A5 Jgcreat Slice Software Manu 482e4e

A5 3D Printer JGcreat slice software manu

version：A0

一、JGcreatsoftware................................................................................................................................................................... 3

1.1 software setup......................................................................................................................................................... 3 1.2 software introduction.............................................................................................................................................. 4

2

一、JGcreat 1、Software

Software

installation

Double click software icon, enter setup iterface, setup procedure as below：

3

Click on“finish”，installation completed。

4

2、software introduction 1）turn on software：

5

2）add printer：

choice“A-5”

3）interface introduction：

file move

scale rotate mirror

model view Three types: solid, X ray, layers

6

7

model，choice print quality prefer，The lower right corner of the software shows "Slicing", that is to generate Gcode；

machine print material print qualtiy (higher quality longer printing time) set up printing parameter by yourself

different density for infill (higher density longer enable brim or raft around model enble print structure

8

After slicing is completed, the lower right corner of the software shows "Save to file".；

Click “Save File”

Copy the G-code to the USB stick, insert it to USB port on the A3S printer, and then select the gcode file to print through the touch screen. Note: Please refer to the JGcreat instructions document on the USB stick for how to operate the JGcreat software.

Shenzhen Aurora Technology Co., Ltd Headquarter Address: 5F Building 1 Longquan Technology Park, Tongsheng community, Dalang street Longhua district, Shenzhen, China 518109 Company homepage: www.jgaurora3d.com 9

Tel of after sales service center/ team: 0755-29735649 / 66607459 Email of : [email protected]

10