half-power Beam Width Fixed Electrical Downtilt
1710–1990 X 65° 2°
XPol F- 1710–1990 65° 19.5dBi 2°T
Frequency range Polarization Gain Half-power beam width Copolar +45°/ –45°
739 498 65°
120°
1710 – 1990 MHz +45°, –45° 2 x 19.5 dBi (1880 – 1990 MHz) 2 x 19 dBi (1710 – 1880 MHz) Horizontal: Vertical:
65° 5°
10
3
dB
Type No.
0
2°, fixed
Sidelobe suppression for first sidelobe above horizon
≥ 14 dB
Front-to-back ratio, copolar
> 30 dB
Isolation, between ports
> 30 dB
Impedance
50 Ω
VSWR
< 1.5
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
200 Watt (at 50 °C ambient temperature)
Input
5° 10
3
2 x 7-16 female
Connector position
Bottom
Weight
8.5 kg
Wind load
Horizontal Pattern
dB
Electrical tilt
0
Vertical Pattern 2° electrical downtilt
Frontal: 480 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1942 / 155 / 49 mm
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
1710–1990 –45°
1710–1990 +45°
7-16
7-16
42
F- Dual Polarization Half-power Beam Width
1710 –1990 X 90°
XPol F- 1710–1990 90° 8dBi
Polarization Gain Half-power beam width Copolar +45°/ –45°
1710 – 1990 MHz +45°, –45° 2 x 8 dBi Horizontal: Vertical:
Front-to-back ratio, copolar
> 20 dB
Isolation, between ports
> 30 dB
Impedance
50 Ω
VSWR
< 1.4
90° 55°
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
200 Watt (at 50 °C ambient temperature)
Input Connector position*
90° 170°
2 x 7-16 female
3 0
Horizontal Pattern
55°
10
Bottom or top 3
Weight
dB
Frequency range
739 695
dB
Type No.
3 kg 0
Wind load
Frontal: 20 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
174 / 155 / 69 mm
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
Vertical Pattern
1710–1990 –45°
1710–1990 +45°
7-16
7-16
43
F- Dual Polarization Half-power Beam Width
1800 X 90°
XPol F- 1800 90° 14dBi
739 698
Frequency range
1710 – 1880 MHz
Polarization
+45°, –45°
Gain
2 x 14 dBi
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
Front-to-back ratio, copolar
> 25 dB
Isolation, between ports
> 30 dB
Impedance
50 Ω
VSWR
< 1.4
90° 14°
90° 170°
3
dB
Type No.
0
Horizontal Pattern
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
200 Watt (at 50 °C ambient temperature)
14°
2 x 7-16 female
Connector position*
10
Bottom or top 3
Weight
dB
Input
3.5 kg 0
Wind load
Frontal: 65 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
702 / 155 / 69 mm
Vertical Pattern
1800 –45°
1800 +45°
7-16
7-16
XPol F- 1800 90° 14dBi 4°T
Polarization Gain Half-power beam width Copolar +45°/ –45° Electrical tilt
741 214 1710 – 1880 MHz +45°, –45° 2 x 14 dBi Horizontal: Vertical:
90° 14°
4°, fixed
Front-to-back ratio, copolar
> 25 dB
Isolation, between ports
> 30 dB
Impedance
50 Ω
VSWR
< 1.4
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
200 Watt (at 50 °C ambient temperature)
Input
90° 170°
3 0
Horizontal Pattern
14°
10
2 x 7-16 female 3
Connector position
Bottom
Weight
3.5 kg
dB
Frequency range
dB
Type No.
0
Wind load
Frontal: 65 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
702 / 155 / 69 mm
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
Vertical Pattern 4° electrical downtilt
44
F- Dual Polarization Half-power Beam Width
1800 X 90°
XPol F- 1800 90° 16.5dBi 2°T
739 707
Polarization
+45°, –45°
Gain
2 x 16.5 dBi
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
Electrical tilt
2°, fixed
Sidelobe suppression for first sidelobe above horizon
≥ 14 dB
Front-to-back ratio, copolar
> 27 dB
Isolation, between ports
> 30 dB
Impedance
50 Ω
VSWR
< 1.4
90° 7°
0
7°
< –150 dBc
Max. power per input
200 Watt (at 50 °C ambient temperature)
Input
3
Horizontal Pattern
Intermodulation IM3 (2 x 43 dBm carrier)
10
3 0
2 x 7-16 female
Connector position
Bottom
Weight Wind load
90° 170°
1710 – 1880 MHz
dB
Frequency range
6 kg Frontal: 130 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1302 / 155 / 69 mm
dB
Type No.
Vertical Pattern – 2° electrical downtilt – first null-fill below horizon better or equal –25 dB below maximum gain 1800 –45°
1800 +45°
7-16
7-16
XPol F- 1800 90° 16.5dBi 6°T
Frequency range Polarization Gain Half-power beam width Copolar +45°/ –45°
739 708
90° 170°
1710 – 1880 MHz +45°, –45° 2 x 16.5 dBi Horizontal: Vertical:
Electrical tilt
6°, fixed
Sidelobe suppression for first sidelobe above horizon
≥ 14 dB
Front-to-back ratio, copolar
> 27 dB
Isolation, between ports
> 30 dB
Impedance
50 Ω
VSWR
< 1.4
90° 7°
3
dB
Type No.
0
Horizontal Pattern
7°
< –150 dBc
Max. power per input
200 Watt (at 50 °C ambient temperature)
Input Connector position Weight Wind load
10
3 0
2 x 7-16 female Bottom 6 kg Frontal: 130 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1302 / 155 / 69 mm
dB
Intermodulation IM3 (2 x 43 dBm carrier)
Vertical Pattern – 6° electrical downtilt – first null-fill below horizon better or equal –25 dB below maximum gain
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
45
Multi-band F- Dual Polarization Half-power Beam Width Fixed Electrical Downtilt
1710 –2170 X 85° 2°
XPol F- 1710–2170 85° 17dBi 2°T
741 987
Type No. Frequency range 1710 – 1880 MHz
1710–2170 1850 – 1990 MHz
1920 – 2170 MHz
Polarization
+45°, –45°
+45°, –45°
+45°, –45°
Gain
2 x 16.5 dBi
2 x 16.8 dBi
2 x 17 dBi
Horizontal: 85° Vertical: 6.7°
Horizontal: 85° Vertical: 6.5°
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
90° 7°
Electrical tilt
2°, fixed
2°, fixed
2°, fixed
Sidelobe suppression for first sidelobe above horizon
> 14 dB
> 14 dB
> 14 dB
Front-to-back ratio, copolar
> 25 dB
> 25 dB
> 25 dB
Typically: 20 dB > 10 dB
Typically: 20 dB > 10 dB
Typically: 20 dB > 10 dB
Cross polar ratio Maindirection Sector
0° ±60°
Isolation, between ports
> 30 dB 50 Ω
Impedance VSWR
< 1.4
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
300 Watt (at 50 °C ambient temperature)
1710 – 1880 MHz: +45°/ –45° Polarization 90° 170°
7°
10
3
0
dB
3
dB
10
0
Horizontal Pattern
Vertical Pattern 2° electr. downtilt
1850 – 1990 MHz: +45°/ –45° Polarization 85°
1710 – 2170 –45°
1710 – 2170 +45°
7-16
7-16
170°
6.7°
10
3
0
dB
3
dB
10
Mechanical specifications
0
Horizontal Pattern
Vertical Pattern 2° electr. downtilt
Input
2 x 7-16 female
Connector position
1920 – 2170 MHz: +45°/ –45° Polarization
Weight Wind load
85° 170°
6.5°
Max. wind velocity 10
0
Horizontal Pattern
3
dB
3
dB
10
Bottom 6 kg Frontal: Lateral: Rearside:
130 N (at 150 km/h) 110 N (at 150 km/h) 310 N (at 150 km/h) 200 km/h
Packing size
1404 x 172 x 92 mm
Height/width/depth
1302 / 155 / 69 mm
0
Vertical Pattern 2° electr. downtilt
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
46
F- Dual Polarization Half-power Beam Width Fixed Electrical Downtilt
1800 X 90° 2°
XPol F- 1800 90° 17.5dBi 2°T
Polarization
+45°, –45°
Gain
2 x 17.5 dBi
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
Electrical tilt
2°, fixed
Sidelobe suppression for first sidelobe above horizon
≥ 14 dB
Front-to-back ratio, copolar
> 25 dB
Isolation, between ports
> 30 dB
Impedance
50 Ω
VSWR
< 1.4
90° 5°
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
200 Watt (at 50 °C ambient temperature)
Input Connector position Weight Wind load
90° 170°
1710 – 1880 MHz
3 0
Horizontal Pattern
5° 10
3 0
2 x 7-16 female Bottom 9 kg Frontal: 190 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1902 / 155 / 69 mm
dB
Frequency range
739 710
dB
Type No.
Vertical Pattern – 2° electrical downtilt – first null-fill below horizon better or equal –25 dB below maximum gain
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
1800 –45°
1800 +45°
7-16
7-16
47
Multi-band F- Dual Polarization Half-power Beam Width Adjust. Electrical Downtilt
1710 –2170 X 65° 0°– 8°
XPol F- 1710–2170 65° 18dBi 0°–8°T
741 784
Type No. Frequency range 1710 – 1880 MHz
1710–2170 1850 – 1990 MHz
1920 – 2170 MHz
Polarization
+45°, –45°
+45°, –45°
+45°, –45°
Gain
2 x 17.5 dBi
2 x 17.7 dBi
2 x 18 dBi
Horizontal: 65° Vertical: 6.7°
Horizontal: 63° Vertical: 6.5°
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
67° 7°
Electrical tilt
0°– 8° continously adjustable
0°– 8° continously adjustable
0°– 8° continously adjustable
Sidelobe suppression for first sidelobe above horizon
0° ... 2° ... 5° ... 8°T 16 ... 16 ... 14 .... 14 dB
0° ... 2° ... 5° ... 8°T 18 ... 18 ... 16 ... 14 dB
0° ... 2° ... 5° ... 8°T 18 ... 18 ... 16 ... 14 dB
Front-to-back ratio, copolar
> 30 dB
> 30 dB
> 30 dB
Typically: 25 dB > 10 dB
Typically: 25 dB > 10 dB
Typically: 25 dB > 10 dB
> 30 dB
> 30 dB
> 30 dB
Cross polar ratio Maindirection Sector
0° ±60°
Isolation, between ports Impedance
50 Ω
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< 1.5
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
300 Watt (at 50 °C ambient temperature)
1710 – 1880 MHz: +45°/ –45° Polarization 125°
67°
7°
dB
3
3
dB
10
10
0 0
Horizontal Pattern
Vertical Pattern 0°– 8° electrical downtilt continously adjustable
1850 – 1990 MHz: +45°/ –45° Polarization 120°
1710 – 2170 –45°
1710 – 2170 +45°
7-16
7-16
65° 6.7°
10
3
Mechanical specifications dB
3
dB
10
Input
Horizontal Pattern
Vertical Pattern 0°– 8° electrical downtilt continously adjustable
1920 – 2170 MHz: +45°/ –45° Polarization
Connector position Adjustment mechanism
120°
63° 6.5°
Max. wind velocity dB
0
Horizontal Pattern
3
dB
10
10
Bottom 1x, Position bottom continously adjustable
Weight Wind load
3
2 x 7-16 female
0
0
7 kg Frontal: Lateral: Rearside:
130 N (at 150 km/h) 110 N (at 150 km/h) 310 N (at 150 km/h) 200 km/h
Packing size
1404 x 172 x 92 mm
Height/width/depth
1302 / 155 / 69 mm
0
Vertical Pattern 0°– 8° electrical downtilt continously adjustable
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
48
Multi-band F- Dual Polarization Half-power Beam Width Adjust. Electrical Downtilt
1710 –2170 X 85° 2°– 8°
XPol F- 1710–2170 85° 17dBi 2°–8°T
741 989
Type No. Frequency range 1710 – 1880 MHz
1710–2170 1850 – 1990 MHz
1920 – 2170 MHz
Polarization
+45°, –45°
+45°, –45°
+45°, –45°
Gain
2 x 16.5 dBi
2 x 16.8 dBi
2 x 17 dBi
Horizontal: 85° Vertical: 6.7°
Horizontal: 85° Vertical: 6.5°
2°– 8° continously adjustable
2°– 8° continously adjustable
2°– 8° continously adjustable
Sidelobe suppression for first sidelobe above horizon
> 14 dB
> 14 dB
> 14 dB
Front-to-back ratio, copolar
> 25 dB
> 25 dB
> 25 dB
Typically: 20 dB > 10 dB
Typically: 20 dB > 10 dB
Typically: 20 dB > 10 dB
> 30 dB
> 30 dB
> 30 dB
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
Electrical tilt
Cross polar ratio Maindirection Sector
0° ±60°
Isolation, between ports
90° 7°
Impedance
50 Ω
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< 1.4
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
300 Watt (at 50 °C ambient temperature)
1710 – 1880 MHz: +45°/ –45° Polarization 90° 170°
7° 10
3
0
dB
3
dB
10
0
Horizontal Pattern
Vertical Pattern 2°– 8° electrical downtilt continously adjustable
1850 – 1990 MHz: +45°/ –45° Polarization
1710 – 2170 –45°
1710 – 2170 +45°
7-16
7-16
85° 170°
6.7°
10
Mechanical specifications
3
0
dB
3
dB
10
Input
Horizontal Pattern
Vertical Pattern 2°– 8° electrical downtilt continously adjustable
1920 – 2170 MHz: +45°/ –45° Polarization
Connector position Adjustment mechanism
170°
6.5°
Max. wind velocity 10
0
Horizontal Pattern
3
dB
dB
10
Bottom 1x, Position bottom continously adjustable
Weight Wind load
85°
3
2 x 7-16 female
0
6 kg Frontal: Lateral: Rearside:
130 N (at 150 km/h) 110 N (at 150 km/h) 310 N (at 150 km/h) 200 km/h
Packing size
1404 x 172 x 92 mm
Height/width/depth
1302 / 155 / 69 mm
0
Vertical Pattern 2°– 8° electrical downtilt continously adjustable
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
49
50
Summary – Directional Antennas Dual-band 900/1800/2000 Dual-band 900/1800 – Dual Polarization + 45°/ –45° Type
Type No.
Frequency range [MHz]
Height [mm]
Page
XXPol A- 900/1800 XXPol A- 900/1800
C
65°/65° 12.5/13 dBi 65°/65° 12.5/13.5 dBi
741 316 741 325
870 – 960 / 1710 – 1880 870 – 960 / 1710 – 1880
656 656
52 53
XXPol A- 900/1800 XXPol A- 900/1800
C
65°/60° 65°/60°
15/16.5 dBi 15/17 dBi
741 320 741 326
870 – 960 / 1710 – 1880 870 – 960 / 1710 – 1880
1296 1296
54 55
XXPol A- 900/1800 XXPol A- 900/1800
C
65°/60° 65°/60°
17/18 dBi 17/18.5 dBi
741 322 741 327
870 – 960 / 1710 – 1880 870 – 960 / 1710 – 1880
1936 1936
56 57
XXPol A- 900/1800 XXPol A- 900/1800
C
65°/60° 65°/60°
18/19 dBi 18/19.5 dBi
741 324 741 328
870 – 960 / 1710 – 1880 870 – 960 / 1710 – 1880
2580 2580
58 59
XXPol A- 900/1800 XXPol A- 900/1800
C
65°/60° 17.5/17.5 dBi 65°/60° 17.5/18 dBi
741 336 741 344
870 – 960 / 1710 – 1880 870 – 960 / 1710 – 1880
2580 2580
60 61
6°T 6°T
Connector position: Bottom
Dual-band 900/1800 – Dual Polarization + 45°/ –45° Adjustable Electrical Downtilt XXPol A- 824–960/1800
C
XXPol A- 824–960/1800
XXPol A-
900/1800
C
65°/60°
14.5/16.5 dBi 0°–10°T/2°T
742 151
824 – 960 / 1710 – 1880
1296
62
65°/60°
14.5/17 dBi 0°–10°T/2°T
742 152
824 – 960 / 1710 – 1880
1296
63
65°/60°
17/18 dBi 2°–8°T/2°T
742 047
870 – 960 / 1710 – 1880
2580
64
Connector position: Bottom
New Products
Dual-band 900/1800/2000 – Vertical Polarization VPol BiDir VPol BiDir
800/2000 800/2000
65° 65°
5dBi 5dBi
738 445 738 446
824 – 960 / 1710 – 2170 824 – 960 / 1710 – 2170
310 310
65 65
VPol F-
800/1800
90°
10dBi
741 880
880 – 960 / 1710 – 1880
502
66
Connector position: Bottom or top
New Products
51
Dual-band A- Dual Polarization Half-power Beam Width Integrated Combiner
900
1800
X
X
65°
65° C
XXPol A- 900/1800 C 65°/ 65° 12.5/13dBi
741 316
Type No. Frequency range
900 870 – 960 MHz
1800 1710 – 1880 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 12.5 dBi
2 x 13 dBi
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
65° 28°
Horizontal: Vertical:
Front-to-back ratio, copolar
> 30 dB
> 30 dB
Isolation, between ports
> 30 dB
> 30 dB
60° 19°
Impedance
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< –150 dBc
< –150 dBc
Intermodulation IM3 (2 x 43 dBm carrier) Max. power per input
250 Watt 150 Watt (at 50 °C ambient temperature)
Integrated combiner
The insertion loss is included in the given antenna gain values.
900 +45°/ –45° Polarization
120°
1800 –45°
900 +45°
900 –45°
65°
1800 +45°
C
C
7-16
7-16
28°
dB
3
3
dB
10
10
0
0
Horizontal Pattern
Mechanical specifications
Vertical Pattern
Input Connector position*
1800 +45°/ –45° Polarization
2 x 7-16 female Bottom or top
Weight Wind load 120°
65° 19°
Frontal: Lateral: Rearside:
110 N (at 150 km/h) 60 N (at 150 km/h) 240 N (at 150 km/h) 200 km/h
Packing size
782 x 287 x 165 mm
Height/width/depth
656 / 262 / 116 mm
dB
0
Horizontal Pattern
3
dB
10
10
3
Max. wind velocity
7 kg
* Inverted mounting: Connector position top: Change drain hole screw.
0
Vertical Pattern
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
52
Dual-band A- Dual Polarization Half-power Beam Width
900
1800
X
X
65°
65°
XXPol A- 900/1800 65°/ 65° 12.5/13.5dBi
741 325
Type No. Frequency range
900 870 – 960 MHz
1800 1710 – 1880 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 12.5 dBi
2 x 13.5 dBi
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
Front-to-back ratio, copolar Isolation, between ports
65° 28°
Horizontal: Vertical:
> 30 dB
65° 19°
> 30 dB
> 30 dB (GSM 900 – GSM 900)1 > 30 dB (GSM 1800 – GSM 1800) > 30 dB (GSM 900 – GSM 1800)
Impedance
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< –150 dBc
< –150 dBc
Intermodulation IM3 (2 x 43 dBm carrier) Max. power per input
250 Watt 150 Watt (at 50 °C ambient temperature)
900 +45°/ –45° Polarization
120°
1800 –45°
900 –45°
900 +45°
1800 +45°
7-16
7-16
7-16
7-16
65° 28°
dB
3
3
dB
10
10
0
0
Horizontal Pattern
Mechanical specifications
Vertical Pattern
Input Connector position*
1800 +45°/ –45° Polarization
4 x 7-16 female Bottom or top
Weight Wind load 120°
65° 19°
Frontal: Lateral: Rearside:
110 N (at 150 km/h) 60 N (at 150 km/h) 240 N (at 150 km/h) 200 km/h
Packing size
782 x 287 x 165 mm
Height/width/depth
656 / 262 / 116 mm
dB
0
Horizontal Pattern
3
dB
10
10
3
Max. wind velocity
7 kg
* Inverted mounting: Connector position top: Change drain hole screw.
0
Vertical Pattern
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
53
Dual-band A- Dual Polarization Half-power Beam Width Integrated Combiner
900
1800
X
X
65°
60° C
XXPol A- 900/1800 C 65°/ 60° 15/16.5dBi
741 320
Type No. Frequency range
900 870 – 960 MHz
1800 1710 – 1880 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 15 dBi
2 x 16.5 dBi
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
65° 14°
Horizontal: Vertical:
Front-to-back ratio, copolar
> 30 dB
> 30 dB
Isolation, between ports
> 30 dB
> 30 dB
60° 8°
Impedance
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< –150 dBc
< –150 dBc
Intermodulation IM3 (2 x 43 dBm carrier) Max. power per input
250 Watt 150 Watt (at 50 °C ambient temperature)
Integrated combiner
The insertion loss is included in the given antenna gain values.
900 +45°/ –45° Polarization
120°
1800 –45°
900 +45°
900 –45°
65°
1800 +45°
C
C
7-16
7-16
14°
dB
3
3
dB
10
10
0
0
Horizontal Pattern
Mechanical specifications
Vertical Pattern
Input Connector position*
1800 +45°/ –45° Polarization
2 x 7-16 female Bottom or top
Weight Wind load 115°
60° 8°
Frontal: Lateral: Rearside:
220 N (at 150 km/h) 140 N (at 150 km/h) 490 N (at 150 km/h) 200 km/h
Packing size
1422 x 287 x 165 mm
Height/width/depth
1296 / 262 / 116 mm
dB
0
Horizontal Pattern
3
dB
10
10
3
Max. wind velocity
13 kg
* Inverted mounting: Connector position top: Change drain hole screw.
0
Vertical Pattern
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
54
Dual-band A- Dual Polarization Half-power Beam Width
900
1800
X
X
65°
60°
XXPol A- 900/1800 65°/ 60° 15/17dBi
741 326
Type No. Frequency range
900 870 – 960 MHz
1800 1710 – 1880 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 15 dBi
2 x 17 dBi
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
Front-to-back ratio, copolar Isolation, between ports
65° 14°
Horizontal: Vertical:
> 30 dB
60° 8°
> 30 dB
> 30 dB (GSM 900 – GSM 900)1 > 30 dB (GSM 1800 – GSM 1800) > 30 dB (GSM 900 – GSM 1800)
Impedance
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< –150 dBc
< –150 dBc
Intermodulation IM3 (2 x 43 dBm carrier) Max. power per input
400 Watt 200 Watt (at 50 °C ambient temperature)
900 +45°/ –45° Polarization
120°
1800 –45°
900 –45°
900 +45°
1800 +45°
7-16
7-16
7-16
7-16
65° 14°
dB
3
3
dB
10
10
0
0
Horizontal Pattern
Mechanical specifications
Vertical Pattern
Input Connector position*
1800 +45°/ –45° Polarization
4 x 7-16 female Bottom or top
Weight Wind load 115°
60° 8°
Frontal: Lateral: Rearside:
220 N (at 150 km/h) 140 N (at 150 km/h) 490 N (at 150 km/h) 200 km/h
Packing size
1422 x 287 x 165 mm
Height/width/depth
1296 / 262 / 116 mm
dB
0
Horizontal Pattern
3
dB
10
10
3
Max. wind velocity
13 kg
* Inverted mounting: Connector position top: Change drain hole screw.
0
Vertical Pattern
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
55
Dual-band A- Dual Polarization Half-power Beam Width Integrated Combiner
900
1800
X
X
65°
60° C
XXPol A- 900/1800 C 65°/ 60° 17/18dBi
741 322
Type No. Frequency range
900 870 – 960 MHz
1800 1710 – 1880 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 17 dBi
2 x 18 dBi
Horizontal: 65° Vertical: 9.5°
Horizontal: 60° Vertical: 5.5°
> 15 dB
> 15 dB
Half-power beam width Copolar +45°/ –45° Sidelobe suppression for first sidelobe above horizon Front-to-back ratio, copolar
> 30 dB
> 30 dB
Isolation, between ports
> 30 dB
> 30 dB
Impedance
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< –150 dBc
< –150 dBc
Intermodulation IM3 (2 x 43 dBm carrier) Max. power per input
250 Watt 150 Watt (at 50 °C ambient temperature)
Integrated combiner
The insertion loss is included in the given antenna gain values.
900 +45°/ –45° Polarization
120°
65° 9.5°
1800 –45°
900 +45°
900 –45°
1800 +45°
C
C
7-16
7-16
10
3
dB
3
dB
10
0
0
Horizontal Pattern
Mechanical specifications
Vertical Pattern
Input Connector position*
1800 +45°/ –45° Polarization
2 x 7-16 female Bottom or top
Weight Wind load 115°
60° 5.5°
Frontal: Lateral: Rearside:
330 N (at 150 km/h) 200 N (at 150 km/h) 770 N (at 150 km/h) 200 km/h
Packing size
2057 x 287 x 165 mm
Height/width/depth
1936 / 262 / 116 mm
dB
0
Horizontal Pattern
3
dB
10
10
3
Max. wind velocity
19 kg
* Inverted mounting: Connector position top: Change drain hole screw.
0
Vertical Pattern
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
56
Dual-band A- Dual Polarization Half-power Beam Width
900
1800
X
X
65°
60°
XXPol A- 900/1800 65°/ 60° 17/18.5dBi
741 327
Type No. Frequency range
900 870 – 960 MHz
1800 1710 – 1880 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 17 dBi
2 x 18.5 dBi
Horizontal: 65° Vertical: 9.5°
Horizontal: 60° Vertical: 5.5°
Half-power beam width Copolar +45°/ –45° Sidelobe suppression for first sidelobe above horizon Front-to-back ratio, copolar Isolation, between ports
> 15 dB > 30 dB
> 30 dB
> 30 dB (GSM 900 – GSM 900)1 > 30 dB (GSM 1800 – GSM 1800) > 30 dB (GSM 900 – GSM 1800)
Impedance
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< –150 dBc
< –150 dBc
Intermodulation IM3 (2 x 43 dBm carrier) Max. power per input
400 Watt 200 Watt (at 50 °C ambient temperature)
900 +45°/ –45° Polarization
120°
65° 9.5°
1800 –45°
900 –45°
900 +45°
1800 +45°
7-16
7-16
7-16
7-16
10
3
dB
3
dB
10
0
0
Horizontal Pattern
Mechanical specifications
Vertical Pattern
Input Connector position*
1800 +45°/ –45° Polarization
4 x 7-16 female Bottom or top
Weight Wind load 115°
60° 5.5°
Frontal: Lateral: Rearside:
330 N (at 150 km/h) 200 N (at 150 km/h) 770 N (at 150 km/h) 200 km/h
Packing size
2057 x 287 x 165 mm
Height/width/depth
1936 / 262 / 116 mm
dB
0
Horizontal Pattern
3
dB
10
10
3
Max. wind velocity
19 kg
* Inverted mounting: Connector position top: Change drain hole screw.
0
Vertical Pattern
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
57
Dual-band A- Dual Polarization Half-power Beam Width Integrated Combiner
900
1800
X
X
65°
60° C
XXPol A- 900/1800 C 65°/ 60° 18/19dBi
741 324
Type No. Frequency range
900 870 – 960 MHz
1800 1710 – 1880 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 18 dBi
2 x 19 dBi
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
65° 7°
Horizontal: Vertical:
Front-to-back ratio, copolar
> 30 dB
> 30 dB
Isolation, between ports
> 30 dB
> 30 dB
60° 4°
Impedance
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< –150 dBc
< –150 dBc
Intermodulation IM3 (2 x 43 dBm carrier) Max. power per input
250 Watt 150 Watt (at 50 °C ambient temperature)
Integrated combiner
The insertion loss is included in the given antenna gain values.
900 +45°/ –45° Polarization
120°
65° 7°
1800 –45°
900 –45°
10
C
7-16
7-16
dB
dB
3 0
0
Horizontal Pattern
Mechanical specifications
Vertical Pattern
Input Connector position*
1800 +45°/ –45° Polarization
Weight Wind load 115°
60° 4°
Max. wind velocity
2 x 7-16 female Bottom or top 25 kg Frontal: 470 N (at 150 km/h) Lateral: 280 N (at 150 km/h) Rearside: 1040 N (at 150 km/h) 200 km/h
Packing size
2692 x 287 x 165 mm
Height/width/depth
2580 / 262 / 116 mm
dB
0
Horizontal Pattern
3
dB
10
10
3
1800 +45°
C
10 3
900 +45°
* Inverted mounting: Connector position top: Change drain hole screw.
0
Vertical Pattern
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
58
Dual-band A- Dual Polarization Half-power Beam Width
900
1800
X
X
65°
60°
XXPol A- 900/1800 65°/ 60° 18/19.5dBi
741 328
Type No. Frequency range
900 870 – 960 MHz
1800 1710 – 1880 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 18 dBi
2 x 19.5 dBi
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
Front-to-back ratio, copolar Isolation, between ports
65° 7°
Horizontal: Vertical:
> 30 dB
60° 4°
> 30 dB
> 30 dB (GSM 900 – GSM 900)1 > 30 dB (GSM 1800 – GSM 1800) > 30 dB (GSM 900 – GSM 1800)
Impedance
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< –150 dBc
< –150 dBc
Intermodulation IM3 (2 x 43 dBm carrier) Max. power per input
400 Watt 200 Watt (at 50 °C ambient temperature)
900 +45°/ –45° Polarization
120°
65° 7°
1800 –45°
900 –45°
900 +45°
1800 +45°
7-16
7-16
7-16
7-16
10
3
dB
3
dB
10
0
0
Horizontal Pattern
Mechanical specifications
Vertical Pattern
Input Connector position*
1800 +45°/ –45° Polarization
Weight Wind load 115°
60° 4°
Bottom or top 25 kg Frontal: 470 N (at 150 km/h) Lateral: 280 N (at 150 km/h) Rearside: 1040 N (at 150 km/h) 200 km/h
Packing size
2692 x 287 x 165 mm
Height/width/depth
2580 / 262 / 116 mm
dB
0
Horizontal Pattern
3
dB
10
10
3
Max. wind velocity
4 x 7-16 female
* Inverted mounting: Connector position top: Change drain hole screw.
0
Vertical Pattern
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
59
Dual-band A- Dual Polarization Half-power Beam Width Fixed Electrical Downtilt Integrated Combiner
900
1800
X
X
65°
60°
6°
6° C
XXPol A- 900/1800 C 65°/ 60° 17.5/17.5dBi 6°T
741 336
Type No. Frequency range
900 870 – 960 MHz
1800 1710 – 1880 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 17.5 dBi
2 x 17.5 dBi
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
65° 7°
Horizontal: 60° Vertical: 6.5°
Electrical tilt
6°, fixed
6°, fixed
Front-to-back ratio, copolar
> 30 dB
> 30 dB
Isolation, between ports
> 30 dB
> 30 dB
50 Ω
50 Ω
Impedance VSWR Intermodulation IM3 (2 x 43 dBm carrier)
< 1.5
< 1.5
< –150 dBc
< –150 dBc
Max. power per input
250 Watt 150 Watt (at 50 °C ambient temperature)
Integrated combiner
The insertion loss is included in the given antenna gain values.
900 +45°/ –45° Polarization
120°
65° 7°
900 –45°
10
3
900 +45°
1800 +45°
C
C
7-16
7-16
dB
dB
10
3
1800 –45°
0
0
Horizontal Pattern
Vertical Pattern 6° electr. downtilt Mechanical specifications
1800 +45°/ –45° Polarization
Input Connector position
115°
Weight
60°
Wind load 6.5°
0
Horizontal Pattern
3
dB
dB
3
Max. wind velocity
10
10
2 x 7-16 female Bottom 25 kg Frontal: 470 N (at 150 km/h) Lateral: 280 N (at 150 km/h) Rearside: 1040 N (at 150 km/h) 200 km/h
Packing size
2692 x 287 x 165 mm
Height/width/depth
2580 / 262 / 116 mm
0
Vertical Pattern 6° electr. downtilt
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
60
Dual-band A- Dual Polarization Half-power Beam Width Fixed Electrical Downtilt
900
1800
X
X
65°
60°
6°
6°
XXPol A- 900/1800 65°/ 60° 17.5/18dBi 6°T
741 344
Type No. Frequency range
900 870 – 960 MHz
1800 1710 – 1880 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 17.5 dBi
2 x 18 dBi
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
65° 7°
Horizontal: 60° Vertical: 6.5°
Electrical tilt
6°, fixed
6°, fixed
Front-to-back ratio, copolar
> 30 dB
> 30 dB
Isolation, between ports
> 30 dB (GSM 900 – GSM 900)1 > 30 dB (GSM 1800 – GSM 1800) > 30 dB (GSM 900 – GSM 1800) 50 Ω
Impedance VSWR Intermodulation IM3 (2 x 43 dBm carrier) Max. power per input
50 Ω
< 1.5
< 1.5
< –150 dBc
< –150 dBc
400 Watt 200 Watt (at 50 °C ambient temperature)
900 +45°/ –45° Polarization
120°
65° 7°
900 –45°
900 +45°
1800 +45°
7-16
7-16
7-16
7-16
dB
3
dB
10
10
3
1800 –45°
0
0
Horizontal Pattern
Vertical Pattern 6° electr. downtilt Mechanical specifications
1800 +45°/ –45° Polarization
Input Connector position
115°
Weight
60°
Wind load 6.5°
0
Horizontal Pattern
3
dB
dB
3
Max. wind velocity
10
10
4 x 7-16 female Bottom or top 25 kg Frontal: 470 N (at 150 km/h) Lateral: 280 N (at 150 km/h) Rearside: 1040 N (at 150 km/h) 200 km/h
Packing size
2692 x 287 x 165 mm
Height/width/depth
2580 / 262 / 116 mm
0
Vertical Pattern 6° electr. downtilt
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
61
Dual-band A- Dual Polarization Half-power Beam Width Adjust. Electr. Downtilt Integrated Combiner
824 – 960
1710 –1880
X
X
65°
60°
0°–10°
2° C
XXPol A- 824–960/1800 C 65°/60° 14.5/16.5dBi 0°–10°T/2°T
742 151
Type No. Frequency range
824–960 824 – 880 MHz 880 – 960 MHz
1710–1880 1710 – 1880 MHz
Polarization
+45°, –45°
+45°, –45°
+45°, –45°
Gain
2 x 14 dBi
2 x 14.5 dBi
2 x 16.5 dBi
Horizontal: 70° Vertical: 16°
Horizontal: 65° Vertical: 15°
Horizontal: 60° Vertical: 8°
0°–10°
0°–10°
2°
Half-power beam width Copolar +45°/ –45° Electrical tilt Sidelobe suppression for first sidelobe above horizon Front-to-back ratio, copolar Cross polar ratio Maindirection Sector
0° ±60°
Isolation, between ports
0° ... 6° ... 10°T 0° ... 6° ... 10°T 16 ... 14 ... 12 dB 18 ... 16 ... 14 dB
14 dB
> 30 dB
> 30 dB
> 30 dB
Typically: 18 dB > 10 dB
Typically: 18 dB > 10 dB
Typically: 18 dB > 10 dB
> 30 dB
> 30 dB
Impedance
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< –150 dBc
< –150 dBc
Intermodulation IM3 (2 x 43 dBm carrier) Max. power per input
250 Watt 150 Watt (at 50 °C ambient temperature)
Integrated combiner
The insertion loss is included in the given antenna gain values.
824 – 960 +45°/ –45° Polarization
120°
65°
1800 –45°
900 +45°
900 –45°
1800 +45°
15°
C
3
7-16
7-16
dB
dB
3
C 10
10
0
0
Horizontal Pattern
Vertical Pattern 0°–10° electrical downtilt continously adjustable
Input
Adjustment mechanism
8°
Max. wind velocity
10
Horizontal Pattern
3
dB
dB
10
0
Bottom 1x, Position bottom continously adjustable
Weight
60°
Wind load
3
2 x 7-16 female
Connector position
1710 –1880 +45°/ –45° Polarization
120°
Mechanical specifications
14 kg Frontal: Lateral: Rearside:
230 N (at 150 km/h) 130 N (at 150 km/h) 500 N (at 150 km/h) 200 km/h
Packing size
1422 x 287 x 165 mm
Height/width/depth
1296 / 262 / 116 mm
0
Vertical Pattern 2° electrical downtilt
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
62
Dual-band A- Dual Polarization Half-power Beam Width Adjust. Electr. Downtilt
824 – 960
1710 –1880
X
X
65°
60°
0°–10°
2°
XXPol A- 824–960/1800 65°/60° 14.5/17dBi 0°–10°T/2°T
742 152
Type No. Frequency range
824–960 824 – 880 MHz 880 – 960 MHz
1710–1880 1710 – 1880 MHz
Polarization
+45°, –45°
+45°, –45°
+45°, –45°
Gain
2 x 14 dBi
2 x 14.5 dBi
2 x 17 dBi
Horizontal: 70° Vertical: 16°
Horizontal: 65° Vertical: 15°
Horizontal: 60° Vertical: 8°
0°–10°
0°–10°
2°
Half-power beam width Copolar +45°/ –45° Electrical tilt Sidelobe suppression for first sidelobe above horizon Front-to-back ratio, copolar Cross polar ratio Maindirection Sector
0° ±60°
Isolation, between ports
0° ... 6° ... 10°T 0° ... 6° ... 10°T 16 ... 14 ... 12 dB 18 ... 16 ... 14 dB
14 dB
> 30 dB
> 30 dB
> 30 dB
Typically: 18 dB > 10 dB
Typically: 18 dB > 10 dB
Typically: 18 dB > 10 dB
> 30 dB
> 30 dB
Impedance
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< –150 dBc
< –150 dBc
Intermodulation IM3 (2 x 43 dBm carrier) Max. power per input
250 Watt 150 Watt (at 50 °C ambient temperature)
824 – 960 +45°/ –45° Polarization
120°
1710 –1880 –45°
824 – 960 –45°
824 – 960 +45°
1710 –1880 +45°
7-16
7-16
7-16
7-16
65° 15°
dB
3
3
dB
10
10
0
0
Horizontal Pattern
Vertical Pattern 0°–10° electrical downtilt continously adjustable
Input
Adjustment mechanism
8°
Max. wind velocity
10
Horizontal Pattern
3
dB
dB
10
0
Bottom 1x, Position bottom continously adjustable
Weight
60°
Wind load
3
4 x 7-16 female
Connector position
1710 –1880 +45°/ –45° Polarization
120°
Mechanical specifications
14 kg Frontal: Lateral: Rearside:
230 N (at 150 km/h) 130 N (at 150 km/h) 500 N (at 150 km/h) 200 km/h
Packing size
1422 x 287 x 165 mm
Height/width/depth
1296 / 262 / 116 mm
0
Vertical Pattern 2° electrical downtilt
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
63
Dual-band A- Dual Polarization Half-power Beam Width Adjust. Electr. Downtilt Integrated Combiner
900
1800
X
X
65°
60°
2°– 8°
2° C
XXPol A- 900/1800 C 65°/ 60° 17/18dBi 2°–8°T/2°T
742 047
Type No. Frequency range
900 870 – 960 MHz
Polarization Gain Half-power beam width Copolar +45°/ –45°
+45°, –45°
+45°, –45°
2 x 17 dBi (–0.5 dB)
2 x 18 dBi (–0.5 dB)
Horizontal: Vertical:
Electrical tilt
1800 1710 – 1880 MHz
65° 7°
Horizontal: Vertical:
2°– 8°, adjustable
2°, fixed
Sidelobe suppression for first sidelobe above horizon
2° ... 4° ... 6° ... 8° T 20 ... 18 ... 17 ... 15 dB
2° T 17 dB
Front-to-back ratio, copolar
> 30 dB
> 30 dB
Isolation, between ports
> 30 dB
> 30 dB
50 Ω
50 Ω
Impedance VSWR Intermodulation IM3 (2 x 43 dBm carrier)
60° 6°
< 1.5
< 1.5
< –150 dBc
< –150 dBc
Max. power per input
250 Watt 150 Watt (at 50 °C ambient temperature)
Integrated combiner
The insertion loss is included in the given antenna gain values.
900 +45°/ –45° Polarization
120°
65° 7°
1800 –45°
900 –45°
900 +45°
1800 +45°
C
C
7-16
7-16
10
3
dB
3
dB
10
0
0
Horizontal Pattern
Mechanical specifications
Vertical Pattern 2°– 8° electrical downtilt continously adjustable
Input Connector position
1800 +45°/ –45° Polarization
Adjustment mechanism Weight
120°
60°
Wind load 6°
0
Horizontal Pattern
3
dB
dB
3
Max. wind velocity
10
10
2 x 7-16 female Bottom 1x, Position bottom continously adjustable 25 kg Frontal: 470 N (at 150 km/h) Lateral: 280 N (at 150 km/h) Rearside: 1040 N (at 150 km/h) 200 km/h
Packing size
2692 x 287 x 165 mm
Height/width/depth
2580 / 262 / 116 mm
0
Vertical Pattern 2° electrical downtilt
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
64
Multi-band Bidirectional Antenna Vertical Polarization Half-power Beam Width
800/2000 V 65°
VPol BiDir 800/2000 65° 5dBi Type No.
738 445
738 446
Input
1 x 7-16 female
1 x N female
Frequency range
824 – 960 MHz, 1710 – 2170 MHz < 1.5 824 – 960 MHz: 5 dBi 1710 – 1880 MHz: 5.5 dBi 1880 – 2170 MHz: 6.5 dBi
Impedance
50 Ω
Polarization
Vertical
Max. power (total)
372 mm
Gain
400 mm
VSWR
200 Watt (at 50 °C ambient temperature)
Weight
0.8 kg
Wind load
Frontal: Lateral: Rearside:
Max. wind velocity
25 N (at 150 km/h) 65 N (at 150 km/h) 35 N (at 150 km/h) 200 km/h
Packing size
422 x 212 x 95 mm
Height/width/depth
310 / 55 / 190 mm
Material:
Radiator: Tin plated copper. Reflector: Weather-proof aluminum. Radome: High impact plastic, colour: Grey. All screws and nuts: Stainless steel.
Mounting:
Wall mounting: No additional mounting kit needed. For pipe mast mounting use clamps listed below (order separately).
Ice protection:
The radiating system is protected by the radome. Due to its very sturdy construction, the antenna remains operational even under icy conditions.
Grounding:
All metal parts of the antenna as well as the inner conductor are DC grounded.
8.5 mm
3
dB
10
0
Typical Horizontal Pattern
65
Dual-band F- Vertical Polarization Half-power Beam Width
900
1800
V
V
90°
90°
VPol F- 900/1800 90° 10dBi
741 880
Type No. Frequency range
900 880 – 960 MHz
1800 1710 – 1880 MHz
Polarization
Vertical
Vertical
Gain
10 dBi
10 dBi
Half-power beam width
Horizontal: Vertical:
Front-to-back ratio
Horizontal: Vertical:
90° 35°
> 18 dB
> 20 dB
50 Ω
50 Ω
< 1.7 (880 – 960 MHz) < 1.5 (890 – 960 MHz)
< 1.5 (1710 – 1880 MHz)
< –140 dBc
< –140 dBc
Impedance VSWR
90° 35°
Intermodulation IM3 (2 x 43 dBm carrier) Max. power per input
200 Watt 200 Watt (at 50 °C ambient temperature)
900 90° 180° 35°
10
3
dB
3
dB
10
0
0
Horizontal Pattern
Vertical Pattern
1800
Mechanical specifications
90°
Input
180°
Connector position* 35°
10
0
Horizontal Pattern
dB
dB
10
3 0
Vertical Pattern
Bottom or top
Weight Wind load
3
1 x 7-16 female
Max. wind velocity
2.3 kg Frontal: Lateral: Rearside:
90 N (at 150 km/h) 40 N (at 150 km/h) 110 N (at 150 km/h) 200 km/h
Packing size
604 x 172 x 72 mm
Height/width/depth
502 / 155 / 49 mm
* Inverted mounting: Connector position top: Change drain hole screw.
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
66
Summary – Directional Antennas UMTS (IMT 2000)
XPol Multi-band 1710 – 2170 MHz Type
XPol F- 1710–2170
65°
12.5dBi
XPol F- 1710 – 2170
65°
18.5dBi
XPol F- 1710– 2170
85°
17 dBi
2°T
2°T
Type No.
Frequency range [MHz]
Height [mm]
Connector position
Page
739 489
1710 – 2170
342
bottom
68
741 794
1710 – 2170
1302
bottom
69
741 987
1710 – 2170
1302
bottom
70
New Products
XPol Multi-band 1710 – 2170 MHz Adjustable Electrical Downtilt XPol F- 1710–2170
65°
18 dBi
0°–8°T
741 784
1710 – 2170
1302
bottom
71
XPol F- 1710–2170
85°
17 dBi
2°–8°T
741 989
1710 – 2170
1302
bottom
72
New Products
Please see further UMTS-antennas in sections “Omni” and “Indoor”
The following antenna concepts are in development: • XPol Single-band UMTS 1900 – 2170 MHz, 30° and 45° • XXPol Dual-band 824 – 960 / 1710 – 2170 MHz • XXPol 2-Multi-band 1710 – 2170 MHz / 1710 – 2170 MHz • XXXPol Triple-band 824 – 960 / 1710 – 1880 / 1920 – 2170 MHz • LogPer 870 – 2170 MHz
For detailed information in electronic format please following E-Mail: [email protected]
67
Multi-band F- Dual Polarization Half-power Beam Width Fixed Electrical Downtilt
1710 –2170 X 65° 2°
XPol F- 1710–2170 65° 12dBi 2°T
739 489
Type No. Frequency range 1710 – 1880 MHz
1710–2170 1850 – 1990 MHz
1920 – 2170 MHz
Polarization
+45°, –45°
+45°, –45°
+45°, –45°
Gain
2 x 11.5 dBi
2 x 12 dBi
2 x 12 dBi
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
Electrical tilt Gain-reduction in horizon Front-to-back ratio, copolar Cross polar ratio Maindirection Sector
0° ±60°
67° 32°
Horizontal: Vertical:
65° 30°
Horizontal: Vertical:
63° 28°
5°, fixed
4°, fixed
2°, fixed
typ. 0.3 dB
typ. 0.2 dB
typ. 0.1 dB
> 30 dB
> 30 dB
> 30 dB
Typically: 20 dB > 10 dB
Typically: 20 dB > 10 dB
Typically: 20 dB > 10 dB
Isolation, between ports
> 30 dB
Impedance
50 Ω
VSWR
< 1.4
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
150 Watt (at 50 °C ambient temperature)
1710 – 1880 MHz: +45°/ –45° Polarization 125°
67°
32° 10
3
dB
3
dB
10
0 0
Horizontal Pattern
Vertical Pattern 5° electr. downtilt
1850 – 1990 MHz: +45°/ –45° Polarization 120°
65°
1710 – 2170 –45°
1710 – 2170 +45°
7-16
7-16
30°
dB
3
3
dB
10
10
Mechanical specifications
0
0
Horizontal Pattern
Vertical Pattern 4° electr. downtilt
Input
2 x 7-16 female
Connector position
1920 – 2170 MHz: +45°/ –45° Polarization
Weight Wind load
115°
63° 28°
Max. wind velocity dB
3 0
Horizontal Pattern
3
dB
10
10
Bottom 2 kg Frontal: Lateral: Rearside:
35 N (at 150 km/h) 25 N (at 150 km/h) 80 N (at 150 km/h) 200 km/h
Packing size
444 x 172 x 92 mm
Height/width/depth
342 / 155 / 69 mm
0
Vertical Pattern 2° electr. downtilt
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
68
Multi-band F- Dual Polarization Half-power Beam Width Fixed Electrical Downtilt
1710 –2170 X 65° 2°
XPol F- 1710–2170 65° 18.5dBi 2°T
741 794
Type No. Frequency range 1710 – 1880 MHz
1710–2170 1850 – 1990 MHz
Polarization
+45°, –45°
+45°, –45°
+45°, –45°
Gain
2 x 17.5 dBi
2 x 18 dBi
2 x 18.5 dBi
Horizontal: 65° Vertical: 6.7°
Horizontal: 63° Vertical: 6.5°
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
67° 7°
1920 – 2170 MHz
Electrical tilt
2°, fixed
2°, fixed
2°, fixed
Sidelobe suppression for first sidelobe above horizon
> 14 dB
> 14 dB
> 14 dB
Front-to-back ratio, copolar
> 30 dB
> 30 dB
> 30 dB
Typically: 30 dB > 10 dB
Typically: 30 dB > 10 dB
Typically: 30 dB > 10 dB
Cross polar ratio Maindirection Sector
0° ±60°
Isolation, between ports
> 30 dB 50 Ω
Impedance VSWR
< 1.4
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
300 Watt (at 50 °C ambient temperature)
1710 – 1880 MHz: +45°/ –45° Polarization 125°
67° 7°
dB
3
3
dB
10
10
0 0
Horizontal Pattern
Vertical Pattern 2° electr. downtilt
1850 – 1990 MHz: +45°/ –45° Polarization 120°
1710 – 2170 –45°
1710 – 2170 +45°
7-16
7-16
65° 6.7°
dB
3
3
dB
10
10
Mechanical specifications
0
0
Horizontal Pattern
Vertical Pattern 2° electr. downtilt
Input
2 x 7-16 female
Connector position
1920 – 2170 MHz: +45°/ –45° Polarization
Weight Wind load
115°
63° 6.5°
Max. wind velocity dB
3 0
Horizontal Pattern
3
dB
10
10
Bottom 6.6 kg Frontal: Lateral: Rearside:
130 N (at 150 km/h) 110 N (at 150 km/h) 310 N (at 150 km/h) 200 km/h
Packing size
1404 x 172 x 92 mm
Height/width/depth
1302 / 155 / 69 mm
0
Vertical Pattern 2° electr. downtilt
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
69
Multi-band F- Dual Polarization Half-power Beam Width Fixed Electrical Downtilt
1710 –2170 X 85° 2°
XPol F- 1710–2170 85° 17dBi 2°T
741 987
Type No. Frequency range 1710 – 1880 MHz
1710–2170 1850 – 1990 MHz
1920 – 2170 MHz
Polarization
+45°, –45°
+45°, –45°
+45°, –45°
Gain
2 x 16.5 dBi
2 x 16.8 dBi
2 x 17 dBi
Horizontal: 85° Vertical: 6.7°
Horizontal: 85° Vertical: 6.5°
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
90° 7°
Electrical tilt
2°, fixed
2°, fixed
2°, fixed
Sidelobe suppression for first sidelobe above horizon
> 14 dB
> 14 dB
> 14 dB
Front-to-back ratio, copolar
> 25 dB
> 25 dB
> 25 dB
Typically: 20 dB > 10 dB
Typically: 20 dB > 10 dB
Typically: 20 dB > 10 dB
Cross polar ratio Maindirection Sector
0° ±60°
Isolation, between ports
> 30 dB 50 Ω
Impedance VSWR
< 1.4
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
300 Watt (at 50 °C ambient temperature)
1710 – 1880 MHz: +45°/ –45° Polarization 90° 170°
7°
10
3
0
dB
3
dB
10
0
Horizontal Pattern
Vertical Pattern 2° electr. downtilt
1850 – 1990 MHz: +45°/ –45° Polarization 85°
1710 – 2170 –45°
1710 – 2170 +45°
7-16
7-16
170°
6.7°
10
3
0
dB
3
dB
10
Mechanical specifications
0
Horizontal Pattern
Vertical Pattern 2° electr. downtilt
Input
2 x 7-16 female
Connector position
1920 – 2170 MHz: +45°/ –45° Polarization
Weight Wind load
85° 170°
6.5°
Max. wind velocity 10
0
Horizontal Pattern
3
dB
3
dB
10
Bottom 6 kg Frontal: Lateral: Rearside:
130 N (at 150 km/h) 110 N (at 150 km/h) 310 N (at 150 km/h) 200 km/h
Packing size
1404 x 172 x 92 mm
Height/width/depth
1302 / 155 / 69 mm
0
Vertical Pattern 2° electr. downtilt
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
70
Multi-band F- Dual Polarization Half-power Beam Width Adjust. Electrical Downtilt
1710 –2170 X 65° 0°– 8°
XPol F- 1710–2170 65° 18dBi 0°–8°T
741 784
Type No. Frequency range 1710 – 1880 MHz
1710–2170 1850 – 1990 MHz
1920 – 2170 MHz
Polarization
+45°, –45°
+45°, –45°
+45°, –45°
Gain
2 x 17.5 dBi
2 x 17.7 dBi
2 x 18 dBi
Horizontal: 65° Vertical: 6.7°
Horizontal: 63° Vertical: 6.5°
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
67° 7°
Electrical tilt
0°– 8° continously adjustable
0°– 8° continously adjustable
0°– 8° continously adjustable
Sidelobe suppression for first sidelobe above horizon
0° ... 2° ... 5° ... 8°T 16 ... 16 ... 14 .... 14 dB
0° ... 2° ... 5° ... 8°T 18 ... 18 ... 16 ... 14 dB
0° ... 2° ... 5° ... 8°T 18 ... 18 ... 16 ... 14 dB
Front-to-back ratio, copolar
> 30 dB
> 30 dB
> 30 dB
Typically: 25 dB > 10 dB
Typically: 25 dB > 10 dB
Typically: 25 dB > 10 dB
> 30 dB
> 30 dB
> 30 dB
Cross polar ratio Maindirection Sector
0° ±60°
Isolation, between ports Impedance
50 Ω
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< 1.5
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
300 Watt (at 50 °C ambient temperature)
1710 – 1880 MHz: +45°/ –45° Polarization 125°
67°
7°
dB
3
3
dB
10
10
0 0
Horizontal Pattern
Vertical Pattern 0°– 8° electrical downtilt continously adjustable
1850 – 1990 MHz: +45°/ –45° Polarization 120°
1710 – 2170 –45°
1710 – 2170 +45°
7-16
7-16
65° 6.7°
10
3
Mechanical specifications dB
3
dB
10
Input
Horizontal Pattern
Vertical Pattern 0°– 8° electrical downtilt continously adjustable
1920 – 2170 MHz: +45°/ –45° Polarization
Connector position Adjustment mechanism
120°
63° 6.5°
Max. wind velocity dB
0
Horizontal Pattern
3
dB
10
10
Bottom 1x, Position bottom continously adjustable
Weight Wind load
3
2 x 7-16 female
0
0
7 kg Frontal: Lateral: Rearside:
130 N (at 150 km/h) 110 N (at 150 km/h) 310 N (at 150 km/h) 200 km/h
Packing size
1404 x 172 x 92 mm
Height/width/depth
1302 / 155 / 69 mm
0
Vertical Pattern 0°– 8° electrical downtilt continously adjustable
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
71
Multi-band F- Dual Polarization Half-power Beam Width Adjust. Electrical Downtilt
1710 –2170 X 85° 2°– 8°
XPol F- 1710–2170 85° 17dBi 2°–8°T
741 989
Type No. Frequency range 1710 – 1880 MHz
1710–2170 1850 – 1990 MHz
1920 – 2170 MHz
Polarization
+45°, –45°
+45°, –45°
+45°, –45°
Gain
2 x 16.5 dBi
2 x 16.8 dBi
2 x 17 dBi
Horizontal: 85° Vertical: 6.7°
Horizontal: 85° Vertical: 6.5°
2°– 8° continously adjustable
2°– 8° continously adjustable
2°– 8° continously adjustable
Sidelobe suppression for first sidelobe above horizon
> 14 dB
> 14 dB
> 14 dB
Front-to-back ratio, copolar
> 25 dB
> 25 dB
> 25 dB
Typically: 20 dB > 10 dB
Typically: 20 dB > 10 dB
Typically: 20 dB > 10 dB
> 30 dB
> 30 dB
> 30 dB
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
Electrical tilt
Cross polar ratio Maindirection Sector
0° ±60°
Isolation, between ports
90° 7°
Impedance
50 Ω
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< 1.4
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
300 Watt (at 50 °C ambient temperature)
1710 – 1880 MHz: +45°/ –45° Polarization 90° 170°
7° 10
3
0
dB
3
dB
10
0
Horizontal Pattern
Vertical Pattern 2°– 8° electrical downtilt continously adjustable
1850 – 1990 MHz: +45°/ –45° Polarization
1710 – 2170 –45°
1710 – 2170 +45°
7-16
7-16
85° 170°
6.7°
10
Mechanical specifications
3
0
dB
3
dB
10
Input
Horizontal Pattern
Vertical Pattern 2°– 8° electrical downtilt continously adjustable
1920 – 2170 MHz: +45°/ –45° Polarization
Connector position Adjustment mechanism
170°
6.5°
Max. wind velocity 10
0
Horizontal Pattern
3
dB
dB
10
Bottom 1x, Position bottom continously adjustable
Weight Wind load
85°
3
2 x 7-16 female
0
6 kg Frontal: Lateral: Rearside:
130 N (at 150 km/h) 110 N (at 150 km/h) 310 N (at 150 km/h) 200 km/h
Packing size
1404 x 172 x 92 mm
Height/width/depth
1302 / 155 / 69 mm
0
Vertical Pattern 2°– 8° electrical downtilt continously adjustable
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
72
Summary – Directional Antennas Vertical Polarization 800/900 Vertical Polarization – 800/900 Type
Type No.
Frequency range [MHz]
Height [mm]
Connector position
Page
VPol
900
20°
16.5 dBi
735 727
870 – 960
500
bottom
76
VPol Par
900
36°
14.5 dBi
728 685
870 – 960
650
bottom
77
VPol Par
900
36°
17.5 dBi
728 684
870 – 960
1290
bottom
78
VPol Par
900
36°
20 dBi
K 73 45 64 7
870 – 960
2250
bottom
79
VPol LogPer
800/900
51°
12 dBi
K 73 22 67
790 – 960
300
bottom
80
VPol LogPer
450/900 68°/60°10.5/11.5 dBi
739 990
440 – 512 824 – 960
1160
bottom
81
VPol VPol
900 900
65° 65°
9 dBi 9 dBi
730 676 730 677
860 – 960 860 – 960
264 264
bottom or top bottom or top
82 82
VPol VPol
900 800/900
65° 65°
12.5 dBi 12.5 dBi
730 360 732 447
870 – 960 806 – 960
654 654
bottom bottom
82 82
VPol VPol VPol VPol
900 800/900 900 900
65° 65° 65° 65°
15.5 15.5 15.5 15
dBi dBi dBi dBi
6°T 12°T
730 732 732 737
368 448 691 735
870 806 870 880
– – – –
960 960 960 960
1294 1294 1294 1294
bottom bottom bottom bottom
83 83 83 84
VPol VPol VPol VPol VPol
900 800/900 900 900 900
65° 65° 65° 65° 65°
17 17 17 17 17
dBi dBi dBi dBi dBi
4.5°T 6°T 9°T
730 691 738 407 735 811 732 690 737 547
870 824 870 870 870
– – – – –
960 960 960 960 960
1934 1934 1934 1934 1934
rearside rearside rearside rearside rearside
84 84 85 85 86
VPol
900
65°
18 dBi
739 854
870 – 960
2254
rearside
86
900 800/900 900 900
65° 65° 65° 65°
730 732 732 737
870 806 870 870
2574 2574 2574 2574
rearside rearside bottom bottom
87 87 88 88
VPol VPol VPol VPol
18.5 18.5 18.5 18.5
dBi dBi dBi dBi
6°T 9°T
376 433 689 548
– – – –
960 960 960 960
73
Summary – Directional Antennas Vertical Polarization 800/900 Vertical Polarization – 800/900 Type
Type No.
Frequency range [MHz]
Height [mm]
Connector position
Page
VPol F- VPol F-
900 900
90° 90°
7.5 dBi 7.5 dBi
736 622 736 854
872 – 960 872 – 960
262 262
bottom or top bottom or top
89 89
VPol F-
900
90°
10 dBi
736 855
872 – 960
502
bottom or top
89
VPol F-
900
90°
12.5 dBi
736 668
872 – 960
982
bottom or top
90
VPol F- VPol VPol
900 900 800/900
90° 90° 90°
14 dBi 14 dBi 14 dBi
736 858 730 370 732 480
872 – 960 870 – 960 806 – 960
1222 1294 1294
bottom or top bottom bottom
90 91 91
VPol VPol VPol VPol VPol
F- F-
900 800/900 900 900 900
90° 90° 90° 90° 90°
15.5 15.5 15.5 15.5 15.5
732 742 736 736 741
870 806 872 872 870
960 960 960 960 960
1934 1934 1942 1942 1934
rearside rearside bottom or top bottom rearside
91 92 93 93 94
VPol F-
900
90°
16.5 dBi
736 866
872 – 960
2422
bottom or top
95
VPol VPol VPol
900 800/900 900
90° 90° 90°
17 dBi 17 dBi 17 dBi
730 378 739 418 737 549
870 – 960 806 – 960 870 – 960
2574 2574 2574
rearside rearside rearside
96 96 97
VPol
900
105°
16.5 dBi
730 380
870 – 960
2574
rearside
98
VPol
900
120°
13 dBi
730 374
870 – 960
1294
bottom
99
VPol
900
120°
14.5 dBi
737 385
870 – 960
1934
rearside
99
VPol
900
120°
15.5 dBi
739 856
870 – 960
2254
rearside
100
VPol VPol
900 800/900
120° 120°
16 dBi 16 dBi
730 382 736 618
870 – 960 806 – 960
2574 2574
rearside rearside
100 100
VPol F-
900
160°
11 dBi
736 900
872 – 960
982
bottom or top
101
VPol F-
900
160°
14 dBi
736 902
872 – 960
1942
bottom or top
101
VPol F-
900
160°
15 dBi
737 849
880 – 960
2422
bottom
102
dBi dBi dBi dBi dBi
5°T 6°T
6°T
2°T
967 150 863 864 067
– – – – –
Additional versions on request
74
Summary – Directional Antennas Vertical Polarization 800/900 Adjustable Electrical Downtilt Type VPol VPol VPol VPol VPol VPol
Type No. F-
900 800/900 900 900 900 900
65° 65° 90° 90° 105° 160°
15 15 13.5 13.5 13 11.5
dBi dBi dBi dBi dBi dBi
3°–15°T 3°–15°T 3°–15°T 4°–14°T 3°–15°T 3°–15°T
6°T
737 741 736 738 736 738
906 493 077 580 078 018
Frequency range [MHz] 870 824 870 880 870 870
– – – – – –
Height [mm]
Connector position
Page
960 960 960 960 960 960
1294 1294 1294 1440 1294 1294
bottom bottom bottom bottom bottom bottom
103 103 104 105 106 107
738 020 738 021
872 – 960 872 – 960
2422 2422
bottom bottom
108 108
738 144
872 – 960
3041
bottom
109
Multi-unit s VPol 2-F- VPol 2-F-
900 900
90° 90°
14 dBi 14 dBi
VPol 3-F-
900
90°
12.5 dBi
Additional versions on request
75
Vertical Polarization Half-power Beam Width
900 V 20°
VPol 900 20° 16.5dBi
735 727
Type No. Input Frequency range VSWR Gain Impedance Polarization Front-to-back-ratio Half-power Beam Width Max. power Weight Wind load
7-16 female 870 – 960 MHz < 1.3 16.5 dBi 50 Ω Vertical > 24 dB H-plane: 20°/ E-plane: 33° 500 Watt (at 50 °C ambient temperature) 10 kg Frontal: 500 N (at 150 km/h) Lateral: 110 N (at 150 km/h) Rearside: 715 N (at 150 km/h) 230 km/h 1062 x 562 x 275 mm 492 / 992 / 190 mm
Max. wind velocity Packing size Height/width/depth Material:
Radiator: Aluminum. Reflector screen: Weather-proof aluminum. Radome: Fiberglass, colour: White. All screws and nuts: Stainless steel.
Ice protection:
Due to the very sturdy antenna construction and the protection of the radiating system by the radome, the antenna remains operational even under icy conditions.
Grounding:
All metal parts of the antenna as well as the inner conductor are DC grounded.
Accessories (order separately) Type No. 14 14 14 14
02 03 04 05
2 2 2 2
clamps clamps clamps clamps
Remarks Mast: 60 – 115 mm diameter Mast: 115 – 210 mm diameter Mast: 210 – 380 mm diameter Mast: 380 – 521 mm diameter
33°
20°
10
3
10
0
Horizontal Pattern
3
dB
61 61 61 61
dB
K K K K
Description
K 61 14 03
0
Vertical Pattern
76
Parabolic Vertical Polarization Half-power Beam Width
900 V 36°
VPol Par 900 36° 14.5dBi
728 685
Type No. Input Frequency range VSWR Gain Impedance Polarization Front-to-back ratio Half-power Beam Width Max. power Weight Wind load
7-16 female 870 – 960 MHz < 1.3 14.5 dBi 50 Ω Vertical > 25 dB H-plane: 36°/ E-plane: 26° 400 Watt (at 50 °C ambient temperature) 14.5 kg Frontal: 275 N (at 150 km/h) Lateral: 200 N (at 150 km/h) Rearside: 275 N (at 150 km/h) 200 km/h 820 x 640 x 465 mm 650 / 591 / 406 mm
Max. wind velocity Packing size Height/width/depth Material:
Radiator: Weather-proof aluminum. Reflector screen: Weather-proof aluminum. Radome: Fiberglass, colour: Grey. All screws and nuts: Stainless steel.
Ice protection:
Due to the very sturdy antenna construction and the protection of the radiating system by the radome, the antenna remains operational even under icy conditions.
Grounding:
All metal parts of the antenna are DC grounded. The inner conductor is coupled capacitively.
760
700
650
429
∅11
Accessories (order separately) ∅13
733 736 K 61 14 03 K 61 14 04 K 61 14 05 733 695
2 2 2 2 1
clamps clamps clamps clamps downtilt kit
Remarks Mast: 50 – 125 mm diameter Mast: 115 – 210 mm diameter Mast: 210 – 380 mm diameter Mast: 380 – 521 mm diameter Downtilt angle: 0° – 33° Use the downtilt kit together with 2 clamps suitable for the mast diameter.
36°
10
140
Description
591
Type No.
406
26°
3 0
Horizontal Pattern
3
dB
dB
10
K 61 14 03
0
Vertical Pattern
77
Parabolic Vertical Polarization Half-power Beam Width
900 V 36°
VPol Par 900 36° 17.5dBi
728 684
Type No. Input Frequency range VSWR Gain Impedance Polarization Front-to-back ratio Half-power Beam Width Max. power Weight Wind load
7-16 female 870 – 960 MHz < 1.3 17.5 dBi 50 Ω Vertical > 30 dB H-plane: 36°/ E-plane: 13° 400 Watt (at 50 °C ambient temperature) 21 kg Frontal: 550 N (at 150 km/h) Lateral: 350 N (at 150 km/h) Rearside: 550 N (at 150 km/h) 200 km/h 1460 x 640 x 465 mm 1290 / 591 / 406 mm
Max. wind velocity Packing size Height/width/depth Material:
Radiator: Weather-proof aluminum. Reflector screen: Weather-proof aluminum. Radome: Fiberglass, colour: Grey. All screws and nuts: Stainless steel.
Ice protection:
Due to the very sturdy antenna construction and the protection of the radiating system by the radome, the antenna remains operational even under icy conditions.
Grounding:
All metal parts of the antenna are DC grounded. The inner conductor is coupled capacitively.
1400
1340
1290
429
Accessories (order separately)
733 736 K 61 14 03 K 61 14 04 K 61 14 05 733 695
2 2 2 2 1
clamps clamps clamps clamps downtilt kit
Remarks Mast: 50 – 125 mm diameter Mast: 115 – 210 mm diameter Mast: 210 – 380 mm diameter Mast: 380 – 521 mm diameter Downtilt angle: 0° – 16° Use the downtilt kit together with 2 clamps suitable for the mast diameter.
∅11
∅13 140
Description
591
Type No.
406
36°
13°
10
3 0
Horizontal Pattern
3
dB
dB
10
0
Vertical Pattern K 61 14 03
78
Parabolic Vertical Polarization Half-power Beam Width
900 V 36°
VPol Par 900 36° 20dBi
K 73 45 64 7
Type No. Input Frequency range VSWR Gain Impedance Polarization Front-to-back ratio Half-power Beam Width Max. power Weight Wind load
7-16 female 870 – 960 MHz < 1.3 20 dBi 50 Ω Vertical > 30 dB H-plane: 36°/ E-plane: 8° 500 Watt (at 50 °C ambient temperature) 30 kg Frontal: 950 N (at 150 km/h) Lateral: 600 N (at 150 km/h) Rearside: 950 N (at 150 km/h) 200 km/h 2420 x 640 x 465 mm 2250 / 591 / 406 mm
Max. wind velocity Packing size Height/width/depth Material:
Radiator: Weather-proof aluminum. Reflector screen: Weather-proof aluminum. Radome: Fiberglass, colour: Grey. All screws and nuts: Stainless steel.
Ice protection:
Due to the very sturdy antenna construction and the protection of the radiating system by the radome, the antenna remains operational even under icy conditions.
Grounding:
All metal parts of the antenna are DC grounded. The inner conductor is coupled capacitively.
2360
2300
2250
429
Accessories (order separately)
733 736 K 61 14 03 K 61 14 04 K 61 14 05 733 695
2 2 2 2 1
clamps clamps clamps clamps downtilt kit
Remarks Mast: 50 – 125 mm diameter Mast: 115 – 210 mm diameter Mast: 210 – 380 mm diameter Mast: 380 – 521 mm diameter Downtilt angle: 0° – 10° Use the downtilt kit together with 2 clamps suitable for the mast diameter.
∅11
∅13 140
Description
591
Type No.
406
36°
8°
10
3 0
Horizontal Pattern
3
dB
dB
10
0
Vertical Pattern K 61 14 03
79
Logarithmic periodic Vertical Polarization Half-power Beam Width
800/900 V 51°
LogPer 800/900 51° 12dBi
K 73 22 67
Type No. Input Frequency range VSWR Gain Impedance Polarization Side-lobe supression Front-to-back ratio Half-power Beam Width Max. power Weight Wind load
7-16 female 790 – 960 MHz < 1.4 12 dBi 50 Ω Vertical > 25 dB > 30 dB H-plane: 51°/ E-plane: 45° 500 Watt (at 50 °C ambient temperature) 6.3 kg Frontal: 20 N (at 150 km/h) Lateral: 260 N (at 150 km/h) Rearside: 30 N (at 150 km/h) 200 km/h 1000 x 360 x 175 mm 300 / 155 / 785 mm
Max. wind velocity Packing size Height/width/depth Material:
Radiator: Weather-proof aluminum. Reflector screen: Weather-proof aluminum. Radome: Fiberglass, colour: Grey. All screws and nuts: Stainless steel.
Mounting:
The antenna can be mounted on tubular mast with a diameter of 30 – 70 mm with supplied clamps.
Ice protection:
Due to the very sturdy antenna construction and the protection of the radiating system by the radome, the antenna remains operational even under icy conditions.
Grounding:
All metal parts of the antenna as well as the inner conductor are DC grounded.
51°
0
Horizontal Pattern
3
dB
3
10
dB
10
45°
0
Vertical Pattern
80
Logarithmic periodic Vertical Polarization Half-power Beam Width
450
900
V
V
68°
60°
LogPer 450/900 68/60° 10.5/11.5dBi
739 990
Type No. Input Frequency range VSWR Gain Impedance Polarization Half-power beam width H-plane E-plane Front-to-back ratio Max. power Weight Wind load Max. wind velocity Packing size Length/width/depth
7-16 female 440 – 512 MHz 824 – 960 MHz < 1.4 10.5 dBi 11.5 dBi 50 Ω Vertical 68° 60° 54° 48° > 23 dB > 25 dB 100 Watt (at 50 °C ambient temperature) 9 kg Frontal: 55 N (at 150 km/h) Lateral: 440 N (at 150 km/h) 180 km/h 1172 x 372 x 225 mm 1160 / 350 / 170 mm
Material:
Radiator: Weather-proof aluminum. Radome: Fiberglass, colour: Grey. All screws and nuts: Stainless steel.
Mounting:
The antenna can be mounted on tubular mast with a diameter of 48 – 115 mm with supplied clamps.
Ice protection:
The radiation system ist protected by the radome. Due its very sturdy construction, the antenna remains operational even under icy conditions.
Grounding:
All metal parts of the antenna including the inner conductor are DC grounded.
440 – 512 MHz
824 – 960 MHz 60°
68°
54°
0
Radiation Pattern in E-plane
0
Radiation Pattern in H-plane
3
10
0
Radiation Pattern in E-plane
3
dB
3
dB
dB
3
10
10
dB
10
48°
0
Radiation Pattern in H-plane
81
Eurocell Vertical Polarization Half-power Beam Width
800/900 V 65°
VPol 900 65° 9dBi Type No.
730 676
Frequency range
730 677
Polarization
65°
120°
860 – 960 MHz Vertical
Gain
9 dBi H-plane: 65° E-plane: 70°
Front-to-back ratio
> 25 dB (890 – 960 MHz) > 20 dB (860 – 890 MHz)
Impedance
50 Ω
VSWR
< 1.3
Intermodulation IM3 (2 x 43 dBm carrier)
Input
< –150 dBc
70°
350 Watt (at 50 °C ambient temperature) 7-16 female
Connector position
N female
10
Bottom or top
Weight Wind load
0
Horizontal Pattern
3
1.2 kg Frontal: 40 N (at 150 km/h)
Max. wind velocity
230 km/h
Height/width/depth
264 / 258 / 103 mm
dB
Max. power
3
dB
10
Half-power beam width
0
Vertical Pattern
VPol 800/900 65° 12.5dBi
730 360
732 447
Frequency range
870 – 960 MHz
806 – 960 MHz
Polarization
Vertical
Vertical
Gain
12.5 dBi
12.5 dBi (870 – 960 MHz) 12 dBi (806 – 870 MHz)
Half-power beam width
H-plane: 65° E-plane: 27°
120°
65°
10
3
dB
Type No.
0
Front-to-back ratio
> 25 dB 50 Ω
Impedance
Intermodulation IM3 (2 x 43 dBm carrier) Max. power Input Connector position Weight Wind load
< 1.3
< 1.5 < –150 dBc 27°
500 Watt (at 50 °C ambient temperature) 7-16 female
10
Bottom 3 kg Frontal: 110 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
654 / 258 / 103 mm
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
3
dB
VSWR
Horizontal Pattern
0
Vertical Pattern
82
Eurocell Vertical Polarization Half-power Beam Width
800/900 V 65°
VPol 800/900 65° 15.5dBi
730 368
732 448
Frequency range
870 – 960 MHz
806 – 960 MHz
Polarization
Vertical
Vertical
Gain
15.5 dBI
15.5 dBi (870 – 960 MHz) 15 dBi (806 – 870 MHz)
Half-power beam width
H-plane: 65° E-plane: 13°
120°
65°
10
3
dB
Type No.
0
Front-to-back ratio
> 25 dB 50 Ω
Impedance < 1.3
Intermodulation IM3 (2 x 43 dBm carrier) Max. power
< –150 dBc 13°
500 Watt (at 50 °C ambient temperature)
Input
7-16 female
Connector position
10
Bottom
Weight Wind load
< 1.5
6 kg Frontal: 220 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1294 / 258 / 103 mm
3
dB
VSWR
Horizontal Pattern
0
Vertical Pattern
VPol 900 65° 15.5dBi 6°T Type No.
732 691
Frequency range
870 – 960 MHz
Polarization Gain
120°
65°
Vertical 15.5 dBi
Front-to-back ratio Impedance VSWR Intermodulation IM3 (2 x 43 dBm carrier) Max. power Input Connector position
6°, fixed > 25 dB
3 0
Horizontal Pattern
50 Ω < 1.3 < –150 dBc 13°
500 Watt (at 50 °C ambient temperature) 7-16 female
10
Bottom 3
Weight Wind load
6 kg Frontal: 220 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1294 / 258 / 103 mm
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
dB
Electrical downtilt
H-plane: 65° E-plane: 13°
dB
10
Half-power beam width
0
Vertical Pattern 6° electr. downtilt
83
Eurocell Vertical Polarization Half-power Beam Width
900 V 65°
VPol 900 65° 15dBi 12°T Type No.
737 735
Frequency range
880 – 960 MHz
Polarization
Vertical
Gain
15 dBi
120°
65°
H-plane: 65° E-plane: 17°
Electrical downtilt
12°, fixed
Front-to-back ratio
Horizontal Pattern
> 25 dB 50 Ω
Impedance VSWR
< 1.3
Intermodulation IM3 (2 x 43 dBm carrier) Max. power
0
> 20 dB (0°... 40° above horizon)
< –150 dBc
17°
500 Watt (at 50 °C ambient temperature)
Input
10
7-16 female 3
Connector position
dB
Sidelobe suppression
3
dB
10
Half-power beam width
Bottom 0
Weight
6 kg
Wind load
Frontal: 220 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1294 / 258 / 103 mm
Vertical Pattern 12° electr. downtilt
VPol 800/900 65° 17dBi Type No.
730 691
738 407
Frequency range
870 – 960 MHz
824 – 960 MHz
Polarization
120°
65°
Vertical
Gain
17 dBi H-plane: 65° E-plane: 8.5°
Front-to-back ratio
Intermodulation IM3 (2 x 43 dBm carrier) Max. power
0
50 Ω
Impedance VSWR
3
> 25 dB
< 1.3
dB
10
Half-power beam width
Horizontal Pattern < 1.5
< –150 dBc 500 Watt (at 50 °C ambient temperature) 8.5°
Connector position Weight
7-16 female Rearside
10
9 kg 3
Wind load
dB
Input
Frontal: 340 N (at 150 km/h) 0
Max. wind velocity
200 km/h
Height/width/depth
1934 / 258 / 103 mm
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
Vertical Pattern
84
Eurocell Vertical Polarization Half-power Beam Width
900 V 65°
VPol 900 65° 17dBi 4.5°T Type No.
735 811
Frequency range
870 – 960 MHz
Polarization
Vertical
Gain
17 dBi
120°
65°
H-plane: 65° E-plane: 8.5°
Electrical downtilt
4.5°, fixed
Front-to-back ratio
> 25 dB
Impedance
50 Ω
VSWR
< 1.3
Intermodulation IM3 (2 x 43 dBm carrier)
0
Horizontal Pattern
< –150 dBc 8.5°
500 Watt (at 50 °C ambient temperature)
Input
7-16 female
Connector position
10
Rearside 3
Weight
dB
Max. power
3
dB
10
Half-power beam width
9 kg 0
Wind load
Frontal: 340 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1934 / 258 / 103 mm
Vertical Pattern 4.5° electr. downtilt
VPol 900 65° 17dBi 6°T Type No.
732 690
Frequency range
870 – 960 MHz
Polarization Gain
120°
65°
Vertical 17 dBi
Electrical downtilt Front-to-back ratio Impedance VSWR Intermodulation IM3 (2 x 43 dBm carrier)
H-plane: 65° E-plane: 8.5° 6°, fixed > 25 dB
3
dB
10
Half-power beam width
0
Horizontal Pattern
50 Ω < 1.3 < –150 dBc 8.5°
Input Connector position
500 Watt (at 50 °C ambient temperature) 7-16 female
10
Rearside 3
Weight
dB
Max. power
9 kg 0
Wind load
Frontal: 340 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1934 / 258 / 103 mm
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
Vertical Pattern 6° electr. downtilt
85
Eurocell Vertical Polarization Half-power Beam Width
900 V 65°
VPol 900 65° 17dBi 9°T Type No.
737 547
Frequency range
870 – 960 MHz
Polarization
Vertical
Gain
17 dBi
120°
65°
H-plane: 65° E-plane: 8.5°
Electrical downtilt
9°, fixed
Front-to-back ratio
> 25 dB
Impedance
50 Ω
VSWR
< 1.3
Max. power Input Connector position
0
Horizontal Pattern
< –150 dBc 9°
500 Watt (at 50 °C ambient temperature) 7-16 female
10
Rearside 3
Weight Wind load
9 kg Frontal: 340 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1934 / 258 / 103 mm
dB
Intermodulation IM3 (2 x 43 dBm carrier)
3
dB
10
Half-power beam width
0
Vertical Pattern 9° electr. downtilt
VPol 900 65° 18dBi Type No.
739 854
Frequency range
870 – 960 MHz
Polarization Gain
120°
65°
Vertical 18 dBi
Front-to-back ratio
H-plane: 65° E-plane: 7.5° > 25 dB
Impedance
50 Ω
VSWR
< 1.3
Intermodulation IM3 (2 x 43 dBm carrier) Max. power
3
dB
10
Half-power beam width
0
Horizontal Pattern
< –150 dBc 400 Watt (at 50 °C ambient temperature) 7.5°
Connector position Weight
7-16 female Rearside
10
10.5 kg 3
Wind load
dB
Input
Frontal: 400 N (at 150 km/h) 0
Max. wind velocity
180 km/h
Height/width/depth
2254 / 258 / 103 mm
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
Vertical Pattern
86
Eurocell Vertical Polarization Half-power Beam Width
900 V 65°
VPol 900 65° 18.5dBi Type No.
730 376
Frequency range
870 – 960 MHz
Polarization
Vertical
Gain
18.5 dBi
120°
65°
H-plane: 65° E-plane: 6.5°
Front-to-back ratio
> 25 dB 50 Ω
Impedance VSWR
0
Horizontal Pattern
< 1.3
Intermodulation IM3 (2 x 43 dBm carrier) Max. power
3
dB
10
Half-power beam width
< –150 dBc 500 Watt (at 50 °C ambient temperature) 6.5°
7-16 female
Connector position
Rearside
Weight
10
12 kg 3
Wind load
dB
Input
Frontal: 460 N (at 150 km/h) 0
Max. wind velocity
200 km/h
Height/width/depth
2574 / 258 / 103 mm
Vertical Pattern
VPol 800/900 65° 18.5dBi Type No.
732 433
Frequency range
806 – 960 MHz
Gain Half-power beam width
65°
Vertical 18.5 dBi (870 – 960 MHz) 18 dBi (806 – 870 MHz) H-plane: 65° E-plane: 6.5°
10
3
dB
Polarization
120°
0
Impedance VSWR Intermodulation IM3 (2 x 43 dBm carrier) Max. power Input Connector position Weight Wind load
> 25 dB
Horizontal Pattern
50 Ω < 1.5 < –150 dBc 6.5°
500 Watt (at 50 °C ambient temperature) 7-16 female
10
Rearside 12 kg Frontal: 460 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
2574 / 258 / 103 mm
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
3
dB
Front-to-back ratio
0
Vertical Pattern
87
Eurocell Vertical Polarization Half-power Beam Width
900 V 65°
VPol 900 65° 18.5dBi 6°T
732 689
Frequency range
870 – 960 MHz
Polarization
Vertical
Gain
18.5 dBi
Half-power beam width
H-plane: 65° E-plane: 6.5°
Electrical downtilt
6°, fixed
Front-to-back ratio
> 25 dB
Impedance
50 Ω
VSWR
< 1.3
Intermodulation IM3 (2 x 43 dBm carrier)
10
3 0
Horizontal Pattern
< –150 dBc 500 Watt (at 50 °C ambient temperature)
Input
7-16 female
Connector position
6.5°
Rearside
Weight Wind load
65°
12 kg Frontal: 460 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
2574 / 258 / 103 mm
10
3
dB
Max. power
120°
dB
Type No.
0
Vertical Pattern 6° electr. downtilt
VPol 900 65° 18.5dBi 9°T Type No.
737 548
Frequency range
870 – 960 MHz
Half-power beam width
Vertical 18.5 dBi H-plane: 65° E-plane: 6.5°
Electrical downtilt
9°, fixed
Front-to-back ratio
> 30 dB
Impedance VSWR Intermodulation IM3 (2 x 43 dBm carrier) Max. power Input Connector position Weight Wind load
50 Ω
10
3
dB
Gain
65°
0
Horizontal Pattern
< 1.3 < –150 dBc 500 Watt (at 50 °C ambient temperature) 7-16 female
6,5°
Rearside 12 kg Frontal: 460 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
2574 / 258 / 103 mm
10
3
dB
Polarization
120°
0
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
Vertical Pattern 9°electr. downtilt
88
F- Vertical Polarization Half-power Beam Width
900 V 90°
VPol F- 900 90° 7.5dBi
Frequency range
736 854 Vertical
Gain
7.5 dBi
Half-power beam width
H-plane: 90° E-plane: 70°
Front-to-back ratio
10 3
> 20 dB
0
50 Ω
Impedance VSWR
Horizontal Pattern
< 1.5
Intermodulation IM3 (2 x 43 dBm carrier) Max. power
180°
872 – 960 MHz
Polarization
90°
dB
736 622
< –150 dBc 70°
350 Watt (at 50 °C ambient temperature)
Input
7-16 female
Connector position
N female
Bottom or top
Weight
10
1.5 kg 3
Wind load
dB
Type No.
Frontal: 45 N (at 150 km/h) 0
Max. wind velocity
200 km/h
Height/width/depth
262 / 155 / 49 mm
Vertical Pattern
VPol F- 900 90° 10dBi
Polarization Gain Half-power beam width Front-to-back ratio
872 – 960 MHz Vertical 10 dBi H-plane: 90° E-plane: 36° > 20 dB
Impedance
50 Ω
VSWR
< 1.4
Intermodulation IM3 (2 x 43 dBm carrier) Max. power Input Connector position Weight Wind load
90° 180°
10 3
dB
Frequency range
736 855
0
Horizontal Pattern
< –150 dBc 400 Watt (at 50 °C ambient temperature)
36°
7-16 female Bottom or top 2.3 kg Frontal: 90 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
502 / 155 / 49 mm
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
10
3
dB
Type No.
0
Vertical Pattern
89
F- Vertical Polarization Half-power Beam Width
900 V 90°
VPol F- 900 90° 12.5dBi
736 668
Frequency range
872 – 960 MHz
Polarization
Vertical
Gain
12.5 dBi
Half-power beam width
H-plane: 90° E-plane: 18°
Front-to-back ratio
> 20 dB 50 Ω
Impedance VSWR
180°
10 3 0
Horizontal Pattern
< 1.3
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc 400 Watt (at 50 °C ambient temperature)
Input
18°
7-16 female
Connector position
Bottom or top
Weight
10
3.8 kg 3
Wind load
Frontal: 180 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
982 / 155 / 49 mm
dB
Max. power
90°
dB
Type No.
0
Vertical Pattern
VPol F- 900 90° 14dBi
Polarization Gain Half-power beam width Front-to-back ratio
872 – 960 MHz Vertical 14 dBi H-plane: 90° E-plane: 14° > 20 dB
Impedance
50 Ω
VSWR
< 1.3
Intermodulation IM3 (2 x 43 dBm carrier) Max. power Input Connector position Weight Wind load
90° 180°
10 3
dB
Frequency range
736 858
0
Horizontal Pattern
< –150 dBc 400 Watt (at 50 °C ambient temperature)
14°
7-16 female Bottom or top 4.6 kg Frontal: 230 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1222 / 155 / 49 mm
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
10
3
dB
Type No.
0
Vertical Pattern
90
Eurocell Vertical Polarization Half-power Beam Width
800/900 V 90°
VPol 800/900 90° 14dBi
730 370
732 480
Frequency range
870 – 960 MHz
806 – 960 MHz
Polarization
Vertical
Vertical
Gain
14 dBi
14 dBi (870 – 960 MHz) 13.5 dBi (806 – 870 MHz)
Half-power beam width
H-plane: 90° E-plane: 13°
90° 180°
10 3
dB
Type No.
0
Front-to-back ratio
> 23 dB 50 Ω
Impedance VSWR
< 1.3
Intermodulation IM3 (2 x 43 dBm carrier)
< 1.4 < –150 dBc 13°
500 Watt (at 50 °C ambient temperature)
Input
7-16 female
Connector position
10
Bottom
Weight
6 kg
Wind load
Frontal: 220 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1294 / 258 / 103 mm
3
dB
Max. power
Horizontal Pattern
0
Vertical Pattern
VPol 900 90° 15.5dBi
Frequency range Polarization Gain Half-power beam width Front-to-back ratio
732 967 870 – 960 MHz Vertical 15.5 dBi H-plane: 90° E-plane: 8.5° > 23 dB
Impedance
50 Ω
VSWR
< 1.3
Intermodulation IM3 (2 x 43 dBm carrier) Max. power
90° 180°
10 3
dB
Type No.
0
Horizontal Pattern
< –150 dBc 500 Watt (at 50 °C ambient temperature) 8.5°
Connector position Weight
7-16 female Rearside
10
9 kg 3
Wind load
dB
Input
Frontal: 340 N (at 150 km/h) 0
Max. wind velocity
200 km/h
Height/width/depth
1934 / 258 / 103 mm
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
Vertical Pattern
91
Eurocell Vertical Polarization Half-power Beam Width
800/900 V 90°
VPol 800/900 90° 15.5dBi Type No.
742 150
Frequency range
806 – 960 MHz
Gain Half-power beam width
180°
Vertical 15.5 dBi (870 – 960 MHz) 15 dBi (806 – 870 MHz) H-plane: 90° E-plane: 8.5°
10 3
dB
Polarization
90°
0
> 23 dB
Impedance
50 Ω
VSWR
< 1.4
Intermodulation IM3 (2 x 43 dBm carrier) Max. power Input Connector position Weight Wind load
Horizontal Pattern
< –150 dBc 8.5°
500 Watt (at 50 °C ambient temperature) 7-16 female
10
Rearside 9 kg Frontal: 340 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1934 / 258 / 103 mm
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
3
dB
Front-to-back ratio
0
Vertical Pattern
92
F- Vertical Polarization Half-power Beam Width
900 V 90°
VPol F- 900 90° 15.5dBi
736 863
Frequency range
872 – 960 MHz
Polarization
Vertical
Gain
15.5 dBi
Half-power beam width
above horizon for first sidelobe better or equal 14 dB below maximum gain
Front-to-back ratio
3 0
Horizontal Pattern
50 Ω
VSWR
< 1.3
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc 400 Watt (at 50 °C ambient temperature)
Input
8.5°
10
7-16 female
Connector position
Bottom or top
Weight Wind load
10
> 20 dB
Impedance
Max. power
180°
6.8 kg Frontal: 380 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1942 / 155 / 49 mm
3
dB
Sidelobe suppression
H-plane: 90° E-plane: 8.5°
90°
dB
Type No.
0
Vertical Pattern first null-fill below horizon better or equal to –25 dB below maximum gain
VPol F- 900 90° 15.5dBi 5°T Type No.
736 864
Frequency range
872 – 960 MHz
Gain Half-power beam width Electrical downtilt Front-to-back ratio Impedance VSWR Intermodulation IM3 (2 x 43 dBm carrier)
Vertical 15.5 dBi H-plane: 90° E-plane: 8.5° 5°, fixed > 20 dB
3
dB
Polarization
90° 180°
0
Horizontal Pattern
50 Ω < 1.3 < –150 dBc 5°
Input
400 Watt (at 50 °C ambient temperature) 7-16 female
Connector position
Bottom
Weight
6.8 kg
10
3
dB
Max. power
0
Wind load
Frontal: 380 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1942 / 155 / 49 mm
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
Vertical Pattern 5° electr. downtilt
93
Eurocell Vertical Polarization Half-power Beam Width Fixed Electrical Downtilt
900 V 90° 6°
VPol 900 90° 15.5dBi 6°T
741 067
Frequency range
870 – 960 MHz
Polarization
Vertical
Gain
15.5 dBi H-plane: 90° E-plane: 9°
Electrical downtilt
6°, fixed
Front-to-back ratio
> 22 dB
Impedance
50 Ω
VSWR
< 1.3
Intermodulation IM3 (2 x 43 dBm carrier) Max. power Input Connector position
3 0
Horizontal Pattern
< –150 dBc 9°
500 Watt (at 50 °C ambient temperature) 7-16 female
10
Rearside 3
Weight Wind load
9 kg Frontal: 340 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1934 / 258 / 103 mm
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
dB
Half-power beam width
90° 180°
dB
Type No.
0
Vertical Pattern 6° electr. downtilt
94
F- Vertical Polarization Half-power Beam Width
900 V 90°
VPol F- 900 90° 16.5dBi
736 866
Frequency range
872 – 960 MHz
Polarization
Vertical
Gain
16.5 dBi
Front-to-back ratio Impedance VSWR Intermodulation IM3 (2 x 43 dBm carrier) Max. power Input Connector position Weight
H-plane: 90° E-plane: 7° > 20 dB 50 Ω
180°
10 3 0
Horizontal Pattern
< 1.4 < –150 dBc 400 Watt (at 50 °C ambient temperature) 7°
7-16 female Bottom or top
10
9 kg 3
Wind load
dB
Half-power beam width
90°
dB
Type No.
Frontal: 490 N (at 150 km/h) 0
Max. wind velocity
180 km/h
Height/width/depth
2422 / 155 / 49 mm
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
Vertical Pattern
95
Eurocell Vertical Polarization Half-power Beam Width
800/900 V 90°
VPol 800/900 90° 17dBi Type No.
730 378
739 418
Frequency range
870 – 960 MHz
806 – 960 MHz Vertical
Gain
17 dBi
Half-power beam width
H-plane: 90° E-plane: 6.5°
Front-to-back ratio
VSWR Intermodulation IM3 (2 x 43 dBm carrier) Max. power
10 3
> 23 dB
0
50 Ω
Impedance < 1.3
180°
dB
Polarization
90°
Horizontal Pattern < 1.5
< –150 dBc 500 Watt (at 50 °C ambient temperature) 6.5°
Connector position Weight
7-16 female Rearside
10
12 kg 3
Wind load
dB
Input
Frontal: 460 N (at 150 km/h) 0
Max. wind velocity
200 km/h
Height/width/depth
2574 / 258 / 103 mm
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
Vertical Pattern
96
Eurocell Vertical Polarization Half-power Beam Width Fixed Electrical Downtilt
900 V 90° 6°
VPol 900 90° 17dBi 6°T
737 549
Frequency range
870 – 960 MHz
Polarization
Vertical
Gain
17 dBi H-plane: 90° E-plane: 6.5°
Electrical downtilt
6°, fixed
Front-to-back ratio
> 23 dB
Impedance
50 Ω
VSWR
< 1.3
Intermodulation IM3 (2 x 43 dBm carrier) Max. power Input Connector position
180°
10 3 0
Horizontal Pattern
< –150 dBc 6.5°
500 Watt (at 50 °C ambient temperature) 7-16 female
10
Rearside 3
Weight
dB
Half-power beam width
90°
dB
Type No.
12 kg 0
Wind load
Frontal: 460 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
2574 / 258 / 103 mm
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
Vertical Pattern 6° electr. downtilt
97
Eurocell Vertical Polarization Half-power Beam Width
900 V 105°
VPol 900 105° 16.5dBi Type No.
730 380
Frequency range
870 – 960 MHz
Polarization
Vertical
Gain
16.5 dBi
Impedance VSWR Intermodulation IM3 (2 x 43 dBm carrier) Max. power Input Connector position Weight Wind load
H-plane: 105° E-plane: 6.5° > 22 dB 50 Ω < 1.3
3
dB
Front-to-back ratio
195°
0
Horizontal Pattern
< –150 dBc 500 Watt (at 50 °C ambient temperature) 7-16 female 6.5°
Rearside 12 kg Frontal: 460 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
2574 / 258 / 103 mm
10
3
dB
Half-power beam width
105°
0
Vertical Pattern
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
98
Eurocell Vertical Polarization Half-power Beam Width
900 V 120°
VPol 900 120° 13dBi Type No.
730 374
Frequency range
870 – 960 MHz
Polarization
Vertical
Gain
13 dBi
120°
215°
H-plane: 120° E-plane: 13°
Front-to-back ratio
> 20 dB 50 Ω
Impedance VSWR
0
Horizontal Pattern
< 1.3
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc 500 Watt (at 50 °C ambient temperature)
Input
13°
7-16 female
Connector position
Bottom
Weight
10
6 kg 3
Wind load
Frontal: 220 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1294 / 258 / 103 mm
dB
Max. power
3
dB
10
Half-power beam width
0
Vertical Pattern
VPol 900 120° 14.5dBi Type No.
737 385
Frequency range
870 – 960 MHz
Polarization Gain
120°
215°
Vertical 14.5 dBi
Front-to-back ratio
H-plane: 120° E-plane: 8.5°
3
> 20 dB
0
Impedance
50 Ω
VSWR
< 1.3
Intermodulation IM3 (2 x 43 dBm carrier) Max. power
dB
10
Half-power beam width
Horizontal Pattern
< –150 dBc 500 Watt (at 50 °C ambient temperature) 8.5°
Connector position Weight
7-16 female Rearside
10
9 kg 3
Wind load
dB
Input
Frontal: 340 N (at 150 km/h) 0
Max. wind velocity
200 km/h
Height/width/depth
1934 / 258 / 103 mm
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
Vertical Pattern
99
Eurocell Vertical Polarization Half-power Beam Width
900 V 120°
VPol 900 120° 15.5dBi Type No.
739 856
Frequency range
870 – 960 MHz
Polarization
Vertical
Gain
15.5 dBi
120°
215°
H-plane: 120° E-plane: 7.5°
Front-to-back ratio
> 20 dB
0
50 Ω
Impedance VSWR
Horizontal Pattern
< 1.3
Intermodulation IM3 (2 x 43 dBm carrier) Max. power
3
dB
10
Half-power beam width
< –150 dBc 400 Watt (at 50 °C ambient temperature) 7.5°
7-16 female
Connector position
Rearside
Weight
10
10.5 kg 3
Wind load
dB
Input
Frontal: 400 N (at 150 km/h) 0
Max. wind velocity
180 km/h
Height/width/depth
2254 / 258 / 103 mm
Vertical Pattern
VPol 800/900 120° 16dBi
730 382
736 618
Frequency range
870 – 960 MHz
806 – 960 MHz
Polarization
Vertical
Vertical
Gain
16 dBi
16 dBi (870 – 960 MHz) 15.5 dBi (806 – 870 MHz)
Front-to-back ratio Impedance VSWR Intermodulation IM3 (2 x 43 dBm carrier) Max. power Input Connector position Weight Wind load
H-plane: 120° E-plane: 6.5° > 20 dB
215°
10
3 0
Horizontal Pattern
50 Ω < 1.3 < –150 dBc 6.5°
500 Watt (at 50 °C ambient temperature) 7-16 female
10
Rearside 12 kg Frontal: 460 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
2574 / 258 / 103 mm
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
3
dB
Half-power beam width
120°
dB
Type No.
0
Vertical Pattern
100
F- Vertical Polarization Half-power Beam Width
900 V 160°
VPol F- 900 160° 11dBi
736 900
Frequency range
872 – 960 MHz
Polarization
Vertical
Gain
11 dBi
Half-power beam width
H-plane: 160° E-plane: 18°
Front-to-back ratio
230°
50 Ω
VSWR
10
3
> 20 dB
Impedance
0
Horizontal Pattern
< 1.4
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc 400 Watt (at 50 °C ambient temperature)
Input
18°
7-16 female
Connector position
Bottom or top
Weight
10
5 kg 3
Wind load
Frontal: 180 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
982 / 155 / 49 mm (224 mm incl. Subreflector)
dB
Max. power
160°
dB
Type No.
0
Vertical Pattern
VPol F- 900 160° 14dBi Type No.
736 902
Frequency range
872 – 960 MHz
Half-power beam width Front-to-back ratio
14 dBi H-plane: 160° E-plane: 18° > 20 dB
Impedance
50 Ω
VSWR
< 1.4
Intermodulation IM3 (2 x 43 dBm carrier) Max. power Input Connector position Weight
230°
10
3 0
Horizontal Pattern
< –150 dBc 400 Watt (at 50 °C ambient temperature)
8.5°
7-16 female Bottom or top
10
7 kg 3
Wind load
dB
Gain
Vertical
dB
Polarization
160°
Frontal: 380 N (at 150 km/h) 0
Max. wind velocity
200 km/h
Height/width/depth
1942 / 155 / 49 mm (224 mm incl. Subreflector)
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
Vertical Pattern
101
F- Vertical Polarization Half-power Beam Width Fixed Electrical Downtilt
900 V 160° 2°
VPol F- 900 160° 15dBi 2°T
737 849
Frequency range
880 – 960 MHz
Polarization
Vertical
Gain
15 dBi H-plane: 160° E-plane: 7°
Electrical downtilt
2°, fixed
Front-to-back ratio
> 20 dB
Impedance
50 Ω
VSWR
< 1.3
Intermodulation IM3 (2 x 43 dBm carrier) Max. power Input Connector position Weight Wind load
230°
10
3 0
Horizontal Pattern
< –150 dBc 400 Watt (at 50 °C ambient temperature) 7-16 female
7°
Bottom 10 kg Frontal: 490 N (at 150 km/h)
Max. wind velocity
180 km/h
Height/width/depth
2422 / 155 / 49 mm (224 mm incl. Subreflector)
10
3
dB
Half-power beam width
160°
dB
Type No.
0
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
Vertical Pattern 2° electr. downtilt
102
Eurocell Vertical Polarization Half-power Beam Width Adjust. Electr. Downtilt
900 V 65° 3°–15°
VPol 900 65° 15dBi 3°–15°T Type No.
737 906
Frequency range
870 – 960 MHz
Polarization
741 493 824 – 960 MHz Vertical
Gain
15 dBi
Half-power beam width
H-plane: 65° E-plane: 14°
Electrical downtilt
3°–15°, adjustable in 1° steps
Side lobe suppression
> 14 dB (0°... 40° above horizon)
Front-to-back ratio
> 25 dB
Impedance
50 Ω
VSWR
< 1.4
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power
500 Watt (at 50 °C ambient temperature)
737 906
120°
741 493
65°
3
0
dB
3
0
Horizontal Pattern
Horizontal Pattern
14°
To set electrical downtilt: – push the lever towards the antenna. – align to the desired setting. – let the lever click into position.
15°
3
0
dB
10
dB
10
3
65°
10
dB
10
120°
0
Vertical Pattern 7° Downtilt
Vertical Pattern 7° Downtilt
Mechanical specifications Input 15° 10
15°
Connector position
10
dB
dB
0
Vertical Pattern 15° Downtilt
3
Bottom
Weight Wind load
3
7-16 female
0
Vertical Pattern 15° Downtilt
Max. wind velocity
7 kg Frontal: Lateral: Rearside:
220 N (at 150 km/h) 140 N (at 150 km/h) 490 N (at 150 km/h) 200 km/h
Packing size
1422 x 302 x 160 mm
Height/width/depth
1294 / 258 / 103 mm
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
103
Eurocell Vertical Polarization Half-power Beam Width Adjust. Electr. Downtilt
900 V 90° 3°–15°
VPol 900 90° 13.5dBi 3°–15°T Type No.
736 077
Frequency range
870 – 960 MHz
Polarization
Vertical
Gain
13.5 dBi
Half-power beam width
H-plane: 90° E-plane: 14°
Electrical downtilt
3°–15°, adjustable in 1° steps
Side lobe suppression
> 14 dB (0°... 40° above horizon)
Front-to-back ratio
> 22 dB
Impedance
50 Ω
VSWR
< 1.4
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power
500 Watt (at 50 °C ambient temperature)
90° 180°
3
dB
10
0
Horizontal Pattern
14°
3
dB
10
0
Vertical Pattern 7° Downtilt
To set electrical downtilt: – push the lever towards the antenna. – align to the desired setting. – let the lever click into position.
Mechanical specifications Input 15°
Connector position
Bottom
Weight
10
dB
Wind load 3
7-16 female
0
Vertical Pattern 15° Downtilt
Max. wind velocity
6 kg Frontal: Lateral: Rearside:
220 N (at 150 km/h) 140 N (at 150 km/h) 490 N (at 150 km/h) 200 km/h
Packing size
1422 x 302 x 160 mm
Height/width/depth
1294 / 258 / 103 mm
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
104
F- Vertical Polarization Half-power Beam Width Adjust. Electr. Downtilt
900 V 90° 4°–14°
VPol F- 900 90° 13dBi 4°–14°T Type No.
738 580
Frequency range
880 – 960 MHz
Polarization
Vertical
Gain
13 dBi
Half-power beam width
H-plane: 90° E-plane: 14°
Electrical tilt
4°–14°, continously adjustable
Front-to-back ratio
> 20 dB 50 Ω
Impedance VSWR
< 1.5
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power
400 Watt (at 50 °C ambient temperature)
90°
3
dB
180°
0
Horizontal Pattern Mechanical specifications Input
7-16 female
Connector position Adjustment mechanism
14°
Bottom 1x, Position bottom continously adjustable
15°
Weight
0
Vertical Pattern 7° electrical downtilt
3
dB
3
Wind load
10
dB
10
0
Vertical Pattern 14° electrical downtilt
Max. wind velocity
4.6 kg Frontal: Lateral: Rearside:
230 N (at 150 km/h) 100 N (at 150 km/h) 290 N (at 150 km/h) 200 km/h
Packing size
1550 x 172 x 72 mm
Height/width/depth
1436 / 155 / 49 mm
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
105
Eurocell Vertical Polarization Half-power Beam Width Adjust. Electr. Downtilt
900 V 105° 3°–15°
VPol 900 105° 13dBi 3°–15°T Type No.
736 078
Frequency range
870 – 960 MHz
Polarization
Vertical
Gain
13 dBi
Half-power beam width
H-plane: 105° E-plane: 14°
Electrical downtilt
3°–15°, adjustable in 1° steps
Side lobe suppression
> 14 dB (0°... 40° above horizon)
Front-to-back ratio
> 22 dB
Impedance
50 Ω
VSWR
< 1.4
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power
500 Watt (at 50 °C ambient temperature)
105°
3
dB
195°
0
Horizontal Pattern
14°
3
dB
10
0
Vertical Pattern 7° Downtilt
To set electrical downtilt: – push the lever towards the antenna. – align to the desired setting. – let the lever click into position.
Mechanical specifications Input 15°
Connector position
Bottom
Weight
10
dB
Wind load 3
7-16 female
0
Vertical Pattern 15° Downtilt
Max. wind velocity
6 kg Frontal: Lateral: Rearside:
220 N (at 150 km/h) 140 N (at 150 km/h) 490 N (at 150 km/h) 200 km/h
Packing size
1422 x 302 x 160 mm
Height/width/depth
1294 / 258 / 103 mm
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
106
Eurocell Vertical Polarization Half-power Beam Width Adjust. Electr. Downtilt
900 V 160° 3°–15°
VPol 900 160° 11.5dBi 3°–15°T Type No.
738 018
Frequency range
870 – 960 MHz
Polarization
Vertical
Gain
11.5 dBi
Half-power beam width
H-plane: 160° E-plane: 14°
Electrical downtilt
3°–15°, adjustable in 1° steps
Side lobe suppression
> 14 dB (0°... 40° above horizon)
Front-to-back ratio
> 25 dB
Impedance
50 Ω
VSWR
< 1.5
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power
500 Watt (at 50 °C ambient temperature)
160°
10
3
dB
230°
0
Horizontal Pattern
14°
3
dB
10
0
Vertical Pattern 7° Downtilt
To set electrical downtilt: – push the lever towards the antenna. – align to the desired setting. – let the lever click into position.
Mechanical specifications Input
7-16 female
Connector position 15°
dB
3
Weight Wind load
10
0
Vertical Pattern 15° Downtilt
Bottom
Max. wind velocity Packing size Height/width/depth
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
6.5 kg Frontal: Lateral: Rearside:
220 N (at 150 km/h) 140 N (at 150 km/h) 490 N (at 150 km/h) 200 km/h
1422 x 302 x 160 mm 1294 / 258 / 103 mm (284 mm incl. subreflector)
107
Multi-unit F- Half-power Beam Width 2 Unit Antennas Antenna
Frequency range VSWR Gain Impedance Polarization Front-to-back ratio Half-power beam width Isolation Max. power per input Weight Wind load
Max. wind velocity Height/width/depth
90°
VPol 2-F- 900 90° 14dBi
VPol 2-F- 900 90° 14dBi 6°T
738 020
738 021
2 x 7-16 female Bottom or top Bottom: Connector T = Top system Connector B = Bottom system Top: Connector T = Bottom system Connector B = Top system 872 – 960 MHz < 1.4 14 dBi bottom system 13.5 dBi top system 50 Ω Vertical > 20 dB H-plane: 90°/ E-plane: 14° > 36 dB 400 Watt (at 50 °C ambient temperature) 9 kg Frontal: 490 N (at 150 km/h) Lateral: 230 N (at 150 km/h) Rearside: 620 N (at 150 km/h) 180 km/h 2422 / 155 / 49 mm
2 x 7-16 female Bottom
Type No. Input Connector position
900
872 – 960 MHz < 1.4 14 dBi bottom system 13.5 dBi top system 50 Ω Vertical > 20 dB H-plane: 90°/ E-plane: 14°, 6°T > 36 dB 400 Watt (at 50 °C ambient temperature) 9 kg Frontal: 490 N (at 150 km/h) Lateral: 230 N (at 150 km/h) Rearside: 620 N (at 150 km/h) 180 km/h 2422 / 155 / 49 mm
90° 180° 14°
14°
10
3
0
0
dB
3
dB
dB
10
3
0
Components for a 6-unit GSM antenna for 3 sectors Using the mast type no. 738 019 and the azimuth adjustment flange type no. 737 649, the 2-unit antennas type no. 738 020 or 738 021 can be combined to form a 6-unit antenna. Data of the 6-unit antenna: Length Diameter Weight Wind load Max. wind velocity Connector position Mounting Material
Isolation Grounding
2800 mm (incl. mast) 220 mm 70 kg 600 N (at 150 km/h) 180 km/h Bottom (6 x 7-16 female) By means of 190 mm diameter standard flange. Mast and flange: Hot dip galvanized steel. Antennas: Completely closed fiberglass radome. Colour: Grey. All screws and nuts: Stainless steel. vertical > 36 dB horizontal > 45 dB All metal parts of the antenna as well as the inner conductors are DC grounded.
88.9 mm
220 mm
Top view ø190
Description
Type no.
Quantity
Example 1:
2-F- 900 90° 14 dBi Mast Azimuth adjustment flange
738 020 738 019 737 649
3 pieces 1 piece 1 piece
Example 2:
2-F- 900 90° 14 dBi 2-F- 900 90° 14dBi 6°T Mast Azimuth adjustment flange
738 738 738 737
1 2 1 1
020 021 019 649
piece pieces piece piece
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
100
The components must be ordered separately:
ø18 ø150
Flange base of the mast 738 019 108
Multi-unit F- Half-power Beam Width 3 Unit Antennas Antenna
900 90°
VPol 3-F- 900 90° 12.5dBi
738 144
Type No. Input Connector position Frequency range VSWR Gain Impedance Polarization Front-to-back ratio Half-power beam width Isolation Max. power per input Weight Wind load
Max. wind velocity Height/width/depth
3 x 7-16 female Bottom 872 – 960 MHz < 1.4 12.5 dBi bottom system 12 dBi middle, top system 50 Ω Vertical > 20 dB H-plane: 90°/ E-plane: 18° > 36 dB 400 Watt (at 50 °C ambient temperature) 11 kg Frontal: 620 N (at 150 km/h) Lateral: 290 N (at 150 km/h) Rearside: 780 N (at 150 km/h) 180 km/h (on mast type no. 738139) 3041 / 155 / 49 mm
90° 180° 18°
3
dB
3
dB
10
0
0
Components for a 9-unit GSM antenna for 3 sectors Using the mast type no. 738 139 and the azimuth adjustment flange type no. 737 649, the 3-unit antennas type no. 738 144 or 738 145 can be combined to form a 9-unit antenna. Data of the 9-unit antenna:
Isolation Grounding
3400 mm (incl. mast) 220 mm 84 kg 750 N (at 150 km/h) 180 km/h Bottom (9 x 7-16 female) By means of 190 mm diameter standard flange. Mast and flange: Hot dip galvanized steel. Antennas: Completely closed fiberglass radome. Colour: Grey. All screws and nuts: Stainless steel. Vertical > 36 dB Horizontal > 45 dB All metal parts of the antenna as well as the inner conductors are DC grounded.
88.9 mm
220 mm
Top view ø190
100
Length Diameter Weight Wind load Max. wind velocity Connector position Mounting Material
The components must be ordered separately: Description
Type No.
Quantity
Example 1:
3-F- 900 90° 12.5 dBi Mast Azimuth adjustment flange
738 144 738 139 737 649
3 pieces 1 piece 1 piece
Example 2:
3-F- 900 90° 12.5 dBi 3-F- 900 90° 12.5 dBi 10°T Mast Azimuth adjustment flange
738 738 738 737
1 2 1 1
144 145 139 649
piece pieces piece piece
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
ø18 ø150 Flange base of the mast 738 139 109
110
Summary – Directional Antennas Vertical Polarization 1800/1900 Vertical Polarization Type
Type No.
Frequency range [MHz]
Height [mm]
Connector position
Page
VPol F-1800/1900
33°
15 dBi
739 129
1710 – 1990
342
bottom or top
112
VPol F-1800/1900
33°
18 dBi
739 131
1710 – 1990
662
bottom or top
112
VPol F-1800/1900
33°
21 dBi
739 134
1710 – 1990
1302
bottom or top
113
VPol F-1800/1900
33°
22.5 dBi
739 136
1710 – 1990
1942
bottom or top
113
VPol F-
1800
65°
10 dBi
734 304
1710 –1900
182
bottom or top
114
VPol F- VPol F- VPol F-
1800 1800 1800
65° 65° 65°
15.5 dBi 17 dBi 16.5 dBi
2°T 8°T
734 310 735 141 736 016
1710 – 1900 1710 – 1900 1710 – 1900
662 982 982
bottom or top bottom bottom
114 115 115
VPol F- VPol F-
1800 1800
65° 65°
18 dBi 18 dBi
2°T
734 314 735 147
1710 – 1900 1710 – 1900
1302 1302
bottom or top bottom
116 116
VPol F- VPol F-
1800 1800
90° 90°
8 dBi 8 dBi
734 318 734 319
1710 – 1900 1710 – 1900
182 182
bottom or top bottom or top
117 117
VPol F-
1800
90°
11 dBi
734 320
1710 – 1900
342
bottom or top
117
VPol F-
1800
90°
16.5 dBi
2°T
734 328
1710 – 1900
1302
bottom
118
VPol F-
1800
90°
17.5 dBi
2°T
734 330
1710 – 1900
1942
bottom
118
VPol F-
1800
105°
16 dBi
2°T
734 342
1710 – 1900
1302
bottom
119
Additional versions on request
111
F- Vertical Polarization Half-power Beam Width
1800 / 1900 V 33°
VPol F- 1800/1900 33° 15dBi
739 129
Type No. Frequency range
1710 – 1990 MHz
Gain
33°
Vertical 15 dBi (1880 – 1990 MHz) 14.5 dBi (1710 – 1880 MHz)
Half-power beam width
H-plane: 33° E-plane: 27°
10
3
dB
Polarization
0
Front-to-back ratio
> 25 dB
Impedance
50 Ω
VSWR
< 1.5
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Input
7-16 female
Connector position
10
Bottom or top
Weight Wind load
27°
200 Watt (at 50 °C ambient temperature)
2.5 kg Frontal: 85 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
342 / 262 / 59 mm
3
dB
Max. power
Horizontal Pattern
0
Vertical Pattern
VPol F- 1800/1900 33° 18dBi
Frequency range Polarization Gain Half-power beam width
739 131 1710 – 1990 MHz 33°
Vertical 18 dBi (1880 – 1990 MHz) 17.5 dBi (1710 – 1880 MHz) H-plane: 33° E-plane: 13°
10
3
dB
Type No.
0
Impedance VSWR Intermodulation IM3 (2 x 43 dBm carrier) Max. power Input Connector position Weight Wind load
> 25 dB
Horizontal Pattern
50 Ω < 1.5 < –150 dBc 13°
200 Watt (at 50 °C ambient temperature) 7-16 female
10
Bottom or top 4 kg Frontal: 170 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
662 / 262 / 59 mm
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
3
dB
Front-to-back ratio
0
Vertical Pattern
112
F- Vertical Polarization Half-power Beam Width
1800 / 1900 V 33°
VPol F- 1800/1900 33° 21dBi
Frequency range
739 134 1710 – 1990 MHz
Polarization Gain
33°
Vertical 21 dBi (1880 – 1990 MHz) 20.5 dBi (1710 – 1880 MHz)
Half-power beam width
H-plane: 33° E-plane: 6.5°
10
3
dB
Type No.
0
Front-to-back ratio
> 25 dB
Impedance
50 Ω
VSWR
< 1.5
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Input
7-16 female
Connector position
10
Bottom or top
Weight Wind load
6.5°
200 Watt (at 50 °C ambient temperature)
7.5 kg Frontal: 350 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1302 / 262 / 59 mm
3
dB
Max. power
Horizontal Pattern
0
Vertical Pattern
VPol F- 1800/1900 33° 22.5dBi
Frequency range Polarization Gain Half-power beam width
739 136 1710 – 1990 MHz 33°
Vertical 22.5 dBi (1880 – 1990 MHz) 22 dBi (1710 – 1880 MHz) H-plane: 33° E-plane: 4.5°
10
3
dB
Type No.
0
Impedance VSWR Intermodulation IM3 (2 x 43 dBm carrier) Max. power Input Connector position Weight Wind load
> 25 dB
Horizontal Pattern
50 Ω < 1.5 < –150 dBc 4.5°
200 Watt (at 50 °C ambient temperature) 7-16 female
10
Bottom or top 11 kg Frontal: 540 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1942 / 262 / 59 mm
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
3
dB
Front-to-back ratio
0
Vertical Pattern
113
F- Vertical Polarization Half-power Beam Width
1800 V 65°
VPol F- 1800 65° 10dBi
734 304
Type No. Frequency range
120°
1710 – 1900 MHz
Polarization
Vertical
Gain
10 dBi
65°
H-plane: 65° E-plane: 55°
Front-to-back ratio
> 25 dB 50 Ω
Impedance VSWR
0
Horizontal Pattern
< 1.3 (1710 – 1880 MHz) < 1.5 (1880 – 1900 MHz)
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
55°
200 Watt (at 50 °C ambient temperature)
Input
7-16 female
Connector position
10
Bottom or top
Weight
1.3 kg
Wind load
Frontal: 30 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
182 / 155 / 36 mm
3
dB
Max. power
3
dB
10
Half-power beam width
0
Vertical Pattern
VPol F- 1800 65° 15.5dBi Type No. Frequency range Polarization Gain
734 310 120°
1710 – 1900 MHz
65°
Vertical 15.5 dBi
Impedance VSWR Intermodulation IM3 (2 x 43 dBm carrier) Max. power Input Connector position Weight Wind load
> 25 dB 50 Ω
3 0
Horizontal Pattern
< 1.3 (1710 – 1880 MHz) < 1.5 (1880 – 1900 MHz) < –150 dBc 14°
200 Watt (at 50 °C ambient temperature) 7-16 female
10
Bottom or top 2.7 kg Frontal: 130 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
662 / 155 / 36 mm
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
3
dB
Front-to-back ratio
H-plane: 65° E-plane: 14°
dB
10
Half-power beam width
0
Vertical Pattern
114
F- Vertical Polarization Half-power Beam Width
1800 V 65°
VPol F- 1800 65° 17dBi 2°T
735 141
Type No. Frequency range
120°
1710 – 1900 MHz
Polarization
Vertical
Gain
17 dBi
65°
H-plane: 65° E-plane: 9°
Electrical downtilt
2°, fixed
Front-to-back ratio
> 25 dB 50 Ω
Impedance VSWR
< 1.3 (1710 – 1880 MHz) < 1.5 (1880 – 1900 MHz)
Intermodulation IM3 (2 x 43 dBm carrier) Max. power
0
Horizontal Pattern
above horizon for first sidelobe better or equal 14 dB below maximum gain
9°
< –150 dBc 10
200 Watt (at 50 °C ambient temperature)
Input
3
7-16 female
dB
Sidelobe suppression
3
dB
10
Half-power beam width
0
Connector position
Bottom
Vertical Pattern
Weight
3.7 kg
– 2° electr. downtilt – first null-fill below horizon better or equal –25 dB below maximum gain
Wind load
Frontal: 190 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
982 / 155 / 36 mm
VPol F- 1800 65° 16.5dBi 8°T Type No. Frequency range Polarization Gain
736 016 120°
1710 – 1900 MHz
65°
Vertical 16.5 dBi
Side lobe suppression Front-to-back ratio Impedance VSWR Intermodulation IM3 (2 x 43 dBm carrier) Max. power Input
3
8°, fixed
0
Horizontal Pattern
above horizon for first sidelobe better or equal 14 dB below maximum gain > 25 dB 50 Ω < 1.3 (1710 – 1880 MHz) < 1.5 (1880 – 1900 MHz)
9°
< –150 dBc
10
200 Watt (at 50 °C ambient temperature)
3
7-16 female
dB
Electrical downtilt
H-plane: 65° E-plane: 9°
dB
10
Half-power beam width
0
Connector position
Bottom
Vertical Pattern
Weight
3.7 kg
– 8° electr. downtilt – first null-fill below horizon better or equal –25 dB below maximum gain
Wind load
Frontal: 190 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
982 / 155 / 36 mm
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
115
F- Vertical Polarization Half-power Beam Width
1800 V 65°
VPol F- 1800 65° 18dBi
734 314
Type No. Frequency range
120°
1710 – 1900 MHz
Polarization
Vertical
Gain
18 dBi
65°
H-plane: 65° E-plane: 6.5°
Front-to-back ratio
> 25 dB
< –150 dBc 6.5°
200 Watt (at 50 °C ambient temperature)
Input
7-16 female
10
Bottom or top
Weight
3
4.6 kg
0
Frontal: 260 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1302 / 155 / 36 mm
dB
Connector position
Wind load
Horizontal Pattern
< 1.3 (1710 – 1880 MHz) < 1.5 (1880 – 1900 MHz)
Intermodulation IM3 (2 x 43 dBm carrier) Max. power
0
50 Ω
Impedance VSWR
3
dB
10
Half-power beam width
Vertical Pattern
VPol F- 1800 65° 18dBi 2°T Type No. Frequency range Polarization Gain
735 147 120°
1710 – 1900 MHz
65°
Vertical 18 dBi
Side lobe suppression Front-to-back ratio Impedance VSWR Intermodulation IM3 (2 x 43 dBm carrier) Max. power Input
3
2°, fixed
0
Horizontal Pattern
above horizon for first sidelobe better or equal 14 dB below maximum gain > 25 dB 50 Ω < 1.3 (1710 – 1880 MHz) < 1.5 (1880 – 1900 MHz)
7°
< –150 dBc
10
200 Watt (at 50 °C ambient temperature)
3
7-16 female
dB
Electrical downtilt
H-plane: 65° E-plane: 7°
dB
10
Half-power beam width
0
Connector position
Bottom
Vertical Pattern
Weight
4.6 kg
– 2° electr. downtilt – first null-fill below horizon better or equal to –25 dB below maximum gain
Wind load
Frontal: 260 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1302 / 155 / 36 mm
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
116
F- Vertical Polarization Half-power Beam Width
1800 V 90°
VPol F- 1800 90° 8dBi
734 318
Frequency range
1710 – 1900 MHz
Polarization
H-plane: 90° E-plane: 55°
Front-to-back ratio
3
> 19 dB
0
50 Ω
Impedance VSWR
dB
8 dBi
Half-power beam width
Horizontal Pattern
< 1.3 (1710 – 1880 MHz) < 1.5 (1880 – 1900 MHz)
Intermodulation IM3 (2 x 43 dBm carrier)
Input
90° 180°
Vertical
Gain
Max. power
734 319
< –150 dBc
55°
200 Watt (at 50 °C ambient temperature) 7-16 female
Connector position
N female
10
Bottom or top
Weight
1.4 kg
Wind load
Frontal: 30 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
182 / 155 / 49 mm
3
dB
Type No.
0
Vertical Pattern
VPol F- 1800 90° 11dBi
Polarization Gain Half-power beam width Front-to-back ratio Impedance VSWR Intermodulation IM3 (2 x 43 dBm carrier) Max. power Input Connector position Weight Wind load
734 320 1710 – 1900 MHz
90° 180°
Vertical 11 dBi H-plane: 90° E-plane: 30° > 22 dB 50 Ω
3
dB
Frequency range
0
Horizontal Pattern
< 1.3 (1710 – 1880 MHz) < 1.5 (1880 – 1900 MHz) < –150 dBc 30°
200 Watt (at 50 °C ambient temperature) 7-16 female
10
Bottom or top 1.9 kg Frontal: 60 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
342 / 155 / 49 mm
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
3
dB
Type No.
0
Vertical Pattern
117
F- Vertical Polarization Half-power Beam Width
1800 V 90°
VPol F- 1800 90° 16.5dBi 2°T
734 328
Frequency range Polarization
Vertical
Gain
16.5 dBi
Half-power beam width
H-plane: 90° E-plane: 7°
Electrical downtilt
2°, fixed
> 23 dB 50 Ω
Impedance
< 1.3 (1710 – 1880 MHz) < 1.5 (1880 – 1900 MHz)
Intermodulation IM3 (2 x 43 dBm carrier) Max. power
0
Horizontal Pattern
above horizon for first sidelobe better or equal 14 dB below maximum gain
Front-to-back ratio
VSWR
3
7°
< –150 dBc
10
200 Watt (at 50 °C ambient temperature)
Input
3
7-16 female
dB
Sidelobe suppression
90° 180°
1710 – 1900 MHz
dB
Type No.
0
Connector position
Bottom
Vertical Pattern
Weight
4.6 kg
– 2° electr. downtilt – first null-fill below horizon better or equal to –25 dB below maximum gain
Wind load
Frontal: 250 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1302 / 155 / 49 mm
VPol F- 1800 90° 17.5dBi 2°T
Polarization Gain Half-power beam width Electrical downtilt Sidelobe suppression Front-to-back ratio Impedance VSWR Intermodulation IM3 (2 x 43 dBm carrier) Max. power Input
734 330
90° 180°
1710 – 1900 MHz Vertical 17.5 dBi H-plane: 90° E-plane: 5°
3
2°, fixed
dB
Frequency range
0
Horizontal Pattern
above horizon for first sidelobe better or equal 14 dB below maximum gain > 23 dB 50 Ω < 1.3 (1710 – 1880 MHz) < 1.5 (1880 – 1900 MHz)
5°
< –150 dBc
10
200 Watt (at 50 °C ambient temperature)
3
7-16 female
dB
Type No.
0
Connector position
Bottom
Vertical Pattern
Weight
6.9 kg
– 2° electr. downtilt – first null-fill below horizon better or equal to –25 dB below maximum gain
Wind load
Frontal: 380 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1942 / 155 / 49 mm
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
118
F- Vertical Polarization Half-power Beam Width Fixed Electrical Downtilt
1800 V 105° 2°
VPol F- 1800 105° 16dBi 2°T
Vertical
Gain
16 dBi
Electrical downtilt Sidelobe suppression Front-to-back ratio Impedance VSWR Intermodulation IM3 (2 x 43 dBm carrier) Max. power Input
195°
1710 – 1900 MHz
Polarization
Half-power beam width
105°
H-plane: 105° E-plane: 7°
3
2°, fixed
dB
Frequency range
734 342
0
Horizontal Pattern
above horizon for first sidelobe better or equal 14 dB below maximum gain > 20 dB 50 Ω < 1.3 (1710 – 1880 MHz) < 1.5 (1880 – 1900 MHz)
7°
< –150 dBc
10
200 Watt (at 50 °C ambient temperature)
3
7-16 female
dB
Type No.
0
Connector position
Bottom
Vertical Pattern
Weight
4.9 kg
– 2° electr. downtilt – first null-fill below horizon better or equal to –25 dB below maximum gain
Wind load
Frontal: 250 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1302 / 155 / 49 mm
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
119
120
Omnidirectional Antennas
Solid, reliable construction
Omnidirectional antennas are often installed at exposed sites on the top of masts, so special attention has been paid to their mechnical construction. The exceptionally stiff fiberglass tube with low tip deflection will withstand wind velocities of up to 200 km/h.
Excellent grounding
From the solid metal tip right down to the base of the high gain antennas the grounding crosssection is 22 mm2 copper or more, exceeding EN 50083-1.
Environmental influences
The design of Kathrein antennas is based on fundamental engineering knowledge and also on decades of practical experience, during which the various constructions and materials used have proved their outstanding reliability.
Environmental conditions
Kathrein cellular antennas are designed to operate under the environmental conditions as described in ETS 300 019-1-4 class 4.1 E. The antennas exceed this standard with regard to the following items: – Low temperature: – 55 °C – High temperature (dry): + 60 °C
Environmental tests
Kathrein antennas have ed environmental tests as recommended in ETS 300 019-2-4. The homogenous design of Kathrein’s antenna families use identical modules and materials. Extensive tests have been performed on typical samples and modules.
Long service life
According to our own experience, the outstanding mechanical characteristics of Kathrein antennas result in an antenna service life of over 15 years.
Low intermodulation From on our many years of experience products (typically –150 dBc) in the construction of antennas and from our extensive research into the effects of intermodulation, we have been able to optimize the material used for these antennas. (The indicated values refer to 3rd order products measured with 2 carriers of 20 W each). Integrated mast attachment
Integrated into the antenna base are two easily mountable U-bolt brackets, suitable for masts of diameters from 50 to 94 mm or 30 to 105 mm.
121
Summary – Omnidirectional Antennas 800/900/1800/2000
Vertical Polarization – 800/900 Type
Type No.
Frequency Connector Height range [MHz] female [mm]
Remarks
Page
VPol Omni 900 VPol Omni 800/900 VPol Omni 800/900
360° 360° 360°
2 dBi 2 dBi 2 dBi
738 450 K 75 11 61 K 75 11 67
870 – 960 806 – 960 806 – 960
N N 7-16
180 273 273
indoor/outdoor 123 124 124
VPol Omni VPol Omni
900 900
360° 360°
5 dBi 5 dBi
K 75 15 64 1 K 75 15 64 7
890 – 960 890 – 960
N 7-16
635 635
125 125
VPol Omni VPol Omni VPol Omni
900 900 900
360° 360° 360°
8 dBi 8 dBi 8 dBi
736 350 736 351 741 558
870 – 960 870 – 960 870 – 960
7-16 7-16 7-16
1543 1536 1764
VPol Omni
800
360°
11 dBi
738 192
824 – 894
7-16
3237
VPol Omni VPol Omni VPol Omni
900 900 900
360° 360° 360°
11 dBi 11 dBi 11 dBi
736 347 736 348 738 779
870 – 960 870 – 960 870 – 960
7-16 7-16 7-16
3033 3022 3254
inverted special base
129 129 130
VPol Omni
900
360°
11 dBi
736 352
870 – 960
7-16
3233
lightning rod
131
VPol Omni VPol Omni
900 900
360° 10.5 dBi 5°T 360° 10.5 dBi 5°T
736 349 738 664
870 – 960 870 – 960
7-16 7-16
2954 2856
inverted
132 132
738 449
870 – 960 1710 – 1880
N
216
indoor/outdoor 133
739 785
1710 – 1880
7-16
800
134
738 187 739 404 737 190
1710 – 1880 1700 – 1880 1710 – 1880
7-16 7-16 7-16
1570 1558 1560
738 454
1710 – 2170
N
115
indoor/outdoor 137
1920 – 2170
7-16
1390
138
inverted special base
126 126 127 128
Vertical Polarization – Dual-band 900/1800 VPol Omni 900/1800
360°
2 dBi
Vertical Polarization – 1800 VPol Omni
1800
360°
VPol Omni VPol Omni VPol Omni
1800 1800 1800
360° 360° 360°
8 dBi 11 dBi 11 dBi 11 dBi 6°T
inverted
135 135 136
Vertical Polarization – 1800/2000 VPol Omni 1710–2170
360°
2 dBi
New Product
Vertical Polarization – 2000 VPol Omni
2000
360°
11 dBi
741 790
122
Omnidirectional Antenna Vertical Polarization Indoor and outdoor use
900 V
VPol Omni 900 360° 2dBi
738 450
Type No. Input
N female
Connector position
Bottom or top 870 – 960 MHz
VSWR
< 1.5
Gain
2 dBi
Impedance
50 Ω
Polarization
Vertical
Max. power
100 Watt (at 50 °C ambient temperature)
Weight
200 g
Radome diameter
20 mm
Height
180 mm
Material:
Radiator: Brass. Radome: Fiberglass, colour: White.
Mounting:
One hole mounting (16 mm diameter) to surfaces of max. 10 mm thickness.
Grounding:
All metal parts of the antenna as well as the inner conductor and the mounting kit are DC grounded.
180 mm
Frequency range
78°
3
dB
10
0
Vertical Pattern
123
Omnidirectional Antennas Vertical Polarization
806 – 960 V
VPol Omni 806–960 360° 2dBi
K 75 11 61 K 75 11 67
Type No. Frequency range
806 – 960 MHz Vertical
Gain
2 dBi
Impedance
50 Ω
VSWR
348 mm
Polarization
< 1.5
Max. power
100 Watt (at 50 °C ambient temperature)
Mounting:
The antenna can be attached in two ways with the supplied mounting kit: 1. On the tip of a tubular mast of 40 – 54 mm diameter (connecting cable runs inside the mast). 2. Laterally at the tip of a tubular mast of 20 – 54 mm diameter (connecting cable runs outside the mast).
Material:
Radiator: Brass. Radome: Fiberglass, colour: Grey. Base: Weather-proof aluminum. Mounting kit, screws and nuts: Stainless steel.
Grounding:
All metal parts of the antenna as well as the inner conductor and the mounting kit are DC grounded.
78°
3
dB
10
0
Vertical Pattern
Mechanical specifications Input
7-16 female Bottom 0.74 kg
Max. wind velocity Packing size
Brackets for side mounting (see page 182 – 184)
N female
Weight
Wind load
Laterally at the tip
K 75 11 67
Connector position
Radome diameter
On the tip
K 75 11 61
Height
21 mm 17 N (at 150 km/h) 200 km/h 455 x 112 x 97 mm 348 mm
124
Omnidirectional Antennas Vertical Polarization
900 V
VPol Omni 900 360° 5dBi
K 75 15 64 1 K 75 15 64 7
Type No. Frequency range
890 – 960 MHz
Polarization
Vertical
Gain
5 dBi
Impedance
50 Ω
VSWR
< 1.5 250 Watt (at 50 °C ambient temperature)
Mounting:
The antenna can be attached in two ways with the supplied mounting kit: 1. On the tip of a tubular mast of 40 – 54 mm diameter (connecting cable runs inside the mast). 2. Laterally at the tip of a tubular mast of 20 – 54 mm diameter (connecting cable runs outside the mast).
Material:
Radiator: Brass. Radome: Fiberglass, colour: Grey. Base: Weather-proof aluminum. Mounting kit, screws and nuts: Stainless steel.
Grounding:
All metal parts of the antenna as well as the inner conductor and the mounting kit are DC grounded.
715 mm
Max. power
30°
3
dB
10
0
Vertical Pattern
Mechanical specifications Input
7-16 female Bottom 0.90 kg
Max. wind velocity Packing size
Brackets for side mounting (see page 182 – 184)
N female
Weight
Wind load
Laterally at the tip
K 75 15 64 7
Connector position
Radome diameter
On the tip
K 75 15 64 1
Height
21 mm 20 N (at 150 km/h) 200 km/h 825 x 112 x 97 mm 715 mm
125
Omnidirectional Antennas Vertical Polarization
900 V
VPol Omni 900 360° 8dBi
736 350
Type No. Frequency range
736 351
870 – 960 MHz
Polarization
Vertical
Gain
8 dBi
Impedance
50 Ω < 1.5
Intermodulation IM3 (2 x 43 dBm carrier)
1543 mm
VSWR
< –150 dBc
Max. power
500 Watt (at 50 °C ambient temperature)
Mounting:
The antenna can be attached laterally at the tip of a tubular mast of 50 – 94 mm diameter with two U-bolt brackets supplied with the antenna (connecting cable runs outside the mast).
Material:
Radiator: Copper and brass. Radome: Fiberglass, colour: Grey. Base: Weather-proof aluminum. Mounting kit, screws and nuts: Stainless steel.
Excellent grounding:
From the solid metal tip right down to the base of the high gain antennas the grounding crosssection is 22 mm2 copper or more, exceeding EN 50083-1.
736 350
13°
3
dB
10
0
Vertical Pattern
Mechanical specifications Input
um maximtop mast
230
Connector position
736 350
736 351
7-16 female
7-16 female
Bottom
Top
Weight
5.5 kg
150
Radome diameter Wind load Max. wind velocity Packing size
51 mm 130 N (at 150 km/h) 200 km/h 1846 x 148 x 112 mm
104
Height
Brackets for side mounting (see page 182 – 184)
1543 mm
1536 mm
126
Omnidirectional Antenna Vertical Polarization
900 V
• Special base
VPol Omni 900 360° 8dBi Type No.
741 558
Frequency range
870 – 960 MHz
Polarization
Vertical
Gain
8 dBi
Impedance
50 Ω
VSWR
< 1.5 < –150 dBc
Max. power
1764 mm
Intermodulation IM3 (2 x 43 dBm carrier)
500 Watt (at 50 °C ambient temperature)
Mounting:
The antenna can be attached in two ways with the supplied mounting kit: 1. On the tip of a tubular mast of 65 – 105 mm diameter (connecting cable runs inside the mast). 2. Laterally at the tip of a tubular mast of 30 – 90 mm diameter (connecting cable runs outside the mast).
Material:
Radiator: Copper and brass. Radome: Fiberglass, colour: Grey. Base: Weather-proof aluminum. Mounting kit, screws and nuts: Stainless steel.
Grounding:
The antenna is DC grounded via a copper tube having a cross-sectional area of 22 mm2. The inner conductor is coupled capacitively.
13°
3
dB
10
0
Vertical Pattern
Mechanical specifications Input Connector position Weight Radome diameter Wind load Max. wind velocity Packing size On the tip
Laterally at the tip
Brackets for side mounting (see page 182 – 184)
Height
7-16 female Bottom 6 kg 51 mm 135 N (at 150 km/h) 200 km/h 1950 x 198 x 152 mm 1764 mm
127
Omnidirectional Antenna Vertical Polarization
800 V
VPol Omni 800 360° 11dBi Type No.
738 192
Frequency range
824 – 894 MHz
Polarization
Vertical
Gain
11 dBi 50 Ω
Impedance VSWR
< 1.5
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc 500 Watt (at 50 °C ambient temperature)
Mounting:
The antenna can be attached laterally at the tip of a tubular mast of 50 – 94 mm diameter with two U-bolt brackets supplied with the antenna (connecting cable runs outside the mast).
Material:
Radiator: Copper and brass. Radome: Fiberglass, colour: Grey. Base: Weather-proof aluminum. Mounting kit, screws and nuts: Stainless steel.
Excellent grounding:
From the solid metal tip right down to the base of the high gain antennas the grounding crosssection is 22 mm2 copper or more, exceeding EN 50083-1.
3237 mm
Max. power
7°
738 192
3
dB
10
0
Vertical Pattern
Mechanical specifications Input
230
um maximtop mast
Connector position
Bottom
Weight
8.5 kg
Radome diameter
150
7-16 female
Wind load Max. wind velocity Packing size
51 mm 230 N (at 150 km/h) 180 km/h 3516 x 148 x 112 mm
104
Height
Brackets for side mounting (see page 182 – 184)
3237 mm
128
Omnidirectional Antennas Vertical Polarization
900 V
VPol Omni 900 360° 11dBi
736 347
Type No. Frequency range
736 348
870 – 960 MHz
Polarization
Vertical
Gain
11 dBi 50 Ω
Impedance VSWR
< 1.5
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc 500 Watt (at 50 °C ambient temperature)
Mounting:
The antenna can be attached laterally at the tip of a tubular mast of 50 – 94 mm diameter with two U-bolt brackets supplied with the antenna (connecting cable runs outside the mast).
Material:
Radiator: Copper and brass. Radome: Fiberglass, colour: Grey. Base: Weather-proof aluminum. Mounting kit, screws and nuts: Stainless steel.
Excellent grounding:
From the solid metal tip right down to the base of the high gain antennas the grounding crosssection is 22 mm2 copper or more, exceeding EN 50083-1.
3033 mm
Max. power
7°
736 347
3
dB
10
0
Vertical Pattern
Mechanical specifications Input
um maximtop mast
230
Connector position
736 347
736 348
7-16 female
7-16 female
Bottom
Top
Weight
8 kg
150
Radome diameter Wind load Max. wind velocity Packing size
51 mm 210 N (at 150 km/h) 200 km/h 3316 x 148 x 112 mm
104
Height
Brackets for side mounting (see page 182 – 184)
3033 mm
3022 mm
129
Omnidirectional Antenna Vertical Polarization
900 V
• Special base
VPol Omni 900 360° 11dBi Type No.
738 779
Frequency range
870 – 960 MHz
Polarization
Vertical
Gain
11 dBi 50 Ω
Impedance VSWR
< 1.5 < –150 dBc
Max. power
3254 mm
Intermodulation IM3 (2 x 43 dBm carrier)
500 Watt (at 50 °C ambient temperature)
Mounting:
The antenna can be attached in two ways with the supplied mounting kit: 1. On the tip of a tubular mast of 65 – 105 mm diameter (connecting cable runs inside the mast). 2. Laterally at the tip of a tubular mast of 30 – 90 mm diameter (connecting cable runs outside the mast).
Material:
Radiator: Copper and brass. Radome: Fiberglass, colour: Grey. Base: Weather-proof aluminum. Mounting kit, screws and nuts: Stainless steel.
Grounding:
The antenna is DC grounded via a copper tube having a cross-sectional area of 22 mm2. The inner conductor is coupled capacitively.
7°
3
dB
10
0
Vertical Pattern
Mechanical specifications Input Connector position
Bottom
Weight
8.5 kg
Radome diameter Wind load Max. wind velocity Packing size On the tip
Laterally at the tip
Brackets for side mounting (see page 182 – 184)
7-16 female
Height
51 mm 215 N (at 150 km/h) 200 km/h 3440 x 198 x 152 mm 3254 mm
130
Omnidirectional Antenna Vertical Polarization
900 V
• Lightning rod
VPol Omni 900 360° 11dBi Type No.
736 352
Frequency range
870 – 960 MHz
Polarization
Vertical
Gain
11 dBi 50 Ω
Impedance VSWR
< 1.5
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc 500 Watt (at 50 °C ambient temperature)
Mounting:
The antenna can be attached laterally at the tip of a tubular mast of 50 – 94 mm diameter with two U-bolt brackets supplied with the antenna (connecting cable runs outside the mast).
Material:
Radiator: Copper and brass. Radome: Fiberglass, colour: Grey. Base: Weather-proof aluminum. Mounting kit, screws and nuts: Stainless steel.
Excellent grounding:
From the solid metal tip right down to the base of the high gain antennas the grounding crosssection is 22 mm2 copper or more, exceeding EN 50083-1.
3233 mm
Max. power
7°
3
dB
10
0
Vertical Pattern
Mechanical specifications Input
230
um maximtop mast
Connector position
Bottom
Weight
8.5 kg
Radome diameter
150
7-16 female
Wind load Max. wind velocity Packing size
51 mm 220 N (at 150 km/h) 200 km/h 3504 x 188 x 122 mm
104
Height
3233 mm
131
Omnidirectional Antennas Vertical Polarization Fixed Electrical Downtilt
900 V 5°
VPol Omni 900 360° 10.5dBi 5°T
736 349
Type No. Frequency range
738 664
870 – 960 MHz
Polarization
Vertical
Gain
10.5 dBi
Electrical tilt
5°, fixed
Impedance
50 Ω
VSWR
< 1.5 < –150 dBc
Max. power
2954 mm
Intermodulation IM3 (2 x 43 dBm carrier)
500 Watt (at 50 °C ambient temperature)
Mounting:
The antenna can be attached laterally at the tip of a tubular mast of 50 – 94 mm diameter with two U-bolt brackets supplied with the antenna (connecting cable runs outside the mast).
Material:
Radiator: Copper and brass. Radome: Fiberglass, colour: Grey. Base: Weather-proof aluminum. Mounting kit, screws and nuts: Stainless steel.
Excellent grounding:
From the solid metal tip right down to the base of the high gain antennas the grounding crosssection is 22 mm2 copper or more, exceeding EN 50083-1.
7°
736 349
3
dB
10
0
Vertical Pattern 5° electrical downtilt
Mechanical specifications Input
um maximtop mast
230
Connector position
736 349
738 664
7-16 female
7-16 female
Bottom
Top
Weight
8 kg
150
Radome diameter Wind load Max. wind velocity Packing size
51 mm 210 N (at 150 km/h) 200 km/h 3316 x 148 x 112 mm
104
Height
Brackets for side mounting (see page 182 – 184)
2954 mm
2856 mm
132
Dual-band Omnidirectional Antenna Vertical Polarization Indoor and outdoor use
900/1800 V
VPol Omni 900/1800 360° 2dBi
738 449
Type No. Input
N female
Connector position
Bottom or top 870 – 960 MHz / 1710 – 1880 MHz
VSWR
< 1.7
Gain
2 dBi
Impedance
50 Ω
Polarization
Vertical
Max. power
50 Watt: 870 – 960 MHz 50 Watt: 1710 – 1880 MHz (at 50 °C ambient temperature)
Weight
250 g
Radome diameter
20 mm
Height
216 mm
Material:
Radiator: Brass. Radome: Fiberglass, colour: White.
Mounting:
One hole mounting (16 mm diameter) to surfaces of max. 10 mm thickness.
216 mm
Frequency range
78°
3
dB
10
0
Vertical Pattern
133
Omnidirectional Antenna Vertical Polarization
1800 V
VPol Omni 1800 360° 8dBi
739 785
Type No. Frequency range
1710 – 1880 MHz Vertical
Gain
8 dBi
Impedance
50 Ω
VSWR
807 mm
Polarization
< 1.5
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power
200 Watt (at 50 °C ambient temperature)
Mounting:
The antenna can be attached laterally at the tip of a tubular mast of 50 – 94 mm diameter with one U-bolt bracket supplied with the antenna (connecting cable runs outside the mast).
Material:
Radiator: Copper and brass. Radome: Fiberglass, colour: Grey. Base: Weather-proof aluminum. Mounting kit, screws and nuts: Stainless steel.
Excellent grounding:
From the solid metal tip right down to the base of the high gain antennas the grounding crosssection is 22 mm2 copper or more, exceeding EN 50083-1.
13°
3
dB
10
0
Vertical Pattern
Mechanical specifications Input 130
um maximtop mast
Connector position Weight Radome diameter
104
Wind load Max. wind velocity Packing size Height
Brackets for side mounting (see page 182 – 184)
7-16 female Bottom 4 kg 51 mm 90 N (at 150 km/h) 200 km/h 986 x 148 x 112 mm 807 mm
134
Omnidirectional Antennas Vertical Polarization
1800 V
VPol Omni 1800 360° 11dBi
738 187
Type No. Frequency range
739 404
1710 – 1880 MHz
Polarization
Vertical
Gain
11 dBi 50 Ω
Impedance
< 1.3
Intermodulation IM3 (2 x 43 dBm carrier)
1568 mm
VSWR
< –150 dBc
Max. power
200 Watt (at 50 °C ambient temperature)
Mounting:
The antenna can be attached laterally at the tip of a tubular mast of 50 – 94 mm diameter with two U-bolt brackets supplied with the antenna (connecting cable runs outside the mast).
Material:
Radiator: Copper and brass. Radome: Fiberglass, colour: Grey. Base: Weather-proof aluminum. Mounting kit, screws and nuts: Stainless steel.
Excellent grounding:
From the solid metal tip right down to the base of the high gain antennas the grounding crosssection is 22 mm2 copper or more, exceeding EN 50083-1.
738 187
7°
3
dB
10
0
Vertical Pattern
Mechanical specifications Input
um maximtop mast
230
Connector position
738 187
739 404
7-16 female
7-16 female
Bottom
Top
Weight
5.5 kg
150
Radome diameter Wind load Max. wind velocity Packing size
51 mm 130 N (at 150 km/h) 200 km/h 1846 x 148 x 112 mm
104
Height
Brackets for side mounting (see page 182 – 184)
1568 mm
1558 mm
135
Omnidirectional Antenna Vertical Polarization Fixed Electrical Downtilt
1800 V 6°
VPol Omni 1800 360° 11dBi 6°T
737 190
Type No. Frequency range
1710 – 1880 MHz
Polarization
Vertical
Gain
11 dBi 6°, fixed
Impedance
50 Ω
VSWR
< 1.3
Intermodulation IM3 (2 x 43 dBm carrier)
1560 mm
Electrical tilt
< –150 dBc
Max. power
200 Watt (at 50 °C ambient temperature)
Mounting:
The antenna can be attached laterally at the tip of a tubular mast of 50 – 94 mm diameter with two U-bolt brackets supplied with the antenna (connecting cable runs outside the mast).
Material:
Radiator: Copper and brass. Radome: Fiberglass, colour: Grey. Base: Weather-proof aluminum. Mounting kit, screws and nuts: Stainless steel.
Excellent grounding:
From the solid metal tip right down to the base of the high gain antennas the grounding crosssection is 22 mm2 copper or more, exceeding EN 50083-1.
7°
3
dB
10
0
Vertical Pattern 6° electrical downtilt
Mechanical specifications Input
230
um maximtop mast
Connector position
Bottom
Weight
5.5 kg
Radome diameter
150
7-16 female
Wind load Max. wind velocity Packing size
51 mm 130 N (at 150 km/h) 200 km/h 1846 x 148 x 112 mm
104
Height
Brackets for side mounting (see page 182 – 184)
1560 mm
136
Omnidirectional Antenna Vertical Polarization Indoor and outdoor use
1710 –2170 V
VPol Omni 1710–2170 360° 2dBi
738 454
Type No. Input
N female
Connector position
Bottom or top 1710 – 2170 MHz
VSWR
< 1.5
Gain
2 dBi
Impedance
50 Ω
Polarization
Vertical
Max. power
50 Watt (at 50 °C ambient temperature)
Weight
150 g
Radome diameter
20 mm
Height
115 mm
Material:
Radiator: Brass. Radome: Fiberglass, colour: White.
Mounting:
One hole mounting (16 mm diameter) to surfaces of max. 10 mm thickness.
Grounding:
All metal parts of the antenna and the mounting kit are DC grounded. The inner conductor is not DC grounded.
115 mm
Frequency range
78°
3
dB
10
0
Vertical Pattern
137
Omnidirectional Antenna Vertical Polarization
2000 V
VPol Omni 2000 360° 11dBi
741 790
Type No. Frequency range
1920 – 2170 MHz
Polarization
Vertical
Gain
11 dBi 50 Ω
Impedance
< 1.5
Intermodulation IM3 (2 x 43 dBm carrier)
1387 mm
VSWR
< –150 dBc
Max. power
150 Watt (at 50 °C ambient temperature)
Mounting:
The antenna can be attached laterally at the tip of a tubular mast of 50 – 94 mm diameter with one U-bolt bracket supplied with the antenna (connecting cable runs outside the mast).
Material:
Radiator: Copper and brass. Radome: Fiberglass, colour: Grey. Base: Weather-proof aluminum. Mounting kit, screws and nuts: Stainless steel.
Excellent grounding:
From the solid metal tip right down to the base of the high gain antennas the grounding crosssection is 22 mm2 copper or more, exceeding EN 50083-1.
7°
3
dB
10
0
Vertical Pattern
Mechanical specifications Input 130
um maximtop mast
Connector position Weight Radome diameter
104
Wind load Max. wind velocity Packing size Height
Brackets for side mounting (see page 182 – 184)
7-16 female Bottom 5 kg 51 mm 120 N (at 150 km/h) 200 km/h 1570 x 148 x 112 mm 1387 mm
138
Indoor Antennas
These antennas have a particularly unobtrusive appearance. Apart from standard single band antennas, multi-band versions are also available. Single-band antennas The λ/2 omnidirectional antenna for normal ceiling mounting purposes does not need an additional groundplane. Only a single hole is required. For thicker ceilings a mounting plate is supplied. The extremely flat directional antenna is supplied with a mounting plate for attachment to a wall. The antenna is inserted into the plate and clicks in. Multi-band antennas The low silhouette omnidirectional and directional antennas for AMPS, GSM, PCN, DECT, PCS and UMTS in combination with broadband power splitters enable compact and inexpensive indoor networks to be installed. Indoor / Outdoor antennas Unobtrusive omni antennas for both 900 and 1800 and also dual-band are now available especially for microcell applications. These versions are similar to our Indoor Antennas, but are suitable for outdoor operation and are fitted with an N connector.
139
Summary – Indoor Antennas
Vertical Polarization
Single-band Type
Type No.
Frequency range
Connector female
Page
VPol Indoor 900
90° 7 dBi
736 624
870 – 960 MHz
N
141
VPol Indoor 900
360° 2 dBi
737 031
870 – 960 MHz
N
142
VPol Indoor 1800
90° 8 dBi
736 935
1710 – 1900 MHz
N
143
VPol Indoor 1800
360° 2 dBi
736 361
1710 – 1900 MHz
N
144
VPol BiDir 800/2000
65° 5 dBi
738 446
824 – 960 MHz and 1710 – 2170 MHz
N
145
VPol Indoor 800/1900
90° 7 dBi
738 573
824 – 960 MHz and 1710 – 1990 MHz
N
146
VPol Indoor 800/2000
90° 7 dBi
742 149
824 – 960 MHz and 1710 – 2170 MHz
N
147
VPol Indoor 900/2000
360° 2 dBi
741 571
876 – 960 MHz and 1710 – 2170 MHz
N
148
VPol Indoor 800/2000
360° 2 dBi
741 572
824 – 960 MHz and 1425 – 2170 MHz
N
148
738 450
870 – 960 MHz
N
149
Multi-band
Indoor / Outdoor – Single-band VPol Omni 900
360° 2 dBi
Indoor / Outdoor – Dual-band / Multi-band VPol Omni 900/1800
360° 2 dBi
738 449
870 – 960 MHz and 1710 – 1880 MHz
N
150
VPol Omni 1710–2170
360° 2 dBi
738 454
1710 – 2170 MHz
N
151
New Product
140
Indoor Directional Antenna Vertical Polarization Half-power Beam Width
900 V 90°
• Flat design
VPol Indoor 900 90° 7dBi
736 624
Type No. Input
Cable RG 223/CU of 1m length, white, with N female connector
Frequency range
870 – 960 MHz
VSWR
< 1.5
Gain
7 dBi
Impedance
50 Ω
Half-power beam width
H-plane: 90°/ E-plane: 65°
Polarization
Vertical
Max. power
50 Watt (at 50 °C ambient temperature)
Weight
500 g
Material:
Mounting:
Grounding:
205 / 155 / 32 mm Radiator: Brass. Radome: ABS, colour: White. Reflector: Aluminum. Mounting plates: Stainless steel. Two holes of 6 mm diameter in the mounting plate are provided for this purpose. All metal parts as well as the inner conductor are DC grounded.
90°
10
3
dB
Height/width/depth
0
Horizontal Pattern
65°
3
dB
10
0
Vertical Pattern
Mounting:
Mounting the attachment plate
Aligning the antenna
Pulling the antenna downwards
Mount the attachment plate to the wall using two screws of 4 mm diameter in the position as indicated.
Align the antenna over the attachment plate, keeping the cable in the middle of the plate.
Pull the antenna downwards until it clicks into place.
141
Indoor Omnidirectional Antenna Vertical Polarization Single-band
900 V
• The antenna needs no additional groundplane.
VPol Indoor 900 360° 2dBi
737 031
Type No. Input
Cable RG 223/CU of 1m length, white, with N female connector
Frequency range
870 – 960 MHz
VSWR
< 1.5
Gain
2 dBi
Impedance
50 Ω
Polarization
Vertical
Max. power
50 Watt (at 50 °C ambient temperature)
Weight
200 g
Radome diameter
20 mm
Mounting plate
115 x 25 mm
Height
201 mm
Material:
Radiator: Brass. Radome: Fiberglass, colour: White. Additional mounting plate: Aluminum.
Mounting:
Two holes of 5.5 mm diameter in the mounting plate.
Grounding:
All metal parts inclusive the inner conductor are DC grounded.
Min. Ø 22
Ceiling
Mounting plate Ø 5.5
90
142
Indoor Directional Antenna Vertical Polarization Half-power Beam Width
1800 V 90°
• Flat design
VPol Indoor 1800 90° 8dBi
736 935
Type No.
Cable RG 223/CU of 1m length, white, with N female connector
Frequency range
1710 – 1900 MHz
VSWR
< 1.5
Gain
8 dBi
Impedance
50 Ω
Polarization
Vertical
Front-to-back ratio
> 18 dB
Half-power beam width Max. power
H-plane: 90° / E-plane: 65° 25 Watt (at 50 °C ambient temperature)
Weight
200 g
Packing size Height/width/depth Material:
90°
290 x 105 x 30 mm 159 / 94 / 23 mm Radiator: Brass. Radome: ABS, colour: White. Reflector: Aluminum. Mounting plates: Stainless steel.
10
3
dB
Input
0
Mounting:
Two holes of 6 mm diameter in the mounting plate.
Grounding:
All metal parts inclusive the inner conductor are DC grounded.
Horizontal Pattern
65°
3
dB
10
0
Vertical Pattern
Mounting:
Mount the attachment plate to the wall using two screws of 4 mm diameter in the position as indicated.
Align the antenna over the attachment plate, keeping the cable in the middle of the plate.
Pull the antenna downwards until it clicks into place.
143
Indoor Omnidirectional Antenna Vertical Polarization Single-band
1800 V
• The antenna needs no additional groundplane.
VPol Indoor 1800 360° 2dBi
736 361
Type No. Input
Cable RG 223/CU of 1m length, white, with N female connector
Frequency range
1710 – 1900 MHz
VSWR
< 1.5
Gain
2 dBi
Impedance
50 Ω
Polarization
Vertical
Max. power
25 Watt (at 50 °C ambient temperature)
Weight
120 g
Radome diameter
20 mm
Mounting plate
115 x 25 mm
Packing size
app. 250 x 130 x 25 mm
Height
121 mm
Material:
Radiator: Brass. Radome: Fiberglass, colour: White. Additional mounting plate: Aluminum.
Mounting:
Two holes of 5.5 mm diameter in the mounting plate.
Grounding:
All metal parts inclusive the inner conductor are DC grounded.
Min. Ø 22
Ceiling
Mounting plate Ø 5.5
90
144
Multi-band Bidirectional Antenna Vertical Polarization Half-power Beam Width
800/2000 V 65°
VPol BiDir 800/2000 65° 5dBi
738 446
Type No. Input
1 x N female
Frequency range
824 – 960 MHz, 1710 – 2170 MHz < 1.5 824 – 960 MHz: 5 dBi 1710 – 1880 MHz: 5.5 dBi 1880 – 2170 MHz: 6.5 dBi
Impedance
50 Ω
Polarization
Vertical
Max. power (total)
372 mm
Gain
400 mm
VSWR
200 Watt (at 50 °C ambient temperature)
Weight
0.8 kg
Wind load
Frontal: Lateral: Rearside:
Max. wind velocity
25 N (at 150 km/h) 65 N (at 150 km/h) 35 N (at 150 km/h) 200 km/h
Packing size
422 x 212 x 95 mm
Height/width/depth
310 / 55 / 190 mm
Material:
Radiator: Tin plated copper. Reflector: Weather-proof aluminum. Radome: High impact plastic, colour: Grey. All screws and nuts: Stainless steel.
Mounting:
Wall mounting: No additional mounting kit needed. For pipe mast mounting use clamps listed below (order separately).
Ice protection:
The radiating system is protected by the radome. Due to its very sturdy construction, the antenna remains operational even under icy conditions.
Grounding:
All metal parts of the antenna as well as the inner conductor are DC grounded.
8.5 mm
3
dB
10
0
Typical Horizontal Pattern
145
Indoor Directional Antenna Vertical Polarization Half-power Beam Width
800/1800 V 90°
• Flat design • The antenna can be operated in all frequency ranges simultaneously.
VPol Indoor 900/1800 90° 7dBi
738 573
Type No. Input Frequency range VSWR
Cable RG 223/CU of 1m length, white, with N female connector 824 – 960 MHz / 1710 – 1990 MHz 870 – 960 MHz and 1710 – 1900 MHz: < 1.6 824 – 960 MHz and 1710 – 1990 MHz: < 2.0 ≈ 7 dBi
Gain
50 Ω
Impedance
Horizontal: ≈ 90°
Half-power beam width Polarization
Vertical
Max. power
25 Watt (at 50 °C ambient temperature)
Weight
500 g
Packing size
321 x 165 x 50 mm
Height/width/depth
205 / 155 / 42 mm
Material:
Radiator: Brass. Radome: ABS, colour: White. Reflector: Aluminum. Mounting plates: Stainless steel.
Mounting:
Two holes of 6 mm diameter in the mounting plate.
Grounding:
All metal parts inclusive the inner conductor are DC grounded.
Available accessories:
Broadband power splitter (800 – 2200 MHz).
90°
3
dB
10
0
Horizontal Pattern
Mounting:
Mount the attachment plate to the wall using two screws of 4 mm diameter in the position as indicated.
Align the antenna over the attachment plate, keeping the cable in the middle of the plate.
Pull the antenna downwards until it clicks into place.
146
Indoor Directional Antenna Vertical Polarization Half-power Beam Width ● ●
800/2000 V 90°
Flat design The antenna can be operated in all frequency ranges simultaneously.
VPol Indoor 800/2000 90° 7dBi
742 149
Type No. Input Frequency range VSWR
Cable RG 223/CU of 1m length, white, with N female connector 824 – 960 MHz / 1710 – 2170 MHz 870 – 960 MHz and 1710 – 1900 MHz: < 1.6 824 – 960 MHz and 1710 – 2170 MHz: < 2.0 ≈ 7 dBi
Gain
50 Ω
Impedance
Horizontal: ≈ 90°
Half-power beam width Polarization
Vertical
Max. power
25 Watt (at 50 °C ambient temperature)
Weight
500 g
Packing size
321 x 165 x 50 mm
Height/width/depth
205 / 155 / 42 mm
Material:
Radiator: Brass. Radome: ABS, colour: White. Reflector: Aluminum. Mounting plates: Stainless steel.
Mounting:
Two holes of 6 mm diameter in the mounting plate.
Grounding:
All metal parts inclusive the inner conductor are DC grounded.
Available accessories:
Broadband power splitter (800 – 2200 MHz).
90°
3
dB
10
0
Horizontal Pattern
Mounting:
Mount the attachment plate to the wall using two screws of 4 mm diameter in the position as indicated.
Align the antenna over the attachment plate, keeping the cable in the middle of the plate.
Pull the antenna downwards until it clicks into place.
147
Indoor Omnidirectional Antennas Vertical Polarization Multi-band
800/2000 V
The antenna can be operated in all frequency ranges simultaneously. ● The antennas need no additional groundplane. ●
741 572: Indoor 800/2000 360° 2dBi 741 571: Indoor 900/2000 360° 2dBi Type No. Frequency range VSWR
∅ 260 mm
741 572
741 571
824 – 960 MHz 1425 – 2170 MHz
876 – 960 MHz 1710 – 2170 MHz
< 2.0: 824 – 960 MHz < 2.0: 1425 – 1710 MHz < 1.6: 1710 – 1990 MHz < 2.0: 1990 – 2170 MHz
< 1.8: 876 – 890 MHz < 1.6: 890 – 960 MHz < 1.6: 1710 – 1990 MHz < 2.0: 1990 – 2170 MHz
Input
1 x N female
Gain
2 dBi
Impedance
50 Ω
Polarization
741 572
Vertical
Max. power (per band)
50 Watt (at 50 °C ambient temperature)
Weight Diameter Height
400 g
300 g
260 mm
210 mm
78 mm (without connector)
Material:
Base: Aluminum. Protective housing: High impact polystyrol, colour: White. Additional painting is possible.
Mounting:
Three holes in the base enable a mounting on the ceiling. Two types of screws are supplied. For the N connector a hole in the ceiling with a diameter of 35 mm is required.
Grounding:
All metal parts including the inner conductor are DC grounded.
Available accessories:
Broadband power splitters and tappers (800 – 2200 MHz).
min. dia. 35 mm
3 holes dia. 5 mm
dia. 160 mm
N connector, female
13 mm
Clip the protective housing into position after the antenna has been mounted with the help of the three supplied screws.
148
Omnidirectional Antenna Vertical Polarization Indoor and outdoor use
900 V
VPol Omni 900 360° 2dBi
738 450
Type No. Input
N female
Connector position
Bottom or top 870 – 960 MHz
VSWR
< 1.5
Gain
2 dBi
Impedance
50 Ω
Polarization
Vertical
Max. power
100 Watt (at 50 °C ambient temperature)
Weight
200 g
Radome diameter
20 mm
Height
180 mm
Material:
Radiator: Brass. Radome: Fiberglass, colour: White.
Mounting:
One hole mounting (16 mm diameter) to surfaces of max. 10 mm thickness.
Grounding:
All metal parts of the antenna as well as the inner conductor and the mounting kit are DC grounded.
180 mm
Frequency range
78°
3
dB
10
0
Vertical Pattern
149
Dual-band Omnidirectional Antenna Vertical Polarization Indoor and outdoor use
900/1800 V
VPol Omni 900/1800 360° 2dBi
738 449
Type No. Input
N female
Connector position
Bottom or top 870 – 960 MHz / 1710 – 1880 MHz
VSWR
< 1.7
Gain
2 dBi
Impedance
50 Ω
Polarization
Vertical
Max. power
50 Watt: 870 – 960 MHz 50 Watt: 1710 – 1880 MHz (at 50 °C ambient temperature)
Weight
250 g
Radome diameter
20 mm
Height
216 mm
Material:
Radiator: Brass. Radome: Fiberglass, colour: White.
Mounting:
One hole mounting (16 mm diameter) to surfaces of max. 10 mm thickness.
216 mm
Frequency range
78°
3
dB
10
0
Vertical Pattern
150
Omnidirectional Antenna Vertical Polarization Indoor and outdoor use
1710 –2170 V
VPol Omni 1710–2170 360° 2dBi
738 454
Type No. Input
N female
Connector position
Bottom or top 1710 – 2170 MHz
VSWR
< 1.5
Gain
2 dBi
Impedance
50 Ω
Polarization
Vertical
Max. power
50 Watt (at 50 °C ambient temperature)
Weight
150 g
Radome diameter
20 mm
Height
115 mm
Material:
Radiator: Brass. Radome: Fiberglass, colour: White.
Mounting:
One hole mounting (16 mm diameter) to surfaces of max. 10 mm thickness.
Grounding:
All metal parts of the antenna and the mounting kit are DC grounded. The inner conductor is not DC grounded.
115 mm
Frequency range
78°
3
dB
10
0
Vertical Pattern
151
152
Low-loss Power Splitters and Tappers
Low-loss power splitters and tappers are used for combining antennas to obtain particular radiation patterns or to set up indoor distribution networks. Power splitters with the following features are available: – low-loss coaxial-line transformation – high power rating – equal (splitters) or unequal (tappers) power rating – suitability for indoor and outdoor use – extremely small dimensions – multi-band versions for 800 – 2200 MHz.
153
Summary – Low-loss Power Splitters
Type
2-way-Splitter 2-way-Splitter 3-way-Splitter 3-way-Splitter 4-way-Splitter 4-way-Splitter
Type No.
800/900 800/900 800/900 800/900 800/900 800/900
2-way-Splitter 1400/1900 3-way-Splitter 1400/1900 2-way-Splitter 2-way-Splitter 3-way-Splitter 3-way-Splitter 4-way-Splitter 4-way-Splitter
800–2200 800–2200 800–2200 800–2200 800–2200 800–2200
2-way-Splitter 800–2200 3-way-Splitter 800–2200 4-way-Splitter 800–2200
K K K K K K
63 63 63 63 63 63
20 20 20 20 20 20
62 62 63 63 64 64
Frequency range 1 7 1 7 1 7
K 63 55 8 K 63 56 8 737 737 737 737 737 737
303 304 305 306 307 308
K 63 22 62 1 K 63 22 63 1 K 63 22 64 1
790 790 790 790 790 790
– – – – – –
960 960 960 960 960 960
MHz MHz MHz MHz MHz MHz
Remark
Indoor/Outdoor 500 W Indoor/Outdoor 1000 W Indoor/Outdoor 500 W Indoor/Outdoor 1000 W Indoor/Outdoor 500 W Indoor/Outdoor 1000 W
1425 – 2000 MHz Indoor/Outdoor 1425 – 2000 MHz Indoor/Outdoor 800 800 800 800 800 800
– – – – – –
2200 2200 2200 2200 2200 2200
MHz MHz MHz MHz MHz MHz
800 – 2200 MHz 800 – 2200 MHz 800 – 2200 MHz
Max. power
Indoor/Outdoor Indoor/Outdoor Indoor/Outdoor Indoor/Outdoor Indoor/Outdoor Indoor/Outdoor
Connector Page female N 7-16 N 7-16 N 7-16
155 155 155 155 155 155
700 W 700 W
7-16 7-16
156 156
200 700 200 700 200 700
N 7-16 N 7-16 N 7-16
157 157 157 157 157 157
N N N
158 158 158
W W W W W W
Indoor Indoor Indoor
100 W 100 W 100 W
Remark
Max. power
New Products
Summary – Low-loss Power Tappers
Type
Type No.
2-way-Tapper 1800/1900 4.8/1.8 dB 2-way-Tapper 1800/1900 6.0/1.2 dB 2-way-Tapper 1800/1900 7.0/1.0 dB
737 965 737 966 737 967
Frequency range
1710 – 2000 MHz Indoor/Outdoor 1710 – 2000 MHz Indoor/Outdoor 1710 – 2000 MHz Indoor/Outdoor
2-way-Tapper 800–2200 7.0/1.0 dB K 63 23 60 61 2-way-Tapper 800–2200 10.4/0.4 dB K 63 23 61 01 2-way-Tapper 800–2200 15.1/0.1 dB K 63 23 61 51
800 – 2200 MHz 800 – 2200 MHz 800 – 2200 MHz
Indoor Indoor Indoor
2-way-Tapper 800–2200 7.0/1.0 dB K 63 23 60 67 2-way-Tapper 800–2200 10.4/0.4 dB K 63 23 61 07 2-way-Tapper 800–2200 15.1/0.1 dB K 63 23 61 57
800 – 2200 MHz Indoor/Outdoor 800 – 2200 MHz Indoor/Outdoor 800 – 2200 MHz Indoor/Outdoor
Connector Page female
700 W 700 W 700 W
7-16 7-16 7-16
159 159 159
100 W 100 W 100 W
N N N
160 160 160
500 W 500 W 500 W
7-16 7-16 7-16
161 161 161
154
Low-loss Power Splitters 790 – 960 MHz Indoor and outdoor use
2-way-Splitter 800/900 3-way-Splitter 800/900 4-way-Splitter 800/900 Type No.
K 63 20 62 1
K 63 20 62 7
K 63 20 63 1
K 63 20 63 7
K 63 20 64 1
K 63 20 64 7
N 500 W
7-16 1000 W
N 500 W
7-16 1000 W
N 500 W
7-16 1000 W
Connector (female) Max. power at 50 °C ambient temperature For connecting ... antennas Frequency range VSWR Impedance Insertion loss Weight Packing size Max. size
2
3 790 – 960 MHz < 1.1 50 Ω < 0.05 dB appr. 1.3 kg 240 x 93 x 107 mm 210 / 80 / 80 mm
Material:
Housing: Aluminum. Inner conductor: Brass.
Mounting:
Bracket for wall mounting included in the scope of supply: For pipe mast mounting use clamps listed below (order separately).
DC capability:
DC transmission between all terminations (suitable for remote power supply systems).
4
Input K 63 20 64 7
Clamps (order separately) Type No. 736 736 736 736 736
801 802 803 804 805
Description 1 1 1 1 1
clamp clamp clamp clamp clamp
Remarks Mast: Mast: Mast: Mast: Mast:
34 60 80 100 120
– – – – –
60 80 100 120 140
mm mm mm mm mm
diameter diameter diameter diameter diameter 736 805
155
Low-loss Power Splitters 1425 – 2000 MHz Indoor and outdoor use
2-way-Splitter 1400/1900 3-way-Splitter 1400/1900 4-way-Splitter 1400/1900 Type No. Connector (female) Max. power (at 50 °C ambient temperature) For connecting ... antennas Frequency range VSWR Impedance Insertion loss Weight Packing size Max. size
K 63 55 8
K 63 56 8
7-16 700 W
7-16 700 W
2
3 1425 – 2000 MHz < 1.1 50 Ω < 0.05 dB appr. 1.0 kg 185 x 93 x 107 mm 160 / 82 / 82 mm
Material:
Housing: Aluminum. Inner conductor: Brass.
Mounting:
Bracket for wall mounting included in the scope of supply. For pipe mast mounting use clamps listed below (order separately).
DC capability:
DC transmission between all terminations (suitable for remote power supply systems).
Input K 63 57 8
Clamps (order separately) Type No. 736 736 736 736 736
801 802 803 804 805
Description 1 1 1 1 1
clamp clamp clamp clamp clamp
Remarks Mast: Mast: Mast: Mast: Mast:
34 60 80 100 120
– – – – –
60 80 100 120 140
mm mm mm mm mm
diameter diameter diameter diameter diameter 736 805
156
Low-loss Power Splitters – Multi-band 800 – 2200 MHz Indoor and outdoor use
2-way-Splitter 800–2200 3-way-Splitter 800–2200 4-way-Splitter 800–2200 Type No. Connector (female) Max. power (at 50 °C ambient temperature) For connecting ... antennas Frequency range VSWR Impedance Insertion loss Weight Packing size Max. size
737 303
737 304
737 305
737 306
737 307
737 308
N 200 W
7-16 700 W
N 200 W
7-16 700 W
N 200 W
7-16 700 W
2
3 800 – 2200 MHz < 1.15 50 Ω < 0.05 dB appr. 1.5 kg 310 x 93 x 107 mm 294 / 82 / 82 mm
Material:
Housing: Aluminum. Inner conductor: Brass.
Mounting:
Bracket for wall mounting included in the scope of supply. For pipe mast mounting use clamps listed below (order separately).
DC capability:
DC transmission between all terminations (suitable for remote power supply systems).
4
Input 737 308
Clamps (order separately) Type No. 736 736 736 736 736
801 802 803 804 805
Description 1 1 1 1 1
clamp clamp clamp clamp clamp
Remarks Mast: Mast: Mast: Mast: Mast:
34 60 80 100 120
– – – – –
60 80 100 120 140
mm mm mm mm mm
diameter diameter diameter diameter diameter 736 805
157
Low-loss Power Splitters – Multi-band 800 – 2200 MHz Indoor use
2-way Splitter 800–2200 3-way Splitter 800–2200 4-way Splitter 800–2200 Type No. Connector Max. power For connecting ... antennas Frequency range VSWR Impedance Insertion loss Weight Profile cross-section Packing size Max. size
K 63 22 62 1
K 63 22 63 1
K 63 22 64 1
N female 100 W (at 50 °C ambient temperature) 2 3 4 800 – 2200 MHz < 1.25 < 1.25 < 1.3 50 Ω < 0.05 dB appr. 0.6 kg 25 x 25 mm 242 x 110 x 95 mm 204 / 63 / 41 mm
Material:
Housing: Aluminum. Inner conductor: Brass.
DC capability:
DC transmission between all terminations (suitable for remote power supply systems).
Input K 63 22 64 1
158
Low-loss Power Tappers 1710 – 2000 MHz Indoor and outdoor use
2-way-Tapper 1800/1900 4.8/1.8 dB 2-way-Tapper 1800/1900 6.0/1.2 dB 2-way-Tapper 1800/1900 7.0/1.0 dB Type No.
P2
737 965
Tap Loss Input ↔ P1 Input ↔ P2 Connectors Max. power For connecting ... antennas Phasedifference P1/P2 Frequency range VSWR Impedance Insertion loss Weight Packing size Max. size
737 966
737 967
– 1.8 dB – 4.8 dB
– 1.2 dB – 1.0 dB – 6.0 dB – 7.0 dB 7-16 female 700 Watt (at 50 °C ambient temperature) 2 g l = 35 mm 1710 – 2000 MHz < 1.1 50 Ω < 0.05 dB appr. 1.2 kg 240 x 93 x 107 mm 215 / 74 / 55 mm
Material:
Housing: Aluminum. Inner conductor: Brass.
Mounting:
Bracket for wall mounting included in the scope of supply. For pipe mast mounting use clamps listed below (order separately).
DC capability:
DC transmission between all terminations (suitable for remote power supply systems).
P1
Input 737 965
Clamps (order separately) Type No. 736 736 736 736 736
801 802 803 804 805
Description 1 1 1 1 1
clamp clamp clamp clamp clamp
Remarks 34 60 80 100 120
– – – – –
60 80 100 120 140
mm mm mm mm mm
diameter diameter diameter diameter diameter
736 805
159
Low-loss Power Tappers – Multi-band 800 – 2200 MHz Indoor use P1 2-way-Tapper 800–2200 7.0 /1.0dB 2-way-Tapper 800–2200 10.4/0.4dB 2-way-Tapper 800–2200 15.1/0.1dB
Tap Loss Input ↔ P1 Input ↔ P2 Connector Max. power For connecting ... antennas Frequency range VSWR Impedance Insertion loss Weight Profile cross-section Packing size Max. size
K 63 23 60 61
K 63 23 61 01 K 63 23 61 51
P2 – 1.0 dB – 7.0 dB
– 0.4 dB – 0.1 dB – 10.4 dB – 15.1 dB N female 100 W (at 50 °C ambient temperature) 2 800 – 2200 MHz < 1.5 50 Ω < 0.05 dB appr. 0.5 kg 25 x 25 mm 267 x 95 x 111 mm 244 / 64 / 25 mm
Material:
Housing: Aluminum. Inner conductor: Brass.
DC capability:
DC transmission only between input and port P1. P2 is coupled capacitively.
800 – 2200
Type No.
Input K 63 23 60 61
160
Low-loss Power Tappers – Multi-band 800 – 2200 MHz Indoor and outdoor use
2-way-Tapper 800–2200 7.0 /1.0dB 2-way-Tapper 800–2200 10.4/0.4dB 2-way-Tapper 800–2200 15.1/0.1dB Type No.
K 63 23 60 67
Tap Loss Input ↔ P1 Input ↔ P2 Connector Max. power For connecting ... antennas Frequency range VSWR Impedance Insertion loss Weight Max. size
P1 K 63 23 61 07 K 63 23 61 57
– 1.0 dB – 7.0 dB
– 0.4 dB – 0.1 dB – 10.4 dB – 15.1 dB 7-16 female 500 W (at 50 °C ambient temperature) 2 800 – 2200 MHz < 1.5 50 Ω < 0.05 dB appr. 1.3 kg 244 / 90 / 55 mm
Material:
Housing: Aluminum. Inner conductor: Brass.
DC capability:
DC transmission only between input and port P1. P2 is coupled capacitively.
Mounting:
Bracked for wall mounting included in the scope of supply. For pipe mast mounting use clamps listed below (order separately).
P2
Input K 63 23 60 67
Clamps (order separately) Type No. 736 736 736 736 736
801 802 803 804 805
Description 1 1 1 1 1
clamp clamp clamp clamp clamp
Remarks Mast: Mast: Mast: Mast: Mast:
34 60 80 100 120
– – – – –
60 80 100 120 140
mm mm mm mm mm
diameter diameter diameter diameter diameter 736 805
161
162
Accessories Mounting hardware and downtilt kits
163
Accessories
Page
Mounting Configurations
165
A-s / Eurocell s Dimensions
166
Three Sector Clamps and Masts
167
Clamps
168
Downtilt kits
170
F-s Dimensions
172
Detailed Connector Position
174
Clamps
175
Downtilt kits
177
Slant Compensation
179
Azimuth Adjustment Tools
180
Omnidirectional Antennas Clamp for larger Mast Diameters
182
Side-mounting Brackets
183
164
Mounting Configurations
Small Pipe Diameter
Large Pipe Diameter
Off-set
Flat Surface
Not applicable for Eurocell s with connector position rearside.
Standard Tilt
Off-set Tilt
165
A-s / Eurocell s Antenna Dimensions 72
A B C
256 mm 310 mm 350 mm
64 9
A-s with 65° and 90° Half-power Beam Width 656 mm 1296 mm 1936 mm 2580 mm 710 mm 1350 mm 1990 mm 2634 mm 750 mm 1390 mm 2030 mm 2674 mm
A Corresponds with the antenna height mentioned in the technical data.
A
B
C
B
C
Bottom view
+45°
-45°
116
58
262
72 9
64
Eurocell s A B C
264 mm –– ––
654 mm 974 mm 1294 mm 1934 mm 2254 mm 2574 mm 710 mm 1030 mm 1350 mm 1990 mm 2310 mm 2630 mm 750 mm 1070 mm 1390 mm 2030 mm 2350 mm 2670 mm
A Corresponds with the antenna height mentioned in the technical data.
A
103
Top view
258
166
A-s – 3 Sector Arrangement Mounting Hardware 3 Sector Clamp Kit / Pipe Mast with Flange Base Slim and unobstrusive design Nearly cylindrical optical appearance with small outer diameter ● Suitable for all A-s (Single-band, Dual-band) ● ●
3 Sector Clamp Kit Type No. Angle between antennas Suitable for mast diameter Type No. of pipe mast (please order separately) Number of pieces
742 033
742 034
120° 114.3 mm 742 035
120° 139.7 mm 742 036
2 x 3 sector clamp 2 x 3 sector clamp 2 x mounting 2 x mounting clamp clamp Material – 3 sector clamp Hot-dip galvanized steel Hot-dip galvanized steel – Mounting Aluminum Aluminum clamp – Screws Stainless steel Stainless steel Outer diameter (Dout) of the 3 A- Arrangement 460 mm 482 mm 64 ± 0.5
9 Dout E
B
60 °
3 sector clamp
F
C
A
Mounting clamp D
Torque 8 Nm Bottom view without downtilt kit
Type No. A B 742 033 114.3 88 742 034 139.7 100 all dimensions in mm
C 217 236
D 207 228
E 49 49
F 45 45 D
742 036
114.3 mm
139.7 mm
6.3 mm 4 mm 3000 mm 3000 mm 210 mm 265 mm 14 ± 1 mm 19 ± 1 mm 170 mm 225 mm 6 6 18 ± 1 mm 18 ± 1 mm M16 x 100 mm M16 x 100 mm Quality min. 8.8 Quality min. 8.8 60 kg 55 kg S355 J2H (St 52-3N) DIN EN 10210-1 S235 JR G2 (RSt 37-2) DIN EN 10025
Maximum permissible load: According DIN 4131 and DIN 4132 Fatigue class K2
129 ± 2
Pipe diameter D according DIN 2448 Wall thickness pipe Pipe length Flange diameter Flange thickness S Hole circle diameter Number of holes Hole diameter Enclosed bolts thread x length Hot-dip galvanized steel Weight Material pipe mast Material flange base
742 035
S
Type No.
3000
Pipe Mast with Flange Base
18±1
170 210
225 265
742 035
742 036
167
A-s 30° Half-power Beam Width Mounting Hardware A-s with 30° Half-power Beam Width A B
∅ 11
656 mm 1296 mm 2580 mm 584 mm 1224 mm 2504 mm
A
B
A Corresponds with the antenna height mentioned in the technical data.
177
116
Side view
180.5 348 560 Bottom view
Clamps Type No.
Description
733 736 K 61 14 03 K 61 14 04 K 61 14 05
2 2 2 2
clamps clamps clamps clamps
Remarks Mast: Mast: Mast: Mast:
50 – 125 mm diameter 116 – 210 mm diameter 210 – 380 mm diameter 380 – 521 mm diameter
Weight Units per appr. antenna 5.9 4.6 6.5 9.4
kg kg kg kg
1 1 1 1
Pair of clamps K 61 14 03
Downtilt kits Antenna height 656 mm 1296 mm 2580 mm
Downtilt angle
Type No.
Weight
0 – 33° 0 – 16° 0 – 8°
733 695
3.4 kg
Downtilt kit 733 695
168
A-s 65° and 90° / Eurocell s Mounting Hardware Clamps Eurocell s Antenna height: 2574 mm
10
3
8
25
Eurocell s Eurocell s Antenna height: 654 mm Antenna height: 264 mm 974 mm 1294 mm 1934 mm 2254 mm and all A-s 65° and 90° 10 3
10
3
8
25 8
25
26
4
65 9 4 1274 1994 2234 54
25
74
Mast diameter
Type No.
Distance A mm
Weight appr.
Units per antenna
Small Pipe
28 – 64 mm
731 651
22 – 30
330 g
see sketch
Large Pipe
50 – 115 mm
738 546
19 – 24
1.0 kg
see sketch
2.0 2.6 4.0 5.3
see see see see
Description
A
Off-set
60 – 115 mm 115 – 210 mm 210 – 380 mm 380 – 521 mm
731 651
733 733 733 733
677 678 679 680
738 546
117 – 124 146 – 160 148 – 168 150 – 175
kg kg kg kg
sketch sketch sketch sketch
733 678
169
A-s / Eurocell s Mounting Hardware Downtilt kit Antenna height:
654 974 1294 1934 2254
mm mm mm mm mm
Use the downtilt kit together with the clamps (see page 167 and 169)
Screws supplied
3
0
12 69
15
2
0
Scale
Downtilt kit with scale
Downtilt angle Antenna height
Downtilt angle
Type No.
654 mm
0° – 30°
737 972
974 mm
0° – 21°
737 973
1294 mm
0° – 16°
737 974
1934 mm
0° – 11°
737 975
2254 mm
0° – 9°
–
Downtilt kit without scale* Type No.
Weight
737 978
appr. 2.8 kg
* Instructions to adjust the required downtilt angle are given in the datasheet or on the rearside of the antenna.
Mounting a downtilt kit enlarges the spacing between mast and antenna by 84 mm.
170
A-s / Eurocell s Mounting Hardware Downtilt kits Suitable for: A-s with an antenna height of 2580 mm
Eurocell s with an antenna height of 2574 mm
Screws supplied Screws supplied
3
0
12 69
15
2
0 3
0
12 69
15
Scale
2
0
Scale
Type No. 737 971 Downtilt angle: 0° – 8°
Type No. 737 976 Downtilt angle: 0° – 8°
The downtilt kits should only be mounted with two clamps 738 546
171
F- Accessories Dimensions of F-s with 33° Half-power Beam Width Dimensions [mm] (‘A’ corresponds to the antenna height given on the data sheet)
Front view
C
209
263
303
342
396
436
662
716
756
982
1036
1076
1302
1356
1396
1942
1996
2036
A B C
64 72
Top view Radome depth 59 mm 59
B
9
A
262
172
F- Accessories Dimensions of F-s with 60° – 105° / 160° Half-power Beam Width Dimensions [mm] (‘A’ corresponds to the antenna height given on the data sheet)
Front view
A
B
C
182
236
266
342
396
426
502
556
586
662
716
746
702
756
786
982
1036
1066
1302
1356
1386
1622
1676
1706
1942
1996
2026
2582
2636
2666
A B C
ø 8.5 35 64
69
49
36
Top view Antenna with subreflector
155 155
142
155
Top view radome depth 69 mm 25
Top view radome depth 49 mm 25
Top view radome depth 36 mm
173
F- Accessories Dimensions of F-s Detailed connector position Vertical Polarization 60° – 65° Half-power Beam Width
90° – 160° Half-power Beam Width
76
33° Half-power Beam Width
+45°/–45° Polarization
52
65° Half-power Beam Width
58
90° Half-power Beam Width
174
F- Accessories Clamps for F-s with 33° / 60° – 160° Half-power Beam Width
33° HPBW
60°–160° HPBW
33° Half-power Beam Width Type No.
Mast diameter
Weight
Units per antenna
738 546
50 – 115 mm
appr. 1 kg
2
60°–160° Half-power Beam Width Type No.
734 734 734 734 734 734
Mast diameter
360 34 – 60 361 60 – 80 362 80 – 100 363 100 – 120 364 120 – 140 365 45 – 125
738 546
mm mm mm mm mm mm
Antenna height 182 182 182 182 182 182
… … … … … …
1942 1942 1942 1942 1942 1942
Weight
Units per appr. antenna
mm mm mm mm mm mm
50 – 115 mm 182 ... 2582 mm
60 g 70 g 80 g 90 g 110 g 80 g
1 1 1 1 1 1
1 kg
2
Type No. 734 362
Type No. 738 546
175
F- Accessories Mounting Hardware 2 x F- Mounting Kit For arranging two F-s 65°, 90° side by side (on air combining). ● The mounting kit consists of two mounting plates. ●
2 x F- Mounting Kit Type No.
742 113
No of units Suitable for F-s 65°, 90° with max. height of Material Weight Mounting
2 2m Hot-dip galvanized steel approx. 1.6 kg Screws are supplied 270 101
∅9
64±0.5
∅9
12 18
19
41
20 10
75
10
116
15 15
45°
64±0.5
Configuration without mechanical downtilt
Configuration with mechanical downtilt
03 6
9 12
15
2
0
m
10 m
Use the 2 x F- Mounting Kit together with the following mounting accessories Type No. Description 738 733 733 733 733 737
546 677 678 679 680 978
1 1 1 1 1 1
clamp offset clamp offset clamp offset clamp offset clamp downtilt kit
Remarks Mast: 50 – 115 mm diameter Mast: 60 – 115 mm diameter Mast: 115 – 210 mm diameter Mast: 210 – 380 mm diameter Mast: 380 – 521 mm diameter Downtilt angle: depending on antenna height
Weight Units per appr. antenna 1.0 2.0 2.6 4.0 5.3 2.8
kg kg kg kg kg kg
For a three sector arrangement, use the mounting kit type no. 742 113 together with the three sector clamp (see page 167).
2 2 2 2 2 1
176
F- Accessories Downtilt Kit for F-s with 33° – 160 °Half-power Beam Width Antenna height:
342 662 982 1302 1622 1942 2582
mm mm mm mm mm mm mm
Use the downtilt kit together with 2 clamps 738 546 (see page 175).
Screws supplied
3
0
12 69 15
2
0
Scale
Downtilt kit with scale Antenna height
Downtilt angle
Type No.
342 mm
0° – 54°
–
662 mm
0 °– 30°
737 972
982 mm
0° – 21°
737 973
1302 mm
0° – 16°
737 974
1622 mm
0° – 13°
–
1942 mm
0° – 11°
737 975
2582 mm
0° – 8°
737 971
Downtilt kit without scale* Type No.
Weight
737 978
appr. 2.8 kg
* Instructions to adjust the required downtilt angle are given in the datasheet or on the rearside of the antenna.
Mounting a downtilt kit enlarges the spacing between mast and antenna by 84 mm. 177
F- Accessories Downtilt Kit for F-s with 60° – 160° Half-power Beam Width Antenna height:
342 502 662 982 1302
mm mm mm mm mm
Use the downtilt kit together with the clamps (see page 175).
Screws supplied
86 10 4 2
0
Scale
Downtilt kit with scale Antenna height
Downtilt angle
Type No.
342 mm
0° – 40°
–
502 mm
0° – 25°
732 322
662 mm
0° – 20°
732 321
982 mm
0° – 14°
732 318
1302 mm
0° – 10°
732 317
Downtilt kit without scale* Type No.
Weight
732 327
appr. 1.0 kg
* Instructions to adjust the required downtilt angle are given in the datasheet or on the rearside of the antenna.
Mounting a downtilt kit enlarges the spacing between mast and antenna by 42 mm. 178
F- Accessories Slant Compensation Kit for F-s with 60° – 160° Half-power Beam Width Type No. 732 319
Use the slant compensation kit type no. 732 319 together with the clamps (see page 175).
57 mm
77 mm
Weight: appr. 200 g
179
F- Accessories Azimuth Adjustment Tool for F-s with 60° – 160° Half-power Beam Width Type No. 735 700
Precise azimuth angle adjustment for mast mounted antennas can easily be achieved by using the azimuth adjustment tool.
target object
scale
ele co vat mp ion en sa
tio
n
fixing screws
Instruction: – Use a map to work out the angle between the designed antenna azimuth direction and target object (church, building, mountain peak) – Set this angle on the scale of the adjustment tool – Push the adjustment tool onto the antenna fixture and tighten the fixing screws – Use the telescope to aim at the target object, if necessary, use elevation compensation – Then rotate the antenna until the target object appears in the telescope objective.
180
A- / Eurocell / F- Accessories Azimuth Adjustment Tool Type No. 738 440 Precise azimuth adjustment for mast mounted antennas can easily be achieved by using the azimuth adjustment tool. Elevation This tool is suitable to all types of Eurocell s compensation • s Target object • A-s 65°/ 90° • F-s • XPol F-s Target object
Scale
F-
A- Clamping device
F- F-
Target object
XPol F- Scale
* Move the stopper to central position XPol F-
Clamping device Instruction: – Use a map to work out the angle between the designed antenna azimuth and target (church, building, mountain peak). – Set this angle on the scale of the adjustment tool. – Place the adjustment tool onto the antenna and tighten the clamping device. – Use the telescope to aim at the target object, if necessary, use elevation compensation. – Then rotate the antenna until the target object appears in the telescope. * Observe the position of the stopper when fitting the azimuth adjustment tool. 181
Side-mounting Clamp Omnidirectional Antennas Large Pipe Type No. 738 908
For mast diameters of 94 – 125 mm
Antenna
Mast
b a
b
182
Side-mounting Bracket Omnidirectional Antennas ∅D
Type No. 737 398 Side-mounting bracket (for mast diameters of 40 – 105 mm) Type No.
737 398
Bracket
At the top and at the bottom
Fits for antenna type no:
900 MHz 736 347 736 348 736 349 736 350 736 351 738 664
A
1800 MHz 739 785 738 187 739 404 737 190
Side-mounting is possible for four fixed distances between the tubular mast and the antenna:
900 MHz A = 100 mm = 0.3 λ
1800 MHz
(holes 1 and 3)
A = 160 mm = 0.5 λ
A = 240 mm = 0.75 λ
A = 80 mm = 0.5 λ A
A
A
A
(hole 2)
bracket
antenna
antenna-base mast
bracket hole 3 D
Pipe D
hole 1 D
Horizontal Radiation Pattern
Spacing A Curve
hole 3
hole 2
D
Pipe D
D
Horizontal Radiation Pattern
100 mm
Spacing A Curve
Pipe D Curve
Horizontal Radiation Pattern
Spacing A
100 mm 40 mm 100 mm
160 mm dB
3
3
0
0
direction from mast to antenna
80 mm
240 mm
direction from mast to antenna
dB
160 mm dB
40 mm
3
100 mm 240 mm
0
direction from mast to antenna
183
Side-mounting Brackets Omnidirectional Antennas 900 For mast diameters of 40 – 105 mm
Type No. Bracket
Fits for antenna type no.
K 61 33 5
K 61 33 6
at the bottom only
at both the top and the bottom øD
K 75 11 6 .. K 75 15 6 ..
738 779 741 558
Side mounting is possible for three fixed distances between the tubular mast and the antenna: 100 mm = 0.3 λ 160 mm = 0.5 λ 240 mm = 0.75 λ
Pipe D
Horizontal Radiation Pattern
Spacing A Curve
Additional gain to the nominal value of the antenna gain A
100 mm 2 dB
160 mm 3 dB
dB
40 mm
3
240 mm 2 dB
0
direction from mast to antenna 100 mm 2.5 dB
160 mm 3.5 dB
dB
100 mm
3
240 mm 0
2.5 dB
K 61 33 6
direction from mast to antenna
184
185
Sales queries, orders, catalogues or CD-ROM: Fax: (++49)8031/184-820 E-Mail: [email protected]
Technical Information:
Subject to alteration. 9986.276/0101/8/ZW/HA
Please for:
Fax: (++49)8031/184-973 E-Mail: [email protected]
Internet: http://www.kathrein.de KATHREIN-Werke KG . Telephone (++49)8031/184-0 . Fax (++49)8031/184-991 Anton-Kathrein-Straße 1 – 3 . P.O. Box 10 04 44 . D-83004 Rosenheim .
Antennen . Electronic
Antennen . Electronic
Photo on title page: XPol- with cut through 3-dimensional farfield diagram of radiation pattern. Catalogue Issue 01/01 All data published in previous catalog issues hereby becomes invalid. We reserve the right to make alterations in accordance with the requirements of our customers.
Please note: As a result of more stringent legal regulations and judgements regarding product liability, we are obliged to point out certain risks that may arise when products are used under extraordinary operating conditions.
The mechanical design is based on the environmental conditions as stipulated in ETS 300 019-1-4, which include the static mechanical load imposed on an antenna by wind at maximum velocity. Extraordinary operating conditions, such as heavy icing or exceptional dynamic stress (e.g. strain caused by oscillating structures), may result in the breakage of an antenna or even cause it to fall to the ground. These facts must be considered during the site planning process.
The details given in our data sheets have to be followed carefully when installing the antennas and accessories. The installation team must be properly qualified and also be familiar with the relevant national safety regulations.
“Quality leads the way” Being the oldest and largest antenna manufacturer worldwide, we take on every day the challenge arising from our own motto. One of our basic principles is to look always for the best solution in order to satisfy our customers. Our quality assurance system conforms to DIN EN ISO 9001 and applies to the product range of the company: Antenna systems, communication products as well as active and ive distribution equipment.
2
XPol F-s harmonically adapted to existing decoration elements on a roof-top in Bavaria/.
3
Base Station Antennas for Mobile Communication Networks: GSM 900 NMT TACS AMPS CDMA GSM 1800 PCS DECT UMTS WLL
List of available catalogues for Mobile Communication Antennas and Accessories – 790 – 2200 MHz Base Station Antennas – 27 – 512 MHz Base Station Antennas
s logue a t a c sted The li re also M a D-RO C n o ble availa
– Ground-to-Air Communication Antennas – Antennas for Trains and Buses – 80 / 160 MHz Filters, Combiners, Amplifiers for Mobile Communication – 450 MHz Filters, Combiners, Amplifiers for Mobile Communication – 900 / 1800 MHz Filters, Combiners, Amplifiers for Mobile Communication
4
Kathrein Antennas Product Description (Type)
XXPol A- 900/1800 C 65°/60° 17.5/18dBi 2°–8°T/2°T
Polarization(s): (X) Dual +45°/ –45° (V) Vertical
Antenna Family
Frequency Range(s)
Integrated Combiner
Horizontal Half-power Beam Width(s)
Gain Value(s)
Fixed / Variable Electrical Tilt(s)
5
Summary of Types The articles are listed by type number in numerical order.
Type No.
Page
728 ...
Type No.
Page
733 ...
Type No.
Page
Type No.
Page
736 078
106
737 308
157
728 684
78
733 677
169 ...
736 347
129
737 385
99
728 685
77
733 678
169 ...
736 348
129
737 398
183
733 679
169 ...
736 349
132
737 547
86
733 680
169 ...
736 350
126
737 548
88
730 ... 730 360
82
733 695
77 ...
736 351
126
737 549
97
730 368
83
733 736
77 ...
736 352
131
737 735
84
730 370
91
736 361
144
737 849
102
730 374
99
734 ...
736 618
100
737 906
103
730 376
87
734 304
114
736 622
89
737 965
159
730 378
96
734 310
114
736 624
141
737 966
159
730 380
98
734 314
116
736 668
90
737 967
159
730 382
100
734 318
117
736 801
155 ...
737 971
171 ...
730 676
82
734 319
117
736 802
155 ...
737 972
170 ...
730 677
82
734 320
117
736 803
155 ...
737 973
170 ...
730 691
84
734 328
118
736 804
155 ...
737 974
170 ...
734 330
118
736 805
155 ...
737 975
170 ...
734 342
119
736 854
89
737 976
171
734 360
175
736 855
89
737 978
170 ...
734 361
175
736 858
90
734 362
175
736 863
93
738 ...
731 ... 731 651
169
732 ... 732 317
178
734 363
175
736 864
93
738 018
107
732 318
178
734 364
175
736 866
95
738 020
108
732 319
179
734 365
175
736 900
101
738 021
108
732 321
178
736 902
101
738 144
109
732 322
178
735 ...
736 935
143
738 187
135
732 327
178
735 141
115
738 192
128
732 433
87
735 147
116
737 ...
738 407
84
732 447
82
735 700
180
737 031
142
738 440
181
732 448
83
735 727
76
737 190
136
738 445
65
732 480
91
735 811
85
737 303
157
738 446
65 ...
732 689
88
737 304
157
738 449
133 ...
732 690
85
736 ...
737 305
157
738 450
123 ...
732 691
83
736 016
115
737 306
157
738 454
137 ...
732 967
91
736 077
104
737 307
157
738 546
169 ...
6
Summary of Types The articles are listed by type number in numerical order.
Type No.
Page
Type No.
Page
Type No.
Page
Type No.
738 573
146
739 643
20
741 493
103
K 63 ...
738 580
105
739 646
27
741 558
127
K 63 20 62 1
155
738 664
132
739 648
27
741 571
148
K 63 20 62 7
155
738 779
130
739 649
30
741 572
148
K 63 20 63 1
155
738 908
182
739 650
31
741 622
22
K 63 20 63 7
155
739 651
26
741 623
36
K 63 20 64 1
155
739 655
29
741 717
16
K 63 20 64 7
155
739 ...
Page
739 129
112
739 658
28
741 718
16
K 63 22 62 1
158
739 131
112
739 660
30
741 784
48 ...
K 63 22 63 1
158
739 134
113
739 662
31
741 785
17
K 63 22 64 1
158
739 136
113
739 695
43
741 790
138
K 63 23 60 61
160
739 404
135
739 698
44
741 794
41 ...
K 63 23 60 67
161
739 418
96
739 707
45
741 880
66
K 63 23 61 01
160
739 489
37 ...
739 708
45
741 987
46 ...
K 63 23 61 07
161
739 490
38
739 710
47
741 989
49 ...
K 63 23 61 51
160
739 491
38
739 785
134
K 63 23 61 57
161
739 494
39
739 854
86
K 63 55 8
156
739 495
40
739 856
100
742 033
167
K 63 56 8
156
739 496
40
739 927
36
742 034
167
739 498
42
739 990
81
742 035
167
K 73 ...
739 619
18
742 036
167
K 73 22 67
80
739 620
18
741 ...
742 047
64
K 73 45 64 7
79
739 622
19
741 067
94
742 113
176
739 623
21
741 214
44
742 149
147
739 624
24
741 264
39
742 150
92
K 75 11 61
124
739 630
23
741 316
52
742 151
62
K 75 11 67
124
739 632
19
741 320
54
742 152
63
K 75 15 64 1
125
739 633
20
741 322
56
K 75 15 64 7
125
739 634
21
741 324
58
K 61 ...
739 635
23
741 325
53
K 61 14 02
76
739 636
24
741 326
55
K 61 14 03
76 ...
739 637
25
741 327
57
K 61 14 04
76 ...
739 638
32
741 328
59
K 61 14 05
76 ...
739 639
33
741 336
60
K 61 33 5
184
739 640
34
741 344
61
K 61 33 6
184
742 ...
K 75 ...
7
Directional antenna designs: A-s The Advanced Antenna Technology for Cross Polarization
Compact design
Small size and elegant design characterize this new antenna familiy.
Closed fiberglass housing
The fiberglass housing totally covers the internal antenna components. The special design reduces the sealing areas to a minimum and guarantees the best weather protection.
Environmental influences
The design of Kathrein antennas is based on fundamental engineering knowledge and also on decades of practical experience, during which the various constructions and materials used have proved their outstanding reliability.
Environmental conditions
Kathrein cellular antennas are designed to operate under the environmental conditions as described in ETS 300 019-1-4 class 4.1 E. The antennas exceed this standard with regard to the following items: – Low temperature: – 55 °C – High temperature (dry): + 60 °C
Environmental tests
Kathrein antennas have ed environmental tests as recommended in ETS 300 019-2-4. The homogenous design of Kathrein’s antenna families use identical modules and materials. Extensive tests have been performed on typical samples and modules.
Long service life
According to our own experience, the outstanding mechanical characteristics of Kathrein antennas result in an antenna service life of over 15 years.
65° and 90° half-power beam width Large variety of gain values Electrical downtilt
The customer can choose from 65° and 90° half-power beam widths. Gain values from 7.5 dBi up to 18 dBi, and electrical downtilts of up to 12° are available.
Low intermodulation After many years of experience in the construction of antennas and after products (typically –150 dBc) intensive research into the effects of intermodulation, we have been able to optimize the material used for A-s (the given value refers to 3rd order products measured with 2 carriers of 20 W each). Broadband design
These antennas primarily cover the frequency range from 806 to 960 MHz, and are also used for Dual-band antennas. Therefore the variety of antennas used can be kept to a minimum.
Excellent grounding
The A-s are DC grounded according EN 50083-1. The inner conductors are DC grounded.
Multi-functional installation hardware
All models are equipped with 2 fixing points. The A-s can be wall mounted without any additional hardware. For mast mounting, stainless steel brackets and mechanical downtilt kits are available. To assist the installation technicians in aligning the antennas, an azimuth adjustment tool can be supplied (see Accessories).
8
Directional antenna designs: Eurocell s (s) The Approved Antenna Family for Vertical Polarization
Compact, elegant design
Small size and elegant design are the distinguishing features of this antenna family, characteristics which predestine these antennas for use in modern cellular networks.
Fiberglass radome
The grey fiberglass radomes of these antennas are very stable and extraordinarily stiff. They are resistant to ultraviolet radiation and can also be painted to match their surroundings.
Environmental influences
The design of Kathrein antennas is based on fundamental engineering knowledge and also on decades of practical experience, during which the various constructions and materials used have proved their outstanding reliability.
Environmental conditions
Kathrein cellular antennas are designed to operate under the environmental conditions as described in ETS 300 019-1-4 class 4.1 E. The antennas exceed this standard with regard to the following items: – Low temperature: – 55 °C – High temperature (dry): + 60 °C
Environmental tests
Kathrein antennas have ed environmental tests as recommended in ETS 300 019-2-4. The homogenous design of Kathrein’s antenna families use identical modules and materials. Extensive tests have been performed on typical samples and modules.
Long service life
According to our own experience, the outstanding mechanical characteristics of Kathrein antennas result in an antenna service life of over 15 years.
Large variety of half-power beam widths and gains
The customer can choose from more than 75 versions, e.g. different half-power beamwidths of 65°, 90°, 105°, 120° and 160°, gain values from 6.5 to 18.5 dBi and electrical downtilts of up to 15°.
Electrical downtilt
Low intermodulation After many years’ experience in the construction of antennas and after products (typically –150 dBc) intensive research into the effects of intermodulation, we have been able to optimize the material used for Eurocell s (the given value refers to 3rd order products measured with 2 carriers of 20 W each). Broadband design
2 groups of antennas are available for the frequency ranges: 870 – 960 MHz, optimized for GSM, 806 – 960 MHz, for other cellular networks.
Excellent grounding
The Eurocell s are DC grounded according EN 50083-1. The inner conductors are DC grounded for DC loop monitoring.
Multi-functional installation hardware
Depending on their length, the antennas are equipped with up to 3 fixing points. The Eurocell s can be wall mounted without any additional hardware. For mast mounting, stainless steel brackets and mechanical downtilt kits are available. To assist the installation technicians in aligning the antennas, an azimuth adjustment tool can be supplied (see Accessories).
9
Directional antenna designs: F-s Harmony of Design and Technology
Slim, unobtrusive design
This antenna family is especially suitable for installation at optically sensitive sites.
Flat fiberglass radome
The max. radome depth is only 69 mm. Fiberglass material guarantees optimum performance with regards to stability, stiffness, UV resistance and painting. The colour of the radome is grey.
Environmental influences
The design of Kathrein antennas is based on fundamental engineering knowledge and also on decades of practical experience, during which the various constructions and materials used have proved their outstanding reliability.
Environmental conditions
Kathrein cellular antennas are designed to operate under the environmental conditions as described in ETS 300 019-1-4 class 4.1 E. The antennas exceed this standard with regard to the following items: – Low temperature: – 55 °C – High temperature (dry): + 60 °C
Environmental tests
Kathrein antennas have ed environmental tests as recommended in ETS 300 019-2-4. The homogenous design of Kathrein’s antenna families use identical modules and materials. Extensive tests have been performed on typical samples and modules.
Long service life
According to our own experience, the outstanding mechanical characteristics of Kathrein antennas result in an antenna service life of over 15 years.
Patented, gain-optimized radiating system
The reduction of the number of components down to just a few multi-functional parts has reduced the number of electrical and mechanical connection points, thus also Low intermodulation reducing the intermodulation products (the indicated value products (typically –150 dBc) refers to 3rd order products measured with 2 carriers of 20 W each). Large variety of half-power beam widths and gains Electrical downtilt
Versions with half-power beam widths of 33° to 200° are available (with an additional subreflector). Various gain values of up to 22 dBi and electrical downtilt options will aid network planners to select the version most suitable for the intended purpose.
Excellent grounding
The F-s are DC grounded according EN 50083-1. The inner counductors are DC grounded for DC loop monitoring.
Multi-functional installation hardware
The F-s can be wall mounted without any additional hardware. For mast mounting, stainless steel brackets and mechanical downtilt kits are available. To assist the installation technicians in aligning the antennas, an azimuth adjustment tool can be supplied (see Accessories).
10
Directional antenna designs: Special Directional Antennas For Particular Applications
Antennas for – tunnel use – railway use – micro cells (street use) – high gain link for repeaters The distinguishing features of these special versions, e.g. parabolic s or log. periodic antennas, are: – very small half-power beam width (high gain) – high sidelobe suppression – also Dual-band and Multi-band versions – bidirectional horizontal pattern.
LogPer
Par
BiDir 11
12
Directional Antennas Dual Polarization + 45°/ – 45°
800/900 MHz
Dual Polarization + 45°/ – 45°, Adj. el. downtilt
800/900 MHz
Directional Antennas Dual Polarization + 45°/ – 45°
1800/1900/2000 MHz
Dual Polarization + 45°/ – 45°, Adj. el. downtilt
1800/1900/2000 MHz
Directional Antennas Dual-band, Dual Polarization + 45°/ – 45°
900/1800 MHz
Dual-band, Dual Polarization + 45°/ – 45°, Adj. el. downtilt 900/1800 MHz Dual-band, Vertical Polarization
800/900/1800/2000 MHz
Directional Antennas Dual Polarization + 45°/ – 45°
UMTS (IMT 2000)
Directional Antennas Vertical Polarization
800/900 MHz
Vertical Polarization, Adj. el. downtilt
800/900 MHz
Vertical Polarization, Multi-unit
900 MHz
Directional Antennas Vertical Polarization
1800/1900 MHz
Omnidirectional Antennas Vertical Polarization
800/900 MHz
Dual-band, Vertical Polarization
900/1800 MHz
Vertical Polarization
1800 MHz
Vertical Polarization
2000 MHz
Indoor Antennas Single-band
900/1800 MHz
Multi-band
800/1900/2000 MHz
Indoor / Outdoor
900/1800/2000 MHz
Power Splitters and Tappers Accessories 13
14
Summary – Directional Antennas Dual Polarization + 45°/ –45° 800/900 Dual Polarization + 45°/ –45° Type
Type No.
Frequency range [MHz]
Height [mm]
XPol A- XPol A- XPol A-
900 900 900
30° 30° 30°
15.5 dBi 18.5 dBi 21 dBi
741 717 741 718 741 785
870 – 960 870 – 960 870 – 960
656 1296 2580
XPol A-
806–960
65°
9 dBi
739 619
806 – 960
XPol A-
806–960
65°
12.5 dBi
739 620
806 – 960
XPol A- XPol A- XPol A- XPol A-
806–960 806–960 806–960 806–960
65° 65° 65° 65°
15.5 15 15 15
dBi dBi dBi dBi
6°T 9°T 12°T
739 739 739 739
622 632 643 633
806 806 806 806
– – – –
XPol A- XPol A- XPol A- XPol A-
806–960 806–960 824–960 900
65° 65° 65° 65°
17 17 17 17
dBi dBi dBi dBi
6°T 9°T 6°T
739 739 741 739
623 634 622 635
806 806 806 880
XPol A- XPol A- XPol A- XPol A-
900 806–960 806–960 806–960
65° 65° 65° 65°
18 18 18 18
dBi dBi dBi dBi
6°T 9°T
739 739 739 739
630 624 636 637
870 806 806 806
XPol A-
900
90°
7.5 dBi
XPol A-
806–960
90°
11 dBi
XPol A- XPol A-
806–960 806–960
90° 90°
13.5 dBi 13.5 dBi
XPol A- XPol A- XPol A-
900 806–960 806–960
90° 90° 90°
XPol A- XPol A-
806–960 806–960
90° 90°
Connector position
Page
bottom bottom bottom
16 16 17
256
bottom or top
18
656
bottom or top
18
960 960 960 960
1296 1296 1296 1296
bottom or top bottom bottom bottom
19 19 20 20
– – – –
960 960 960 960
1936 1936 1936 2256
bottom or top bottom bottom bottom
21 21 22 23
– – – –
960 960 960 960
2580 2580 2580 2580
bottom bottom bottom bottom
23 24 24 25
739 651
870 – 960
256
bottom or top
26
739 646
806 – 960
656
bottom or top
27
6°T
739 648 739 658
806 – 960 806 – 960
1296 1296
bottom or top bottom
27 28
15.5 dBi 15.5 dBi 15.5 dBi
6°T
739 655 739 649 739 660
870 – 960 806 – 960 806 – 960
1936 1936 1936
bottom or top bottom or top bottom
29 30 30
17 dBi 17 dBi
6°T
739 650 739 662
806 – 960 806 – 960
2580 2580
bottom or top bottom
31 31
824 – 960 824 – 960 806 – 960
1296 1996 2580
bottom bottom bottom
32 33 34
New Products
Dual Polarization + 45°/ –45° Adjustable Electrical Downtilt XPol A- XPol A- XPol A-
824–960 824–960 806–960
65° 65° 65°
15 dBi 16.5 dBi 17.5 dBi
2°–12°T 2°–10°T 0°– 17°T
739 638 739 639 739 640 New Products
15
A- Dual Polarization Half-power Beam Width
900 X 30°
XPol A- 900 30° 15.5dBi Type No.
741 717
Frequency range
870 – 960 MHz
Polarization
+45°, –45°
Gain
2 x 15.5 dBi
30°
Horizontal: Vertical:
Front-to-back ratio, copolar
> 30 dB
Isolation
> 30 dB
Impedance
50 Ω
VSWR
< 1.5
30° 27°
3
dB
10
Half-power beam width Copolar +45°/ –45°
0
Horizontal Pattern
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
500 Watt (at 50 °C ambient temperature)
27°
2 x 7-16 female
Connector position
10
Bottom 3
Weight
dB
Input
13 kg 0
Wind load
Frontal: 330 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
656 / 560 / 116 mm
Vertical Pattern
900 –45°
900 +45°
7-16
7-16
XPol A- 900 30° 18.5dBi Type No.
741 718
Frequency range
870 – 960 MHz
Polarization Gain
30°
+45°, –45° 2 x 18.5 dBi
Isolation Impedance VSWR
30° 15°
> 30 dB > 30 dB
< 1.5 < –150 dBc
Max. power per input
500 Watt (at 50 °C ambient temperature)
Connector position
0
Horizontal Pattern
50 Ω
Intermodulation IM3 (2 x 43 dBm carrier)
Input
3
15°
2 x 7-16 female
10
Bottom 3
Weight Wind load
20 kg Frontal: 680 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1296 / 560 / 116 mm
Mounting accessories are not included in the scope of delivery (see page 168)
dB
Front-to-back ratio, copolar
Horizontal: Vertical:
dB
10
Half-power beam width Copolar +45°/ –45°
0
Vertical Pattern
16
A- Dual Polarization Half-power Beam Width
900 X 30°
XPol A- 900 30° 21dBi Type No.
741 785
Frequency range
870 – 960 MHz
Polarization
+45°, –45°
Gain
2 x 21 dBi
30°
Front-to-back ratio, copolar
> 30 dB
Isolation
> 30 dB
Impedance
50 Ω
VSWR
< 1.5
30° 7°
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
400 Watt (at 50 °C ambient temperature)
Input Connector position
2 x 7-16 female
3 0
Horizontal Pattern
7° 10
Bottom 3
Weight
dB
Horizontal: Vertical:
dB
10
Half-power beam width Copolar +45°/ –45°
40 kg 0
Wind load
Frontal: 1460 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
2580 / 560 / 116 mm
Mounting accessories are not included in the scope of delivery (see page 168)
Vertical Pattern
900 –45°
900 +45°
7-16
7-16
17
A- Dual Polarization Half-power Beam Width
806 – 960 X 65°
XPol A- 806–960 65° 9dBi
739 619
Frequency range 806 – 880 MHz
880 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 8.5 dBi
2 x 9 dBi
Horizontal: Vertical:
Front-to-back ratio, copolar Cross polar ratio Maindirection Sector
0° ±60°
70° 70°
Horizontal: Vertical:
10
65° 68°
> 27 dB
> 27 dB
Typically: 25 dB > 10 dB
Typically: 25 dB > 10 dB
Isolation
0
Horizontal Pattern
> 30 dB
Impedance
50 Ω
VSWR
< 1.5
68°
10
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
350 Watt (at 50 °C ambient temperature)
3
Input
2 x 7-16 female
Connector position
0
Vertical Pattern
Bottom or top
Weight Wind load
3
dB
Half-power beam width Copolar +45°/ –45°
65°
125°
806–960
dB
Type No.
3 kg Frontal: 40 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
256 / 262 / 116 mm
800/900 –45°
800/900 +45°
7-16
7-16
XPol A- 806–960 65° 12.5dBi
739 620
Frequency range
120°
806–960 806 – 880 MHz
880 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 12 dBi
2 x 12.5 dBi
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
68° 29°
Horizontal: Vertical:
65° 27°
65°
10
3
dB
Type No.
0
Front-to-back ratio, copolar
> 30 dB
Isolation
> 30 dB
Impedance
50 Ω
VSWR
< 1.5
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
500 Watt (at 50 °C ambient temperature)
Connector position Weight Wind load
27°
10
2 x 7-16 female Bottom or top 6 kg Frontal: 110 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
656 / 262 / 116 mm
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
3
dB
Input
Horizontal Pattern
0
Vertical Pattern
18
A- Dual Polarization Half-power Beam Width
806 – 960 X 65°
XPol A- 806–960 65° 15.5dBi
739 622
Frequency range 806 – 880 MHz
880 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 15 dBi
2 x 15.5 dBi
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
65°
120°
806–960
68° 16°
Horizontal: Vertical:
65° 15°
10
3
dB
Type No.
0
Front-to-back ratio, copolar
> 30 dB
Isolation
> 30 dB
Horizontal Pattern
50 Ω
Impedance VSWR
< 1.4
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
600 Watt (at 50 °C ambient temperature)
Connector position
3
Bottom or top
Weight Wind load
10
2 x 7-16 female dB
Input
15°
0
10 kg
Vertical Pattern
Frontal: 230 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1296 / 262 / 116 mm 800/900 –45°
800/900 +45°
7-16
7-16
XPol A- 806–960 65° 15dBi 6°T
739 632
Frequency range
120°
806–960 806 – 880 MHz
880 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 14.5 dBi
2 x 15 dBi
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
68° 16°
Horizontal: Vertical:
65° 15°
65°
10
3
dB
Type No.
0
6°, fixed
6°, fixed
Sidelobe suppression for first sidelobe above horizon
≥ 14 dB
≥ 16 dB
Front-to-back ratio, copolar
> 28 dB
> 30 dB
Isolation
> 30 dB
> 32 dB
Impedance
50 Ω
50 Ω
VSWR
< 1.5
< 1.3
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
600 Watt (at 50 °C ambient temperature)
Input Connector position Weight Wind load
Horizontal Pattern
15°
10
3
2 x 7-16 female
dB
Electrical tilt
0
Vertical Pattern 6° electr. downtilt
Bottom 8 kg Frontal: 230 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1296 / 262 / 116 mm
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
19
A- Dual Polarization Half-power Beam Width
806 – 960 X 65°
XPol A- 806–960 65° 15dBi 9°T
739 643
Frequency range 806 – 880 MHz
880 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 14.5 dBi
2 x 15 dBi
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
68° 16°
65°
120°
806–960
Horizontal: Vertical:
65° 15°
10
3
dB
Type No.
0
9°, fixed
9°, fixed
Sidelobe suppression for first sidelobe above horizon
≥ 14 dB
≥ 16 dB
Front-to-back ratio, copolar
> 28 dB
> 30 dB
Isolation
> 30 dB
> 30 dB
Impedance
50 Ω
50 Ω
VSWR
< 1.5
< 1.3
Horizontal Pattern
15°
10
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
500 Watt (at 50 °C ambient temperature)
3
Input
Bottom
Weight Wind load
0
Vertical Pattern 9° electr. downtilt
2 x 7-16 female
Connector position
dB
Electrical tilt
8 kg Frontal: 230 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1296 / 262 / 116 mm
800/900 –45°
800/900 +45°
7-16
7-16
XPol A- 806–960 65° 15dBi 12°T
739 633
Frequency range
120°
806–960 806 – 880 MHz
880 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 14.5 dBi
2 x 15 dBi
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
68° 17°
Horizontal: Vertical:
65° 16°
65°
10
3
dB
Type No.
0
12°, fixed
12°, fixed
Sidelobe suppression for first sidelobe above horizon
≥ 14 dB
≥ 16 dB
Front-to-back ratio, copolar
> 28 dB
> 30 dB
Isolation
> 30 dB
> 30 dB
Impedance
50 Ω
50 Ω
VSWR
< 1.5
< 1.3
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
600 Watt (at 50 °C ambient temperature)
Input Connector position Weight Wind load
Horizontal Pattern
16° 10
3
2 x 7-16 female
dB
Electrical tilt
0
Vertical Pattern 12° electr. downtilt
Bottom 8 kg Frontal: 230 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1296 / 262 / 116 mm
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
20
A- Dual Polarization Half-power Beam Width
806 – 960 X 65°
XPol A- 806–960 65° 17dBi
739 623 806 – 880 MHz
880 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 16.5 dBi
2 x 17 dBi
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
68° 10°
Horizontal: 65° Vertical: 9.5°
Sidelobe suppression for first sidelobe above horizon
≥ 15 dB
Front-to-back ratio, copolar
> 30 dB
Isolation
> 30 dB
Impedance
50 Ω
VSWR
< 1.5
9.5°
Max. power per input
600 Watt (at 50 °C ambient temperature)
10
2 x 7-16 female
3 0
Bottom or top
Vertical Pattern
12 kg
first null-fill below horizon better or equal –25 dB below maximum gain
Weight Wind load
3 0
< –150 dBc
Connector position
10
Horizontal Pattern
Intermodulation IM3 (2 x 43 dBm carrier)
Input
65°
120°
806–960
dB
Frequency range
dB
Type No.
Frontal: 330 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1936 / 262 / 116 mm
800/900 –45°
800/900 +45°
7-16
7-16
XPol A- 806–960 65° 17dBi 6°T
739 634
Frequency range
120°
806–960 806 – 880 MHz
880 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 16.5 dBi
2 x 17 dBi
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
68° 10°
Horizontal: 65° Vertical: 6.5°
65°
10
3
dB
Type No.
0
6°, fixed
6°, fixed
Sidelobe suppression for first sidelobe above horizon
≥ 14 dB
≥18 dB
Front-to-back ratio, copolar
> 30 dB
> 30 dB
Isolation
> 32 dB
> 32 dB
Impedance
50 Ω
50 Ω
VSWR
< 1.5
< 1.3
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
600 Watt (at 50 °C ambient temperature)
Input Connector position Weight Wind load
Horizontal Pattern
9.5°
10
3
7-16 female
dB
Electrical tilt
0
Vertical Pattern 6° electr. downtilt
Bottom 12 kg Frontal: 330 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1936 / 262 / 116 mm
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
21
A- Dual Polarization Half-power Beam Width Fixed Electrical Downtilt
824 – 960 X 65° 9°
XPol A- 824–960 65° 17dBi 9°T
741 622
Frequency range 824 – 880 MHz
880 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 16.5 dBi
2 x 17 dBi
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
68° 10°
65°
120°
824–960
Horizontal: 65° Vertical: 9.5°
10
3
dB
Type No.
0
9°, fixed
9°, fixed
Sidelobe suppression for first sidelobe above horizon
≥ 14 dB
≥16 dB
Front-to-back ratio, copolar
> 30 dB
> 30 dB
Isolation
> 32 dB
> 32 dB
Impedance
50 Ω
50 Ω
VSWR
< 1.5
< 1.3
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
500 Watt (at 50 °C ambient temperature)
Input Connector position Weight Wind load
Horizontal Pattern
9.5°
10
3
2 x 7-16 female
dB
Electrical tilt
0
Vertical Pattern 9° electr. downtilt
Bottom 12 kg Frontal: 330 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1936 / 262 / 116 mm
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
800/900 –45°
800/900 +45°
7-16
7-16
22
A- Dual Polarization Half-power Beam Width
900 X 65°
XPol A- 900 65° 17dBi 6°T Type No.
739 635
Frequency range
880 – 960 MHz
Polarization
+45°, –45°
Gain
2 x 17 dBi
65°
120°
Horizontal: Vertical:
Electrical tilt
6°, fixed
Sidelobe suppression above horizon (0°– 40°)
≥ 20 dB
Front-to-back ratio, copolar
> 30 dB
Isolation
> 32 dB
Impedance
50 Ω
VSWR
< 1.3
65° 8.5°
3
dB
10
Half-power beam width Copolar +45°/ –45°
0
Horizontal Pattern
8.5°
< –150 dBc
Max. power per input
250 Watt (at 50 °C ambient temperature)
Input
2 x 7-16 female
Connector position
Bottom
Weight
10
3
dB
Intermodulation IM3 (2 x 43 dBm carrier)
0
Vertical Pattern 6° electr. downtilt
16 kg
Wind load
Frontal: 400 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
2256 / 262 / 116 mm
900 –45°
900 +45°
7-16
7-16
XPol A- 900 65° 18dBi Type No.
739 630
Frequency range
870 – 960 MHz
Polarization Gain
120°
65°
+45°, –45° 2 x 18 dBi Horizontal: Vertical:
Sidelobe suppression for first sidelobe above horizon
≥ 15 dB
Front-to-back ratio, copolar
> 30 dB
Isolation
> 32 dB
VSWR
50 Ω < 1.3 < –150 dBc
Max. power per input
600 Watt (at 50 °C ambient temperature)
Connector position Weight Wind load
0
Horizontal Pattern
Intermodulation IM3 (2 x 43 dBm carrier)
Input
3
7°
10
2 x 7-16 female Bottom or top 19 kg Frontal: 470 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
2580 / 262 / 116 mm
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
3
dB
Impedance
65° 7°
dB
10
Half-power beam width Copolar +45°/ –45°
0
Vertical Pattern first null-fill below horizon better or equal –25 dB below maximum gain
23
A- Dual Polarization Half-power Beam Width
806 – 960 X 65°
XPol A- 806–960 65° 18dBi
739 624
Frequency range 806 – 880 MHz
880 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 17.5 dBi
2 x 18 dBi
Half-power beam width Copolar +45°/ –45°
Horizontal: 68° Vertical: 7.5°
65°
120°
806–960
Horizontal: Vertical:
65° 7°
10
3
dB
Type No.
0
Front-to-back ratio, copolar
> 30 dB
Isolation
> 30 dB
> 30 dB
Horizontal Pattern
> 32 dB 50 Ω
Impedance VSWR
< 1.5
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
600 Watt (at 50 °C ambient temperature)
7°
Connector position
3
Bottom or top
Weight Wind load
10
2 x 7-16 female dB
Input
0
19 kg
Vertical Pattern
Frontal: 470 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
2580 / 262 / 116 mm 800/900 –45°
800/900 +45°
7-16
7-16
XPol A- 806–960 65° 18dBi 6°T
739 636
Frequency range
120°
806–960 806 – 880 MHz
880 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 17.5 dBi
2 x 18 dBi
Half-power beam width Copolar +45°/ –45°
Horizontal: 68° Vertical: 7.5°
Horizontal: Vertical:
65° 7°
65°
10
3
dB
Type No.
0
Electrical tilt
6°, fixed
Sidelobe suppression for first sidelobe above horizon
≥ 18 dB
Front-to-back ratio, copolar
> 30 dB
Isolation
> 32 dB 50 Ω < 1.5
7°
< 1.3
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
500 Watt (at 50 °C ambient temperature)
Input Connector position Weight Wind load
10
3
2 x 7-16 female
dB
Impedance VSWR
Horizontal Pattern
0
Vertical Pattern 6° electr. downtilt
Bottom 19 kg Frontal: 470 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
2580 / 262 / 116 mm
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
24
A- Dual Polarization Half-power Beam Width Fixed Electrical Downtilt
806 – 960 X 65° 9°
XPol A- 806–960 65° 18dBi 9°T
739 637
Frequency range 806 – 870 MHz
870 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 17.5 dBi
2 x 18 dBi
Half-power beam width Copolar +45°/ –45°
65°
120°
806–960
Horizontal: Vertical:
65° 7.5°
10
3
dB
Type No.
0
Electrical tilt
better 18 dB below maximum gain
Front-to-back ratio, copolar
> 30 dB
Isolation
> 32 dB 50 Ω
Impedance VSWR
Horizontal Pattern
< 1.5
7.5°
< 1.3
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
500 Watt (at 50 °C ambient temperature)
Input Connector position Weight Wind load
10
3
2 x 7-16 female
dB
Sidelobe suppression for first sidelobe above horizon
9°, fixed
0
Vertical Pattern 9° electr. downtilt
Bottom 19 kg Frontal: 470 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
2580 / 262 / 116 mm
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
800/900 –45°
800/900 +45°
7-16
7-16
25
A- Dual Polarization Half-power Beam Width
900 X 90°
XPol A- 900 90° 7.5dBi
870 – 960 MHz
Polarization
+45°, –45°
Gain
2 x 7.5 dBi
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
Front-to-back ratio, copolar
> 20 dB
Isolation
> 30 dB
Impedance
50 Ω
VSWR
< 1.3
90° 70°
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
300 Watt (at 50 °C ambient temperature)
Input Connector position
2 x 7-16 female
90° 180°
3 0
Horizontal Pattern
70°
10
Bottom or top 3
Weight
dB
Frequency range
739 651
dB
Type No.
3 kg 0
Wind load
Frontal: 40 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
256 / 262 / 116 mm
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
Vertical Pattern
900 –45°
900 +45°
7-16
7-16
26
A- Dual Polarization Half-power Beam Width
806 – 960 X 90°
XPol A- 806–960 90° 11dBi
739 646
90° 170°
806–960 806 – 880 MHz
880 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 10.5 dBi
2 x 11 dBi
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
90° 38°
Horizontal: Vertical:
Sidelobe suppression for first sidelobe above horizon
≥ 16 dB
Front-to-back ratio, copolar
> 20 dB
Isolation
> 30 dB
Impedance
50 Ω
VSWR
< 1.5
90° 36°
36°
< –150 dBc
Max. power per input
500 Watt (at 50 °C ambient temperature)
3 0
Vertical Pattern
Bottom or top
Weight Wind load
10
2 x 7-16 female
Connector position
0
Horizontal Pattern
Intermodulation IM3 (2 x 43 dBm carrier)
Input
3
dB
Frequency range
dB
Type No.
6 kg Frontal: 110 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
656 / 262 / 116 mm
800/900 –45°
800/900 +45°
7-16
7-16
XPol A- 806–960 90° 13.5dBi
739 648
90° 170°
806–960 806 – 880 MHz
880 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 13 dBi
2 x 13.5 dBi
Half-power beam width Copolar +45°/ –45° Sidelobe suppression for first sidelobe above horizon
Horizontal: Vertical:
90° 16°
Horizontal: Vertical:
90° 15°
≥ 16 dB
Front-to-back ratio, copolar
> 25 dB
Isolation
> 32 dB
Impedance
50 Ω
VSWR
< 1.5
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
600 Watt (at 50 °C ambient temperature)
Input Connector position Weight Wind load
2 x 7-16 female Bottom or top
3
dB
Frequency range
0
Horizontal Pattern
15°
10
3
dB
Type No.
0
Vertical Pattern
10 kg Frontal: 230 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1296 / 262 / 116 mm
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
27
A- Dual Polarization Half-power Beam Width Fixed Electrical Downtilt
806 – 960 X 90° 6°
XPol A- 806–960 90° 13.5dBi 6°T
739 658
Frequency range
90° 170°
806–960 806 – 880 MHz
880 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 13 dBi
2 x 13.5 dBi
Horizontal: Vertical:
90° 16°
Horizontal: Vertical:
Electrical tilt
6°, fixed
Sidelobe suppression for first sidelobe above horizon
≥ 15 dB
Front-to-back ratio, copolar
> 25 dB
Isolation
> 30 dB
< 1.5
15°
< 1.3 < –150 dBc
Max. power per input
500 Watt (at 50 °C ambient temperature)
Connector position Weight Wind load
0
Horizontal Pattern
Intermodulation IM3 (2 x 43 dBm carrier)
Input
3
50 Ω
Impedance VSWR
90° 15°
10
3
2 x 7-16 female
dB
Half-power beam width Copolar +45°/ –45°
dB
Type No.
0
Vertical Pattern 6° electr. downtilt
Bottom 8 kg Frontal: 230 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1296 / 262 / 116 mm
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
800/900 –45°
800/900 +45°
7-16
7-16
28
A- Dual Polarization Half-power Beam Width
900 X 90°
XPol A- 900 90° 15.5dBi
739 655
Frequency range
870 – 960 MHz
Polarization
+45°, –45°
Gain
2 x 15.5 dBi
Half-power beam width Copolar +45°/ –45° Sidelobe suppression for first sidelobe above horizon
Horizontal: Vertical:
90° 10°
≥ 15 dB
90° 170°
3
dB
Type No.
0
Horizontal Pattern
Front-to-back ratio, copolar
> 25 dB
Isolation
> 32 dB
Impedance
50 Ω
VSWR
< 1.3 10°
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
600 Watt (at 50 °C ambient temperature)
Input Connector position Weight Wind load
2 x 7-16 female Bottom or top 14 kg Frontal: 330 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1936 / 262 / 116 mm
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
3
dB
10
0
Vertical Pattern first null-fill below horizon better or equal –25 dB below maximum gain
900 –45°
900 +45°
7-16
7-16
29
A- Dual Polarization Half-power Beam Width
806 – 960 X 90°
XPol A- 806–960 90° 15.5dBi
739 649
90° 170°
806–960 806 – 880 MHz
880 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 15 dBi
2 x 15.5 dBi
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
90° 10°
Horizontal: 90° Vertical: 9.5°
Sidelobe suppression for first sidelobe above horizon
≥ 14 dB
Front-to-back ratio, copolar
> 25 dB
Isolation
> 32 dB
Impedance
50 Ω
VSWR
< 1.5
9.5°
< –150 dBc
Max. power per input
600 Watt (at 50 °C ambient temperature)
3 0
Bottom or top
Vertical Pattern
12 kg
first null-fill below horizon better or equal –25 dB below maximum gain
Weight Wind load
10
2 x 7-16 female
Connector position
0
Horizontal Pattern
Intermodulation IM3 (2 x 43 dBm carrier)
Input
3
dB
Frequency range
dB
Type No.
Frontal: 330 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1936 / 262 / 116 mm
800/900 –45°
800/900 +45°
7-16
7-16
XPol A- 806–960 90° 15.5dBi 6°T
739 660
Frequency range
90° 170°
806–960 806 – 880 MHz
880 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 15 dBi
2 x 15.5 dBi
Horizontal: Vertical:
90° 10°
Horizontal: 90° Vertical: 9.5°
Electrical tilt
6°, fixed
Sidelobe suppression for first sidelobe above horizon
≥ 16 dB
Front-to-back ratio, copolar
> 25 dB
Isolation
> 32 dB
< 1.5
9.5°
< 1.3
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
600 Watt (at 50 °C ambient temperature)
Input Connector position Weight Wind load
0
Horizontal Pattern
50 Ω
Impedance VSWR
3
10
3
2 x 7-16 female
dB
Half-power beam width Copolar +45°/ –45°
dB
Type No.
0
Vertical Pattern 6° electr. downtilt
Bottom 14 kg Frontal: 330 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1936 / 262 / 116 mm
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
30
A- Dual Polarization Half-power Beam Width
806 – 960 X 90°
XPol A- 806–960 90° 17dBi
739 650
90° 170°
806–960 806 – 880 MHz
880 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 16.5 dBi
2 x 17 dBi
Half-power beam width Copolar +45°/ –45°
Horizontal: 90° Vertical: 7.5°
Horizontal: Vertical:
Sidelobe suppression for first sidelobe above horizon
≥ 15 dB
Front-to-back ratio, copolar
> 25 dB
Isolation
> 32 dB
Impedance
50 Ω
VSWR
< 1.5
90° 7°
7°
< –150 dBc
Max. power per input
600 Watt (at 50 °C ambient temperature)
3 0
Bottom or top
Vertical Pattern
19 kg
first null-fill below horizon better or equal –25 dB below maximum gain
Weight Wind load
10
2 x 7-16 female
Connector position
0
Horizontal Pattern
Intermodulation IM3 (2 x 43 dBm carrier)
Input
3
dB
Frequency range
dB
Type No.
Frontal: 470 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
2580 / 262 / 116 mm
800/900 –45°
800/900 +45°
7-16
7-16
XPol A- 806–960 90° 17dBi 6°T
739 662
Frequency range
90° 170°
806–960 806 – 880 MHz
880 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 16.5 dBi
2 x 17 dBi
Horizontal: 90° Vertical: 7.5°
Horizontal: Vertical:
Electrical tilt
6°, fixed
Sidelobe suppression for first sidelobe above horizon
≥ 16 dB
Front-to-back ratio, copolar
> 25 dB
Isolation
> 32 dB
< 1.5
7°
< 1.3 < –150 dBc
Max. power per input
600 Watt (at 50 °C ambient temperature)
Connector position Weight Wind load
0
Horizontal Pattern
Intermodulation IM3 (2 x 43 dBm carrier)
Input
3
50 Ω
Impedance VSWR
90° 7°
10
3
2 x 7-16 female
dB
Half-power beam width Copolar +45°/ –45°
dB
Type No.
0
Vertical Pattern 6° electr. downtilt
Bottom 19 kg Frontal: 470 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
2580 / 262 / 116 mm
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
31
A- Dual Polarization Half-power Beam Width Adjust. Electr. Downtilt
824– 960 X 65° 2°– 12°
XPol A- 824–960 65° 15dBi 2°–12°T
739 638
Type No. Frequency range
824–960
Polarization Gain Half-power beam width Copolar +45°/ –45° Electrical tilt Sidelobe suppression for first sidelobe above horizon Front-to-back ratio, copolar Cross polar ratio Maindirection Sector
0° ±60°
Isolation
824 – 880 MHz
880 – 960 MHz
+45°, –45°
+45°, –45°
14.5 dBi
15 dBi
Horizontal: 68° Vertical: 15.5°
Horizontal: 65° Vertical: 14.5°
2°–12°, adjustable
2°–12°, adjustable
2° ... 6° ... 10° ... 12° T 2° ... 6° ... 10° ... 12° T 16 ... 14 ... 11 ... 10 dB 20 ... 20 ... 16 ... 14 dB > 25 dB
> 25 dB
Typically: 25 dB > 10 dB
Typically: 25 dB > 10 dB > 32 dB
Impedance
50 Ω
VSWR
< 1.5
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
400 Watt (at 50 °C ambient temperature)
880 – 960 MHz: +45°/ –45° Polarization
125°
65° 14.5°
800/900 +45°
7-16
7-16
dB
3
dB
10
10 3
800/900 –45°
0 0
Horizontal Pattern
Vertical Pattern 2°– 12° electrical downtilt continously adjustable
Mechanical specifications Input
Adjustment mechanism 130°
68°
Bottom 1x, Position bottom continously adjustable
Weight 15.5°
Wind load
12 kg Frontal: Lateral: Rearside:
230 N (at 150 km/h) 130 N (at 150 km/h) 500 N (at 150 km/h)
10
10
3
dB
dB
Max. wind velocity 3
2 x 7-16 female
Connector position
824 – 880 MHz: +45°/ –45° Polarization
0 0
Horizontal Pattern
200 km/h
Packing size
1422 x 287 x 165 mm
Height/width/depth
1296 / 262 / 116 mm
Vertical Pattern 2°– 12° electrical downtilt continously adjustable
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
32
A- Dual Polarization Half-power Beam Width Adjust. Electr. Downtilt
824 – 960 X 65° 2°– 10°
XPol A- 824–960 65° 16.5dBi 2°–10°T
739 639
Type No. Frequency range
824–960 824 – 880 MHz
880 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 16 dBi
2 x 16.5 dBi
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
Electrical tilt
68° 10°
Horizontal: 65° Vertical: 9.5°
2°–10°, adjustable
Sidelobe suppression for first sidelobe above horizon Front-to-back ratio, copolar Cross polar ratio Maindirection Sector
0° ±60°
Isolation
2°–10°, adjustable
2° ... 5° ... 8° ... 10° T 2° ... 5° ... 8° ... 10° T 20 ... 16 ... 14 ... 13 dB 20 ... 18 ... 16 ... 14 dB > 25 dB
> 25 dB
Typically: 25 dB > 10 dB
Typically: 25 dB > 10 dB > 32 dB
Impedance
50 Ω
VSWR
< 1.5
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
400 Watt (at 50 °C ambient temperature)
880 – 960 MHz: +45°/ –45° Polarization
125°
65° 9.5°
824 – 960 +45°
7-16
7-16
dB
3
dB
10
10 3
824 – 960 –45°
0 0
Horizontal Pattern
Vertical Pattern 2°– 10° electrical downtilt continously adjustable
Mechanical specifications Input
Adjustment mechanism 130°
68°
Bottom 1x, Position bottom continously adjustable
Weight 10°
Wind load
17 kg Frontal: Lateral: Rearside:
330 N (at 150 km/h) 200 N (at 150 km/h) 770 N (at 150 km/h)
10
10
3
dB
dB
Max. wind velocity 3
2 x 7-16 female
Connector position
824 – 880 MHz: +45°/ –45° Polarization
0 0
Horizontal Pattern
200 km/h
Packing size
2122 x 287 x 165 mm
Height/width/depth
1996 / 262 / 116 mm
Vertical Pattern 2°– 10° electrical downtilt continously adjustable
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
33
A- Dual Polarization Half-power Beam Width Adjust. Electr. Downtilt
806 – 960 X 65° 0° – 7°
XPol A- 806–960 65° 17.5dBi 0°–7°T
739 640
Type No. Frequency range
806–960 806 – 880 MHz
880 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 17 dBi
2 x 17.5 dBi
Half-power beam width Copolar +45°/ –45° Electrical tilt Sidelobe suppression for first sidelobe above horizon Front-to-back ratio, copolar Cross polar ratio Maindirection Sector
0° ±60°
Isolation
Horizontal: 68° Vertical: 7.5°
Horizontal: Vertical:
65° 7°
0° – 7°, adjustable
0° – 7°, adjustable
0° ... 2° ... 4° ... 7° T 0° ... 2° ... 4° ... 7° T 17 ... 17 ... 17 ... 17 dB 20 ... 18 ... 18 ... 18 dB > 25 dB
> 25 dB
Typically: 25 dB > 10 dB
Typically: 25 dB > 10 dB > 32 dB
Impedance
50 Ω
VSWR
< 1.5
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
400 Watt (at 50 °C ambient temperature)
880 – 960 MHz: +45°/ –45° Polarization
125°
65° 7°
806 – 960 +45°
7-16
7-16
dB
3
dB
10
10 3
806 – 960 –45°
0 0
Horizontal Pattern
Vertical Pattern 0° – 7° electrical downtilt continously adjustable
Mechanical specifications Input Connector position
806 – 880 MHz: +45°/ –45° Polarization
Adjustment mechanism 130°
68°
Weight 7.5°
Wind load
Bottom 1x, Position bottom continously adjustable 22 kg Frontal: 470 N (at 150 km/h) Lateral: 280 N (at 150 km/h) Rearside: 1040 N (at 150 km/h)
10
10
3
dB
dB
Max. wind velocity 3
2 x 7-16 female
0 0
Horizontal Pattern
200 km/h
Packing size
2692 x 287 x 165 mm
Height/width/depth
2580 / 262 / 116 mm
Vertical Pattern 0° – 7° electrical downtilt continously adjustable
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
34
Summary – Directional Antennas Dual Polarization + 45°/ –45° 1800/1900/2000 Dual Polarization + 45°/ –45° – 1800/1900/2000 Type
Type No.
Frequency range [MHz]
Height [mm]
Connector position
Page
XPol F- 1800
33°
19.5 dBi
2°T
739 927
1710 – 1880
982
bottom
36
XPol F- 1800
33°
22 dBi
2°T
741 623
1710 – 1880
1942
bottom
36
XPol F- 1710–2170
65°
12 dBi
2°T
739 489
1710 – 2170
342
bottom
37
XPol F- 1800 XPol F- 1800 XPol F- 1800
65° 65° 65°
15.5 dBi 15.5 dBi 15 dBi
6°T 12°T
739 490 739 491 741 264
1710 – 1880 1710 – 1880 1710 – 1880
662 662 662
bottom or top bottom bottom
38 38 39
XPol F- 1800 XPol F- 1710–1990 XPol F- 1710–1990
65° 65° 65°
18 dBi 18 dBi 18 dBi
2°T 6°T
739 494 739 495 739 496
1710 – 1880 1710 – 1990 1710 – 1990
1302 1302 1302
bottom or top bottom bottom
39 40 40
XPol F- 1710–2170
65°
18.5 dBi
2°T
741 794
1710 – 2170
1302
bottom
41
XPol F- 1710–1990
65°
19.5 dBi
2°T
739 498
1710 – 1990
1942
bottom
42
XPol F- 1710–1990
90°
8 dBi
739 695
1710 – 1990
174
bottom or top
43
XPol F- 1800 XPol F- 1800
90° 90°
14 dBi 14 dBi
4°T
739 698 741 214
1710 – 1880 1710 – 1880
702 702
bottom or top bottom
44 44
XPol F- 1800 XPol F- 1800
90° 90°
16.5 dBi 16.5 dBi
2°T 6°T
739 707 739 708
1710 – 1880 1710 – 1880
1302 1302
bottom bottom
45 45
XPol F- 1710–2170
85°
17 dBi
2°T
741 987
1710–2170
1302
bottom
46
XPol F- 1800
90°
17.5 dBi
2°T
739 710
1710 – 1880
1902
bottom
47
Versions with connector position “Top” on request New Products
Dual Polarization + 45°/ –45° – 1800/1900/2000 Adjustable Electrical Downtilt XPol F- 1710–2170
65°
18 dBi
0°–8°T
741 784
1710 – 2170
1302
bottom
48
XPol F- 1710–2170
85°
17 dBi
2°–8°T
741 989
1710 – 2170
1302
bottom
49
New Products
35
F- Dual Polarization Half-power Beam Width Fixed Electrical Downtilt
1800 X 33° 2°
XPol F- 1800 33° 19.5dBi 2°T
739 927
Type No. Frequency range
1710 – 1880 MHz
Polarization
+45°, –45°
Gain
2 x 19.5 dBi
33°
+45° Horizontal: Vertical:
–45° Horizontal: Vertical:
33° 9°
33° 9°
3
dB
10
Half-power beam width Copolar
0
Electrical tilt
Horizontal Pattern
above horizon for first sidelobe better or equal 14 dB below maximum gain
Front-to-back ratio, copolar
> 30 dB
Isolation
> 30 dB
Impedance
50 Ω
VSWR
< 1.5
9°
10
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
200 Watt (at 50 °C ambient temperature)
3
Input
0
2 x 7-16 female
Vertical Pattern
Bottom
– 2° electr. downtilt – first null-fill below horizon better or equal –25 dB below maximum gain
Connector position Weight Wind load
dB
Sidelobe suppression
2°, fixed
7 kg Frontal: 260 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
982 / 262 / 59 mm
1800 –45°
1800 +45°
7-16
7-16
XPol F- 1800 33° 22dBi 2°T
741 623
Type No. Frequency range
1710 – 1880 MHz
Polarization
33°
+45°, –45°
Gain
2 x 22 dBi +45° Horizontal: Vertical:
–45° Horizontal: Vertical:
33° 5°
33° 5°
3
dB
10
Half-power beam width Copolar
0
Sidelobe suppression
2°, fixed above horizon for first sidelobe better or equal 14 dB below maximum gain
Front-to-back ratio, copolar
> 30 dB
Isolation
> 30 dB
Impedance VSWR
50 Ω < 1.5
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
200 Watt (at 50 °C ambient temperature)
Input Connector position Weight Wind load
Horizontal Pattern
5° 10
3
2 x 7-16 female
dB
Electrical tilt
0
Vertical Pattern 2° electrical downtilt
Bottom 11 kg Frontal: 540 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1942 / 262 / 59 mm
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
36
Multi-band F- Dual Polarization Half-power Beam Width Fixed Electrical Downtilt
1710 –2170 X 65° 2°
XPol F- 1710–2170 65° 12dBi 2°T
739 489
Type No. Frequency range 1710 – 1880 MHz
1710–2170 1850 – 1990 MHz
1920 – 2170 MHz
Polarization
+45°, –45°
+45°, –45°
+45°, –45°
Gain
2 x 11.5 dBi
2 x 12 dBi
2 x 12 dBi
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
Electrical tilt Gain-reduction in horizon Front-to-back ratio, copolar Cross polar ratio Maindirection Sector
0° ±60°
67° 32°
Horizontal: Vertical:
65° 30°
Horizontal: Vertical:
63° 28°
5°, fixed
4°, fixed
2°, fixed
typ. 0.3 dB
typ. 0.2 dB
typ. 0.1 dB
> 30 dB
> 30 dB
> 30 dB
Typically: 20 dB > 10 dB
Typically: 20 dB > 10 dB
Typically: 20 dB > 10 dB
Isolation, between ports
> 30 dB
Impedance
50 Ω
VSWR
< 1.4
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
150 Watt (at 50 °C ambient temperature)
1710 – 1880 MHz: +45°/ –45° Polarization 125°
67°
32° 10
3
dB
3
dB
10
0 0
Horizontal Pattern
Vertical Pattern 5° electr. downtilt
1850 – 1990 MHz: +45°/ –45° Polarization 120°
65°
1710 – 2170 –45°
1710 – 2170 +45°
7-16
7-16
30°
dB
3
3
dB
10
10
Mechanical specifications
0
0
Horizontal Pattern
Vertical Pattern 4° electr. downtilt
Input
2 x 7-16 female
Connector position
1920 – 2170 MHz: +45°/ –45° Polarization
Weight Wind load
115°
63° 28°
Max. wind velocity dB
3 0
Horizontal Pattern
3
dB
10
10
Bottom 2 kg Frontal: Lateral: Rearside:
35 N (at 150 km/h) 25 N (at 150 km/h) 80 N (at 150 km/h) 200 km/h
Packing size
444 x 172 x 92 mm
Height/width/depth
342 / 155 / 69 mm
0
Vertical Pattern 2° electr. downtilt
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
37
F- Dual Polarization Half-power Beam Width
1800 X 65°
XPol F- 1800 65° 15.5dBi
739 490
Type No. Frequency range Polarization
+45°, –45°
Gain
2 x 15.5 dBi
65°
120°
1710 – 1880 MHz
Horizontal: Vertical:
Front-to-back ratio, copolar
> 30 dB
Isolation, between ports
> 30 dB
Impedance
50 Ω
VSWR
< 1.5
65° 13°
3
dB
10
Half-power beam width Copolar +45°/ –45°
0
Horizontal Pattern
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
200 Watt (at 50 °C ambient temperature)
13°
2 x 7-16 female
Connector position
10
Bottom or top 3
Weight
dB
Input
3.5 kg 0
Wind load
Frontal: 150 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
662 / 155 / 49 mm
Vertical Pattern
1800 –45°
1800 +45°
7-16
7-16
XPol F- 1800 65° 15.5dBi 6°T Type No. Frequency range Polarization Gain
739 491 120°
1710 – 1880 MHz
65°
+45°, –45° 2 x 15.5 dBi 65° 14°
6°, fixed
Front-to-back ratio, copolar
> 30 dB
Isolation, between ports
> 30 dB
Impedance
50 Ω
VSWR
< 1.5
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
200 Watt (at 50 °C ambient temperature)
Input
3 0
Horizontal Pattern
14°
10
2 x 7-16 female 3
Connector position
Bottom
Weight
3.5 kg
Wind load
Frontal: 150 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
662 / 155 / 49 mm
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
dB
Electrical tilt
Horizontal: Vertical:
dB
10
Half-power beam width Copolar +45°/ –45°
0
Vertical Pattern 6° electrical downtilt
38
F- Dual Polarization Half-power Beam Width
1800 X 65°
XPol F- 1800 65° 15dBi 12°T
741 264
Type No. Frequency range Polarization
+45°, –45°
Gain
2 x 15 dBi
65°
120°
1710 – 1880 MHz
Horizontal: Vertical:
Electrical tilt
65° 14°
12°, fixed
Front-to-back ratio, copolar
> 30 dB
Isolation, between ports
> 30 dB
3
dB
10
Half-power beam width Copolar +45°/ –45°
0
Horizontal Pattern
50 Ω
Impedance
< 1.4
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
200 Watt (at 50 °C ambient temperature)
Input
14°
10
2 x 7-16 female 3
Connector position
Bottom
Weight
3.5 kg
Wind load
dB
VSWR
0
Frontal: 150 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
662 / 155 / 49 mm
Vertical Pattern 12° electrical downtilt
1800 –45°
1800 +45°
7-16
7-16
XPol F- 1800 65° 18dBi Type No. Frequency range Polarization Gain
739 494 120°
1710 – 1880 MHz
65°
+45°, –45° 2 x 18 dBi
Front-to-back ratio, copolar Isolation, between ports Impedance VSWR
Horizontal: Vertical:
65° 6.5°
> 30 dB > 30 dB
3
dB
10
Half-power beam width Copolar +45°/ –45°
0
Horizontal Pattern
50 Ω < 1.5
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
200 Watt (at 50 °C ambient temperature)
6.5°
Connector position*
2 x 7-16 female
10
Bottom or top 3
Weight
dB
Input
6 kg 0
Wind load
Frontal: 310 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1302 / 155 / 49 mm
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
Vertical Pattern
39
F- Dual Polarization Half-power Beam Width
1710–1990 X 65°
XPol F- 1710–1990 65° 18dBi 2°T Type No. Frequency range
739 495
Polarization
+45°, –45°
Gain
2 x 18 dBi
65°
120°
1710 – 1990 MHz
Horizontal: Vertical:
Electrical tilt
2°, fixed
Sidelobe suppression for first sidelobe above horizon
≥ 14 dB
Front-to-back ratio, copolar
> 30 dB
Isolation, between ports
> 30 dB
0
Horizontal Pattern
Max. power per input
200 Watt (at 50 °C ambient temperature)
10
3
dB
< –150 dBc 0
2 x 7-16 female
Vertical Pattern
Bottom
– 2° electrical downtilt – first null-fill below horizon better or equal –25 dB below maximum gain
Connector position Weight Wind load
7°
< 1.4 (1710 – 1880 MHz) < 1.5 (1880 – 1990 MHz)
Intermodulation IM3 (2 x 43 dBm carrier)
Input
3
50 Ω
Impedance VSWR
65° 7°
dB
10
Half-power beam width Copolar +45°/ –45°
6 kg Frontal: 310 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1302 / 155 / 49 mm
1710–1990 –45°
1710–1990 +45°
7-16
7-16
XPol F- 1710–1990 65° 18dBi 6°T Type No. Frequency range Polarization Gain
739 496 120°
1710 – 1990 MHz
65°
+45°, –45° 2 x 18 dBi Horizontal: Vertical:
Electrical tilt
6°, fixed
Sidelobe suppression for first sidelobe above horizon
≥ 14 dB
Front-to-back ratio, copolar
> 30 dB
Isolation, between ports
> 30 dB
VSWR
50 Ω
< –150 dBc
Max. power per input
200 Watt (at 50 °C ambient temperature)
Connector position Weight Wind load
0
Horizontal Pattern
7°
< 1.4 (1710 – 1880 MHz) < 1.5 (1880 – 1990 MHz)
Intermodulation IM3 (2 x 43 dBm carrier)
Input
3
10
3
dB
Impedance
65° 7°
dB
10
Half-power beam width Copolar +45°/ –45°
0
2 x 7-16 female
Vertical Pattern
Bottom
– 6° electrical downtilt – first null-fill below horizon better or equal –25 dB below maximum gain
6 kg Frontal: 310 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1302 / 155 / 49 mm
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
40
Multi-band F- Dual Polarization Half-power Beam Width Fixed Electrical Downtilt
1710 –2170 X 65° 2°
XPol F- 1710–2170 65° 18.5dBi 2°T
741 794
Type No. Frequency range 1710 – 1880 MHz
1710–2170 1850 – 1990 MHz
Polarization
+45°, –45°
+45°, –45°
+45°, –45°
Gain
2 x 17.5 dBi
2 x 18 dBi
2 x 18.5 dBi
Horizontal: 65° Vertical: 6.7°
Horizontal: 63° Vertical: 6.5°
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
67° 7°
1920 – 2170 MHz
Electrical tilt
2°, fixed
2°, fixed
2°, fixed
Sidelobe suppression for first sidelobe above horizon
> 14 dB
> 14 dB
> 14 dB
Front-to-back ratio, copolar
> 30 dB
> 30 dB
> 30 dB
Typically: 30 dB > 10 dB
Typically: 30 dB > 10 dB
Typically: 30 dB > 10 dB
Cross polar ratio Maindirection Sector
0° ±60°
Isolation, between ports
> 30 dB 50 Ω
Impedance VSWR
< 1.4
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
300 Watt (at 50 °C ambient temperature)
1710 – 1880 MHz: +45°/ –45° Polarization 125°
67° 7°
dB
3
3
dB
10
10
0 0
Horizontal Pattern
Vertical Pattern 2° electr. downtilt
1850 – 1990 MHz: +45°/ –45° Polarization 120°
1710 – 2170 –45°
1710 – 2170 +45°
7-16
7-16
65° 6.7°
dB
3
3
dB
10
10
Mechanical specifications
0
0
Horizontal Pattern
Vertical Pattern 2° electr. downtilt
Input
2 x 7-16 female
Connector position
1920 – 2170 MHz: +45°/ –45° Polarization
Weight Wind load
115°
63° 6.5°
Max. wind velocity dB
3 0
Horizontal Pattern
3
dB
10
10
Bottom 6.6 kg Frontal: Lateral: Rearside:
130 N (at 150 km/h) 110 N (at 150 km/h) 310 N (at 150 km/h) 200 km/h
Packing size
1404 x 172 x 92 mm
Height/width/depth
1302 / 155 / 69 mm
0
Vertical Pattern 2° electr. downtilt
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
41
F- Dual Polarization Half-power Beam Width Fixed Electrical Downtilt
1710–1990 X 65° 2°
XPol F- 1710–1990 65° 19.5dBi 2°T
Frequency range Polarization Gain Half-power beam width Copolar +45°/ –45°
739 498 65°
120°
1710 – 1990 MHz +45°, –45° 2 x 19.5 dBi (1880 – 1990 MHz) 2 x 19 dBi (1710 – 1880 MHz) Horizontal: Vertical:
65° 5°
10
3
dB
Type No.
0
2°, fixed
Sidelobe suppression for first sidelobe above horizon
≥ 14 dB
Front-to-back ratio, copolar
> 30 dB
Isolation, between ports
> 30 dB
Impedance
50 Ω
VSWR
< 1.5
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
200 Watt (at 50 °C ambient temperature)
Input
5° 10
3
2 x 7-16 female
Connector position
Bottom
Weight
8.5 kg
Wind load
Horizontal Pattern
dB
Electrical tilt
0
Vertical Pattern 2° electrical downtilt
Frontal: 480 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1942 / 155 / 49 mm
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
1710–1990 –45°
1710–1990 +45°
7-16
7-16
42
F- Dual Polarization Half-power Beam Width
1710 –1990 X 90°
XPol F- 1710–1990 90° 8dBi
Polarization Gain Half-power beam width Copolar +45°/ –45°
1710 – 1990 MHz +45°, –45° 2 x 8 dBi Horizontal: Vertical:
Front-to-back ratio, copolar
> 20 dB
Isolation, between ports
> 30 dB
Impedance
50 Ω
VSWR
< 1.4
90° 55°
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
200 Watt (at 50 °C ambient temperature)
Input Connector position*
90° 170°
2 x 7-16 female
3 0
Horizontal Pattern
55°
10
Bottom or top 3
Weight
dB
Frequency range
739 695
dB
Type No.
3 kg 0
Wind load
Frontal: 20 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
174 / 155 / 69 mm
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
Vertical Pattern
1710–1990 –45°
1710–1990 +45°
7-16
7-16
43
F- Dual Polarization Half-power Beam Width
1800 X 90°
XPol F- 1800 90° 14dBi
739 698
Frequency range
1710 – 1880 MHz
Polarization
+45°, –45°
Gain
2 x 14 dBi
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
Front-to-back ratio, copolar
> 25 dB
Isolation, between ports
> 30 dB
Impedance
50 Ω
VSWR
< 1.4
90° 14°
90° 170°
3
dB
Type No.
0
Horizontal Pattern
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
200 Watt (at 50 °C ambient temperature)
14°
2 x 7-16 female
Connector position*
10
Bottom or top 3
Weight
dB
Input
3.5 kg 0
Wind load
Frontal: 65 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
702 / 155 / 69 mm
Vertical Pattern
1800 –45°
1800 +45°
7-16
7-16
XPol F- 1800 90° 14dBi 4°T
Polarization Gain Half-power beam width Copolar +45°/ –45° Electrical tilt
741 214 1710 – 1880 MHz +45°, –45° 2 x 14 dBi Horizontal: Vertical:
90° 14°
4°, fixed
Front-to-back ratio, copolar
> 25 dB
Isolation, between ports
> 30 dB
Impedance
50 Ω
VSWR
< 1.4
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
200 Watt (at 50 °C ambient temperature)
Input
90° 170°
3 0
Horizontal Pattern
14°
10
2 x 7-16 female 3
Connector position
Bottom
Weight
3.5 kg
dB
Frequency range
dB
Type No.
0
Wind load
Frontal: 65 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
702 / 155 / 69 mm
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
Vertical Pattern 4° electrical downtilt
44
F- Dual Polarization Half-power Beam Width
1800 X 90°
XPol F- 1800 90° 16.5dBi 2°T
739 707
Polarization
+45°, –45°
Gain
2 x 16.5 dBi
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
Electrical tilt
2°, fixed
Sidelobe suppression for first sidelobe above horizon
≥ 14 dB
Front-to-back ratio, copolar
> 27 dB
Isolation, between ports
> 30 dB
Impedance
50 Ω
VSWR
< 1.4
90° 7°
0
7°
< –150 dBc
Max. power per input
200 Watt (at 50 °C ambient temperature)
Input
3
Horizontal Pattern
Intermodulation IM3 (2 x 43 dBm carrier)
10
3 0
2 x 7-16 female
Connector position
Bottom
Weight Wind load
90° 170°
1710 – 1880 MHz
dB
Frequency range
6 kg Frontal: 130 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1302 / 155 / 69 mm
dB
Type No.
Vertical Pattern – 2° electrical downtilt – first null-fill below horizon better or equal –25 dB below maximum gain 1800 –45°
1800 +45°
7-16
7-16
XPol F- 1800 90° 16.5dBi 6°T
Frequency range Polarization Gain Half-power beam width Copolar +45°/ –45°
739 708
90° 170°
1710 – 1880 MHz +45°, –45° 2 x 16.5 dBi Horizontal: Vertical:
Electrical tilt
6°, fixed
Sidelobe suppression for first sidelobe above horizon
≥ 14 dB
Front-to-back ratio, copolar
> 27 dB
Isolation, between ports
> 30 dB
Impedance
50 Ω
VSWR
< 1.4
90° 7°
3
dB
Type No.
0
Horizontal Pattern
7°
< –150 dBc
Max. power per input
200 Watt (at 50 °C ambient temperature)
Input Connector position Weight Wind load
10
3 0
2 x 7-16 female Bottom 6 kg Frontal: 130 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1302 / 155 / 69 mm
dB
Intermodulation IM3 (2 x 43 dBm carrier)
Vertical Pattern – 6° electrical downtilt – first null-fill below horizon better or equal –25 dB below maximum gain
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
45
Multi-band F- Dual Polarization Half-power Beam Width Fixed Electrical Downtilt
1710 –2170 X 85° 2°
XPol F- 1710–2170 85° 17dBi 2°T
741 987
Type No. Frequency range 1710 – 1880 MHz
1710–2170 1850 – 1990 MHz
1920 – 2170 MHz
Polarization
+45°, –45°
+45°, –45°
+45°, –45°
Gain
2 x 16.5 dBi
2 x 16.8 dBi
2 x 17 dBi
Horizontal: 85° Vertical: 6.7°
Horizontal: 85° Vertical: 6.5°
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
90° 7°
Electrical tilt
2°, fixed
2°, fixed
2°, fixed
Sidelobe suppression for first sidelobe above horizon
> 14 dB
> 14 dB
> 14 dB
Front-to-back ratio, copolar
> 25 dB
> 25 dB
> 25 dB
Typically: 20 dB > 10 dB
Typically: 20 dB > 10 dB
Typically: 20 dB > 10 dB
Cross polar ratio Maindirection Sector
0° ±60°
Isolation, between ports
> 30 dB 50 Ω
Impedance VSWR
< 1.4
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
300 Watt (at 50 °C ambient temperature)
1710 – 1880 MHz: +45°/ –45° Polarization 90° 170°
7°
10
3
0
dB
3
dB
10
0
Horizontal Pattern
Vertical Pattern 2° electr. downtilt
1850 – 1990 MHz: +45°/ –45° Polarization 85°
1710 – 2170 –45°
1710 – 2170 +45°
7-16
7-16
170°
6.7°
10
3
0
dB
3
dB
10
Mechanical specifications
0
Horizontal Pattern
Vertical Pattern 2° electr. downtilt
Input
2 x 7-16 female
Connector position
1920 – 2170 MHz: +45°/ –45° Polarization
Weight Wind load
85° 170°
6.5°
Max. wind velocity 10
0
Horizontal Pattern
3
dB
3
dB
10
Bottom 6 kg Frontal: Lateral: Rearside:
130 N (at 150 km/h) 110 N (at 150 km/h) 310 N (at 150 km/h) 200 km/h
Packing size
1404 x 172 x 92 mm
Height/width/depth
1302 / 155 / 69 mm
0
Vertical Pattern 2° electr. downtilt
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
46
F- Dual Polarization Half-power Beam Width Fixed Electrical Downtilt
1800 X 90° 2°
XPol F- 1800 90° 17.5dBi 2°T
Polarization
+45°, –45°
Gain
2 x 17.5 dBi
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
Electrical tilt
2°, fixed
Sidelobe suppression for first sidelobe above horizon
≥ 14 dB
Front-to-back ratio, copolar
> 25 dB
Isolation, between ports
> 30 dB
Impedance
50 Ω
VSWR
< 1.4
90° 5°
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
200 Watt (at 50 °C ambient temperature)
Input Connector position Weight Wind load
90° 170°
1710 – 1880 MHz
3 0
Horizontal Pattern
5° 10
3 0
2 x 7-16 female Bottom 9 kg Frontal: 190 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1902 / 155 / 69 mm
dB
Frequency range
739 710
dB
Type No.
Vertical Pattern – 2° electrical downtilt – first null-fill below horizon better or equal –25 dB below maximum gain
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
1800 –45°
1800 +45°
7-16
7-16
47
Multi-band F- Dual Polarization Half-power Beam Width Adjust. Electrical Downtilt
1710 –2170 X 65° 0°– 8°
XPol F- 1710–2170 65° 18dBi 0°–8°T
741 784
Type No. Frequency range 1710 – 1880 MHz
1710–2170 1850 – 1990 MHz
1920 – 2170 MHz
Polarization
+45°, –45°
+45°, –45°
+45°, –45°
Gain
2 x 17.5 dBi
2 x 17.7 dBi
2 x 18 dBi
Horizontal: 65° Vertical: 6.7°
Horizontal: 63° Vertical: 6.5°
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
67° 7°
Electrical tilt
0°– 8° continously adjustable
0°– 8° continously adjustable
0°– 8° continously adjustable
Sidelobe suppression for first sidelobe above horizon
0° ... 2° ... 5° ... 8°T 16 ... 16 ... 14 .... 14 dB
0° ... 2° ... 5° ... 8°T 18 ... 18 ... 16 ... 14 dB
0° ... 2° ... 5° ... 8°T 18 ... 18 ... 16 ... 14 dB
Front-to-back ratio, copolar
> 30 dB
> 30 dB
> 30 dB
Typically: 25 dB > 10 dB
Typically: 25 dB > 10 dB
Typically: 25 dB > 10 dB
> 30 dB
> 30 dB
> 30 dB
Cross polar ratio Maindirection Sector
0° ±60°
Isolation, between ports Impedance
50 Ω
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< 1.5
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
300 Watt (at 50 °C ambient temperature)
1710 – 1880 MHz: +45°/ –45° Polarization 125°
67°
7°
dB
3
3
dB
10
10
0 0
Horizontal Pattern
Vertical Pattern 0°– 8° electrical downtilt continously adjustable
1850 – 1990 MHz: +45°/ –45° Polarization 120°
1710 – 2170 –45°
1710 – 2170 +45°
7-16
7-16
65° 6.7°
10
3
Mechanical specifications dB
3
dB
10
Input
Horizontal Pattern
Vertical Pattern 0°– 8° electrical downtilt continously adjustable
1920 – 2170 MHz: +45°/ –45° Polarization
Connector position Adjustment mechanism
120°
63° 6.5°
Max. wind velocity dB
0
Horizontal Pattern
3
dB
10
10
Bottom 1x, Position bottom continously adjustable
Weight Wind load
3
2 x 7-16 female
0
0
7 kg Frontal: Lateral: Rearside:
130 N (at 150 km/h) 110 N (at 150 km/h) 310 N (at 150 km/h) 200 km/h
Packing size
1404 x 172 x 92 mm
Height/width/depth
1302 / 155 / 69 mm
0
Vertical Pattern 0°– 8° electrical downtilt continously adjustable
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
48
Multi-band F- Dual Polarization Half-power Beam Width Adjust. Electrical Downtilt
1710 –2170 X 85° 2°– 8°
XPol F- 1710–2170 85° 17dBi 2°–8°T
741 989
Type No. Frequency range 1710 – 1880 MHz
1710–2170 1850 – 1990 MHz
1920 – 2170 MHz
Polarization
+45°, –45°
+45°, –45°
+45°, –45°
Gain
2 x 16.5 dBi
2 x 16.8 dBi
2 x 17 dBi
Horizontal: 85° Vertical: 6.7°
Horizontal: 85° Vertical: 6.5°
2°– 8° continously adjustable
2°– 8° continously adjustable
2°– 8° continously adjustable
Sidelobe suppression for first sidelobe above horizon
> 14 dB
> 14 dB
> 14 dB
Front-to-back ratio, copolar
> 25 dB
> 25 dB
> 25 dB
Typically: 20 dB > 10 dB
Typically: 20 dB > 10 dB
Typically: 20 dB > 10 dB
> 30 dB
> 30 dB
> 30 dB
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
Electrical tilt
Cross polar ratio Maindirection Sector
0° ±60°
Isolation, between ports
90° 7°
Impedance
50 Ω
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< 1.4
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
300 Watt (at 50 °C ambient temperature)
1710 – 1880 MHz: +45°/ –45° Polarization 90° 170°
7° 10
3
0
dB
3
dB
10
0
Horizontal Pattern
Vertical Pattern 2°– 8° electrical downtilt continously adjustable
1850 – 1990 MHz: +45°/ –45° Polarization
1710 – 2170 –45°
1710 – 2170 +45°
7-16
7-16
85° 170°
6.7°
10
Mechanical specifications
3
0
dB
3
dB
10
Input
Horizontal Pattern
Vertical Pattern 2°– 8° electrical downtilt continously adjustable
1920 – 2170 MHz: +45°/ –45° Polarization
Connector position Adjustment mechanism
170°
6.5°
Max. wind velocity 10
0
Horizontal Pattern
3
dB
dB
10
Bottom 1x, Position bottom continously adjustable
Weight Wind load
85°
3
2 x 7-16 female
0
6 kg Frontal: Lateral: Rearside:
130 N (at 150 km/h) 110 N (at 150 km/h) 310 N (at 150 km/h) 200 km/h
Packing size
1404 x 172 x 92 mm
Height/width/depth
1302 / 155 / 69 mm
0
Vertical Pattern 2°– 8° electrical downtilt continously adjustable
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
49
50
Summary – Directional Antennas Dual-band 900/1800/2000 Dual-band 900/1800 – Dual Polarization + 45°/ –45° Type
Type No.
Frequency range [MHz]
Height [mm]
Page
XXPol A- 900/1800 XXPol A- 900/1800
C
65°/65° 12.5/13 dBi 65°/65° 12.5/13.5 dBi
741 316 741 325
870 – 960 / 1710 – 1880 870 – 960 / 1710 – 1880
656 656
52 53
XXPol A- 900/1800 XXPol A- 900/1800
C
65°/60° 65°/60°
15/16.5 dBi 15/17 dBi
741 320 741 326
870 – 960 / 1710 – 1880 870 – 960 / 1710 – 1880
1296 1296
54 55
XXPol A- 900/1800 XXPol A- 900/1800
C
65°/60° 65°/60°
17/18 dBi 17/18.5 dBi
741 322 741 327
870 – 960 / 1710 – 1880 870 – 960 / 1710 – 1880
1936 1936
56 57
XXPol A- 900/1800 XXPol A- 900/1800
C
65°/60° 65°/60°
18/19 dBi 18/19.5 dBi
741 324 741 328
870 – 960 / 1710 – 1880 870 – 960 / 1710 – 1880
2580 2580
58 59
XXPol A- 900/1800 XXPol A- 900/1800
C
65°/60° 17.5/17.5 dBi 65°/60° 17.5/18 dBi
741 336 741 344
870 – 960 / 1710 – 1880 870 – 960 / 1710 – 1880
2580 2580
60 61
6°T 6°T
Connector position: Bottom
Dual-band 900/1800 – Dual Polarization + 45°/ –45° Adjustable Electrical Downtilt XXPol A- 824–960/1800
C
XXPol A- 824–960/1800
XXPol A-
900/1800
C
65°/60°
14.5/16.5 dBi 0°–10°T/2°T
742 151
824 – 960 / 1710 – 1880
1296
62
65°/60°
14.5/17 dBi 0°–10°T/2°T
742 152
824 – 960 / 1710 – 1880
1296
63
65°/60°
17/18 dBi 2°–8°T/2°T
742 047
870 – 960 / 1710 – 1880
2580
64
Connector position: Bottom
New Products
Dual-band 900/1800/2000 – Vertical Polarization VPol BiDir VPol BiDir
800/2000 800/2000
65° 65°
5dBi 5dBi
738 445 738 446
824 – 960 / 1710 – 2170 824 – 960 / 1710 – 2170
310 310
65 65
VPol F-
800/1800
90°
10dBi
741 880
880 – 960 / 1710 – 1880
502
66
Connector position: Bottom or top
New Products
51
Dual-band A- Dual Polarization Half-power Beam Width Integrated Combiner
900
1800
X
X
65°
65° C
XXPol A- 900/1800 C 65°/ 65° 12.5/13dBi
741 316
Type No. Frequency range
900 870 – 960 MHz
1800 1710 – 1880 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 12.5 dBi
2 x 13 dBi
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
65° 28°
Horizontal: Vertical:
Front-to-back ratio, copolar
> 30 dB
> 30 dB
Isolation, between ports
> 30 dB
> 30 dB
60° 19°
Impedance
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< –150 dBc
< –150 dBc
Intermodulation IM3 (2 x 43 dBm carrier) Max. power per input
250 Watt 150 Watt (at 50 °C ambient temperature)
Integrated combiner
The insertion loss is included in the given antenna gain values.
900 +45°/ –45° Polarization
120°
1800 –45°
900 +45°
900 –45°
65°
1800 +45°
C
C
7-16
7-16
28°
dB
3
3
dB
10
10
0
0
Horizontal Pattern
Mechanical specifications
Vertical Pattern
Input Connector position*
1800 +45°/ –45° Polarization
2 x 7-16 female Bottom or top
Weight Wind load 120°
65° 19°
Frontal: Lateral: Rearside:
110 N (at 150 km/h) 60 N (at 150 km/h) 240 N (at 150 km/h) 200 km/h
Packing size
782 x 287 x 165 mm
Height/width/depth
656 / 262 / 116 mm
dB
0
Horizontal Pattern
3
dB
10
10
3
Max. wind velocity
7 kg
* Inverted mounting: Connector position top: Change drain hole screw.
0
Vertical Pattern
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
52
Dual-band A- Dual Polarization Half-power Beam Width
900
1800
X
X
65°
65°
XXPol A- 900/1800 65°/ 65° 12.5/13.5dBi
741 325
Type No. Frequency range
900 870 – 960 MHz
1800 1710 – 1880 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 12.5 dBi
2 x 13.5 dBi
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
Front-to-back ratio, copolar Isolation, between ports
65° 28°
Horizontal: Vertical:
> 30 dB
65° 19°
> 30 dB
> 30 dB (GSM 900 – GSM 900)1 > 30 dB (GSM 1800 – GSM 1800) > 30 dB (GSM 900 – GSM 1800)
Impedance
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< –150 dBc
< –150 dBc
Intermodulation IM3 (2 x 43 dBm carrier) Max. power per input
250 Watt 150 Watt (at 50 °C ambient temperature)
900 +45°/ –45° Polarization
120°
1800 –45°
900 –45°
900 +45°
1800 +45°
7-16
7-16
7-16
7-16
65° 28°
dB
3
3
dB
10
10
0
0
Horizontal Pattern
Mechanical specifications
Vertical Pattern
Input Connector position*
1800 +45°/ –45° Polarization
4 x 7-16 female Bottom or top
Weight Wind load 120°
65° 19°
Frontal: Lateral: Rearside:
110 N (at 150 km/h) 60 N (at 150 km/h) 240 N (at 150 km/h) 200 km/h
Packing size
782 x 287 x 165 mm
Height/width/depth
656 / 262 / 116 mm
dB
0
Horizontal Pattern
3
dB
10
10
3
Max. wind velocity
7 kg
* Inverted mounting: Connector position top: Change drain hole screw.
0
Vertical Pattern
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
53
Dual-band A- Dual Polarization Half-power Beam Width Integrated Combiner
900
1800
X
X
65°
60° C
XXPol A- 900/1800 C 65°/ 60° 15/16.5dBi
741 320
Type No. Frequency range
900 870 – 960 MHz
1800 1710 – 1880 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 15 dBi
2 x 16.5 dBi
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
65° 14°
Horizontal: Vertical:
Front-to-back ratio, copolar
> 30 dB
> 30 dB
Isolation, between ports
> 30 dB
> 30 dB
60° 8°
Impedance
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< –150 dBc
< –150 dBc
Intermodulation IM3 (2 x 43 dBm carrier) Max. power per input
250 Watt 150 Watt (at 50 °C ambient temperature)
Integrated combiner
The insertion loss is included in the given antenna gain values.
900 +45°/ –45° Polarization
120°
1800 –45°
900 +45°
900 –45°
65°
1800 +45°
C
C
7-16
7-16
14°
dB
3
3
dB
10
10
0
0
Horizontal Pattern
Mechanical specifications
Vertical Pattern
Input Connector position*
1800 +45°/ –45° Polarization
2 x 7-16 female Bottom or top
Weight Wind load 115°
60° 8°
Frontal: Lateral: Rearside:
220 N (at 150 km/h) 140 N (at 150 km/h) 490 N (at 150 km/h) 200 km/h
Packing size
1422 x 287 x 165 mm
Height/width/depth
1296 / 262 / 116 mm
dB
0
Horizontal Pattern
3
dB
10
10
3
Max. wind velocity
13 kg
* Inverted mounting: Connector position top: Change drain hole screw.
0
Vertical Pattern
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
54
Dual-band A- Dual Polarization Half-power Beam Width
900
1800
X
X
65°
60°
XXPol A- 900/1800 65°/ 60° 15/17dBi
741 326
Type No. Frequency range
900 870 – 960 MHz
1800 1710 – 1880 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 15 dBi
2 x 17 dBi
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
Front-to-back ratio, copolar Isolation, between ports
65° 14°
Horizontal: Vertical:
> 30 dB
60° 8°
> 30 dB
> 30 dB (GSM 900 – GSM 900)1 > 30 dB (GSM 1800 – GSM 1800) > 30 dB (GSM 900 – GSM 1800)
Impedance
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< –150 dBc
< –150 dBc
Intermodulation IM3 (2 x 43 dBm carrier) Max. power per input
400 Watt 200 Watt (at 50 °C ambient temperature)
900 +45°/ –45° Polarization
120°
1800 –45°
900 –45°
900 +45°
1800 +45°
7-16
7-16
7-16
7-16
65° 14°
dB
3
3
dB
10
10
0
0
Horizontal Pattern
Mechanical specifications
Vertical Pattern
Input Connector position*
1800 +45°/ –45° Polarization
4 x 7-16 female Bottom or top
Weight Wind load 115°
60° 8°
Frontal: Lateral: Rearside:
220 N (at 150 km/h) 140 N (at 150 km/h) 490 N (at 150 km/h) 200 km/h
Packing size
1422 x 287 x 165 mm
Height/width/depth
1296 / 262 / 116 mm
dB
0
Horizontal Pattern
3
dB
10
10
3
Max. wind velocity
13 kg
* Inverted mounting: Connector position top: Change drain hole screw.
0
Vertical Pattern
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
55
Dual-band A- Dual Polarization Half-power Beam Width Integrated Combiner
900
1800
X
X
65°
60° C
XXPol A- 900/1800 C 65°/ 60° 17/18dBi
741 322
Type No. Frequency range
900 870 – 960 MHz
1800 1710 – 1880 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 17 dBi
2 x 18 dBi
Horizontal: 65° Vertical: 9.5°
Horizontal: 60° Vertical: 5.5°
> 15 dB
> 15 dB
Half-power beam width Copolar +45°/ –45° Sidelobe suppression for first sidelobe above horizon Front-to-back ratio, copolar
> 30 dB
> 30 dB
Isolation, between ports
> 30 dB
> 30 dB
Impedance
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< –150 dBc
< –150 dBc
Intermodulation IM3 (2 x 43 dBm carrier) Max. power per input
250 Watt 150 Watt (at 50 °C ambient temperature)
Integrated combiner
The insertion loss is included in the given antenna gain values.
900 +45°/ –45° Polarization
120°
65° 9.5°
1800 –45°
900 +45°
900 –45°
1800 +45°
C
C
7-16
7-16
10
3
dB
3
dB
10
0
0
Horizontal Pattern
Mechanical specifications
Vertical Pattern
Input Connector position*
1800 +45°/ –45° Polarization
2 x 7-16 female Bottom or top
Weight Wind load 115°
60° 5.5°
Frontal: Lateral: Rearside:
330 N (at 150 km/h) 200 N (at 150 km/h) 770 N (at 150 km/h) 200 km/h
Packing size
2057 x 287 x 165 mm
Height/width/depth
1936 / 262 / 116 mm
dB
0
Horizontal Pattern
3
dB
10
10
3
Max. wind velocity
19 kg
* Inverted mounting: Connector position top: Change drain hole screw.
0
Vertical Pattern
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
56
Dual-band A- Dual Polarization Half-power Beam Width
900
1800
X
X
65°
60°
XXPol A- 900/1800 65°/ 60° 17/18.5dBi
741 327
Type No. Frequency range
900 870 – 960 MHz
1800 1710 – 1880 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 17 dBi
2 x 18.5 dBi
Horizontal: 65° Vertical: 9.5°
Horizontal: 60° Vertical: 5.5°
Half-power beam width Copolar +45°/ –45° Sidelobe suppression for first sidelobe above horizon Front-to-back ratio, copolar Isolation, between ports
> 15 dB > 30 dB
> 30 dB
> 30 dB (GSM 900 – GSM 900)1 > 30 dB (GSM 1800 – GSM 1800) > 30 dB (GSM 900 – GSM 1800)
Impedance
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< –150 dBc
< –150 dBc
Intermodulation IM3 (2 x 43 dBm carrier) Max. power per input
400 Watt 200 Watt (at 50 °C ambient temperature)
900 +45°/ –45° Polarization
120°
65° 9.5°
1800 –45°
900 –45°
900 +45°
1800 +45°
7-16
7-16
7-16
7-16
10
3
dB
3
dB
10
0
0
Horizontal Pattern
Mechanical specifications
Vertical Pattern
Input Connector position*
1800 +45°/ –45° Polarization
4 x 7-16 female Bottom or top
Weight Wind load 115°
60° 5.5°
Frontal: Lateral: Rearside:
330 N (at 150 km/h) 200 N (at 150 km/h) 770 N (at 150 km/h) 200 km/h
Packing size
2057 x 287 x 165 mm
Height/width/depth
1936 / 262 / 116 mm
dB
0
Horizontal Pattern
3
dB
10
10
3
Max. wind velocity
19 kg
* Inverted mounting: Connector position top: Change drain hole screw.
0
Vertical Pattern
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
57
Dual-band A- Dual Polarization Half-power Beam Width Integrated Combiner
900
1800
X
X
65°
60° C
XXPol A- 900/1800 C 65°/ 60° 18/19dBi
741 324
Type No. Frequency range
900 870 – 960 MHz
1800 1710 – 1880 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 18 dBi
2 x 19 dBi
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
65° 7°
Horizontal: Vertical:
Front-to-back ratio, copolar
> 30 dB
> 30 dB
Isolation, between ports
> 30 dB
> 30 dB
60° 4°
Impedance
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< –150 dBc
< –150 dBc
Intermodulation IM3 (2 x 43 dBm carrier) Max. power per input
250 Watt 150 Watt (at 50 °C ambient temperature)
Integrated combiner
The insertion loss is included in the given antenna gain values.
900 +45°/ –45° Polarization
120°
65° 7°
1800 –45°
900 –45°
10
C
7-16
7-16
dB
dB
3 0
0
Horizontal Pattern
Mechanical specifications
Vertical Pattern
Input Connector position*
1800 +45°/ –45° Polarization
Weight Wind load 115°
60° 4°
Max. wind velocity
2 x 7-16 female Bottom or top 25 kg Frontal: 470 N (at 150 km/h) Lateral: 280 N (at 150 km/h) Rearside: 1040 N (at 150 km/h) 200 km/h
Packing size
2692 x 287 x 165 mm
Height/width/depth
2580 / 262 / 116 mm
dB
0
Horizontal Pattern
3
dB
10
10
3
1800 +45°
C
10 3
900 +45°
* Inverted mounting: Connector position top: Change drain hole screw.
0
Vertical Pattern
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
58
Dual-band A- Dual Polarization Half-power Beam Width
900
1800
X
X
65°
60°
XXPol A- 900/1800 65°/ 60° 18/19.5dBi
741 328
Type No. Frequency range
900 870 – 960 MHz
1800 1710 – 1880 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 18 dBi
2 x 19.5 dBi
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
Front-to-back ratio, copolar Isolation, between ports
65° 7°
Horizontal: Vertical:
> 30 dB
60° 4°
> 30 dB
> 30 dB (GSM 900 – GSM 900)1 > 30 dB (GSM 1800 – GSM 1800) > 30 dB (GSM 900 – GSM 1800)
Impedance
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< –150 dBc
< –150 dBc
Intermodulation IM3 (2 x 43 dBm carrier) Max. power per input
400 Watt 200 Watt (at 50 °C ambient temperature)
900 +45°/ –45° Polarization
120°
65° 7°
1800 –45°
900 –45°
900 +45°
1800 +45°
7-16
7-16
7-16
7-16
10
3
dB
3
dB
10
0
0
Horizontal Pattern
Mechanical specifications
Vertical Pattern
Input Connector position*
1800 +45°/ –45° Polarization
Weight Wind load 115°
60° 4°
Bottom or top 25 kg Frontal: 470 N (at 150 km/h) Lateral: 280 N (at 150 km/h) Rearside: 1040 N (at 150 km/h) 200 km/h
Packing size
2692 x 287 x 165 mm
Height/width/depth
2580 / 262 / 116 mm
dB
0
Horizontal Pattern
3
dB
10
10
3
Max. wind velocity
4 x 7-16 female
* Inverted mounting: Connector position top: Change drain hole screw.
0
Vertical Pattern
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
59
Dual-band A- Dual Polarization Half-power Beam Width Fixed Electrical Downtilt Integrated Combiner
900
1800
X
X
65°
60°
6°
6° C
XXPol A- 900/1800 C 65°/ 60° 17.5/17.5dBi 6°T
741 336
Type No. Frequency range
900 870 – 960 MHz
1800 1710 – 1880 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 17.5 dBi
2 x 17.5 dBi
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
65° 7°
Horizontal: 60° Vertical: 6.5°
Electrical tilt
6°, fixed
6°, fixed
Front-to-back ratio, copolar
> 30 dB
> 30 dB
Isolation, between ports
> 30 dB
> 30 dB
50 Ω
50 Ω
Impedance VSWR Intermodulation IM3 (2 x 43 dBm carrier)
< 1.5
< 1.5
< –150 dBc
< –150 dBc
Max. power per input
250 Watt 150 Watt (at 50 °C ambient temperature)
Integrated combiner
The insertion loss is included in the given antenna gain values.
900 +45°/ –45° Polarization
120°
65° 7°
900 –45°
10
3
900 +45°
1800 +45°
C
C
7-16
7-16
dB
dB
10
3
1800 –45°
0
0
Horizontal Pattern
Vertical Pattern 6° electr. downtilt Mechanical specifications
1800 +45°/ –45° Polarization
Input Connector position
115°
Weight
60°
Wind load 6.5°
0
Horizontal Pattern
3
dB
dB
3
Max. wind velocity
10
10
2 x 7-16 female Bottom 25 kg Frontal: 470 N (at 150 km/h) Lateral: 280 N (at 150 km/h) Rearside: 1040 N (at 150 km/h) 200 km/h
Packing size
2692 x 287 x 165 mm
Height/width/depth
2580 / 262 / 116 mm
0
Vertical Pattern 6° electr. downtilt
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
60
Dual-band A- Dual Polarization Half-power Beam Width Fixed Electrical Downtilt
900
1800
X
X
65°
60°
6°
6°
XXPol A- 900/1800 65°/ 60° 17.5/18dBi 6°T
741 344
Type No. Frequency range
900 870 – 960 MHz
1800 1710 – 1880 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 17.5 dBi
2 x 18 dBi
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
65° 7°
Horizontal: 60° Vertical: 6.5°
Electrical tilt
6°, fixed
6°, fixed
Front-to-back ratio, copolar
> 30 dB
> 30 dB
Isolation, between ports
> 30 dB (GSM 900 – GSM 900)1 > 30 dB (GSM 1800 – GSM 1800) > 30 dB (GSM 900 – GSM 1800) 50 Ω
Impedance VSWR Intermodulation IM3 (2 x 43 dBm carrier) Max. power per input
50 Ω
< 1.5
< 1.5
< –150 dBc
< –150 dBc
400 Watt 200 Watt (at 50 °C ambient temperature)
900 +45°/ –45° Polarization
120°
65° 7°
900 –45°
900 +45°
1800 +45°
7-16
7-16
7-16
7-16
dB
3
dB
10
10
3
1800 –45°
0
0
Horizontal Pattern
Vertical Pattern 6° electr. downtilt Mechanical specifications
1800 +45°/ –45° Polarization
Input Connector position
115°
Weight
60°
Wind load 6.5°
0
Horizontal Pattern
3
dB
dB
3
Max. wind velocity
10
10
4 x 7-16 female Bottom or top 25 kg Frontal: 470 N (at 150 km/h) Lateral: 280 N (at 150 km/h) Rearside: 1040 N (at 150 km/h) 200 km/h
Packing size
2692 x 287 x 165 mm
Height/width/depth
2580 / 262 / 116 mm
0
Vertical Pattern 6° electr. downtilt
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
61
Dual-band A- Dual Polarization Half-power Beam Width Adjust. Electr. Downtilt Integrated Combiner
824 – 960
1710 –1880
X
X
65°
60°
0°–10°
2° C
XXPol A- 824–960/1800 C 65°/60° 14.5/16.5dBi 0°–10°T/2°T
742 151
Type No. Frequency range
824–960 824 – 880 MHz 880 – 960 MHz
1710–1880 1710 – 1880 MHz
Polarization
+45°, –45°
+45°, –45°
+45°, –45°
Gain
2 x 14 dBi
2 x 14.5 dBi
2 x 16.5 dBi
Horizontal: 70° Vertical: 16°
Horizontal: 65° Vertical: 15°
Horizontal: 60° Vertical: 8°
0°–10°
0°–10°
2°
Half-power beam width Copolar +45°/ –45° Electrical tilt Sidelobe suppression for first sidelobe above horizon Front-to-back ratio, copolar Cross polar ratio Maindirection Sector
0° ±60°
Isolation, between ports
0° ... 6° ... 10°T 0° ... 6° ... 10°T 16 ... 14 ... 12 dB 18 ... 16 ... 14 dB
14 dB
> 30 dB
> 30 dB
> 30 dB
Typically: 18 dB > 10 dB
Typically: 18 dB > 10 dB
Typically: 18 dB > 10 dB
> 30 dB
> 30 dB
Impedance
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< –150 dBc
< –150 dBc
Intermodulation IM3 (2 x 43 dBm carrier) Max. power per input
250 Watt 150 Watt (at 50 °C ambient temperature)
Integrated combiner
The insertion loss is included in the given antenna gain values.
824 – 960 +45°/ –45° Polarization
120°
65°
1800 –45°
900 +45°
900 –45°
1800 +45°
15°
C
3
7-16
7-16
dB
dB
3
C 10
10
0
0
Horizontal Pattern
Vertical Pattern 0°–10° electrical downtilt continously adjustable
Input
Adjustment mechanism
8°
Max. wind velocity
10
Horizontal Pattern
3
dB
dB
10
0
Bottom 1x, Position bottom continously adjustable
Weight
60°
Wind load
3
2 x 7-16 female
Connector position
1710 –1880 +45°/ –45° Polarization
120°
Mechanical specifications
14 kg Frontal: Lateral: Rearside:
230 N (at 150 km/h) 130 N (at 150 km/h) 500 N (at 150 km/h) 200 km/h
Packing size
1422 x 287 x 165 mm
Height/width/depth
1296 / 262 / 116 mm
0
Vertical Pattern 2° electrical downtilt
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
62
Dual-band A- Dual Polarization Half-power Beam Width Adjust. Electr. Downtilt
824 – 960
1710 –1880
X
X
65°
60°
0°–10°
2°
XXPol A- 824–960/1800 65°/60° 14.5/17dBi 0°–10°T/2°T
742 152
Type No. Frequency range
824–960 824 – 880 MHz 880 – 960 MHz
1710–1880 1710 – 1880 MHz
Polarization
+45°, –45°
+45°, –45°
+45°, –45°
Gain
2 x 14 dBi
2 x 14.5 dBi
2 x 17 dBi
Horizontal: 70° Vertical: 16°
Horizontal: 65° Vertical: 15°
Horizontal: 60° Vertical: 8°
0°–10°
0°–10°
2°
Half-power beam width Copolar +45°/ –45° Electrical tilt Sidelobe suppression for first sidelobe above horizon Front-to-back ratio, copolar Cross polar ratio Maindirection Sector
0° ±60°
Isolation, between ports
0° ... 6° ... 10°T 0° ... 6° ... 10°T 16 ... 14 ... 12 dB 18 ... 16 ... 14 dB
14 dB
> 30 dB
> 30 dB
> 30 dB
Typically: 18 dB > 10 dB
Typically: 18 dB > 10 dB
Typically: 18 dB > 10 dB
> 30 dB
> 30 dB
Impedance
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< –150 dBc
< –150 dBc
Intermodulation IM3 (2 x 43 dBm carrier) Max. power per input
250 Watt 150 Watt (at 50 °C ambient temperature)
824 – 960 +45°/ –45° Polarization
120°
1710 –1880 –45°
824 – 960 –45°
824 – 960 +45°
1710 –1880 +45°
7-16
7-16
7-16
7-16
65° 15°
dB
3
3
dB
10
10
0
0
Horizontal Pattern
Vertical Pattern 0°–10° electrical downtilt continously adjustable
Input
Adjustment mechanism
8°
Max. wind velocity
10
Horizontal Pattern
3
dB
dB
10
0
Bottom 1x, Position bottom continously adjustable
Weight
60°
Wind load
3
4 x 7-16 female
Connector position
1710 –1880 +45°/ –45° Polarization
120°
Mechanical specifications
14 kg Frontal: Lateral: Rearside:
230 N (at 150 km/h) 130 N (at 150 km/h) 500 N (at 150 km/h) 200 km/h
Packing size
1422 x 287 x 165 mm
Height/width/depth
1296 / 262 / 116 mm
0
Vertical Pattern 2° electrical downtilt
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
63
Dual-band A- Dual Polarization Half-power Beam Width Adjust. Electr. Downtilt Integrated Combiner
900
1800
X
X
65°
60°
2°– 8°
2° C
XXPol A- 900/1800 C 65°/ 60° 17/18dBi 2°–8°T/2°T
742 047
Type No. Frequency range
900 870 – 960 MHz
Polarization Gain Half-power beam width Copolar +45°/ –45°
+45°, –45°
+45°, –45°
2 x 17 dBi (–0.5 dB)
2 x 18 dBi (–0.5 dB)
Horizontal: Vertical:
Electrical tilt
1800 1710 – 1880 MHz
65° 7°
Horizontal: Vertical:
2°– 8°, adjustable
2°, fixed
Sidelobe suppression for first sidelobe above horizon
2° ... 4° ... 6° ... 8° T 20 ... 18 ... 17 ... 15 dB
2° T 17 dB
Front-to-back ratio, copolar
> 30 dB
> 30 dB
Isolation, between ports
> 30 dB
> 30 dB
50 Ω
50 Ω
Impedance VSWR Intermodulation IM3 (2 x 43 dBm carrier)
60° 6°
< 1.5
< 1.5
< –150 dBc
< –150 dBc
Max. power per input
250 Watt 150 Watt (at 50 °C ambient temperature)
Integrated combiner
The insertion loss is included in the given antenna gain values.
900 +45°/ –45° Polarization
120°
65° 7°
1800 –45°
900 –45°
900 +45°
1800 +45°
C
C
7-16
7-16
10
3
dB
3
dB
10
0
0
Horizontal Pattern
Mechanical specifications
Vertical Pattern 2°– 8° electrical downtilt continously adjustable
Input Connector position
1800 +45°/ –45° Polarization
Adjustment mechanism Weight
120°
60°
Wind load 6°
0
Horizontal Pattern
3
dB
dB
3
Max. wind velocity
10
10
2 x 7-16 female Bottom 1x, Position bottom continously adjustable 25 kg Frontal: 470 N (at 150 km/h) Lateral: 280 N (at 150 km/h) Rearside: 1040 N (at 150 km/h) 200 km/h
Packing size
2692 x 287 x 165 mm
Height/width/depth
2580 / 262 / 116 mm
0
Vertical Pattern 2° electrical downtilt
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
64
Multi-band Bidirectional Antenna Vertical Polarization Half-power Beam Width
800/2000 V 65°
VPol BiDir 800/2000 65° 5dBi Type No.
738 445
738 446
Input
1 x 7-16 female
1 x N female
Frequency range
824 – 960 MHz, 1710 – 2170 MHz < 1.5 824 – 960 MHz: 5 dBi 1710 – 1880 MHz: 5.5 dBi 1880 – 2170 MHz: 6.5 dBi
Impedance
50 Ω
Polarization
Vertical
Max. power (total)
372 mm
Gain
400 mm
VSWR
200 Watt (at 50 °C ambient temperature)
Weight
0.8 kg
Wind load
Frontal: Lateral: Rearside:
Max. wind velocity
25 N (at 150 km/h) 65 N (at 150 km/h) 35 N (at 150 km/h) 200 km/h
Packing size
422 x 212 x 95 mm
Height/width/depth
310 / 55 / 190 mm
Material:
Radiator: Tin plated copper. Reflector: Weather-proof aluminum. Radome: High impact plastic, colour: Grey. All screws and nuts: Stainless steel.
Mounting:
Wall mounting: No additional mounting kit needed. For pipe mast mounting use clamps listed below (order separately).
Ice protection:
The radiating system is protected by the radome. Due to its very sturdy construction, the antenna remains operational even under icy conditions.
Grounding:
All metal parts of the antenna as well as the inner conductor are DC grounded.
8.5 mm
3
dB
10
0
Typical Horizontal Pattern
65
Dual-band F- Vertical Polarization Half-power Beam Width
900
1800
V
V
90°
90°
VPol F- 900/1800 90° 10dBi
741 880
Type No. Frequency range
900 880 – 960 MHz
1800 1710 – 1880 MHz
Polarization
Vertical
Vertical
Gain
10 dBi
10 dBi
Half-power beam width
Horizontal: Vertical:
Front-to-back ratio
Horizontal: Vertical:
90° 35°
> 18 dB
> 20 dB
50 Ω
50 Ω
< 1.7 (880 – 960 MHz) < 1.5 (890 – 960 MHz)
< 1.5 (1710 – 1880 MHz)
< –140 dBc
< –140 dBc
Impedance VSWR
90° 35°
Intermodulation IM3 (2 x 43 dBm carrier) Max. power per input
200 Watt 200 Watt (at 50 °C ambient temperature)
900 90° 180° 35°
10
3
dB
3
dB
10
0
0
Horizontal Pattern
Vertical Pattern
1800
Mechanical specifications
90°
Input
180°
Connector position* 35°
10
0
Horizontal Pattern
dB
dB
10
3 0
Vertical Pattern
Bottom or top
Weight Wind load
3
1 x 7-16 female
Max. wind velocity
2.3 kg Frontal: Lateral: Rearside:
90 N (at 150 km/h) 40 N (at 150 km/h) 110 N (at 150 km/h) 200 km/h
Packing size
604 x 172 x 72 mm
Height/width/depth
502 / 155 / 49 mm
* Inverted mounting: Connector position top: Change drain hole screw.
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
66
Summary – Directional Antennas UMTS (IMT 2000)
XPol Multi-band 1710 – 2170 MHz Type
XPol F- 1710–2170
65°
12.5dBi
XPol F- 1710 – 2170
65°
18.5dBi
XPol F- 1710– 2170
85°
17 dBi
2°T
2°T
Type No.
Frequency range [MHz]
Height [mm]
Connector position
Page
739 489
1710 – 2170
342
bottom
68
741 794
1710 – 2170
1302
bottom
69
741 987
1710 – 2170
1302
bottom
70
New Products
XPol Multi-band 1710 – 2170 MHz Adjustable Electrical Downtilt XPol F- 1710–2170
65°
18 dBi
0°–8°T
741 784
1710 – 2170
1302
bottom
71
XPol F- 1710–2170
85°
17 dBi
2°–8°T
741 989
1710 – 2170
1302
bottom
72
New Products
Please see further UMTS-antennas in sections “Omni” and “Indoor”
The following antenna concepts are in development: • XPol Single-band UMTS 1900 – 2170 MHz, 30° and 45° • XXPol Dual-band 824 – 960 / 1710 – 2170 MHz • XXPol 2-Multi-band 1710 – 2170 MHz / 1710 – 2170 MHz • XXXPol Triple-band 824 – 960 / 1710 – 1880 / 1920 – 2170 MHz • LogPer 870 – 2170 MHz
For detailed information in electronic format please following E-Mail: [email protected]
67
Multi-band F- Dual Polarization Half-power Beam Width Fixed Electrical Downtilt
1710 –2170 X 65° 2°
XPol F- 1710–2170 65° 12dBi 2°T
739 489
Type No. Frequency range 1710 – 1880 MHz
1710–2170 1850 – 1990 MHz
1920 – 2170 MHz
Polarization
+45°, –45°
+45°, –45°
+45°, –45°
Gain
2 x 11.5 dBi
2 x 12 dBi
2 x 12 dBi
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
Electrical tilt Gain-reduction in horizon Front-to-back ratio, copolar Cross polar ratio Maindirection Sector
0° ±60°
67° 32°
Horizontal: Vertical:
65° 30°
Horizontal: Vertical:
63° 28°
5°, fixed
4°, fixed
2°, fixed
typ. 0.3 dB
typ. 0.2 dB
typ. 0.1 dB
> 30 dB
> 30 dB
> 30 dB
Typically: 20 dB > 10 dB
Typically: 20 dB > 10 dB
Typically: 20 dB > 10 dB
Isolation, between ports
> 30 dB
Impedance
50 Ω
VSWR
< 1.4
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
150 Watt (at 50 °C ambient temperature)
1710 – 1880 MHz: +45°/ –45° Polarization 125°
67°
32° 10
3
dB
3
dB
10
0 0
Horizontal Pattern
Vertical Pattern 5° electr. downtilt
1850 – 1990 MHz: +45°/ –45° Polarization 120°
65°
1710 – 2170 –45°
1710 – 2170 +45°
7-16
7-16
30°
dB
3
3
dB
10
10
Mechanical specifications
0
0
Horizontal Pattern
Vertical Pattern 4° electr. downtilt
Input
2 x 7-16 female
Connector position
1920 – 2170 MHz: +45°/ –45° Polarization
Weight Wind load
115°
63° 28°
Max. wind velocity dB
3 0
Horizontal Pattern
3
dB
10
10
Bottom 2 kg Frontal: Lateral: Rearside:
35 N (at 150 km/h) 25 N (at 150 km/h) 80 N (at 150 km/h) 200 km/h
Packing size
444 x 172 x 92 mm
Height/width/depth
342 / 155 / 69 mm
0
Vertical Pattern 2° electr. downtilt
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
68
Multi-band F- Dual Polarization Half-power Beam Width Fixed Electrical Downtilt
1710 –2170 X 65° 2°
XPol F- 1710–2170 65° 18.5dBi 2°T
741 794
Type No. Frequency range 1710 – 1880 MHz
1710–2170 1850 – 1990 MHz
Polarization
+45°, –45°
+45°, –45°
+45°, –45°
Gain
2 x 17.5 dBi
2 x 18 dBi
2 x 18.5 dBi
Horizontal: 65° Vertical: 6.7°
Horizontal: 63° Vertical: 6.5°
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
67° 7°
1920 – 2170 MHz
Electrical tilt
2°, fixed
2°, fixed
2°, fixed
Sidelobe suppression for first sidelobe above horizon
> 14 dB
> 14 dB
> 14 dB
Front-to-back ratio, copolar
> 30 dB
> 30 dB
> 30 dB
Typically: 30 dB > 10 dB
Typically: 30 dB > 10 dB
Typically: 30 dB > 10 dB
Cross polar ratio Maindirection Sector
0° ±60°
Isolation, between ports
> 30 dB 50 Ω
Impedance VSWR
< 1.4
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
300 Watt (at 50 °C ambient temperature)
1710 – 1880 MHz: +45°/ –45° Polarization 125°
67° 7°
dB
3
3
dB
10
10
0 0
Horizontal Pattern
Vertical Pattern 2° electr. downtilt
1850 – 1990 MHz: +45°/ –45° Polarization 120°
1710 – 2170 –45°
1710 – 2170 +45°
7-16
7-16
65° 6.7°
dB
3
3
dB
10
10
Mechanical specifications
0
0
Horizontal Pattern
Vertical Pattern 2° electr. downtilt
Input
2 x 7-16 female
Connector position
1920 – 2170 MHz: +45°/ –45° Polarization
Weight Wind load
115°
63° 6.5°
Max. wind velocity dB
3 0
Horizontal Pattern
3
dB
10
10
Bottom 6.6 kg Frontal: Lateral: Rearside:
130 N (at 150 km/h) 110 N (at 150 km/h) 310 N (at 150 km/h) 200 km/h
Packing size
1404 x 172 x 92 mm
Height/width/depth
1302 / 155 / 69 mm
0
Vertical Pattern 2° electr. downtilt
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
69
Multi-band F- Dual Polarization Half-power Beam Width Fixed Electrical Downtilt
1710 –2170 X 85° 2°
XPol F- 1710–2170 85° 17dBi 2°T
741 987
Type No. Frequency range 1710 – 1880 MHz
1710–2170 1850 – 1990 MHz
1920 – 2170 MHz
Polarization
+45°, –45°
+45°, –45°
+45°, –45°
Gain
2 x 16.5 dBi
2 x 16.8 dBi
2 x 17 dBi
Horizontal: 85° Vertical: 6.7°
Horizontal: 85° Vertical: 6.5°
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
90° 7°
Electrical tilt
2°, fixed
2°, fixed
2°, fixed
Sidelobe suppression for first sidelobe above horizon
> 14 dB
> 14 dB
> 14 dB
Front-to-back ratio, copolar
> 25 dB
> 25 dB
> 25 dB
Typically: 20 dB > 10 dB
Typically: 20 dB > 10 dB
Typically: 20 dB > 10 dB
Cross polar ratio Maindirection Sector
0° ±60°
Isolation, between ports
> 30 dB 50 Ω
Impedance VSWR
< 1.4
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
300 Watt (at 50 °C ambient temperature)
1710 – 1880 MHz: +45°/ –45° Polarization 90° 170°
7°
10
3
0
dB
3
dB
10
0
Horizontal Pattern
Vertical Pattern 2° electr. downtilt
1850 – 1990 MHz: +45°/ –45° Polarization 85°
1710 – 2170 –45°
1710 – 2170 +45°
7-16
7-16
170°
6.7°
10
3
0
dB
3
dB
10
Mechanical specifications
0
Horizontal Pattern
Vertical Pattern 2° electr. downtilt
Input
2 x 7-16 female
Connector position
1920 – 2170 MHz: +45°/ –45° Polarization
Weight Wind load
85° 170°
6.5°
Max. wind velocity 10
0
Horizontal Pattern
3
dB
3
dB
10
Bottom 6 kg Frontal: Lateral: Rearside:
130 N (at 150 km/h) 110 N (at 150 km/h) 310 N (at 150 km/h) 200 km/h
Packing size
1404 x 172 x 92 mm
Height/width/depth
1302 / 155 / 69 mm
0
Vertical Pattern 2° electr. downtilt
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
70
Multi-band F- Dual Polarization Half-power Beam Width Adjust. Electrical Downtilt
1710 –2170 X 65° 0°– 8°
XPol F- 1710–2170 65° 18dBi 0°–8°T
741 784
Type No. Frequency range 1710 – 1880 MHz
1710–2170 1850 – 1990 MHz
1920 – 2170 MHz
Polarization
+45°, –45°
+45°, –45°
+45°, –45°
Gain
2 x 17.5 dBi
2 x 17.7 dBi
2 x 18 dBi
Horizontal: 65° Vertical: 6.7°
Horizontal: 63° Vertical: 6.5°
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
67° 7°
Electrical tilt
0°– 8° continously adjustable
0°– 8° continously adjustable
0°– 8° continously adjustable
Sidelobe suppression for first sidelobe above horizon
0° ... 2° ... 5° ... 8°T 16 ... 16 ... 14 .... 14 dB
0° ... 2° ... 5° ... 8°T 18 ... 18 ... 16 ... 14 dB
0° ... 2° ... 5° ... 8°T 18 ... 18 ... 16 ... 14 dB
Front-to-back ratio, copolar
> 30 dB
> 30 dB
> 30 dB
Typically: 25 dB > 10 dB
Typically: 25 dB > 10 dB
Typically: 25 dB > 10 dB
> 30 dB
> 30 dB
> 30 dB
Cross polar ratio Maindirection Sector
0° ±60°
Isolation, between ports Impedance
50 Ω
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< 1.5
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
300 Watt (at 50 °C ambient temperature)
1710 – 1880 MHz: +45°/ –45° Polarization 125°
67°
7°
dB
3
3
dB
10
10
0 0
Horizontal Pattern
Vertical Pattern 0°– 8° electrical downtilt continously adjustable
1850 – 1990 MHz: +45°/ –45° Polarization 120°
1710 – 2170 –45°
1710 – 2170 +45°
7-16
7-16
65° 6.7°
10
3
Mechanical specifications dB
3
dB
10
Input
Horizontal Pattern
Vertical Pattern 0°– 8° electrical downtilt continously adjustable
1920 – 2170 MHz: +45°/ –45° Polarization
Connector position Adjustment mechanism
120°
63° 6.5°
Max. wind velocity dB
0
Horizontal Pattern
3
dB
10
10
Bottom 1x, Position bottom continously adjustable
Weight Wind load
3
2 x 7-16 female
0
0
7 kg Frontal: Lateral: Rearside:
130 N (at 150 km/h) 110 N (at 150 km/h) 310 N (at 150 km/h) 200 km/h
Packing size
1404 x 172 x 92 mm
Height/width/depth
1302 / 155 / 69 mm
0
Vertical Pattern 0°– 8° electrical downtilt continously adjustable
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
71
Multi-band F- Dual Polarization Half-power Beam Width Adjust. Electrical Downtilt
1710 –2170 X 85° 2°– 8°
XPol F- 1710–2170 85° 17dBi 2°–8°T
741 989
Type No. Frequency range 1710 – 1880 MHz
1710–2170 1850 – 1990 MHz
1920 – 2170 MHz
Polarization
+45°, –45°
+45°, –45°
+45°, –45°
Gain
2 x 16.5 dBi
2 x 16.8 dBi
2 x 17 dBi
Horizontal: 85° Vertical: 6.7°
Horizontal: 85° Vertical: 6.5°
2°– 8° continously adjustable
2°– 8° continously adjustable
2°– 8° continously adjustable
Sidelobe suppression for first sidelobe above horizon
> 14 dB
> 14 dB
> 14 dB
Front-to-back ratio, copolar
> 25 dB
> 25 dB
> 25 dB
Typically: 20 dB > 10 dB
Typically: 20 dB > 10 dB
Typically: 20 dB > 10 dB
> 30 dB
> 30 dB
> 30 dB
Half-power beam width Copolar +45°/ –45°
Horizontal: Vertical:
Electrical tilt
Cross polar ratio Maindirection Sector
0° ±60°
Isolation, between ports
90° 7°
Impedance
50 Ω
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< 1.4
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power per input
300 Watt (at 50 °C ambient temperature)
1710 – 1880 MHz: +45°/ –45° Polarization 90° 170°
7° 10
3
0
dB
3
dB
10
0
Horizontal Pattern
Vertical Pattern 2°– 8° electrical downtilt continously adjustable
1850 – 1990 MHz: +45°/ –45° Polarization
1710 – 2170 –45°
1710 – 2170 +45°
7-16
7-16
85° 170°
6.7°
10
Mechanical specifications
3
0
dB
3
dB
10
Input
Horizontal Pattern
Vertical Pattern 2°– 8° electrical downtilt continously adjustable
1920 – 2170 MHz: +45°/ –45° Polarization
Connector position Adjustment mechanism
170°
6.5°
Max. wind velocity 10
0
Horizontal Pattern
3
dB
dB
10
Bottom 1x, Position bottom continously adjustable
Weight Wind load
85°
3
2 x 7-16 female
0
6 kg Frontal: Lateral: Rearside:
130 N (at 150 km/h) 110 N (at 150 km/h) 310 N (at 150 km/h) 200 km/h
Packing size
1404 x 172 x 92 mm
Height/width/depth
1302 / 155 / 69 mm
0
Vertical Pattern 2°– 8° electrical downtilt continously adjustable
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
72
Summary – Directional Antennas Vertical Polarization 800/900 Vertical Polarization – 800/900 Type
Type No.
Frequency range [MHz]
Height [mm]
Connector position
Page
VPol
900
20°
16.5 dBi
735 727
870 – 960
500
bottom
76
VPol Par
900
36°
14.5 dBi
728 685
870 – 960
650
bottom
77
VPol Par
900
36°
17.5 dBi
728 684
870 – 960
1290
bottom
78
VPol Par
900
36°
20 dBi
K 73 45 64 7
870 – 960
2250
bottom
79
VPol LogPer
800/900
51°
12 dBi
K 73 22 67
790 – 960
300
bottom
80
VPol LogPer
450/900 68°/60°10.5/11.5 dBi
739 990
440 – 512 824 – 960
1160
bottom
81
VPol VPol
900 900
65° 65°
9 dBi 9 dBi
730 676 730 677
860 – 960 860 – 960
264 264
bottom or top bottom or top
82 82
VPol VPol
900 800/900
65° 65°
12.5 dBi 12.5 dBi
730 360 732 447
870 – 960 806 – 960
654 654
bottom bottom
82 82
VPol VPol VPol VPol
900 800/900 900 900
65° 65° 65° 65°
15.5 15.5 15.5 15
dBi dBi dBi dBi
6°T 12°T
730 732 732 737
368 448 691 735
870 806 870 880
– – – –
960 960 960 960
1294 1294 1294 1294
bottom bottom bottom bottom
83 83 83 84
VPol VPol VPol VPol VPol
900 800/900 900 900 900
65° 65° 65° 65° 65°
17 17 17 17 17
dBi dBi dBi dBi dBi
4.5°T 6°T 9°T
730 691 738 407 735 811 732 690 737 547
870 824 870 870 870
– – – – –
960 960 960 960 960
1934 1934 1934 1934 1934
rearside rearside rearside rearside rearside
84 84 85 85 86
VPol
900
65°
18 dBi
739 854
870 – 960
2254
rearside
86
900 800/900 900 900
65° 65° 65° 65°
730 732 732 737
870 806 870 870
2574 2574 2574 2574
rearside rearside bottom bottom
87 87 88 88
VPol VPol VPol VPol
18.5 18.5 18.5 18.5
dBi dBi dBi dBi
6°T 9°T
376 433 689 548
– – – –
960 960 960 960
73
Summary – Directional Antennas Vertical Polarization 800/900 Vertical Polarization – 800/900 Type
Type No.
Frequency range [MHz]
Height [mm]
Connector position
Page
VPol F- VPol F-
900 900
90° 90°
7.5 dBi 7.5 dBi
736 622 736 854
872 – 960 872 – 960
262 262
bottom or top bottom or top
89 89
VPol F-
900
90°
10 dBi
736 855
872 – 960
502
bottom or top
89
VPol F-
900
90°
12.5 dBi
736 668
872 – 960
982
bottom or top
90
VPol F- VPol VPol
900 900 800/900
90° 90° 90°
14 dBi 14 dBi 14 dBi
736 858 730 370 732 480
872 – 960 870 – 960 806 – 960
1222 1294 1294
bottom or top bottom bottom
90 91 91
VPol VPol VPol VPol VPol
F- F-
900 800/900 900 900 900
90° 90° 90° 90° 90°
15.5 15.5 15.5 15.5 15.5
732 742 736 736 741
870 806 872 872 870
960 960 960 960 960
1934 1934 1942 1942 1934
rearside rearside bottom or top bottom rearside
91 92 93 93 94
VPol F-
900
90°
16.5 dBi
736 866
872 – 960
2422
bottom or top
95
VPol VPol VPol
900 800/900 900
90° 90° 90°
17 dBi 17 dBi 17 dBi
730 378 739 418 737 549
870 – 960 806 – 960 870 – 960
2574 2574 2574
rearside rearside rearside
96 96 97
VPol
900
105°
16.5 dBi
730 380
870 – 960
2574
rearside
98
VPol
900
120°
13 dBi
730 374
870 – 960
1294
bottom
99
VPol
900
120°
14.5 dBi
737 385
870 – 960
1934
rearside
99
VPol
900
120°
15.5 dBi
739 856
870 – 960
2254
rearside
100
VPol VPol
900 800/900
120° 120°
16 dBi 16 dBi
730 382 736 618
870 – 960 806 – 960
2574 2574
rearside rearside
100 100
VPol F-
900
160°
11 dBi
736 900
872 – 960
982
bottom or top
101
VPol F-
900
160°
14 dBi
736 902
872 – 960
1942
bottom or top
101
VPol F-
900
160°
15 dBi
737 849
880 – 960
2422
bottom
102
dBi dBi dBi dBi dBi
5°T 6°T
6°T
2°T
967 150 863 864 067
– – – – –
Additional versions on request
74
Summary – Directional Antennas Vertical Polarization 800/900 Adjustable Electrical Downtilt Type VPol VPol VPol VPol VPol VPol
Type No. F-
900 800/900 900 900 900 900
65° 65° 90° 90° 105° 160°
15 15 13.5 13.5 13 11.5
dBi dBi dBi dBi dBi dBi
3°–15°T 3°–15°T 3°–15°T 4°–14°T 3°–15°T 3°–15°T
6°T
737 741 736 738 736 738
906 493 077 580 078 018
Frequency range [MHz] 870 824 870 880 870 870
– – – – – –
Height [mm]
Connector position
Page
960 960 960 960 960 960
1294 1294 1294 1440 1294 1294
bottom bottom bottom bottom bottom bottom
103 103 104 105 106 107
738 020 738 021
872 – 960 872 – 960
2422 2422
bottom bottom
108 108
738 144
872 – 960
3041
bottom
109
Multi-unit s VPol 2-F- VPol 2-F-
900 900
90° 90°
14 dBi 14 dBi
VPol 3-F-
900
90°
12.5 dBi
Additional versions on request
75
Vertical Polarization Half-power Beam Width
900 V 20°
VPol 900 20° 16.5dBi
735 727
Type No. Input Frequency range VSWR Gain Impedance Polarization Front-to-back-ratio Half-power Beam Width Max. power Weight Wind load
7-16 female 870 – 960 MHz < 1.3 16.5 dBi 50 Ω Vertical > 24 dB H-plane: 20°/ E-plane: 33° 500 Watt (at 50 °C ambient temperature) 10 kg Frontal: 500 N (at 150 km/h) Lateral: 110 N (at 150 km/h) Rearside: 715 N (at 150 km/h) 230 km/h 1062 x 562 x 275 mm 492 / 992 / 190 mm
Max. wind velocity Packing size Height/width/depth Material:
Radiator: Aluminum. Reflector screen: Weather-proof aluminum. Radome: Fiberglass, colour: White. All screws and nuts: Stainless steel.
Ice protection:
Due to the very sturdy antenna construction and the protection of the radiating system by the radome, the antenna remains operational even under icy conditions.
Grounding:
All metal parts of the antenna as well as the inner conductor are DC grounded.
Accessories (order separately) Type No. 14 14 14 14
02 03 04 05
2 2 2 2
clamps clamps clamps clamps
Remarks Mast: 60 – 115 mm diameter Mast: 115 – 210 mm diameter Mast: 210 – 380 mm diameter Mast: 380 – 521 mm diameter
33°
20°
10
3
10
0
Horizontal Pattern
3
dB
61 61 61 61
dB
K K K K
Description
K 61 14 03
0
Vertical Pattern
76
Parabolic Vertical Polarization Half-power Beam Width
900 V 36°
VPol Par 900 36° 14.5dBi
728 685
Type No. Input Frequency range VSWR Gain Impedance Polarization Front-to-back ratio Half-power Beam Width Max. power Weight Wind load
7-16 female 870 – 960 MHz < 1.3 14.5 dBi 50 Ω Vertical > 25 dB H-plane: 36°/ E-plane: 26° 400 Watt (at 50 °C ambient temperature) 14.5 kg Frontal: 275 N (at 150 km/h) Lateral: 200 N (at 150 km/h) Rearside: 275 N (at 150 km/h) 200 km/h 820 x 640 x 465 mm 650 / 591 / 406 mm
Max. wind velocity Packing size Height/width/depth Material:
Radiator: Weather-proof aluminum. Reflector screen: Weather-proof aluminum. Radome: Fiberglass, colour: Grey. All screws and nuts: Stainless steel.
Ice protection:
Due to the very sturdy antenna construction and the protection of the radiating system by the radome, the antenna remains operational even under icy conditions.
Grounding:
All metal parts of the antenna are DC grounded. The inner conductor is coupled capacitively.
760
700
650
429
∅11
Accessories (order separately) ∅13
733 736 K 61 14 03 K 61 14 04 K 61 14 05 733 695
2 2 2 2 1
clamps clamps clamps clamps downtilt kit
Remarks Mast: 50 – 125 mm diameter Mast: 115 – 210 mm diameter Mast: 210 – 380 mm diameter Mast: 380 – 521 mm diameter Downtilt angle: 0° – 33° Use the downtilt kit together with 2 clamps suitable for the mast diameter.
36°
10
140
Description
591
Type No.
406
26°
3 0
Horizontal Pattern
3
dB
dB
10
K 61 14 03
0
Vertical Pattern
77
Parabolic Vertical Polarization Half-power Beam Width
900 V 36°
VPol Par 900 36° 17.5dBi
728 684
Type No. Input Frequency range VSWR Gain Impedance Polarization Front-to-back ratio Half-power Beam Width Max. power Weight Wind load
7-16 female 870 – 960 MHz < 1.3 17.5 dBi 50 Ω Vertical > 30 dB H-plane: 36°/ E-plane: 13° 400 Watt (at 50 °C ambient temperature) 21 kg Frontal: 550 N (at 150 km/h) Lateral: 350 N (at 150 km/h) Rearside: 550 N (at 150 km/h) 200 km/h 1460 x 640 x 465 mm 1290 / 591 / 406 mm
Max. wind velocity Packing size Height/width/depth Material:
Radiator: Weather-proof aluminum. Reflector screen: Weather-proof aluminum. Radome: Fiberglass, colour: Grey. All screws and nuts: Stainless steel.
Ice protection:
Due to the very sturdy antenna construction and the protection of the radiating system by the radome, the antenna remains operational even under icy conditions.
Grounding:
All metal parts of the antenna are DC grounded. The inner conductor is coupled capacitively.
1400
1340
1290
429
Accessories (order separately)
733 736 K 61 14 03 K 61 14 04 K 61 14 05 733 695
2 2 2 2 1
clamps clamps clamps clamps downtilt kit
Remarks Mast: 50 – 125 mm diameter Mast: 115 – 210 mm diameter Mast: 210 – 380 mm diameter Mast: 380 – 521 mm diameter Downtilt angle: 0° – 16° Use the downtilt kit together with 2 clamps suitable for the mast diameter.
∅11
∅13 140
Description
591
Type No.
406
36°
13°
10
3 0
Horizontal Pattern
3
dB
dB
10
0
Vertical Pattern K 61 14 03
78
Parabolic Vertical Polarization Half-power Beam Width
900 V 36°
VPol Par 900 36° 20dBi
K 73 45 64 7
Type No. Input Frequency range VSWR Gain Impedance Polarization Front-to-back ratio Half-power Beam Width Max. power Weight Wind load
7-16 female 870 – 960 MHz < 1.3 20 dBi 50 Ω Vertical > 30 dB H-plane: 36°/ E-plane: 8° 500 Watt (at 50 °C ambient temperature) 30 kg Frontal: 950 N (at 150 km/h) Lateral: 600 N (at 150 km/h) Rearside: 950 N (at 150 km/h) 200 km/h 2420 x 640 x 465 mm 2250 / 591 / 406 mm
Max. wind velocity Packing size Height/width/depth Material:
Radiator: Weather-proof aluminum. Reflector screen: Weather-proof aluminum. Radome: Fiberglass, colour: Grey. All screws and nuts: Stainless steel.
Ice protection:
Due to the very sturdy antenna construction and the protection of the radiating system by the radome, the antenna remains operational even under icy conditions.
Grounding:
All metal parts of the antenna are DC grounded. The inner conductor is coupled capacitively.
2360
2300
2250
429
Accessories (order separately)
733 736 K 61 14 03 K 61 14 04 K 61 14 05 733 695
2 2 2 2 1
clamps clamps clamps clamps downtilt kit
Remarks Mast: 50 – 125 mm diameter Mast: 115 – 210 mm diameter Mast: 210 – 380 mm diameter Mast: 380 – 521 mm diameter Downtilt angle: 0° – 10° Use the downtilt kit together with 2 clamps suitable for the mast diameter.
∅11
∅13 140
Description
591
Type No.
406
36°
8°
10
3 0
Horizontal Pattern
3
dB
dB
10
0
Vertical Pattern K 61 14 03
79
Logarithmic periodic Vertical Polarization Half-power Beam Width
800/900 V 51°
LogPer 800/900 51° 12dBi
K 73 22 67
Type No. Input Frequency range VSWR Gain Impedance Polarization Side-lobe supression Front-to-back ratio Half-power Beam Width Max. power Weight Wind load
7-16 female 790 – 960 MHz < 1.4 12 dBi 50 Ω Vertical > 25 dB > 30 dB H-plane: 51°/ E-plane: 45° 500 Watt (at 50 °C ambient temperature) 6.3 kg Frontal: 20 N (at 150 km/h) Lateral: 260 N (at 150 km/h) Rearside: 30 N (at 150 km/h) 200 km/h 1000 x 360 x 175 mm 300 / 155 / 785 mm
Max. wind velocity Packing size Height/width/depth Material:
Radiator: Weather-proof aluminum. Reflector screen: Weather-proof aluminum. Radome: Fiberglass, colour: Grey. All screws and nuts: Stainless steel.
Mounting:
The antenna can be mounted on tubular mast with a diameter of 30 – 70 mm with supplied clamps.
Ice protection:
Due to the very sturdy antenna construction and the protection of the radiating system by the radome, the antenna remains operational even under icy conditions.
Grounding:
All metal parts of the antenna as well as the inner conductor are DC grounded.
51°
0
Horizontal Pattern
3
dB
3
10
dB
10
45°
0
Vertical Pattern
80
Logarithmic periodic Vertical Polarization Half-power Beam Width
450
900
V
V
68°
60°
LogPer 450/900 68/60° 10.5/11.5dBi
739 990
Type No. Input Frequency range VSWR Gain Impedance Polarization Half-power beam width H-plane E-plane Front-to-back ratio Max. power Weight Wind load Max. wind velocity Packing size Length/width/depth
7-16 female 440 – 512 MHz 824 – 960 MHz < 1.4 10.5 dBi 11.5 dBi 50 Ω Vertical 68° 60° 54° 48° > 23 dB > 25 dB 100 Watt (at 50 °C ambient temperature) 9 kg Frontal: 55 N (at 150 km/h) Lateral: 440 N (at 150 km/h) 180 km/h 1172 x 372 x 225 mm 1160 / 350 / 170 mm
Material:
Radiator: Weather-proof aluminum. Radome: Fiberglass, colour: Grey. All screws and nuts: Stainless steel.
Mounting:
The antenna can be mounted on tubular mast with a diameter of 48 – 115 mm with supplied clamps.
Ice protection:
The radiation system ist protected by the radome. Due its very sturdy construction, the antenna remains operational even under icy conditions.
Grounding:
All metal parts of the antenna including the inner conductor are DC grounded.
440 – 512 MHz
824 – 960 MHz 60°
68°
54°
0
Radiation Pattern in E-plane
0
Radiation Pattern in H-plane
3
10
0
Radiation Pattern in E-plane
3
dB
3
dB
dB
3
10
10
dB
10
48°
0
Radiation Pattern in H-plane
81
Eurocell Vertical Polarization Half-power Beam Width
800/900 V 65°
VPol 900 65° 9dBi Type No.
730 676
Frequency range
730 677
Polarization
65°
120°
860 – 960 MHz Vertical
Gain
9 dBi H-plane: 65° E-plane: 70°
Front-to-back ratio
> 25 dB (890 – 960 MHz) > 20 dB (860 – 890 MHz)
Impedance
50 Ω
VSWR
< 1.3
Intermodulation IM3 (2 x 43 dBm carrier)
Input
< –150 dBc
70°
350 Watt (at 50 °C ambient temperature) 7-16 female
Connector position
N female
10
Bottom or top
Weight Wind load
0
Horizontal Pattern
3
1.2 kg Frontal: 40 N (at 150 km/h)
Max. wind velocity
230 km/h
Height/width/depth
264 / 258 / 103 mm
dB
Max. power
3
dB
10
Half-power beam width
0
Vertical Pattern
VPol 800/900 65° 12.5dBi
730 360
732 447
Frequency range
870 – 960 MHz
806 – 960 MHz
Polarization
Vertical
Vertical
Gain
12.5 dBi
12.5 dBi (870 – 960 MHz) 12 dBi (806 – 870 MHz)
Half-power beam width
H-plane: 65° E-plane: 27°
120°
65°
10
3
dB
Type No.
0
Front-to-back ratio
> 25 dB 50 Ω
Impedance
Intermodulation IM3 (2 x 43 dBm carrier) Max. power Input Connector position Weight Wind load
< 1.3
< 1.5 < –150 dBc 27°
500 Watt (at 50 °C ambient temperature) 7-16 female
10
Bottom 3 kg Frontal: 110 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
654 / 258 / 103 mm
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
3
dB
VSWR
Horizontal Pattern
0
Vertical Pattern
82
Eurocell Vertical Polarization Half-power Beam Width
800/900 V 65°
VPol 800/900 65° 15.5dBi
730 368
732 448
Frequency range
870 – 960 MHz
806 – 960 MHz
Polarization
Vertical
Vertical
Gain
15.5 dBI
15.5 dBi (870 – 960 MHz) 15 dBi (806 – 870 MHz)
Half-power beam width
H-plane: 65° E-plane: 13°
120°
65°
10
3
dB
Type No.
0
Front-to-back ratio
> 25 dB 50 Ω
Impedance < 1.3
Intermodulation IM3 (2 x 43 dBm carrier) Max. power
< –150 dBc 13°
500 Watt (at 50 °C ambient temperature)
Input
7-16 female
Connector position
10
Bottom
Weight Wind load
< 1.5
6 kg Frontal: 220 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1294 / 258 / 103 mm
3
dB
VSWR
Horizontal Pattern
0
Vertical Pattern
VPol 900 65° 15.5dBi 6°T Type No.
732 691
Frequency range
870 – 960 MHz
Polarization Gain
120°
65°
Vertical 15.5 dBi
Front-to-back ratio Impedance VSWR Intermodulation IM3 (2 x 43 dBm carrier) Max. power Input Connector position
6°, fixed > 25 dB
3 0
Horizontal Pattern
50 Ω < 1.3 < –150 dBc 13°
500 Watt (at 50 °C ambient temperature) 7-16 female
10
Bottom 3
Weight Wind load
6 kg Frontal: 220 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1294 / 258 / 103 mm
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
dB
Electrical downtilt
H-plane: 65° E-plane: 13°
dB
10
Half-power beam width
0
Vertical Pattern 6° electr. downtilt
83
Eurocell Vertical Polarization Half-power Beam Width
900 V 65°
VPol 900 65° 15dBi 12°T Type No.
737 735
Frequency range
880 – 960 MHz
Polarization
Vertical
Gain
15 dBi
120°
65°
H-plane: 65° E-plane: 17°
Electrical downtilt
12°, fixed
Front-to-back ratio
Horizontal Pattern
> 25 dB 50 Ω
Impedance VSWR
< 1.3
Intermodulation IM3 (2 x 43 dBm carrier) Max. power
0
> 20 dB (0°... 40° above horizon)
< –150 dBc
17°
500 Watt (at 50 °C ambient temperature)
Input
10
7-16 female 3
Connector position
dB
Sidelobe suppression
3
dB
10
Half-power beam width
Bottom 0
Weight
6 kg
Wind load
Frontal: 220 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1294 / 258 / 103 mm
Vertical Pattern 12° electr. downtilt
VPol 800/900 65° 17dBi Type No.
730 691
738 407
Frequency range
870 – 960 MHz
824 – 960 MHz
Polarization
120°
65°
Vertical
Gain
17 dBi H-plane: 65° E-plane: 8.5°
Front-to-back ratio
Intermodulation IM3 (2 x 43 dBm carrier) Max. power
0
50 Ω
Impedance VSWR
3
> 25 dB
< 1.3
dB
10
Half-power beam width
Horizontal Pattern < 1.5
< –150 dBc 500 Watt (at 50 °C ambient temperature) 8.5°
Connector position Weight
7-16 female Rearside
10
9 kg 3
Wind load
dB
Input
Frontal: 340 N (at 150 km/h) 0
Max. wind velocity
200 km/h
Height/width/depth
1934 / 258 / 103 mm
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
Vertical Pattern
84
Eurocell Vertical Polarization Half-power Beam Width
900 V 65°
VPol 900 65° 17dBi 4.5°T Type No.
735 811
Frequency range
870 – 960 MHz
Polarization
Vertical
Gain
17 dBi
120°
65°
H-plane: 65° E-plane: 8.5°
Electrical downtilt
4.5°, fixed
Front-to-back ratio
> 25 dB
Impedance
50 Ω
VSWR
< 1.3
Intermodulation IM3 (2 x 43 dBm carrier)
0
Horizontal Pattern
< –150 dBc 8.5°
500 Watt (at 50 °C ambient temperature)
Input
7-16 female
Connector position
10
Rearside 3
Weight
dB
Max. power
3
dB
10
Half-power beam width
9 kg 0
Wind load
Frontal: 340 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1934 / 258 / 103 mm
Vertical Pattern 4.5° electr. downtilt
VPol 900 65° 17dBi 6°T Type No.
732 690
Frequency range
870 – 960 MHz
Polarization Gain
120°
65°
Vertical 17 dBi
Electrical downtilt Front-to-back ratio Impedance VSWR Intermodulation IM3 (2 x 43 dBm carrier)
H-plane: 65° E-plane: 8.5° 6°, fixed > 25 dB
3
dB
10
Half-power beam width
0
Horizontal Pattern
50 Ω < 1.3 < –150 dBc 8.5°
Input Connector position
500 Watt (at 50 °C ambient temperature) 7-16 female
10
Rearside 3
Weight
dB
Max. power
9 kg 0
Wind load
Frontal: 340 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1934 / 258 / 103 mm
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
Vertical Pattern 6° electr. downtilt
85
Eurocell Vertical Polarization Half-power Beam Width
900 V 65°
VPol 900 65° 17dBi 9°T Type No.
737 547
Frequency range
870 – 960 MHz
Polarization
Vertical
Gain
17 dBi
120°
65°
H-plane: 65° E-plane: 8.5°
Electrical downtilt
9°, fixed
Front-to-back ratio
> 25 dB
Impedance
50 Ω
VSWR
< 1.3
Max. power Input Connector position
0
Horizontal Pattern
< –150 dBc 9°
500 Watt (at 50 °C ambient temperature) 7-16 female
10
Rearside 3
Weight Wind load
9 kg Frontal: 340 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1934 / 258 / 103 mm
dB
Intermodulation IM3 (2 x 43 dBm carrier)
3
dB
10
Half-power beam width
0
Vertical Pattern 9° electr. downtilt
VPol 900 65° 18dBi Type No.
739 854
Frequency range
870 – 960 MHz
Polarization Gain
120°
65°
Vertical 18 dBi
Front-to-back ratio
H-plane: 65° E-plane: 7.5° > 25 dB
Impedance
50 Ω
VSWR
< 1.3
Intermodulation IM3 (2 x 43 dBm carrier) Max. power
3
dB
10
Half-power beam width
0
Horizontal Pattern
< –150 dBc 400 Watt (at 50 °C ambient temperature) 7.5°
Connector position Weight
7-16 female Rearside
10
10.5 kg 3
Wind load
dB
Input
Frontal: 400 N (at 150 km/h) 0
Max. wind velocity
180 km/h
Height/width/depth
2254 / 258 / 103 mm
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
Vertical Pattern
86
Eurocell Vertical Polarization Half-power Beam Width
900 V 65°
VPol 900 65° 18.5dBi Type No.
730 376
Frequency range
870 – 960 MHz
Polarization
Vertical
Gain
18.5 dBi
120°
65°
H-plane: 65° E-plane: 6.5°
Front-to-back ratio
> 25 dB 50 Ω
Impedance VSWR
0
Horizontal Pattern
< 1.3
Intermodulation IM3 (2 x 43 dBm carrier) Max. power
3
dB
10
Half-power beam width
< –150 dBc 500 Watt (at 50 °C ambient temperature) 6.5°
7-16 female
Connector position
Rearside
Weight
10
12 kg 3
Wind load
dB
Input
Frontal: 460 N (at 150 km/h) 0
Max. wind velocity
200 km/h
Height/width/depth
2574 / 258 / 103 mm
Vertical Pattern
VPol 800/900 65° 18.5dBi Type No.
732 433
Frequency range
806 – 960 MHz
Gain Half-power beam width
65°
Vertical 18.5 dBi (870 – 960 MHz) 18 dBi (806 – 870 MHz) H-plane: 65° E-plane: 6.5°
10
3
dB
Polarization
120°
0
Impedance VSWR Intermodulation IM3 (2 x 43 dBm carrier) Max. power Input Connector position Weight Wind load
> 25 dB
Horizontal Pattern
50 Ω < 1.5 < –150 dBc 6.5°
500 Watt (at 50 °C ambient temperature) 7-16 female
10
Rearside 12 kg Frontal: 460 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
2574 / 258 / 103 mm
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
3
dB
Front-to-back ratio
0
Vertical Pattern
87
Eurocell Vertical Polarization Half-power Beam Width
900 V 65°
VPol 900 65° 18.5dBi 6°T
732 689
Frequency range
870 – 960 MHz
Polarization
Vertical
Gain
18.5 dBi
Half-power beam width
H-plane: 65° E-plane: 6.5°
Electrical downtilt
6°, fixed
Front-to-back ratio
> 25 dB
Impedance
50 Ω
VSWR
< 1.3
Intermodulation IM3 (2 x 43 dBm carrier)
10
3 0
Horizontal Pattern
< –150 dBc 500 Watt (at 50 °C ambient temperature)
Input
7-16 female
Connector position
6.5°
Rearside
Weight Wind load
65°
12 kg Frontal: 460 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
2574 / 258 / 103 mm
10
3
dB
Max. power
120°
dB
Type No.
0
Vertical Pattern 6° electr. downtilt
VPol 900 65° 18.5dBi 9°T Type No.
737 548
Frequency range
870 – 960 MHz
Half-power beam width
Vertical 18.5 dBi H-plane: 65° E-plane: 6.5°
Electrical downtilt
9°, fixed
Front-to-back ratio
> 30 dB
Impedance VSWR Intermodulation IM3 (2 x 43 dBm carrier) Max. power Input Connector position Weight Wind load
50 Ω
10
3
dB
Gain
65°
0
Horizontal Pattern
< 1.3 < –150 dBc 500 Watt (at 50 °C ambient temperature) 7-16 female
6,5°
Rearside 12 kg Frontal: 460 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
2574 / 258 / 103 mm
10
3
dB
Polarization
120°
0
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
Vertical Pattern 9°electr. downtilt
88
F- Vertical Polarization Half-power Beam Width
900 V 90°
VPol F- 900 90° 7.5dBi
Frequency range
736 854 Vertical
Gain
7.5 dBi
Half-power beam width
H-plane: 90° E-plane: 70°
Front-to-back ratio
10 3
> 20 dB
0
50 Ω
Impedance VSWR
Horizontal Pattern
< 1.5
Intermodulation IM3 (2 x 43 dBm carrier) Max. power
180°
872 – 960 MHz
Polarization
90°
dB
736 622
< –150 dBc 70°
350 Watt (at 50 °C ambient temperature)
Input
7-16 female
Connector position
N female
Bottom or top
Weight
10
1.5 kg 3
Wind load
dB
Type No.
Frontal: 45 N (at 150 km/h) 0
Max. wind velocity
200 km/h
Height/width/depth
262 / 155 / 49 mm
Vertical Pattern
VPol F- 900 90° 10dBi
Polarization Gain Half-power beam width Front-to-back ratio
872 – 960 MHz Vertical 10 dBi H-plane: 90° E-plane: 36° > 20 dB
Impedance
50 Ω
VSWR
< 1.4
Intermodulation IM3 (2 x 43 dBm carrier) Max. power Input Connector position Weight Wind load
90° 180°
10 3
dB
Frequency range
736 855
0
Horizontal Pattern
< –150 dBc 400 Watt (at 50 °C ambient temperature)
36°
7-16 female Bottom or top 2.3 kg Frontal: 90 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
502 / 155 / 49 mm
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
10
3
dB
Type No.
0
Vertical Pattern
89
F- Vertical Polarization Half-power Beam Width
900 V 90°
VPol F- 900 90° 12.5dBi
736 668
Frequency range
872 – 960 MHz
Polarization
Vertical
Gain
12.5 dBi
Half-power beam width
H-plane: 90° E-plane: 18°
Front-to-back ratio
> 20 dB 50 Ω
Impedance VSWR
180°
10 3 0
Horizontal Pattern
< 1.3
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc 400 Watt (at 50 °C ambient temperature)
Input
18°
7-16 female
Connector position
Bottom or top
Weight
10
3.8 kg 3
Wind load
Frontal: 180 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
982 / 155 / 49 mm
dB
Max. power
90°
dB
Type No.
0
Vertical Pattern
VPol F- 900 90° 14dBi
Polarization Gain Half-power beam width Front-to-back ratio
872 – 960 MHz Vertical 14 dBi H-plane: 90° E-plane: 14° > 20 dB
Impedance
50 Ω
VSWR
< 1.3
Intermodulation IM3 (2 x 43 dBm carrier) Max. power Input Connector position Weight Wind load
90° 180°
10 3
dB
Frequency range
736 858
0
Horizontal Pattern
< –150 dBc 400 Watt (at 50 °C ambient temperature)
14°
7-16 female Bottom or top 4.6 kg Frontal: 230 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1222 / 155 / 49 mm
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
10
3
dB
Type No.
0
Vertical Pattern
90
Eurocell Vertical Polarization Half-power Beam Width
800/900 V 90°
VPol 800/900 90° 14dBi
730 370
732 480
Frequency range
870 – 960 MHz
806 – 960 MHz
Polarization
Vertical
Vertical
Gain
14 dBi
14 dBi (870 – 960 MHz) 13.5 dBi (806 – 870 MHz)
Half-power beam width
H-plane: 90° E-plane: 13°
90° 180°
10 3
dB
Type No.
0
Front-to-back ratio
> 23 dB 50 Ω
Impedance VSWR
< 1.3
Intermodulation IM3 (2 x 43 dBm carrier)
< 1.4 < –150 dBc 13°
500 Watt (at 50 °C ambient temperature)
Input
7-16 female
Connector position
10
Bottom
Weight
6 kg
Wind load
Frontal: 220 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1294 / 258 / 103 mm
3
dB
Max. power
Horizontal Pattern
0
Vertical Pattern
VPol 900 90° 15.5dBi
Frequency range Polarization Gain Half-power beam width Front-to-back ratio
732 967 870 – 960 MHz Vertical 15.5 dBi H-plane: 90° E-plane: 8.5° > 23 dB
Impedance
50 Ω
VSWR
< 1.3
Intermodulation IM3 (2 x 43 dBm carrier) Max. power
90° 180°
10 3
dB
Type No.
0
Horizontal Pattern
< –150 dBc 500 Watt (at 50 °C ambient temperature) 8.5°
Connector position Weight
7-16 female Rearside
10
9 kg 3
Wind load
dB
Input
Frontal: 340 N (at 150 km/h) 0
Max. wind velocity
200 km/h
Height/width/depth
1934 / 258 / 103 mm
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
Vertical Pattern
91
Eurocell Vertical Polarization Half-power Beam Width
800/900 V 90°
VPol 800/900 90° 15.5dBi Type No.
742 150
Frequency range
806 – 960 MHz
Gain Half-power beam width
180°
Vertical 15.5 dBi (870 – 960 MHz) 15 dBi (806 – 870 MHz) H-plane: 90° E-plane: 8.5°
10 3
dB
Polarization
90°
0
> 23 dB
Impedance
50 Ω
VSWR
< 1.4
Intermodulation IM3 (2 x 43 dBm carrier) Max. power Input Connector position Weight Wind load
Horizontal Pattern
< –150 dBc 8.5°
500 Watt (at 50 °C ambient temperature) 7-16 female
10
Rearside 9 kg Frontal: 340 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1934 / 258 / 103 mm
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
3
dB
Front-to-back ratio
0
Vertical Pattern
92
F- Vertical Polarization Half-power Beam Width
900 V 90°
VPol F- 900 90° 15.5dBi
736 863
Frequency range
872 – 960 MHz
Polarization
Vertical
Gain
15.5 dBi
Half-power beam width
above horizon for first sidelobe better or equal 14 dB below maximum gain
Front-to-back ratio
3 0
Horizontal Pattern
50 Ω
VSWR
< 1.3
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc 400 Watt (at 50 °C ambient temperature)
Input
8.5°
10
7-16 female
Connector position
Bottom or top
Weight Wind load
10
> 20 dB
Impedance
Max. power
180°
6.8 kg Frontal: 380 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1942 / 155 / 49 mm
3
dB
Sidelobe suppression
H-plane: 90° E-plane: 8.5°
90°
dB
Type No.
0
Vertical Pattern first null-fill below horizon better or equal to –25 dB below maximum gain
VPol F- 900 90° 15.5dBi 5°T Type No.
736 864
Frequency range
872 – 960 MHz
Gain Half-power beam width Electrical downtilt Front-to-back ratio Impedance VSWR Intermodulation IM3 (2 x 43 dBm carrier)
Vertical 15.5 dBi H-plane: 90° E-plane: 8.5° 5°, fixed > 20 dB
3
dB
Polarization
90° 180°
0
Horizontal Pattern
50 Ω < 1.3 < –150 dBc 5°
Input
400 Watt (at 50 °C ambient temperature) 7-16 female
Connector position
Bottom
Weight
6.8 kg
10
3
dB
Max. power
0
Wind load
Frontal: 380 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1942 / 155 / 49 mm
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
Vertical Pattern 5° electr. downtilt
93
Eurocell Vertical Polarization Half-power Beam Width Fixed Electrical Downtilt
900 V 90° 6°
VPol 900 90° 15.5dBi 6°T
741 067
Frequency range
870 – 960 MHz
Polarization
Vertical
Gain
15.5 dBi H-plane: 90° E-plane: 9°
Electrical downtilt
6°, fixed
Front-to-back ratio
> 22 dB
Impedance
50 Ω
VSWR
< 1.3
Intermodulation IM3 (2 x 43 dBm carrier) Max. power Input Connector position
3 0
Horizontal Pattern
< –150 dBc 9°
500 Watt (at 50 °C ambient temperature) 7-16 female
10
Rearside 3
Weight Wind load
9 kg Frontal: 340 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1934 / 258 / 103 mm
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
dB
Half-power beam width
90° 180°
dB
Type No.
0
Vertical Pattern 6° electr. downtilt
94
F- Vertical Polarization Half-power Beam Width
900 V 90°
VPol F- 900 90° 16.5dBi
736 866
Frequency range
872 – 960 MHz
Polarization
Vertical
Gain
16.5 dBi
Front-to-back ratio Impedance VSWR Intermodulation IM3 (2 x 43 dBm carrier) Max. power Input Connector position Weight
H-plane: 90° E-plane: 7° > 20 dB 50 Ω
180°
10 3 0
Horizontal Pattern
< 1.4 < –150 dBc 400 Watt (at 50 °C ambient temperature) 7°
7-16 female Bottom or top
10
9 kg 3
Wind load
dB
Half-power beam width
90°
dB
Type No.
Frontal: 490 N (at 150 km/h) 0
Max. wind velocity
180 km/h
Height/width/depth
2422 / 155 / 49 mm
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
Vertical Pattern
95
Eurocell Vertical Polarization Half-power Beam Width
800/900 V 90°
VPol 800/900 90° 17dBi Type No.
730 378
739 418
Frequency range
870 – 960 MHz
806 – 960 MHz Vertical
Gain
17 dBi
Half-power beam width
H-plane: 90° E-plane: 6.5°
Front-to-back ratio
VSWR Intermodulation IM3 (2 x 43 dBm carrier) Max. power
10 3
> 23 dB
0
50 Ω
Impedance < 1.3
180°
dB
Polarization
90°
Horizontal Pattern < 1.5
< –150 dBc 500 Watt (at 50 °C ambient temperature) 6.5°
Connector position Weight
7-16 female Rearside
10
12 kg 3
Wind load
dB
Input
Frontal: 460 N (at 150 km/h) 0
Max. wind velocity
200 km/h
Height/width/depth
2574 / 258 / 103 mm
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
Vertical Pattern
96
Eurocell Vertical Polarization Half-power Beam Width Fixed Electrical Downtilt
900 V 90° 6°
VPol 900 90° 17dBi 6°T
737 549
Frequency range
870 – 960 MHz
Polarization
Vertical
Gain
17 dBi H-plane: 90° E-plane: 6.5°
Electrical downtilt
6°, fixed
Front-to-back ratio
> 23 dB
Impedance
50 Ω
VSWR
< 1.3
Intermodulation IM3 (2 x 43 dBm carrier) Max. power Input Connector position
180°
10 3 0
Horizontal Pattern
< –150 dBc 6.5°
500 Watt (at 50 °C ambient temperature) 7-16 female
10
Rearside 3
Weight
dB
Half-power beam width
90°
dB
Type No.
12 kg 0
Wind load
Frontal: 460 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
2574 / 258 / 103 mm
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
Vertical Pattern 6° electr. downtilt
97
Eurocell Vertical Polarization Half-power Beam Width
900 V 105°
VPol 900 105° 16.5dBi Type No.
730 380
Frequency range
870 – 960 MHz
Polarization
Vertical
Gain
16.5 dBi
Impedance VSWR Intermodulation IM3 (2 x 43 dBm carrier) Max. power Input Connector position Weight Wind load
H-plane: 105° E-plane: 6.5° > 22 dB 50 Ω < 1.3
3
dB
Front-to-back ratio
195°
0
Horizontal Pattern
< –150 dBc 500 Watt (at 50 °C ambient temperature) 7-16 female 6.5°
Rearside 12 kg Frontal: 460 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
2574 / 258 / 103 mm
10
3
dB
Half-power beam width
105°
0
Vertical Pattern
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
98
Eurocell Vertical Polarization Half-power Beam Width
900 V 120°
VPol 900 120° 13dBi Type No.
730 374
Frequency range
870 – 960 MHz
Polarization
Vertical
Gain
13 dBi
120°
215°
H-plane: 120° E-plane: 13°
Front-to-back ratio
> 20 dB 50 Ω
Impedance VSWR
0
Horizontal Pattern
< 1.3
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc 500 Watt (at 50 °C ambient temperature)
Input
13°
7-16 female
Connector position
Bottom
Weight
10
6 kg 3
Wind load
Frontal: 220 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1294 / 258 / 103 mm
dB
Max. power
3
dB
10
Half-power beam width
0
Vertical Pattern
VPol 900 120° 14.5dBi Type No.
737 385
Frequency range
870 – 960 MHz
Polarization Gain
120°
215°
Vertical 14.5 dBi
Front-to-back ratio
H-plane: 120° E-plane: 8.5°
3
> 20 dB
0
Impedance
50 Ω
VSWR
< 1.3
Intermodulation IM3 (2 x 43 dBm carrier) Max. power
dB
10
Half-power beam width
Horizontal Pattern
< –150 dBc 500 Watt (at 50 °C ambient temperature) 8.5°
Connector position Weight
7-16 female Rearside
10
9 kg 3
Wind load
dB
Input
Frontal: 340 N (at 150 km/h) 0
Max. wind velocity
200 km/h
Height/width/depth
1934 / 258 / 103 mm
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
Vertical Pattern
99
Eurocell Vertical Polarization Half-power Beam Width
900 V 120°
VPol 900 120° 15.5dBi Type No.
739 856
Frequency range
870 – 960 MHz
Polarization
Vertical
Gain
15.5 dBi
120°
215°
H-plane: 120° E-plane: 7.5°
Front-to-back ratio
> 20 dB
0
50 Ω
Impedance VSWR
Horizontal Pattern
< 1.3
Intermodulation IM3 (2 x 43 dBm carrier) Max. power
3
dB
10
Half-power beam width
< –150 dBc 400 Watt (at 50 °C ambient temperature) 7.5°
7-16 female
Connector position
Rearside
Weight
10
10.5 kg 3
Wind load
dB
Input
Frontal: 400 N (at 150 km/h) 0
Max. wind velocity
180 km/h
Height/width/depth
2254 / 258 / 103 mm
Vertical Pattern
VPol 800/900 120° 16dBi
730 382
736 618
Frequency range
870 – 960 MHz
806 – 960 MHz
Polarization
Vertical
Vertical
Gain
16 dBi
16 dBi (870 – 960 MHz) 15.5 dBi (806 – 870 MHz)
Front-to-back ratio Impedance VSWR Intermodulation IM3 (2 x 43 dBm carrier) Max. power Input Connector position Weight Wind load
H-plane: 120° E-plane: 6.5° > 20 dB
215°
10
3 0
Horizontal Pattern
50 Ω < 1.3 < –150 dBc 6.5°
500 Watt (at 50 °C ambient temperature) 7-16 female
10
Rearside 12 kg Frontal: 460 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
2574 / 258 / 103 mm
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
3
dB
Half-power beam width
120°
dB
Type No.
0
Vertical Pattern
100
F- Vertical Polarization Half-power Beam Width
900 V 160°
VPol F- 900 160° 11dBi
736 900
Frequency range
872 – 960 MHz
Polarization
Vertical
Gain
11 dBi
Half-power beam width
H-plane: 160° E-plane: 18°
Front-to-back ratio
230°
50 Ω
VSWR
10
3
> 20 dB
Impedance
0
Horizontal Pattern
< 1.4
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc 400 Watt (at 50 °C ambient temperature)
Input
18°
7-16 female
Connector position
Bottom or top
Weight
10
5 kg 3
Wind load
Frontal: 180 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
982 / 155 / 49 mm (224 mm incl. Subreflector)
dB
Max. power
160°
dB
Type No.
0
Vertical Pattern
VPol F- 900 160° 14dBi Type No.
736 902
Frequency range
872 – 960 MHz
Half-power beam width Front-to-back ratio
14 dBi H-plane: 160° E-plane: 18° > 20 dB
Impedance
50 Ω
VSWR
< 1.4
Intermodulation IM3 (2 x 43 dBm carrier) Max. power Input Connector position Weight
230°
10
3 0
Horizontal Pattern
< –150 dBc 400 Watt (at 50 °C ambient temperature)
8.5°
7-16 female Bottom or top
10
7 kg 3
Wind load
dB
Gain
Vertical
dB
Polarization
160°
Frontal: 380 N (at 150 km/h) 0
Max. wind velocity
200 km/h
Height/width/depth
1942 / 155 / 49 mm (224 mm incl. Subreflector)
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
Vertical Pattern
101
F- Vertical Polarization Half-power Beam Width Fixed Electrical Downtilt
900 V 160° 2°
VPol F- 900 160° 15dBi 2°T
737 849
Frequency range
880 – 960 MHz
Polarization
Vertical
Gain
15 dBi H-plane: 160° E-plane: 7°
Electrical downtilt
2°, fixed
Front-to-back ratio
> 20 dB
Impedance
50 Ω
VSWR
< 1.3
Intermodulation IM3 (2 x 43 dBm carrier) Max. power Input Connector position Weight Wind load
230°
10
3 0
Horizontal Pattern
< –150 dBc 400 Watt (at 50 °C ambient temperature) 7-16 female
7°
Bottom 10 kg Frontal: 490 N (at 150 km/h)
Max. wind velocity
180 km/h
Height/width/depth
2422 / 155 / 49 mm (224 mm incl. Subreflector)
10
3
dB
Half-power beam width
160°
dB
Type No.
0
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
Vertical Pattern 2° electr. downtilt
102
Eurocell Vertical Polarization Half-power Beam Width Adjust. Electr. Downtilt
900 V 65° 3°–15°
VPol 900 65° 15dBi 3°–15°T Type No.
737 906
Frequency range
870 – 960 MHz
Polarization
741 493 824 – 960 MHz Vertical
Gain
15 dBi
Half-power beam width
H-plane: 65° E-plane: 14°
Electrical downtilt
3°–15°, adjustable in 1° steps
Side lobe suppression
> 14 dB (0°... 40° above horizon)
Front-to-back ratio
> 25 dB
Impedance
50 Ω
VSWR
< 1.4
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power
500 Watt (at 50 °C ambient temperature)
737 906
120°
741 493
65°
3
0
dB
3
0
Horizontal Pattern
Horizontal Pattern
14°
To set electrical downtilt: – push the lever towards the antenna. – align to the desired setting. – let the lever click into position.
15°
3
0
dB
10
dB
10
3
65°
10
dB
10
120°
0
Vertical Pattern 7° Downtilt
Vertical Pattern 7° Downtilt
Mechanical specifications Input 15° 10
15°
Connector position
10
dB
dB
0
Vertical Pattern 15° Downtilt
3
Bottom
Weight Wind load
3
7-16 female
0
Vertical Pattern 15° Downtilt
Max. wind velocity
7 kg Frontal: Lateral: Rearside:
220 N (at 150 km/h) 140 N (at 150 km/h) 490 N (at 150 km/h) 200 km/h
Packing size
1422 x 302 x 160 mm
Height/width/depth
1294 / 258 / 103 mm
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
103
Eurocell Vertical Polarization Half-power Beam Width Adjust. Electr. Downtilt
900 V 90° 3°–15°
VPol 900 90° 13.5dBi 3°–15°T Type No.
736 077
Frequency range
870 – 960 MHz
Polarization
Vertical
Gain
13.5 dBi
Half-power beam width
H-plane: 90° E-plane: 14°
Electrical downtilt
3°–15°, adjustable in 1° steps
Side lobe suppression
> 14 dB (0°... 40° above horizon)
Front-to-back ratio
> 22 dB
Impedance
50 Ω
VSWR
< 1.4
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power
500 Watt (at 50 °C ambient temperature)
90° 180°
3
dB
10
0
Horizontal Pattern
14°
3
dB
10
0
Vertical Pattern 7° Downtilt
To set electrical downtilt: – push the lever towards the antenna. – align to the desired setting. – let the lever click into position.
Mechanical specifications Input 15°
Connector position
Bottom
Weight
10
dB
Wind load 3
7-16 female
0
Vertical Pattern 15° Downtilt
Max. wind velocity
6 kg Frontal: Lateral: Rearside:
220 N (at 150 km/h) 140 N (at 150 km/h) 490 N (at 150 km/h) 200 km/h
Packing size
1422 x 302 x 160 mm
Height/width/depth
1294 / 258 / 103 mm
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
104
F- Vertical Polarization Half-power Beam Width Adjust. Electr. Downtilt
900 V 90° 4°–14°
VPol F- 900 90° 13dBi 4°–14°T Type No.
738 580
Frequency range
880 – 960 MHz
Polarization
Vertical
Gain
13 dBi
Half-power beam width
H-plane: 90° E-plane: 14°
Electrical tilt
4°–14°, continously adjustable
Front-to-back ratio
> 20 dB 50 Ω
Impedance VSWR
< 1.5
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power
400 Watt (at 50 °C ambient temperature)
90°
3
dB
180°
0
Horizontal Pattern Mechanical specifications Input
7-16 female
Connector position Adjustment mechanism
14°
Bottom 1x, Position bottom continously adjustable
15°
Weight
0
Vertical Pattern 7° electrical downtilt
3
dB
3
Wind load
10
dB
10
0
Vertical Pattern 14° electrical downtilt
Max. wind velocity
4.6 kg Frontal: Lateral: Rearside:
230 N (at 150 km/h) 100 N (at 150 km/h) 290 N (at 150 km/h) 200 km/h
Packing size
1550 x 172 x 72 mm
Height/width/depth
1436 / 155 / 49 mm
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
105
Eurocell Vertical Polarization Half-power Beam Width Adjust. Electr. Downtilt
900 V 105° 3°–15°
VPol 900 105° 13dBi 3°–15°T Type No.
736 078
Frequency range
870 – 960 MHz
Polarization
Vertical
Gain
13 dBi
Half-power beam width
H-plane: 105° E-plane: 14°
Electrical downtilt
3°–15°, adjustable in 1° steps
Side lobe suppression
> 14 dB (0°... 40° above horizon)
Front-to-back ratio
> 22 dB
Impedance
50 Ω
VSWR
< 1.4
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power
500 Watt (at 50 °C ambient temperature)
105°
3
dB
195°
0
Horizontal Pattern
14°
3
dB
10
0
Vertical Pattern 7° Downtilt
To set electrical downtilt: – push the lever towards the antenna. – align to the desired setting. – let the lever click into position.
Mechanical specifications Input 15°
Connector position
Bottom
Weight
10
dB
Wind load 3
7-16 female
0
Vertical Pattern 15° Downtilt
Max. wind velocity
6 kg Frontal: Lateral: Rearside:
220 N (at 150 km/h) 140 N (at 150 km/h) 490 N (at 150 km/h) 200 km/h
Packing size
1422 x 302 x 160 mm
Height/width/depth
1294 / 258 / 103 mm
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
106
Eurocell Vertical Polarization Half-power Beam Width Adjust. Electr. Downtilt
900 V 160° 3°–15°
VPol 900 160° 11.5dBi 3°–15°T Type No.
738 018
Frequency range
870 – 960 MHz
Polarization
Vertical
Gain
11.5 dBi
Half-power beam width
H-plane: 160° E-plane: 14°
Electrical downtilt
3°–15°, adjustable in 1° steps
Side lobe suppression
> 14 dB (0°... 40° above horizon)
Front-to-back ratio
> 25 dB
Impedance
50 Ω
VSWR
< 1.5
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power
500 Watt (at 50 °C ambient temperature)
160°
10
3
dB
230°
0
Horizontal Pattern
14°
3
dB
10
0
Vertical Pattern 7° Downtilt
To set electrical downtilt: – push the lever towards the antenna. – align to the desired setting. – let the lever click into position.
Mechanical specifications Input
7-16 female
Connector position 15°
dB
3
Weight Wind load
10
0
Vertical Pattern 15° Downtilt
Bottom
Max. wind velocity Packing size Height/width/depth
Mounting accessories are not included in the scope of delivery (see page 166 – 171)
6.5 kg Frontal: Lateral: Rearside:
220 N (at 150 km/h) 140 N (at 150 km/h) 490 N (at 150 km/h) 200 km/h
1422 x 302 x 160 mm 1294 / 258 / 103 mm (284 mm incl. subreflector)
107
Multi-unit F- Half-power Beam Width 2 Unit Antennas Antenna
Frequency range VSWR Gain Impedance Polarization Front-to-back ratio Half-power beam width Isolation Max. power per input Weight Wind load
Max. wind velocity Height/width/depth
90°
VPol 2-F- 900 90° 14dBi
VPol 2-F- 900 90° 14dBi 6°T
738 020
738 021
2 x 7-16 female Bottom or top Bottom: Connector T = Top system Connector B = Bottom system Top: Connector T = Bottom system Connector B = Top system 872 – 960 MHz < 1.4 14 dBi bottom system 13.5 dBi top system 50 Ω Vertical > 20 dB H-plane: 90°/ E-plane: 14° > 36 dB 400 Watt (at 50 °C ambient temperature) 9 kg Frontal: 490 N (at 150 km/h) Lateral: 230 N (at 150 km/h) Rearside: 620 N (at 150 km/h) 180 km/h 2422 / 155 / 49 mm
2 x 7-16 female Bottom
Type No. Input Connector position
900
872 – 960 MHz < 1.4 14 dBi bottom system 13.5 dBi top system 50 Ω Vertical > 20 dB H-plane: 90°/ E-plane: 14°, 6°T > 36 dB 400 Watt (at 50 °C ambient temperature) 9 kg Frontal: 490 N (at 150 km/h) Lateral: 230 N (at 150 km/h) Rearside: 620 N (at 150 km/h) 180 km/h 2422 / 155 / 49 mm
90° 180° 14°
14°
10
3
0
0
dB
3
dB
dB
10
3
0
Components for a 6-unit GSM antenna for 3 sectors Using the mast type no. 738 019 and the azimuth adjustment flange type no. 737 649, the 2-unit antennas type no. 738 020 or 738 021 can be combined to form a 6-unit antenna. Data of the 6-unit antenna: Length Diameter Weight Wind load Max. wind velocity Connector position Mounting Material
Isolation Grounding
2800 mm (incl. mast) 220 mm 70 kg 600 N (at 150 km/h) 180 km/h Bottom (6 x 7-16 female) By means of 190 mm diameter standard flange. Mast and flange: Hot dip galvanized steel. Antennas: Completely closed fiberglass radome. Colour: Grey. All screws and nuts: Stainless steel. vertical > 36 dB horizontal > 45 dB All metal parts of the antenna as well as the inner conductors are DC grounded.
88.9 mm
220 mm
Top view ø190
Description
Type no.
Quantity
Example 1:
2-F- 900 90° 14 dBi Mast Azimuth adjustment flange
738 020 738 019 737 649
3 pieces 1 piece 1 piece
Example 2:
2-F- 900 90° 14 dBi 2-F- 900 90° 14dBi 6°T Mast Azimuth adjustment flange
738 738 738 737
1 2 1 1
020 021 019 649
piece pieces piece piece
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
100
The components must be ordered separately:
ø18 ø150
Flange base of the mast 738 019 108
Multi-unit F- Half-power Beam Width 3 Unit Antennas Antenna
900 90°
VPol 3-F- 900 90° 12.5dBi
738 144
Type No. Input Connector position Frequency range VSWR Gain Impedance Polarization Front-to-back ratio Half-power beam width Isolation Max. power per input Weight Wind load
Max. wind velocity Height/width/depth
3 x 7-16 female Bottom 872 – 960 MHz < 1.4 12.5 dBi bottom system 12 dBi middle, top system 50 Ω Vertical > 20 dB H-plane: 90°/ E-plane: 18° > 36 dB 400 Watt (at 50 °C ambient temperature) 11 kg Frontal: 620 N (at 150 km/h) Lateral: 290 N (at 150 km/h) Rearside: 780 N (at 150 km/h) 180 km/h (on mast type no. 738139) 3041 / 155 / 49 mm
90° 180° 18°
3
dB
3
dB
10
0
0
Components for a 9-unit GSM antenna for 3 sectors Using the mast type no. 738 139 and the azimuth adjustment flange type no. 737 649, the 3-unit antennas type no. 738 144 or 738 145 can be combined to form a 9-unit antenna. Data of the 9-unit antenna:
Isolation Grounding
3400 mm (incl. mast) 220 mm 84 kg 750 N (at 150 km/h) 180 km/h Bottom (9 x 7-16 female) By means of 190 mm diameter standard flange. Mast and flange: Hot dip galvanized steel. Antennas: Completely closed fiberglass radome. Colour: Grey. All screws and nuts: Stainless steel. Vertical > 36 dB Horizontal > 45 dB All metal parts of the antenna as well as the inner conductors are DC grounded.
88.9 mm
220 mm
Top view ø190
100
Length Diameter Weight Wind load Max. wind velocity Connector position Mounting Material
The components must be ordered separately: Description
Type No.
Quantity
Example 1:
3-F- 900 90° 12.5 dBi Mast Azimuth adjustment flange
738 144 738 139 737 649
3 pieces 1 piece 1 piece
Example 2:
3-F- 900 90° 12.5 dBi 3-F- 900 90° 12.5 dBi 10°T Mast Azimuth adjustment flange
738 738 738 737
1 2 1 1
144 145 139 649
piece pieces piece piece
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
ø18 ø150 Flange base of the mast 738 139 109
110
Summary – Directional Antennas Vertical Polarization 1800/1900 Vertical Polarization Type
Type No.
Frequency range [MHz]
Height [mm]
Connector position
Page
VPol F-1800/1900
33°
15 dBi
739 129
1710 – 1990
342
bottom or top
112
VPol F-1800/1900
33°
18 dBi
739 131
1710 – 1990
662
bottom or top
112
VPol F-1800/1900
33°
21 dBi
739 134
1710 – 1990
1302
bottom or top
113
VPol F-1800/1900
33°
22.5 dBi
739 136
1710 – 1990
1942
bottom or top
113
VPol F-
1800
65°
10 dBi
734 304
1710 –1900
182
bottom or top
114
VPol F- VPol F- VPol F-
1800 1800 1800
65° 65° 65°
15.5 dBi 17 dBi 16.5 dBi
2°T 8°T
734 310 735 141 736 016
1710 – 1900 1710 – 1900 1710 – 1900
662 982 982
bottom or top bottom bottom
114 115 115
VPol F- VPol F-
1800 1800
65° 65°
18 dBi 18 dBi
2°T
734 314 735 147
1710 – 1900 1710 – 1900
1302 1302
bottom or top bottom
116 116
VPol F- VPol F-
1800 1800
90° 90°
8 dBi 8 dBi
734 318 734 319
1710 – 1900 1710 – 1900
182 182
bottom or top bottom or top
117 117
VPol F-
1800
90°
11 dBi
734 320
1710 – 1900
342
bottom or top
117
VPol F-
1800
90°
16.5 dBi
2°T
734 328
1710 – 1900
1302
bottom
118
VPol F-
1800
90°
17.5 dBi
2°T
734 330
1710 – 1900
1942
bottom
118
VPol F-
1800
105°
16 dBi
2°T
734 342
1710 – 1900
1302
bottom
119
Additional versions on request
111
F- Vertical Polarization Half-power Beam Width
1800 / 1900 V 33°
VPol F- 1800/1900 33° 15dBi
739 129
Type No. Frequency range
1710 – 1990 MHz
Gain
33°
Vertical 15 dBi (1880 – 1990 MHz) 14.5 dBi (1710 – 1880 MHz)
Half-power beam width
H-plane: 33° E-plane: 27°
10
3
dB
Polarization
0
Front-to-back ratio
> 25 dB
Impedance
50 Ω
VSWR
< 1.5
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Input
7-16 female
Connector position
10
Bottom or top
Weight Wind load
27°
200 Watt (at 50 °C ambient temperature)
2.5 kg Frontal: 85 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
342 / 262 / 59 mm
3
dB
Max. power
Horizontal Pattern
0
Vertical Pattern
VPol F- 1800/1900 33° 18dBi
Frequency range Polarization Gain Half-power beam width
739 131 1710 – 1990 MHz 33°
Vertical 18 dBi (1880 – 1990 MHz) 17.5 dBi (1710 – 1880 MHz) H-plane: 33° E-plane: 13°
10
3
dB
Type No.
0
Impedance VSWR Intermodulation IM3 (2 x 43 dBm carrier) Max. power Input Connector position Weight Wind load
> 25 dB
Horizontal Pattern
50 Ω < 1.5 < –150 dBc 13°
200 Watt (at 50 °C ambient temperature) 7-16 female
10
Bottom or top 4 kg Frontal: 170 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
662 / 262 / 59 mm
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
3
dB
Front-to-back ratio
0
Vertical Pattern
112
F- Vertical Polarization Half-power Beam Width
1800 / 1900 V 33°
VPol F- 1800/1900 33° 21dBi
Frequency range
739 134 1710 – 1990 MHz
Polarization Gain
33°
Vertical 21 dBi (1880 – 1990 MHz) 20.5 dBi (1710 – 1880 MHz)
Half-power beam width
H-plane: 33° E-plane: 6.5°
10
3
dB
Type No.
0
Front-to-back ratio
> 25 dB
Impedance
50 Ω
VSWR
< 1.5
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Input
7-16 female
Connector position
10
Bottom or top
Weight Wind load
6.5°
200 Watt (at 50 °C ambient temperature)
7.5 kg Frontal: 350 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1302 / 262 / 59 mm
3
dB
Max. power
Horizontal Pattern
0
Vertical Pattern
VPol F- 1800/1900 33° 22.5dBi
Frequency range Polarization Gain Half-power beam width
739 136 1710 – 1990 MHz 33°
Vertical 22.5 dBi (1880 – 1990 MHz) 22 dBi (1710 – 1880 MHz) H-plane: 33° E-plane: 4.5°
10
3
dB
Type No.
0
Impedance VSWR Intermodulation IM3 (2 x 43 dBm carrier) Max. power Input Connector position Weight Wind load
> 25 dB
Horizontal Pattern
50 Ω < 1.5 < –150 dBc 4.5°
200 Watt (at 50 °C ambient temperature) 7-16 female
10
Bottom or top 11 kg Frontal: 540 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1942 / 262 / 59 mm
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
3
dB
Front-to-back ratio
0
Vertical Pattern
113
F- Vertical Polarization Half-power Beam Width
1800 V 65°
VPol F- 1800 65° 10dBi
734 304
Type No. Frequency range
120°
1710 – 1900 MHz
Polarization
Vertical
Gain
10 dBi
65°
H-plane: 65° E-plane: 55°
Front-to-back ratio
> 25 dB 50 Ω
Impedance VSWR
0
Horizontal Pattern
< 1.3 (1710 – 1880 MHz) < 1.5 (1880 – 1900 MHz)
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
55°
200 Watt (at 50 °C ambient temperature)
Input
7-16 female
Connector position
10
Bottom or top
Weight
1.3 kg
Wind load
Frontal: 30 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
182 / 155 / 36 mm
3
dB
Max. power
3
dB
10
Half-power beam width
0
Vertical Pattern
VPol F- 1800 65° 15.5dBi Type No. Frequency range Polarization Gain
734 310 120°
1710 – 1900 MHz
65°
Vertical 15.5 dBi
Impedance VSWR Intermodulation IM3 (2 x 43 dBm carrier) Max. power Input Connector position Weight Wind load
> 25 dB 50 Ω
3 0
Horizontal Pattern
< 1.3 (1710 – 1880 MHz) < 1.5 (1880 – 1900 MHz) < –150 dBc 14°
200 Watt (at 50 °C ambient temperature) 7-16 female
10
Bottom or top 2.7 kg Frontal: 130 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
662 / 155 / 36 mm
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
3
dB
Front-to-back ratio
H-plane: 65° E-plane: 14°
dB
10
Half-power beam width
0
Vertical Pattern
114
F- Vertical Polarization Half-power Beam Width
1800 V 65°
VPol F- 1800 65° 17dBi 2°T
735 141
Type No. Frequency range
120°
1710 – 1900 MHz
Polarization
Vertical
Gain
17 dBi
65°
H-plane: 65° E-plane: 9°
Electrical downtilt
2°, fixed
Front-to-back ratio
> 25 dB 50 Ω
Impedance VSWR
< 1.3 (1710 – 1880 MHz) < 1.5 (1880 – 1900 MHz)
Intermodulation IM3 (2 x 43 dBm carrier) Max. power
0
Horizontal Pattern
above horizon for first sidelobe better or equal 14 dB below maximum gain
9°
< –150 dBc 10
200 Watt (at 50 °C ambient temperature)
Input
3
7-16 female
dB
Sidelobe suppression
3
dB
10
Half-power beam width
0
Connector position
Bottom
Vertical Pattern
Weight
3.7 kg
– 2° electr. downtilt – first null-fill below horizon better or equal –25 dB below maximum gain
Wind load
Frontal: 190 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
982 / 155 / 36 mm
VPol F- 1800 65° 16.5dBi 8°T Type No. Frequency range Polarization Gain
736 016 120°
1710 – 1900 MHz
65°
Vertical 16.5 dBi
Side lobe suppression Front-to-back ratio Impedance VSWR Intermodulation IM3 (2 x 43 dBm carrier) Max. power Input
3
8°, fixed
0
Horizontal Pattern
above horizon for first sidelobe better or equal 14 dB below maximum gain > 25 dB 50 Ω < 1.3 (1710 – 1880 MHz) < 1.5 (1880 – 1900 MHz)
9°
< –150 dBc
10
200 Watt (at 50 °C ambient temperature)
3
7-16 female
dB
Electrical downtilt
H-plane: 65° E-plane: 9°
dB
10
Half-power beam width
0
Connector position
Bottom
Vertical Pattern
Weight
3.7 kg
– 8° electr. downtilt – first null-fill below horizon better or equal –25 dB below maximum gain
Wind load
Frontal: 190 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
982 / 155 / 36 mm
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
115
F- Vertical Polarization Half-power Beam Width
1800 V 65°
VPol F- 1800 65° 18dBi
734 314
Type No. Frequency range
120°
1710 – 1900 MHz
Polarization
Vertical
Gain
18 dBi
65°
H-plane: 65° E-plane: 6.5°
Front-to-back ratio
> 25 dB
< –150 dBc 6.5°
200 Watt (at 50 °C ambient temperature)
Input
7-16 female
10
Bottom or top
Weight
3
4.6 kg
0
Frontal: 260 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1302 / 155 / 36 mm
dB
Connector position
Wind load
Horizontal Pattern
< 1.3 (1710 – 1880 MHz) < 1.5 (1880 – 1900 MHz)
Intermodulation IM3 (2 x 43 dBm carrier) Max. power
0
50 Ω
Impedance VSWR
3
dB
10
Half-power beam width
Vertical Pattern
VPol F- 1800 65° 18dBi 2°T Type No. Frequency range Polarization Gain
735 147 120°
1710 – 1900 MHz
65°
Vertical 18 dBi
Side lobe suppression Front-to-back ratio Impedance VSWR Intermodulation IM3 (2 x 43 dBm carrier) Max. power Input
3
2°, fixed
0
Horizontal Pattern
above horizon for first sidelobe better or equal 14 dB below maximum gain > 25 dB 50 Ω < 1.3 (1710 – 1880 MHz) < 1.5 (1880 – 1900 MHz)
7°
< –150 dBc
10
200 Watt (at 50 °C ambient temperature)
3
7-16 female
dB
Electrical downtilt
H-plane: 65° E-plane: 7°
dB
10
Half-power beam width
0
Connector position
Bottom
Vertical Pattern
Weight
4.6 kg
– 2° electr. downtilt – first null-fill below horizon better or equal to –25 dB below maximum gain
Wind load
Frontal: 260 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1302 / 155 / 36 mm
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
116
F- Vertical Polarization Half-power Beam Width
1800 V 90°
VPol F- 1800 90° 8dBi
734 318
Frequency range
1710 – 1900 MHz
Polarization
H-plane: 90° E-plane: 55°
Front-to-back ratio
3
> 19 dB
0
50 Ω
Impedance VSWR
dB
8 dBi
Half-power beam width
Horizontal Pattern
< 1.3 (1710 – 1880 MHz) < 1.5 (1880 – 1900 MHz)
Intermodulation IM3 (2 x 43 dBm carrier)
Input
90° 180°
Vertical
Gain
Max. power
734 319
< –150 dBc
55°
200 Watt (at 50 °C ambient temperature) 7-16 female
Connector position
N female
10
Bottom or top
Weight
1.4 kg
Wind load
Frontal: 30 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
182 / 155 / 49 mm
3
dB
Type No.
0
Vertical Pattern
VPol F- 1800 90° 11dBi
Polarization Gain Half-power beam width Front-to-back ratio Impedance VSWR Intermodulation IM3 (2 x 43 dBm carrier) Max. power Input Connector position Weight Wind load
734 320 1710 – 1900 MHz
90° 180°
Vertical 11 dBi H-plane: 90° E-plane: 30° > 22 dB 50 Ω
3
dB
Frequency range
0
Horizontal Pattern
< 1.3 (1710 – 1880 MHz) < 1.5 (1880 – 1900 MHz) < –150 dBc 30°
200 Watt (at 50 °C ambient temperature) 7-16 female
10
Bottom or top 1.9 kg Frontal: 60 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
342 / 155 / 49 mm
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
3
dB
Type No.
0
Vertical Pattern
117
F- Vertical Polarization Half-power Beam Width
1800 V 90°
VPol F- 1800 90° 16.5dBi 2°T
734 328
Frequency range Polarization
Vertical
Gain
16.5 dBi
Half-power beam width
H-plane: 90° E-plane: 7°
Electrical downtilt
2°, fixed
> 23 dB 50 Ω
Impedance
< 1.3 (1710 – 1880 MHz) < 1.5 (1880 – 1900 MHz)
Intermodulation IM3 (2 x 43 dBm carrier) Max. power
0
Horizontal Pattern
above horizon for first sidelobe better or equal 14 dB below maximum gain
Front-to-back ratio
VSWR
3
7°
< –150 dBc
10
200 Watt (at 50 °C ambient temperature)
Input
3
7-16 female
dB
Sidelobe suppression
90° 180°
1710 – 1900 MHz
dB
Type No.
0
Connector position
Bottom
Vertical Pattern
Weight
4.6 kg
– 2° electr. downtilt – first null-fill below horizon better or equal to –25 dB below maximum gain
Wind load
Frontal: 250 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1302 / 155 / 49 mm
VPol F- 1800 90° 17.5dBi 2°T
Polarization Gain Half-power beam width Electrical downtilt Sidelobe suppression Front-to-back ratio Impedance VSWR Intermodulation IM3 (2 x 43 dBm carrier) Max. power Input
734 330
90° 180°
1710 – 1900 MHz Vertical 17.5 dBi H-plane: 90° E-plane: 5°
3
2°, fixed
dB
Frequency range
0
Horizontal Pattern
above horizon for first sidelobe better or equal 14 dB below maximum gain > 23 dB 50 Ω < 1.3 (1710 – 1880 MHz) < 1.5 (1880 – 1900 MHz)
5°
< –150 dBc
10
200 Watt (at 50 °C ambient temperature)
3
7-16 female
dB
Type No.
0
Connector position
Bottom
Vertical Pattern
Weight
6.9 kg
– 2° electr. downtilt – first null-fill below horizon better or equal to –25 dB below maximum gain
Wind load
Frontal: 380 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1942 / 155 / 49 mm
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
118
F- Vertical Polarization Half-power Beam Width Fixed Electrical Downtilt
1800 V 105° 2°
VPol F- 1800 105° 16dBi 2°T
Vertical
Gain
16 dBi
Electrical downtilt Sidelobe suppression Front-to-back ratio Impedance VSWR Intermodulation IM3 (2 x 43 dBm carrier) Max. power Input
195°
1710 – 1900 MHz
Polarization
Half-power beam width
105°
H-plane: 105° E-plane: 7°
3
2°, fixed
dB
Frequency range
734 342
0
Horizontal Pattern
above horizon for first sidelobe better or equal 14 dB below maximum gain > 20 dB 50 Ω < 1.3 (1710 – 1880 MHz) < 1.5 (1880 – 1900 MHz)
7°
< –150 dBc
10
200 Watt (at 50 °C ambient temperature)
3
7-16 female
dB
Type No.
0
Connector position
Bottom
Vertical Pattern
Weight
4.9 kg
– 2° electr. downtilt – first null-fill below horizon better or equal to –25 dB below maximum gain
Wind load
Frontal: 250 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
1302 / 155 / 49 mm
Mounting accessories are not included in the scope of delivery (see page 172 – 181)
119
120
Omnidirectional Antennas
Solid, reliable construction
Omnidirectional antennas are often installed at exposed sites on the top of masts, so special attention has been paid to their mechnical construction. The exceptionally stiff fiberglass tube with low tip deflection will withstand wind velocities of up to 200 km/h.
Excellent grounding
From the solid metal tip right down to the base of the high gain antennas the grounding crosssection is 22 mm2 copper or more, exceeding EN 50083-1.
Environmental influences
The design of Kathrein antennas is based on fundamental engineering knowledge and also on decades of practical experience, during which the various constructions and materials used have proved their outstanding reliability.
Environmental conditions
Kathrein cellular antennas are designed to operate under the environmental conditions as described in ETS 300 019-1-4 class 4.1 E. The antennas exceed this standard with regard to the following items: – Low temperature: – 55 °C – High temperature (dry): + 60 °C
Environmental tests
Kathrein antennas have ed environmental tests as recommended in ETS 300 019-2-4. The homogenous design of Kathrein’s antenna families use identical modules and materials. Extensive tests have been performed on typical samples and modules.
Long service life
According to our own experience, the outstanding mechanical characteristics of Kathrein antennas result in an antenna service life of over 15 years.
Low intermodulation From on our many years of experience products (typically –150 dBc) in the construction of antennas and from our extensive research into the effects of intermodulation, we have been able to optimize the material used for these antennas. (The indicated values refer to 3rd order products measured with 2 carriers of 20 W each). Integrated mast attachment
Integrated into the antenna base are two easily mountable U-bolt brackets, suitable for masts of diameters from 50 to 94 mm or 30 to 105 mm.
121
Summary – Omnidirectional Antennas 800/900/1800/2000
Vertical Polarization – 800/900 Type
Type No.
Frequency Connector Height range [MHz] female [mm]
Remarks
Page
VPol Omni 900 VPol Omni 800/900 VPol Omni 800/900
360° 360° 360°
2 dBi 2 dBi 2 dBi
738 450 K 75 11 61 K 75 11 67
870 – 960 806 – 960 806 – 960
N N 7-16
180 273 273
indoor/outdoor 123 124 124
VPol Omni VPol Omni
900 900
360° 360°
5 dBi 5 dBi
K 75 15 64 1 K 75 15 64 7
890 – 960 890 – 960
N 7-16
635 635
125 125
VPol Omni VPol Omni VPol Omni
900 900 900
360° 360° 360°
8 dBi 8 dBi 8 dBi
736 350 736 351 741 558
870 – 960 870 – 960 870 – 960
7-16 7-16 7-16
1543 1536 1764
VPol Omni
800
360°
11 dBi
738 192
824 – 894
7-16
3237
VPol Omni VPol Omni VPol Omni
900 900 900
360° 360° 360°
11 dBi 11 dBi 11 dBi
736 347 736 348 738 779
870 – 960 870 – 960 870 – 960
7-16 7-16 7-16
3033 3022 3254
inverted special base
129 129 130
VPol Omni
900
360°
11 dBi
736 352
870 – 960
7-16
3233
lightning rod
131
VPol Omni VPol Omni
900 900
360° 10.5 dBi 5°T 360° 10.5 dBi 5°T
736 349 738 664
870 – 960 870 – 960
7-16 7-16
2954 2856
inverted
132 132
738 449
870 – 960 1710 – 1880
N
216
indoor/outdoor 133
739 785
1710 – 1880
7-16
800
134
738 187 739 404 737 190
1710 – 1880 1700 – 1880 1710 – 1880
7-16 7-16 7-16
1570 1558 1560
738 454
1710 – 2170
N
115
indoor/outdoor 137
1920 – 2170
7-16
1390
138
inverted special base
126 126 127 128
Vertical Polarization – Dual-band 900/1800 VPol Omni 900/1800
360°
2 dBi
Vertical Polarization – 1800 VPol Omni
1800
360°
VPol Omni VPol Omni VPol Omni
1800 1800 1800
360° 360° 360°
8 dBi 11 dBi 11 dBi 11 dBi 6°T
inverted
135 135 136
Vertical Polarization – 1800/2000 VPol Omni 1710–2170
360°
2 dBi
New Product
Vertical Polarization – 2000 VPol Omni
2000
360°
11 dBi
741 790
122
Omnidirectional Antenna Vertical Polarization Indoor and outdoor use
900 V
VPol Omni 900 360° 2dBi
738 450
Type No. Input
N female
Connector position
Bottom or top 870 – 960 MHz
VSWR
< 1.5
Gain
2 dBi
Impedance
50 Ω
Polarization
Vertical
Max. power
100 Watt (at 50 °C ambient temperature)
Weight
200 g
Radome diameter
20 mm
Height
180 mm
Material:
Radiator: Brass. Radome: Fiberglass, colour: White.
Mounting:
One hole mounting (16 mm diameter) to surfaces of max. 10 mm thickness.
Grounding:
All metal parts of the antenna as well as the inner conductor and the mounting kit are DC grounded.
180 mm
Frequency range
78°
3
dB
10
0
Vertical Pattern
123
Omnidirectional Antennas Vertical Polarization
806 – 960 V
VPol Omni 806–960 360° 2dBi
K 75 11 61 K 75 11 67
Type No. Frequency range
806 – 960 MHz Vertical
Gain
2 dBi
Impedance
50 Ω
VSWR
348 mm
Polarization
< 1.5
Max. power
100 Watt (at 50 °C ambient temperature)
Mounting:
The antenna can be attached in two ways with the supplied mounting kit: 1. On the tip of a tubular mast of 40 – 54 mm diameter (connecting cable runs inside the mast). 2. Laterally at the tip of a tubular mast of 20 – 54 mm diameter (connecting cable runs outside the mast).
Material:
Radiator: Brass. Radome: Fiberglass, colour: Grey. Base: Weather-proof aluminum. Mounting kit, screws and nuts: Stainless steel.
Grounding:
All metal parts of the antenna as well as the inner conductor and the mounting kit are DC grounded.
78°
3
dB
10
0
Vertical Pattern
Mechanical specifications Input
7-16 female Bottom 0.74 kg
Max. wind velocity Packing size
Brackets for side mounting (see page 182 – 184)
N female
Weight
Wind load
Laterally at the tip
K 75 11 67
Connector position
Radome diameter
On the tip
K 75 11 61
Height
21 mm 17 N (at 150 km/h) 200 km/h 455 x 112 x 97 mm 348 mm
124
Omnidirectional Antennas Vertical Polarization
900 V
VPol Omni 900 360° 5dBi
K 75 15 64 1 K 75 15 64 7
Type No. Frequency range
890 – 960 MHz
Polarization
Vertical
Gain
5 dBi
Impedance
50 Ω
VSWR
< 1.5 250 Watt (at 50 °C ambient temperature)
Mounting:
The antenna can be attached in two ways with the supplied mounting kit: 1. On the tip of a tubular mast of 40 – 54 mm diameter (connecting cable runs inside the mast). 2. Laterally at the tip of a tubular mast of 20 – 54 mm diameter (connecting cable runs outside the mast).
Material:
Radiator: Brass. Radome: Fiberglass, colour: Grey. Base: Weather-proof aluminum. Mounting kit, screws and nuts: Stainless steel.
Grounding:
All metal parts of the antenna as well as the inner conductor and the mounting kit are DC grounded.
715 mm
Max. power
30°
3
dB
10
0
Vertical Pattern
Mechanical specifications Input
7-16 female Bottom 0.90 kg
Max. wind velocity Packing size
Brackets for side mounting (see page 182 – 184)
N female
Weight
Wind load
Laterally at the tip
K 75 15 64 7
Connector position
Radome diameter
On the tip
K 75 15 64 1
Height
21 mm 20 N (at 150 km/h) 200 km/h 825 x 112 x 97 mm 715 mm
125
Omnidirectional Antennas Vertical Polarization
900 V
VPol Omni 900 360° 8dBi
736 350
Type No. Frequency range
736 351
870 – 960 MHz
Polarization
Vertical
Gain
8 dBi
Impedance
50 Ω < 1.5
Intermodulation IM3 (2 x 43 dBm carrier)
1543 mm
VSWR
< –150 dBc
Max. power
500 Watt (at 50 °C ambient temperature)
Mounting:
The antenna can be attached laterally at the tip of a tubular mast of 50 – 94 mm diameter with two U-bolt brackets supplied with the antenna (connecting cable runs outside the mast).
Material:
Radiator: Copper and brass. Radome: Fiberglass, colour: Grey. Base: Weather-proof aluminum. Mounting kit, screws and nuts: Stainless steel.
Excellent grounding:
From the solid metal tip right down to the base of the high gain antennas the grounding crosssection is 22 mm2 copper or more, exceeding EN 50083-1.
736 350
13°
3
dB
10
0
Vertical Pattern
Mechanical specifications Input
um maximtop mast
230
Connector position
736 350
736 351
7-16 female
7-16 female
Bottom
Top
Weight
5.5 kg
150
Radome diameter Wind load Max. wind velocity Packing size
51 mm 130 N (at 150 km/h) 200 km/h 1846 x 148 x 112 mm
104
Height
Brackets for side mounting (see page 182 – 184)
1543 mm
1536 mm
126
Omnidirectional Antenna Vertical Polarization
900 V
• Special base
VPol Omni 900 360° 8dBi Type No.
741 558
Frequency range
870 – 960 MHz
Polarization
Vertical
Gain
8 dBi
Impedance
50 Ω
VSWR
< 1.5 < –150 dBc
Max. power
1764 mm
Intermodulation IM3 (2 x 43 dBm carrier)
500 Watt (at 50 °C ambient temperature)
Mounting:
The antenna can be attached in two ways with the supplied mounting kit: 1. On the tip of a tubular mast of 65 – 105 mm diameter (connecting cable runs inside the mast). 2. Laterally at the tip of a tubular mast of 30 – 90 mm diameter (connecting cable runs outside the mast).
Material:
Radiator: Copper and brass. Radome: Fiberglass, colour: Grey. Base: Weather-proof aluminum. Mounting kit, screws and nuts: Stainless steel.
Grounding:
The antenna is DC grounded via a copper tube having a cross-sectional area of 22 mm2. The inner conductor is coupled capacitively.
13°
3
dB
10
0
Vertical Pattern
Mechanical specifications Input Connector position Weight Radome diameter Wind load Max. wind velocity Packing size On the tip
Laterally at the tip
Brackets for side mounting (see page 182 – 184)
Height
7-16 female Bottom 6 kg 51 mm 135 N (at 150 km/h) 200 km/h 1950 x 198 x 152 mm 1764 mm
127
Omnidirectional Antenna Vertical Polarization
800 V
VPol Omni 800 360° 11dBi Type No.
738 192
Frequency range
824 – 894 MHz
Polarization
Vertical
Gain
11 dBi 50 Ω
Impedance VSWR
< 1.5
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc 500 Watt (at 50 °C ambient temperature)
Mounting:
The antenna can be attached laterally at the tip of a tubular mast of 50 – 94 mm diameter with two U-bolt brackets supplied with the antenna (connecting cable runs outside the mast).
Material:
Radiator: Copper and brass. Radome: Fiberglass, colour: Grey. Base: Weather-proof aluminum. Mounting kit, screws and nuts: Stainless steel.
Excellent grounding:
From the solid metal tip right down to the base of the high gain antennas the grounding crosssection is 22 mm2 copper or more, exceeding EN 50083-1.
3237 mm
Max. power
7°
738 192
3
dB
10
0
Vertical Pattern
Mechanical specifications Input
230
um maximtop mast
Connector position
Bottom
Weight
8.5 kg
Radome diameter
150
7-16 female
Wind load Max. wind velocity Packing size
51 mm 230 N (at 150 km/h) 180 km/h 3516 x 148 x 112 mm
104
Height
Brackets for side mounting (see page 182 – 184)
3237 mm
128
Omnidirectional Antennas Vertical Polarization
900 V
VPol Omni 900 360° 11dBi
736 347
Type No. Frequency range
736 348
870 – 960 MHz
Polarization
Vertical
Gain
11 dBi 50 Ω
Impedance VSWR
< 1.5
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc 500 Watt (at 50 °C ambient temperature)
Mounting:
The antenna can be attached laterally at the tip of a tubular mast of 50 – 94 mm diameter with two U-bolt brackets supplied with the antenna (connecting cable runs outside the mast).
Material:
Radiator: Copper and brass. Radome: Fiberglass, colour: Grey. Base: Weather-proof aluminum. Mounting kit, screws and nuts: Stainless steel.
Excellent grounding:
From the solid metal tip right down to the base of the high gain antennas the grounding crosssection is 22 mm2 copper or more, exceeding EN 50083-1.
3033 mm
Max. power
7°
736 347
3
dB
10
0
Vertical Pattern
Mechanical specifications Input
um maximtop mast
230
Connector position
736 347
736 348
7-16 female
7-16 female
Bottom
Top
Weight
8 kg
150
Radome diameter Wind load Max. wind velocity Packing size
51 mm 210 N (at 150 km/h) 200 km/h 3316 x 148 x 112 mm
104
Height
Brackets for side mounting (see page 182 – 184)
3033 mm
3022 mm
129
Omnidirectional Antenna Vertical Polarization
900 V
• Special base
VPol Omni 900 360° 11dBi Type No.
738 779
Frequency range
870 – 960 MHz
Polarization
Vertical
Gain
11 dBi 50 Ω
Impedance VSWR
< 1.5 < –150 dBc
Max. power
3254 mm
Intermodulation IM3 (2 x 43 dBm carrier)
500 Watt (at 50 °C ambient temperature)
Mounting:
The antenna can be attached in two ways with the supplied mounting kit: 1. On the tip of a tubular mast of 65 – 105 mm diameter (connecting cable runs inside the mast). 2. Laterally at the tip of a tubular mast of 30 – 90 mm diameter (connecting cable runs outside the mast).
Material:
Radiator: Copper and brass. Radome: Fiberglass, colour: Grey. Base: Weather-proof aluminum. Mounting kit, screws and nuts: Stainless steel.
Grounding:
The antenna is DC grounded via a copper tube having a cross-sectional area of 22 mm2. The inner conductor is coupled capacitively.
7°
3
dB
10
0
Vertical Pattern
Mechanical specifications Input Connector position
Bottom
Weight
8.5 kg
Radome diameter Wind load Max. wind velocity Packing size On the tip
Laterally at the tip
Brackets for side mounting (see page 182 – 184)
7-16 female
Height
51 mm 215 N (at 150 km/h) 200 km/h 3440 x 198 x 152 mm 3254 mm
130
Omnidirectional Antenna Vertical Polarization
900 V
• Lightning rod
VPol Omni 900 360° 11dBi Type No.
736 352
Frequency range
870 – 960 MHz
Polarization
Vertical
Gain
11 dBi 50 Ω
Impedance VSWR
< 1.5
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc 500 Watt (at 50 °C ambient temperature)
Mounting:
The antenna can be attached laterally at the tip of a tubular mast of 50 – 94 mm diameter with two U-bolt brackets supplied with the antenna (connecting cable runs outside the mast).
Material:
Radiator: Copper and brass. Radome: Fiberglass, colour: Grey. Base: Weather-proof aluminum. Mounting kit, screws and nuts: Stainless steel.
Excellent grounding:
From the solid metal tip right down to the base of the high gain antennas the grounding crosssection is 22 mm2 copper or more, exceeding EN 50083-1.
3233 mm
Max. power
7°
3
dB
10
0
Vertical Pattern
Mechanical specifications Input
230
um maximtop mast
Connector position
Bottom
Weight
8.5 kg
Radome diameter
150
7-16 female
Wind load Max. wind velocity Packing size
51 mm 220 N (at 150 km/h) 200 km/h 3504 x 188 x 122 mm
104
Height
3233 mm
131
Omnidirectional Antennas Vertical Polarization Fixed Electrical Downtilt
900 V 5°
VPol Omni 900 360° 10.5dBi 5°T
736 349
Type No. Frequency range
738 664
870 – 960 MHz
Polarization
Vertical
Gain
10.5 dBi
Electrical tilt
5°, fixed
Impedance
50 Ω
VSWR
< 1.5 < –150 dBc
Max. power
2954 mm
Intermodulation IM3 (2 x 43 dBm carrier)
500 Watt (at 50 °C ambient temperature)
Mounting:
The antenna can be attached laterally at the tip of a tubular mast of 50 – 94 mm diameter with two U-bolt brackets supplied with the antenna (connecting cable runs outside the mast).
Material:
Radiator: Copper and brass. Radome: Fiberglass, colour: Grey. Base: Weather-proof aluminum. Mounting kit, screws and nuts: Stainless steel.
Excellent grounding:
From the solid metal tip right down to the base of the high gain antennas the grounding crosssection is 22 mm2 copper or more, exceeding EN 50083-1.
7°
736 349
3
dB
10
0
Vertical Pattern 5° electrical downtilt
Mechanical specifications Input
um maximtop mast
230
Connector position
736 349
738 664
7-16 female
7-16 female
Bottom
Top
Weight
8 kg
150
Radome diameter Wind load Max. wind velocity Packing size
51 mm 210 N (at 150 km/h) 200 km/h 3316 x 148 x 112 mm
104
Height
Brackets for side mounting (see page 182 – 184)
2954 mm
2856 mm
132
Dual-band Omnidirectional Antenna Vertical Polarization Indoor and outdoor use
900/1800 V
VPol Omni 900/1800 360° 2dBi
738 449
Type No. Input
N female
Connector position
Bottom or top 870 – 960 MHz / 1710 – 1880 MHz
VSWR
< 1.7
Gain
2 dBi
Impedance
50 Ω
Polarization
Vertical
Max. power
50 Watt: 870 – 960 MHz 50 Watt: 1710 – 1880 MHz (at 50 °C ambient temperature)
Weight
250 g
Radome diameter
20 mm
Height
216 mm
Material:
Radiator: Brass. Radome: Fiberglass, colour: White.
Mounting:
One hole mounting (16 mm diameter) to surfaces of max. 10 mm thickness.
216 mm
Frequency range
78°
3
dB
10
0
Vertical Pattern
133
Omnidirectional Antenna Vertical Polarization
1800 V
VPol Omni 1800 360° 8dBi
739 785
Type No. Frequency range
1710 – 1880 MHz Vertical
Gain
8 dBi
Impedance
50 Ω
VSWR
807 mm
Polarization
< 1.5
Intermodulation IM3 (2 x 43 dBm carrier)
< –150 dBc
Max. power
200 Watt (at 50 °C ambient temperature)
Mounting:
The antenna can be attached laterally at the tip of a tubular mast of 50 – 94 mm diameter with one U-bolt bracket supplied with the antenna (connecting cable runs outside the mast).
Material:
Radiator: Copper and brass. Radome: Fiberglass, colour: Grey. Base: Weather-proof aluminum. Mounting kit, screws and nuts: Stainless steel.
Excellent grounding:
From the solid metal tip right down to the base of the high gain antennas the grounding crosssection is 22 mm2 copper or more, exceeding EN 50083-1.
13°
3
dB
10
0
Vertical Pattern
Mechanical specifications Input 130
um maximtop mast
Connector position Weight Radome diameter
104
Wind load Max. wind velocity Packing size Height
Brackets for side mounting (see page 182 – 184)
7-16 female Bottom 4 kg 51 mm 90 N (at 150 km/h) 200 km/h 986 x 148 x 112 mm 807 mm
134
Omnidirectional Antennas Vertical Polarization
1800 V
VPol Omni 1800 360° 11dBi
738 187
Type No. Frequency range
739 404
1710 – 1880 MHz
Polarization
Vertical
Gain
11 dBi 50 Ω
Impedance
< 1.3
Intermodulation IM3 (2 x 43 dBm carrier)
1568 mm
VSWR
< –150 dBc
Max. power
200 Watt (at 50 °C ambient temperature)
Mounting:
The antenna can be attached laterally at the tip of a tubular mast of 50 – 94 mm diameter with two U-bolt brackets supplied with the antenna (connecting cable runs outside the mast).
Material:
Radiator: Copper and brass. Radome: Fiberglass, colour: Grey. Base: Weather-proof aluminum. Mounting kit, screws and nuts: Stainless steel.
Excellent grounding:
From the solid metal tip right down to the base of the high gain antennas the grounding crosssection is 22 mm2 copper or more, exceeding EN 50083-1.
738 187
7°
3
dB
10
0
Vertical Pattern
Mechanical specifications Input
um maximtop mast
230
Connector position
738 187
739 404
7-16 female
7-16 female
Bottom
Top
Weight
5.5 kg
150
Radome diameter Wind load Max. wind velocity Packing size
51 mm 130 N (at 150 km/h) 200 km/h 1846 x 148 x 112 mm
104
Height
Brackets for side mounting (see page 182 – 184)
1568 mm
1558 mm
135
Omnidirectional Antenna Vertical Polarization Fixed Electrical Downtilt
1800 V 6°
VPol Omni 1800 360° 11dBi 6°T
737 190
Type No. Frequency range
1710 – 1880 MHz
Polarization
Vertical
Gain
11 dBi 6°, fixed
Impedance
50 Ω
VSWR
< 1.3
Intermodulation IM3 (2 x 43 dBm carrier)
1560 mm
Electrical tilt
< –150 dBc
Max. power
200 Watt (at 50 °C ambient temperature)
Mounting:
The antenna can be attached laterally at the tip of a tubular mast of 50 – 94 mm diameter with two U-bolt brackets supplied with the antenna (connecting cable runs outside the mast).
Material:
Radiator: Copper and brass. Radome: Fiberglass, colour: Grey. Base: Weather-proof aluminum. Mounting kit, screws and nuts: Stainless steel.
Excellent grounding:
From the solid metal tip right down to the base of the high gain antennas the grounding crosssection is 22 mm2 copper or more, exceeding EN 50083-1.
7°
3
dB
10
0
Vertical Pattern 6° electrical downtilt
Mechanical specifications Input
230
um maximtop mast
Connector position
Bottom
Weight
5.5 kg
Radome diameter
150
7-16 female
Wind load Max. wind velocity Packing size
51 mm 130 N (at 150 km/h) 200 km/h 1846 x 148 x 112 mm
104
Height
Brackets for side mounting (see page 182 – 184)
1560 mm
136
Omnidirectional Antenna Vertical Polarization Indoor and outdoor use
1710 –2170 V
VPol Omni 1710–2170 360° 2dBi
738 454
Type No. Input
N female
Connector position
Bottom or top 1710 – 2170 MHz
VSWR
< 1.5
Gain
2 dBi
Impedance
50 Ω
Polarization
Vertical
Max. power
50 Watt (at 50 °C ambient temperature)
Weight
150 g
Radome diameter
20 mm
Height
115 mm
Material:
Radiator: Brass. Radome: Fiberglass, colour: White.
Mounting:
One hole mounting (16 mm diameter) to surfaces of max. 10 mm thickness.
Grounding:
All metal parts of the antenna and the mounting kit are DC grounded. The inner conductor is not DC grounded.
115 mm
Frequency range
78°
3
dB
10
0
Vertical Pattern
137
Omnidirectional Antenna Vertical Polarization
2000 V
VPol Omni 2000 360° 11dBi
741 790
Type No. Frequency range
1920 – 2170 MHz
Polarization
Vertical
Gain
11 dBi 50 Ω
Impedance
< 1.5
Intermodulation IM3 (2 x 43 dBm carrier)
1387 mm
VSWR
< –150 dBc
Max. power
150 Watt (at 50 °C ambient temperature)
Mounting:
The antenna can be attached laterally at the tip of a tubular mast of 50 – 94 mm diameter with one U-bolt bracket supplied with the antenna (connecting cable runs outside the mast).
Material:
Radiator: Copper and brass. Radome: Fiberglass, colour: Grey. Base: Weather-proof aluminum. Mounting kit, screws and nuts: Stainless steel.
Excellent grounding:
From the solid metal tip right down to the base of the high gain antennas the grounding crosssection is 22 mm2 copper or more, exceeding EN 50083-1.
7°
3
dB
10
0
Vertical Pattern
Mechanical specifications Input 130
um maximtop mast
Connector position Weight Radome diameter
104
Wind load Max. wind velocity Packing size Height
Brackets for side mounting (see page 182 – 184)
7-16 female Bottom 5 kg 51 mm 120 N (at 150 km/h) 200 km/h 1570 x 148 x 112 mm 1387 mm
138
Indoor Antennas
These antennas have a particularly unobtrusive appearance. Apart from standard single band antennas, multi-band versions are also available. Single-band antennas The λ/2 omnidirectional antenna for normal ceiling mounting purposes does not need an additional groundplane. Only a single hole is required. For thicker ceilings a mounting plate is supplied. The extremely flat directional antenna is supplied with a mounting plate for attachment to a wall. The antenna is inserted into the plate and clicks in. Multi-band antennas The low silhouette omnidirectional and directional antennas for AMPS, GSM, PCN, DECT, PCS and UMTS in combination with broadband power splitters enable compact and inexpensive indoor networks to be installed. Indoor / Outdoor antennas Unobtrusive omni antennas for both 900 and 1800 and also dual-band are now available especially for microcell applications. These versions are similar to our Indoor Antennas, but are suitable for outdoor operation and are fitted with an N connector.
139
Summary – Indoor Antennas
Vertical Polarization
Single-band Type
Type No.
Frequency range
Connector female
Page
VPol Indoor 900
90° 7 dBi
736 624
870 – 960 MHz
N
141
VPol Indoor 900
360° 2 dBi
737 031
870 – 960 MHz
N
142
VPol Indoor 1800
90° 8 dBi
736 935
1710 – 1900 MHz
N
143
VPol Indoor 1800
360° 2 dBi
736 361
1710 – 1900 MHz
N
144
VPol BiDir 800/2000
65° 5 dBi
738 446
824 – 960 MHz and 1710 – 2170 MHz
N
145
VPol Indoor 800/1900
90° 7 dBi
738 573
824 – 960 MHz and 1710 – 1990 MHz
N
146
VPol Indoor 800/2000
90° 7 dBi
742 149
824 – 960 MHz and 1710 – 2170 MHz
N
147
VPol Indoor 900/2000
360° 2 dBi
741 571
876 – 960 MHz and 1710 – 2170 MHz
N
148
VPol Indoor 800/2000
360° 2 dBi
741 572
824 – 960 MHz and 1425 – 2170 MHz
N
148
738 450
870 – 960 MHz
N
149
Multi-band
Indoor / Outdoor – Single-band VPol Omni 900
360° 2 dBi
Indoor / Outdoor – Dual-band / Multi-band VPol Omni 900/1800
360° 2 dBi
738 449
870 – 960 MHz and 1710 – 1880 MHz
N
150
VPol Omni 1710–2170
360° 2 dBi
738 454
1710 – 2170 MHz
N
151
New Product
140
Indoor Directional Antenna Vertical Polarization Half-power Beam Width
900 V 90°
• Flat design
VPol Indoor 900 90° 7dBi
736 624
Type No. Input
Cable RG 223/CU of 1m length, white, with N female connector
Frequency range
870 – 960 MHz
VSWR
< 1.5
Gain
7 dBi
Impedance
50 Ω
Half-power beam width
H-plane: 90°/ E-plane: 65°
Polarization
Vertical
Max. power
50 Watt (at 50 °C ambient temperature)
Weight
500 g
Material:
Mounting:
Grounding:
205 / 155 / 32 mm Radiator: Brass. Radome: ABS, colour: White. Reflector: Aluminum. Mounting plates: Stainless steel. Two holes of 6 mm diameter in the mounting plate are provided for this purpose. All metal parts as well as the inner conductor are DC grounded.
90°
10
3
dB
Height/width/depth
0
Horizontal Pattern
65°
3
dB
10
0
Vertical Pattern
Mounting:
Mounting the attachment plate
Aligning the antenna
Pulling the antenna downwards
Mount the attachment plate to the wall using two screws of 4 mm diameter in the position as indicated.
Align the antenna over the attachment plate, keeping the cable in the middle of the plate.
Pull the antenna downwards until it clicks into place.
141
Indoor Omnidirectional Antenna Vertical Polarization Single-band
900 V
• The antenna needs no additional groundplane.
VPol Indoor 900 360° 2dBi
737 031
Type No. Input
Cable RG 223/CU of 1m length, white, with N female connector
Frequency range
870 – 960 MHz
VSWR
< 1.5
Gain
2 dBi
Impedance
50 Ω
Polarization
Vertical
Max. power
50 Watt (at 50 °C ambient temperature)
Weight
200 g
Radome diameter
20 mm
Mounting plate
115 x 25 mm
Height
201 mm
Material:
Radiator: Brass. Radome: Fiberglass, colour: White. Additional mounting plate: Aluminum.
Mounting:
Two holes of 5.5 mm diameter in the mounting plate.
Grounding:
All metal parts inclusive the inner conductor are DC grounded.
Min. Ø 22
Ceiling
Mounting plate Ø 5.5
90
142
Indoor Directional Antenna Vertical Polarization Half-power Beam Width
1800 V 90°
• Flat design
VPol Indoor 1800 90° 8dBi
736 935
Type No.
Cable RG 223/CU of 1m length, white, with N female connector
Frequency range
1710 – 1900 MHz
VSWR
< 1.5
Gain
8 dBi
Impedance
50 Ω
Polarization
Vertical
Front-to-back ratio
> 18 dB
Half-power beam width Max. power
H-plane: 90° / E-plane: 65° 25 Watt (at 50 °C ambient temperature)
Weight
200 g
Packing size Height/width/depth Material:
90°
290 x 105 x 30 mm 159 / 94 / 23 mm Radiator: Brass. Radome: ABS, colour: White. Reflector: Aluminum. Mounting plates: Stainless steel.
10
3
dB
Input
0
Mounting:
Two holes of 6 mm diameter in the mounting plate.
Grounding:
All metal parts inclusive the inner conductor are DC grounded.
Horizontal Pattern
65°
3
dB
10
0
Vertical Pattern
Mounting:
Mount the attachment plate to the wall using two screws of 4 mm diameter in the position as indicated.
Align the antenna over the attachment plate, keeping the cable in the middle of the plate.
Pull the antenna downwards until it clicks into place.
143
Indoor Omnidirectional Antenna Vertical Polarization Single-band
1800 V
• The antenna needs no additional groundplane.
VPol Indoor 1800 360° 2dBi
736 361
Type No. Input
Cable RG 223/CU of 1m length, white, with N female connector
Frequency range
1710 – 1900 MHz
VSWR
< 1.5
Gain
2 dBi
Impedance
50 Ω
Polarization
Vertical
Max. power
25 Watt (at 50 °C ambient temperature)
Weight
120 g
Radome diameter
20 mm
Mounting plate
115 x 25 mm
Packing size
app. 250 x 130 x 25 mm
Height
121 mm
Material:
Radiator: Brass. Radome: Fiberglass, colour: White. Additional mounting plate: Aluminum.
Mounting:
Two holes of 5.5 mm diameter in the mounting plate.
Grounding:
All metal parts inclusive the inner conductor are DC grounded.
Min. Ø 22
Ceiling
Mounting plate Ø 5.5
90
144
Multi-band Bidirectional Antenna Vertical Polarization Half-power Beam Width
800/2000 V 65°
VPol BiDir 800/2000 65° 5dBi
738 446
Type No. Input
1 x N female
Frequency range
824 – 960 MHz, 1710 – 2170 MHz < 1.5 824 – 960 MHz: 5 dBi 1710 – 1880 MHz: 5.5 dBi 1880 – 2170 MHz: 6.5 dBi
Impedance
50 Ω
Polarization
Vertical
Max. power (total)
372 mm
Gain
400 mm
VSWR
200 Watt (at 50 °C ambient temperature)
Weight
0.8 kg
Wind load
Frontal: Lateral: Rearside:
Max. wind velocity
25 N (at 150 km/h) 65 N (at 150 km/h) 35 N (at 150 km/h) 200 km/h
Packing size
422 x 212 x 95 mm
Height/width/depth
310 / 55 / 190 mm
Material:
Radiator: Tin plated copper. Reflector: Weather-proof aluminum. Radome: High impact plastic, colour: Grey. All screws and nuts: Stainless steel.
Mounting:
Wall mounting: No additional mounting kit needed. For pipe mast mounting use clamps listed below (order separately).
Ice protection:
The radiating system is protected by the radome. Due to its very sturdy construction, the antenna remains operational even under icy conditions.
Grounding:
All metal parts of the antenna as well as the inner conductor are DC grounded.
8.5 mm
3
dB
10
0
Typical Horizontal Pattern
145
Indoor Directional Antenna Vertical Polarization Half-power Beam Width
800/1800 V 90°
• Flat design • The antenna can be operated in all frequency ranges simultaneously.
VPol Indoor 900/1800 90° 7dBi
738 573
Type No. Input Frequency range VSWR
Cable RG 223/CU of 1m length, white, with N female connector 824 – 960 MHz / 1710 – 1990 MHz 870 – 960 MHz and 1710 – 1900 MHz: < 1.6 824 – 960 MHz and 1710 – 1990 MHz: < 2.0 ≈ 7 dBi
Gain
50 Ω
Impedance
Horizontal: ≈ 90°
Half-power beam width Polarization
Vertical
Max. power
25 Watt (at 50 °C ambient temperature)
Weight
500 g
Packing size
321 x 165 x 50 mm
Height/width/depth
205 / 155 / 42 mm
Material:
Radiator: Brass. Radome: ABS, colour: White. Reflector: Aluminum. Mounting plates: Stainless steel.
Mounting:
Two holes of 6 mm diameter in the mounting plate.
Grounding:
All metal parts inclusive the inner conductor are DC grounded.
Available accessories:
Broadband power splitter (800 – 2200 MHz).
90°
3
dB
10
0
Horizontal Pattern
Mounting:
Mount the attachment plate to the wall using two screws of 4 mm diameter in the position as indicated.
Align the antenna over the attachment plate, keeping the cable in the middle of the plate.
Pull the antenna downwards until it clicks into place.
146
Indoor Directional Antenna Vertical Polarization Half-power Beam Width ● ●
800/2000 V 90°
Flat design The antenna can be operated in all frequency ranges simultaneously.
VPol Indoor 800/2000 90° 7dBi
742 149
Type No. Input Frequency range VSWR
Cable RG 223/CU of 1m length, white, with N female connector 824 – 960 MHz / 1710 – 2170 MHz 870 – 960 MHz and 1710 – 1900 MHz: < 1.6 824 – 960 MHz and 1710 – 2170 MHz: < 2.0 ≈ 7 dBi
Gain
50 Ω
Impedance
Horizontal: ≈ 90°
Half-power beam width Polarization
Vertical
Max. power
25 Watt (at 50 °C ambient temperature)
Weight
500 g
Packing size
321 x 165 x 50 mm
Height/width/depth
205 / 155 / 42 mm
Material:
Radiator: Brass. Radome: ABS, colour: White. Reflector: Aluminum. Mounting plates: Stainless steel.
Mounting:
Two holes of 6 mm diameter in the mounting plate.
Grounding:
All metal parts inclusive the inner conductor are DC grounded.
Available accessories:
Broadband power splitter (800 – 2200 MHz).
90°
3
dB
10
0
Horizontal Pattern
Mounting:
Mount the attachment plate to the wall using two screws of 4 mm diameter in the position as indicated.
Align the antenna over the attachment plate, keeping the cable in the middle of the plate.
Pull the antenna downwards until it clicks into place.
147
Indoor Omnidirectional Antennas Vertical Polarization Multi-band
800/2000 V
The antenna can be operated in all frequency ranges simultaneously. ● The antennas need no additional groundplane. ●
741 572: Indoor 800/2000 360° 2dBi 741 571: Indoor 900/2000 360° 2dBi Type No. Frequency range VSWR
∅ 260 mm
741 572
741 571
824 – 960 MHz 1425 – 2170 MHz
876 – 960 MHz 1710 – 2170 MHz
< 2.0: 824 – 960 MHz < 2.0: 1425 – 1710 MHz < 1.6: 1710 – 1990 MHz < 2.0: 1990 – 2170 MHz
< 1.8: 876 – 890 MHz < 1.6: 890 – 960 MHz < 1.6: 1710 – 1990 MHz < 2.0: 1990 – 2170 MHz
Input
1 x N female
Gain
2 dBi
Impedance
50 Ω
Polarization
741 572
Vertical
Max. power (per band)
50 Watt (at 50 °C ambient temperature)
Weight Diameter Height
400 g
300 g
260 mm
210 mm
78 mm (without connector)
Material:
Base: Aluminum. Protective housing: High impact polystyrol, colour: White. Additional painting is possible.
Mounting:
Three holes in the base enable a mounting on the ceiling. Two types of screws are supplied. For the N connector a hole in the ceiling with a diameter of 35 mm is required.
Grounding:
All metal parts including the inner conductor are DC grounded.
Available accessories:
Broadband power splitters and tappers (800 – 2200 MHz).
min. dia. 35 mm
3 holes dia. 5 mm
dia. 160 mm
N connector, female
13 mm
Clip the protective housing into position after the antenna has been mounted with the help of the three supplied screws.
148
Omnidirectional Antenna Vertical Polarization Indoor and outdoor use
900 V
VPol Omni 900 360° 2dBi
738 450
Type No. Input
N female
Connector position
Bottom or top 870 – 960 MHz
VSWR
< 1.5
Gain
2 dBi
Impedance
50 Ω
Polarization
Vertical
Max. power
100 Watt (at 50 °C ambient temperature)
Weight
200 g
Radome diameter
20 mm
Height
180 mm
Material:
Radiator: Brass. Radome: Fiberglass, colour: White.
Mounting:
One hole mounting (16 mm diameter) to surfaces of max. 10 mm thickness.
Grounding:
All metal parts of the antenna as well as the inner conductor and the mounting kit are DC grounded.
180 mm
Frequency range
78°
3
dB
10
0
Vertical Pattern
149
Dual-band Omnidirectional Antenna Vertical Polarization Indoor and outdoor use
900/1800 V
VPol Omni 900/1800 360° 2dBi
738 449
Type No. Input
N female
Connector position
Bottom or top 870 – 960 MHz / 1710 – 1880 MHz
VSWR
< 1.7
Gain
2 dBi
Impedance
50 Ω
Polarization
Vertical
Max. power
50 Watt: 870 – 960 MHz 50 Watt: 1710 – 1880 MHz (at 50 °C ambient temperature)
Weight
250 g
Radome diameter
20 mm
Height
216 mm
Material:
Radiator: Brass. Radome: Fiberglass, colour: White.
Mounting:
One hole mounting (16 mm diameter) to surfaces of max. 10 mm thickness.
216 mm
Frequency range
78°
3
dB
10
0
Vertical Pattern
150
Omnidirectional Antenna Vertical Polarization Indoor and outdoor use
1710 –2170 V
VPol Omni 1710–2170 360° 2dBi
738 454
Type No. Input
N female
Connector position
Bottom or top 1710 – 2170 MHz
VSWR
< 1.5
Gain
2 dBi
Impedance
50 Ω
Polarization
Vertical
Max. power
50 Watt (at 50 °C ambient temperature)
Weight
150 g
Radome diameter
20 mm
Height
115 mm
Material:
Radiator: Brass. Radome: Fiberglass, colour: White.
Mounting:
One hole mounting (16 mm diameter) to surfaces of max. 10 mm thickness.
Grounding:
All metal parts of the antenna and the mounting kit are DC grounded. The inner conductor is not DC grounded.
115 mm
Frequency range
78°
3
dB
10
0
Vertical Pattern
151
152
Low-loss Power Splitters and Tappers
Low-loss power splitters and tappers are used for combining antennas to obtain particular radiation patterns or to set up indoor distribution networks. Power splitters with the following features are available: – low-loss coaxial-line transformation – high power rating – equal (splitters) or unequal (tappers) power rating – suitability for indoor and outdoor use – extremely small dimensions – multi-band versions for 800 – 2200 MHz.
153
Summary – Low-loss Power Splitters
Type
2-way-Splitter 2-way-Splitter 3-way-Splitter 3-way-Splitter 4-way-Splitter 4-way-Splitter
Type No.
800/900 800/900 800/900 800/900 800/900 800/900
2-way-Splitter 1400/1900 3-way-Splitter 1400/1900 2-way-Splitter 2-way-Splitter 3-way-Splitter 3-way-Splitter 4-way-Splitter 4-way-Splitter
800–2200 800–2200 800–2200 800–2200 800–2200 800–2200
2-way-Splitter 800–2200 3-way-Splitter 800–2200 4-way-Splitter 800–2200
K K K K K K
63 63 63 63 63 63
20 20 20 20 20 20
62 62 63 63 64 64
Frequency range 1 7 1 7 1 7
K 63 55 8 K 63 56 8 737 737 737 737 737 737
303 304 305 306 307 308
K 63 22 62 1 K 63 22 63 1 K 63 22 64 1
790 790 790 790 790 790
– – – – – –
960 960 960 960 960 960
MHz MHz MHz MHz MHz MHz
Remark
Indoor/Outdoor 500 W Indoor/Outdoor 1000 W Indoor/Outdoor 500 W Indoor/Outdoor 1000 W Indoor/Outdoor 500 W Indoor/Outdoor 1000 W
1425 – 2000 MHz Indoor/Outdoor 1425 – 2000 MHz Indoor/Outdoor 800 800 800 800 800 800
– – – – – –
2200 2200 2200 2200 2200 2200
MHz MHz MHz MHz MHz MHz
800 – 2200 MHz 800 – 2200 MHz 800 – 2200 MHz
Max. power
Indoor/Outdoor Indoor/Outdoor Indoor/Outdoor Indoor/Outdoor Indoor/Outdoor Indoor/Outdoor
Connector Page female N 7-16 N 7-16 N 7-16
155 155 155 155 155 155
700 W 700 W
7-16 7-16
156 156
200 700 200 700 200 700
N 7-16 N 7-16 N 7-16
157 157 157 157 157 157
N N N
158 158 158
W W W W W W
Indoor Indoor Indoor
100 W 100 W 100 W
Remark
Max. power
New Products
Summary – Low-loss Power Tappers
Type
Type No.
2-way-Tapper 1800/1900 4.8/1.8 dB 2-way-Tapper 1800/1900 6.0/1.2 dB 2-way-Tapper 1800/1900 7.0/1.0 dB
737 965 737 966 737 967
Frequency range
1710 – 2000 MHz Indoor/Outdoor 1710 – 2000 MHz Indoor/Outdoor 1710 – 2000 MHz Indoor/Outdoor
2-way-Tapper 800–2200 7.0/1.0 dB K 63 23 60 61 2-way-Tapper 800–2200 10.4/0.4 dB K 63 23 61 01 2-way-Tapper 800–2200 15.1/0.1 dB K 63 23 61 51
800 – 2200 MHz 800 – 2200 MHz 800 – 2200 MHz
Indoor Indoor Indoor
2-way-Tapper 800–2200 7.0/1.0 dB K 63 23 60 67 2-way-Tapper 800–2200 10.4/0.4 dB K 63 23 61 07 2-way-Tapper 800–2200 15.1/0.1 dB K 63 23 61 57
800 – 2200 MHz Indoor/Outdoor 800 – 2200 MHz Indoor/Outdoor 800 – 2200 MHz Indoor/Outdoor
Connector Page female
700 W 700 W 700 W
7-16 7-16 7-16
159 159 159
100 W 100 W 100 W
N N N
160 160 160
500 W 500 W 500 W
7-16 7-16 7-16
161 161 161
154
Low-loss Power Splitters 790 – 960 MHz Indoor and outdoor use
2-way-Splitter 800/900 3-way-Splitter 800/900 4-way-Splitter 800/900 Type No.
K 63 20 62 1
K 63 20 62 7
K 63 20 63 1
K 63 20 63 7
K 63 20 64 1
K 63 20 64 7
N 500 W
7-16 1000 W
N 500 W
7-16 1000 W
N 500 W
7-16 1000 W
Connector (female) Max. power at 50 °C ambient temperature For connecting ... antennas Frequency range VSWR Impedance Insertion loss Weight Packing size Max. size
2
3 790 – 960 MHz < 1.1 50 Ω < 0.05 dB appr. 1.3 kg 240 x 93 x 107 mm 210 / 80 / 80 mm
Material:
Housing: Aluminum. Inner conductor: Brass.
Mounting:
Bracket for wall mounting included in the scope of supply: For pipe mast mounting use clamps listed below (order separately).
DC capability:
DC transmission between all terminations (suitable for remote power supply systems).
4
Input K 63 20 64 7
Clamps (order separately) Type No. 736 736 736 736 736
801 802 803 804 805
Description 1 1 1 1 1
clamp clamp clamp clamp clamp
Remarks Mast: Mast: Mast: Mast: Mast:
34 60 80 100 120
– – – – –
60 80 100 120 140
mm mm mm mm mm
diameter diameter diameter diameter diameter 736 805
155
Low-loss Power Splitters 1425 – 2000 MHz Indoor and outdoor use
2-way-Splitter 1400/1900 3-way-Splitter 1400/1900 4-way-Splitter 1400/1900 Type No. Connector (female) Max. power (at 50 °C ambient temperature) For connecting ... antennas Frequency range VSWR Impedance Insertion loss Weight Packing size Max. size
K 63 55 8
K 63 56 8
7-16 700 W
7-16 700 W
2
3 1425 – 2000 MHz < 1.1 50 Ω < 0.05 dB appr. 1.0 kg 185 x 93 x 107 mm 160 / 82 / 82 mm
Material:
Housing: Aluminum. Inner conductor: Brass.
Mounting:
Bracket for wall mounting included in the scope of supply. For pipe mast mounting use clamps listed below (order separately).
DC capability:
DC transmission between all terminations (suitable for remote power supply systems).
Input K 63 57 8
Clamps (order separately) Type No. 736 736 736 736 736
801 802 803 804 805
Description 1 1 1 1 1
clamp clamp clamp clamp clamp
Remarks Mast: Mast: Mast: Mast: Mast:
34 60 80 100 120
– – – – –
60 80 100 120 140
mm mm mm mm mm
diameter diameter diameter diameter diameter 736 805
156
Low-loss Power Splitters – Multi-band 800 – 2200 MHz Indoor and outdoor use
2-way-Splitter 800–2200 3-way-Splitter 800–2200 4-way-Splitter 800–2200 Type No. Connector (female) Max. power (at 50 °C ambient temperature) For connecting ... antennas Frequency range VSWR Impedance Insertion loss Weight Packing size Max. size
737 303
737 304
737 305
737 306
737 307
737 308
N 200 W
7-16 700 W
N 200 W
7-16 700 W
N 200 W
7-16 700 W
2
3 800 – 2200 MHz < 1.15 50 Ω < 0.05 dB appr. 1.5 kg 310 x 93 x 107 mm 294 / 82 / 82 mm
Material:
Housing: Aluminum. Inner conductor: Brass.
Mounting:
Bracket for wall mounting included in the scope of supply. For pipe mast mounting use clamps listed below (order separately).
DC capability:
DC transmission between all terminations (suitable for remote power supply systems).
4
Input 737 308
Clamps (order separately) Type No. 736 736 736 736 736
801 802 803 804 805
Description 1 1 1 1 1
clamp clamp clamp clamp clamp
Remarks Mast: Mast: Mast: Mast: Mast:
34 60 80 100 120
– – – – –
60 80 100 120 140
mm mm mm mm mm
diameter diameter diameter diameter diameter 736 805
157
Low-loss Power Splitters – Multi-band 800 – 2200 MHz Indoor use
2-way Splitter 800–2200 3-way Splitter 800–2200 4-way Splitter 800–2200 Type No. Connector Max. power For connecting ... antennas Frequency range VSWR Impedance Insertion loss Weight Profile cross-section Packing size Max. size
K 63 22 62 1
K 63 22 63 1
K 63 22 64 1
N female 100 W (at 50 °C ambient temperature) 2 3 4 800 – 2200 MHz < 1.25 < 1.25 < 1.3 50 Ω < 0.05 dB appr. 0.6 kg 25 x 25 mm 242 x 110 x 95 mm 204 / 63 / 41 mm
Material:
Housing: Aluminum. Inner conductor: Brass.
DC capability:
DC transmission between all terminations (suitable for remote power supply systems).
Input K 63 22 64 1
158
Low-loss Power Tappers 1710 – 2000 MHz Indoor and outdoor use
2-way-Tapper 1800/1900 4.8/1.8 dB 2-way-Tapper 1800/1900 6.0/1.2 dB 2-way-Tapper 1800/1900 7.0/1.0 dB Type No.
P2
737 965
Tap Loss Input ↔ P1 Input ↔ P2 Connectors Max. power For connecting ... antennas Phasedifference P1/P2 Frequency range VSWR Impedance Insertion loss Weight Packing size Max. size
737 966
737 967
– 1.8 dB – 4.8 dB
– 1.2 dB – 1.0 dB – 6.0 dB – 7.0 dB 7-16 female 700 Watt (at 50 °C ambient temperature) 2 g l = 35 mm 1710 – 2000 MHz < 1.1 50 Ω < 0.05 dB appr. 1.2 kg 240 x 93 x 107 mm 215 / 74 / 55 mm
Material:
Housing: Aluminum. Inner conductor: Brass.
Mounting:
Bracket for wall mounting included in the scope of supply. For pipe mast mounting use clamps listed below (order separately).
DC capability:
DC transmission between all terminations (suitable for remote power supply systems).
P1
Input 737 965
Clamps (order separately) Type No. 736 736 736 736 736
801 802 803 804 805
Description 1 1 1 1 1
clamp clamp clamp clamp clamp
Remarks 34 60 80 100 120
– – – – –
60 80 100 120 140
mm mm mm mm mm
diameter diameter diameter diameter diameter
736 805
159
Low-loss Power Tappers – Multi-band 800 – 2200 MHz Indoor use P1 2-way-Tapper 800–2200 7.0 /1.0dB 2-way-Tapper 800–2200 10.4/0.4dB 2-way-Tapper 800–2200 15.1/0.1dB
Tap Loss Input ↔ P1 Input ↔ P2 Connector Max. power For connecting ... antennas Frequency range VSWR Impedance Insertion loss Weight Profile cross-section Packing size Max. size
K 63 23 60 61
K 63 23 61 01 K 63 23 61 51
P2 – 1.0 dB – 7.0 dB
– 0.4 dB – 0.1 dB – 10.4 dB – 15.1 dB N female 100 W (at 50 °C ambient temperature) 2 800 – 2200 MHz < 1.5 50 Ω < 0.05 dB appr. 0.5 kg 25 x 25 mm 267 x 95 x 111 mm 244 / 64 / 25 mm
Material:
Housing: Aluminum. Inner conductor: Brass.
DC capability:
DC transmission only between input and port P1. P2 is coupled capacitively.
800 – 2200
Type No.
Input K 63 23 60 61
160
Low-loss Power Tappers – Multi-band 800 – 2200 MHz Indoor and outdoor use
2-way-Tapper 800–2200 7.0 /1.0dB 2-way-Tapper 800–2200 10.4/0.4dB 2-way-Tapper 800–2200 15.1/0.1dB Type No.
K 63 23 60 67
Tap Loss Input ↔ P1 Input ↔ P2 Connector Max. power For connecting ... antennas Frequency range VSWR Impedance Insertion loss Weight Max. size
P1 K 63 23 61 07 K 63 23 61 57
– 1.0 dB – 7.0 dB
– 0.4 dB – 0.1 dB – 10.4 dB – 15.1 dB 7-16 female 500 W (at 50 °C ambient temperature) 2 800 – 2200 MHz < 1.5 50 Ω < 0.05 dB appr. 1.3 kg 244 / 90 / 55 mm
Material:
Housing: Aluminum. Inner conductor: Brass.
DC capability:
DC transmission only between input and port P1. P2 is coupled capacitively.
Mounting:
Bracked for wall mounting included in the scope of supply. For pipe mast mounting use clamps listed below (order separately).
P2
Input K 63 23 60 67
Clamps (order separately) Type No. 736 736 736 736 736
801 802 803 804 805
Description 1 1 1 1 1
clamp clamp clamp clamp clamp
Remarks Mast: Mast: Mast: Mast: Mast:
34 60 80 100 120
– – – – –
60 80 100 120 140
mm mm mm mm mm
diameter diameter diameter diameter diameter 736 805
161
162
Accessories Mounting hardware and downtilt kits
163
Accessories
Page
Mounting Configurations
165
A-s / Eurocell s Dimensions
166
Three Sector Clamps and Masts
167
Clamps
168
Downtilt kits
170
F-s Dimensions
172
Detailed Connector Position
174
Clamps
175
Downtilt kits
177
Slant Compensation
179
Azimuth Adjustment Tools
180
Omnidirectional Antennas Clamp for larger Mast Diameters
182
Side-mounting Brackets
183
164
Mounting Configurations
Small Pipe Diameter
Large Pipe Diameter
Off-set
Flat Surface
Not applicable for Eurocell s with connector position rearside.
Standard Tilt
Off-set Tilt
165
A-s / Eurocell s Antenna Dimensions 72
A B C
256 mm 310 mm 350 mm
64 9
A-s with 65° and 90° Half-power Beam Width 656 mm 1296 mm 1936 mm 2580 mm 710 mm 1350 mm 1990 mm 2634 mm 750 mm 1390 mm 2030 mm 2674 mm
A Corresponds with the antenna height mentioned in the technical data.
A
B
C
B
C
Bottom view
+45°
-45°
116
58
262
72 9
64
Eurocell s A B C
264 mm –– ––
654 mm 974 mm 1294 mm 1934 mm 2254 mm 2574 mm 710 mm 1030 mm 1350 mm 1990 mm 2310 mm 2630 mm 750 mm 1070 mm 1390 mm 2030 mm 2350 mm 2670 mm
A Corresponds with the antenna height mentioned in the technical data.
A
103
Top view
258
166
A-s – 3 Sector Arrangement Mounting Hardware 3 Sector Clamp Kit / Pipe Mast with Flange Base Slim and unobstrusive design Nearly cylindrical optical appearance with small outer diameter ● Suitable for all A-s (Single-band, Dual-band) ● ●
3 Sector Clamp Kit Type No. Angle between antennas Suitable for mast diameter Type No. of pipe mast (please order separately) Number of pieces
742 033
742 034
120° 114.3 mm 742 035
120° 139.7 mm 742 036
2 x 3 sector clamp 2 x 3 sector clamp 2 x mounting 2 x mounting clamp clamp Material – 3 sector clamp Hot-dip galvanized steel Hot-dip galvanized steel – Mounting Aluminum Aluminum clamp – Screws Stainless steel Stainless steel Outer diameter (Dout) of the 3 A- Arrangement 460 mm 482 mm 64 ± 0.5
9 Dout E
B
60 °
3 sector clamp
F
C
A
Mounting clamp D
Torque 8 Nm Bottom view without downtilt kit
Type No. A B 742 033 114.3 88 742 034 139.7 100 all dimensions in mm
C 217 236
D 207 228
E 49 49
F 45 45 D
742 036
114.3 mm
139.7 mm
6.3 mm 4 mm 3000 mm 3000 mm 210 mm 265 mm 14 ± 1 mm 19 ± 1 mm 170 mm 225 mm 6 6 18 ± 1 mm 18 ± 1 mm M16 x 100 mm M16 x 100 mm Quality min. 8.8 Quality min. 8.8 60 kg 55 kg S355 J2H (St 52-3N) DIN EN 10210-1 S235 JR G2 (RSt 37-2) DIN EN 10025
Maximum permissible load: According DIN 4131 and DIN 4132 Fatigue class K2
129 ± 2
Pipe diameter D according DIN 2448 Wall thickness pipe Pipe length Flange diameter Flange thickness S Hole circle diameter Number of holes Hole diameter Enclosed bolts thread x length Hot-dip galvanized steel Weight Material pipe mast Material flange base
742 035
S
Type No.
3000
Pipe Mast with Flange Base
18±1
170 210
225 265
742 035
742 036
167
A-s 30° Half-power Beam Width Mounting Hardware A-s with 30° Half-power Beam Width A B
∅ 11
656 mm 1296 mm 2580 mm 584 mm 1224 mm 2504 mm
A
B
A Corresponds with the antenna height mentioned in the technical data.
177
116
Side view
180.5 348 560 Bottom view
Clamps Type No.
Description
733 736 K 61 14 03 K 61 14 04 K 61 14 05
2 2 2 2
clamps clamps clamps clamps
Remarks Mast: Mast: Mast: Mast:
50 – 125 mm diameter 116 – 210 mm diameter 210 – 380 mm diameter 380 – 521 mm diameter
Weight Units per appr. antenna 5.9 4.6 6.5 9.4
kg kg kg kg
1 1 1 1
Pair of clamps K 61 14 03
Downtilt kits Antenna height 656 mm 1296 mm 2580 mm
Downtilt angle
Type No.
Weight
0 – 33° 0 – 16° 0 – 8°
733 695
3.4 kg
Downtilt kit 733 695
168
A-s 65° and 90° / Eurocell s Mounting Hardware Clamps Eurocell s Antenna height: 2574 mm
10
3
8
25
Eurocell s Eurocell s Antenna height: 654 mm Antenna height: 264 mm 974 mm 1294 mm 1934 mm 2254 mm and all A-s 65° and 90° 10 3
10
3
8
25 8
25
26
4
65 9 4 1274 1994 2234 54
25
74
Mast diameter
Type No.
Distance A mm
Weight appr.
Units per antenna
Small Pipe
28 – 64 mm
731 651
22 – 30
330 g
see sketch
Large Pipe
50 – 115 mm
738 546
19 – 24
1.0 kg
see sketch
2.0 2.6 4.0 5.3
see see see see
Description
A
Off-set
60 – 115 mm 115 – 210 mm 210 – 380 mm 380 – 521 mm
731 651
733 733 733 733
677 678 679 680
738 546
117 – 124 146 – 160 148 – 168 150 – 175
kg kg kg kg
sketch sketch sketch sketch
733 678
169
A-s / Eurocell s Mounting Hardware Downtilt kit Antenna height:
654 974 1294 1934 2254
mm mm mm mm mm
Use the downtilt kit together with the clamps (see page 167 and 169)
Screws supplied
3
0
12 69
15
2
0
Scale
Downtilt kit with scale
Downtilt angle Antenna height
Downtilt angle
Type No.
654 mm
0° – 30°
737 972
974 mm
0° – 21°
737 973
1294 mm
0° – 16°
737 974
1934 mm
0° – 11°
737 975
2254 mm
0° – 9°
–
Downtilt kit without scale* Type No.
Weight
737 978
appr. 2.8 kg
* Instructions to adjust the required downtilt angle are given in the datasheet or on the rearside of the antenna.
Mounting a downtilt kit enlarges the spacing between mast and antenna by 84 mm.
170
A-s / Eurocell s Mounting Hardware Downtilt kits Suitable for: A-s with an antenna height of 2580 mm
Eurocell s with an antenna height of 2574 mm
Screws supplied Screws supplied
3
0
12 69
15
2
0 3
0
12 69
15
Scale
2
0
Scale
Type No. 737 971 Downtilt angle: 0° – 8°
Type No. 737 976 Downtilt angle: 0° – 8°
The downtilt kits should only be mounted with two clamps 738 546
171
F- Accessories Dimensions of F-s with 33° Half-power Beam Width Dimensions [mm] (‘A’ corresponds to the antenna height given on the data sheet)
Front view
C
209
263
303
342
396
436
662
716
756
982
1036
1076
1302
1356
1396
1942
1996
2036
A B C
64 72
Top view Radome depth 59 mm 59
B
9
A
262
172
F- Accessories Dimensions of F-s with 60° – 105° / 160° Half-power Beam Width Dimensions [mm] (‘A’ corresponds to the antenna height given on the data sheet)
Front view
A
B
C
182
236
266
342
396
426
502
556
586
662
716
746
702
756
786
982
1036
1066
1302
1356
1386
1622
1676
1706
1942
1996
2026
2582
2636
2666
A B C
ø 8.5 35 64
69
49
36
Top view Antenna with subreflector
155 155
142
155
Top view radome depth 69 mm 25
Top view radome depth 49 mm 25
Top view radome depth 36 mm
173
F- Accessories Dimensions of F-s Detailed connector position Vertical Polarization 60° – 65° Half-power Beam Width
90° – 160° Half-power Beam Width
76
33° Half-power Beam Width
+45°/–45° Polarization
52
65° Half-power Beam Width
58
90° Half-power Beam Width
174
F- Accessories Clamps for F-s with 33° / 60° – 160° Half-power Beam Width
33° HPBW
60°–160° HPBW
33° Half-power Beam Width Type No.
Mast diameter
Weight
Units per antenna
738 546
50 – 115 mm
appr. 1 kg
2
60°–160° Half-power Beam Width Type No.
734 734 734 734 734 734
Mast diameter
360 34 – 60 361 60 – 80 362 80 – 100 363 100 – 120 364 120 – 140 365 45 – 125
738 546
mm mm mm mm mm mm
Antenna height 182 182 182 182 182 182
… … … … … …
1942 1942 1942 1942 1942 1942
Weight
Units per appr. antenna
mm mm mm mm mm mm
50 – 115 mm 182 ... 2582 mm
60 g 70 g 80 g 90 g 110 g 80 g
1 1 1 1 1 1
1 kg
2
Type No. 734 362
Type No. 738 546
175
F- Accessories Mounting Hardware 2 x F- Mounting Kit For arranging two F-s 65°, 90° side by side (on air combining). ● The mounting kit consists of two mounting plates. ●
2 x F- Mounting Kit Type No.
742 113
No of units Suitable for F-s 65°, 90° with max. height of Material Weight Mounting
2 2m Hot-dip galvanized steel approx. 1.6 kg Screws are supplied 270 101
∅9
64±0.5
∅9
12 18
19
41
20 10
75
10
116
15 15
45°
64±0.5
Configuration without mechanical downtilt
Configuration with mechanical downtilt
03 6
9 12
15
2
0
m
10 m
Use the 2 x F- Mounting Kit together with the following mounting accessories Type No. Description 738 733 733 733 733 737
546 677 678 679 680 978
1 1 1 1 1 1
clamp offset clamp offset clamp offset clamp offset clamp downtilt kit
Remarks Mast: 50 – 115 mm diameter Mast: 60 – 115 mm diameter Mast: 115 – 210 mm diameter Mast: 210 – 380 mm diameter Mast: 380 – 521 mm diameter Downtilt angle: depending on antenna height
Weight Units per appr. antenna 1.0 2.0 2.6 4.0 5.3 2.8
kg kg kg kg kg kg
For a three sector arrangement, use the mounting kit type no. 742 113 together with the three sector clamp (see page 167).
2 2 2 2 2 1
176
F- Accessories Downtilt Kit for F-s with 33° – 160 °Half-power Beam Width Antenna height:
342 662 982 1302 1622 1942 2582
mm mm mm mm mm mm mm
Use the downtilt kit together with 2 clamps 738 546 (see page 175).
Screws supplied
3
0
12 69 15
2
0
Scale
Downtilt kit with scale Antenna height
Downtilt angle
Type No.
342 mm
0° – 54°
–
662 mm
0 °– 30°
737 972
982 mm
0° – 21°
737 973
1302 mm
0° – 16°
737 974
1622 mm
0° – 13°
–
1942 mm
0° – 11°
737 975
2582 mm
0° – 8°
737 971
Downtilt kit without scale* Type No.
Weight
737 978
appr. 2.8 kg
* Instructions to adjust the required downtilt angle are given in the datasheet or on the rearside of the antenna.
Mounting a downtilt kit enlarges the spacing between mast and antenna by 84 mm. 177
F- Accessories Downtilt Kit for F-s with 60° – 160° Half-power Beam Width Antenna height:
342 502 662 982 1302
mm mm mm mm mm
Use the downtilt kit together with the clamps (see page 175).
Screws supplied
86 10 4 2
0
Scale
Downtilt kit with scale Antenna height
Downtilt angle
Type No.
342 mm
0° – 40°
–
502 mm
0° – 25°
732 322
662 mm
0° – 20°
732 321
982 mm
0° – 14°
732 318
1302 mm
0° – 10°
732 317
Downtilt kit without scale* Type No.
Weight
732 327
appr. 1.0 kg
* Instructions to adjust the required downtilt angle are given in the datasheet or on the rearside of the antenna.
Mounting a downtilt kit enlarges the spacing between mast and antenna by 42 mm. 178
F- Accessories Slant Compensation Kit for F-s with 60° – 160° Half-power Beam Width Type No. 732 319
Use the slant compensation kit type no. 732 319 together with the clamps (see page 175).
57 mm
77 mm
Weight: appr. 200 g
179
F- Accessories Azimuth Adjustment Tool for F-s with 60° – 160° Half-power Beam Width Type No. 735 700
Precise azimuth angle adjustment for mast mounted antennas can easily be achieved by using the azimuth adjustment tool.
target object
scale
ele co vat mp ion en sa
tio
n
fixing screws
Instruction: – Use a map to work out the angle between the designed antenna azimuth direction and target object (church, building, mountain peak) – Set this angle on the scale of the adjustment tool – Push the adjustment tool onto the antenna fixture and tighten the fixing screws – Use the telescope to aim at the target object, if necessary, use elevation compensation – Then rotate the antenna until the target object appears in the telescope objective.
180
A- / Eurocell / F- Accessories Azimuth Adjustment Tool Type No. 738 440 Precise azimuth adjustment for mast mounted antennas can easily be achieved by using the azimuth adjustment tool. Elevation This tool is suitable to all types of Eurocell s compensation • s Target object • A-s 65°/ 90° • F-s • XPol F-s Target object
Scale
F-
A- Clamping device
F- F-
Target object
XPol F- Scale
* Move the stopper to central position XPol F-
Clamping device Instruction: – Use a map to work out the angle between the designed antenna azimuth and target (church, building, mountain peak). – Set this angle on the scale of the adjustment tool. – Place the adjustment tool onto the antenna and tighten the clamping device. – Use the telescope to aim at the target object, if necessary, use elevation compensation. – Then rotate the antenna until the target object appears in the telescope. * Observe the position of the stopper when fitting the azimuth adjustment tool. 181
Side-mounting Clamp Omnidirectional Antennas Large Pipe Type No. 738 908
For mast diameters of 94 – 125 mm
Antenna
Mast
b a
b
182
Side-mounting Bracket Omnidirectional Antennas ∅D
Type No. 737 398 Side-mounting bracket (for mast diameters of 40 – 105 mm) Type No.
737 398
Bracket
At the top and at the bottom
Fits for antenna type no:
900 MHz 736 347 736 348 736 349 736 350 736 351 738 664
A
1800 MHz 739 785 738 187 739 404 737 190
Side-mounting is possible for four fixed distances between the tubular mast and the antenna:
900 MHz A = 100 mm = 0.3 λ
1800 MHz
(holes 1 and 3)
A = 160 mm = 0.5 λ
A = 240 mm = 0.75 λ
A = 80 mm = 0.5 λ A
A
A
A
(hole 2)
bracket
antenna
antenna-base mast
bracket hole 3 D
Pipe D
hole 1 D
Horizontal Radiation Pattern
Spacing A Curve
hole 3
hole 2
D
Pipe D
D
Horizontal Radiation Pattern
100 mm
Spacing A Curve
Pipe D Curve
Horizontal Radiation Pattern
Spacing A
100 mm 40 mm 100 mm
160 mm dB
3
3
0
0
direction from mast to antenna
80 mm
240 mm
direction from mast to antenna
dB
160 mm dB
40 mm
3
100 mm 240 mm
0
direction from mast to antenna
183
Side-mounting Brackets Omnidirectional Antennas 900 For mast diameters of 40 – 105 mm
Type No. Bracket
Fits for antenna type no.
K 61 33 5
K 61 33 6
at the bottom only
at both the top and the bottom øD
K 75 11 6 .. K 75 15 6 ..
738 779 741 558
Side mounting is possible for three fixed distances between the tubular mast and the antenna: 100 mm = 0.3 λ 160 mm = 0.5 λ 240 mm = 0.75 λ
Pipe D
Horizontal Radiation Pattern
Spacing A Curve
Additional gain to the nominal value of the antenna gain A
100 mm 2 dB
160 mm 3 dB
dB
40 mm
3
240 mm 2 dB
0
direction from mast to antenna 100 mm 2.5 dB
160 mm 3.5 dB
dB
100 mm
3
240 mm 0
2.5 dB
K 61 33 6
direction from mast to antenna
184
185
Sales queries, orders, catalogues or CD-ROM: Fax: (++49)8031/184-820 E-Mail: [email protected]
Technical Information:
Subject to alteration. 9986.276/0101/8/ZW/HA
Please for:
Fax: (++49)8031/184-973 E-Mail: [email protected]
Internet: http://www.kathrein.de KATHREIN-Werke KG . Telephone (++49)8031/184-0 . Fax (++49)8031/184-991 Anton-Kathrein-Straße 1 – 3 . P.O. Box 10 04 44 . D-83004 Rosenheim .
Antennen . Electronic
Related Documents 171j1w
Antenna 1z33w
July 2020 0
Antenna 1z33w
April 2020 39
Antenna 1z33w
July 2020 0
Antenna Comparisons 2z2i50
July 2020 0
Antenna Quiz 6q2k5b
November 2021 0
Antenna Catalogue 6g1y4l
December 2021 0More Documents from "Amit Singh Tomar" 4w3d6o
Gsm Timers 84o24
May 2020 14
Antenna 1z33w
July 2020 0
Idle Band Interference 4i5ne
May 2020 18
Discovery Of India.pdf 146b4j
November 2019 29
Locomotive Frame 4629w
December 2019 60